Commit Graph

622 Commits

Author SHA1 Message Date
Jeff Young 4aff5c7618 Keep courtyard caches alive during move.
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-25 17:20:11 +00:00
Alex 5e7c4b734c Small optimizations in DRC and SHAPE_POLY_SET. 2022-11-17 02:10:22 +05:00
Marek Roszko 3dd2ae762d Refactor step export to use our normal board processing routines 2022-11-12 21:27:10 -05:00
Tomasz Wlostowski 0a69340953 geometry: fix incorrect 45 degree miter generation (likely a side bug after introduction of EDA_ANGLE) 2022-10-31 11:49:31 +01:00
Tomasz Wlostowski cd29dcf6e0 libs/kimath: SHAPE::Format() can now produce C++ object construction and simple test dump of shapes 2022-10-31 11:17:31 +01:00
Seth Hillbrand 8e97855557 Fix Clipper2 handling of Inflate/Deflate
For unknown reasons, Clipper2 only returns Paths structures from the
ClipperOffset::Execute routine.  Further, the Paths are not properly
ordered (outline->hole in outline, outline2->hole in outline2).
To get proper hierarchy, we need to run an additional pass of the
solution with the paths as Subject in a null union.  This is effectively
a Simplify() call but we keep the data in Clipper format to reduce the
churn/calc time
2022-10-28 17:01:36 -07:00
Seth Hillbrand 546e16a002 Add multi-level fallback in tesselation
Some clipper cases do not get resolved with the `FAST` mode, so in those
cases, do a second pass in the `SIMPLE` mode.  If both fail, return a
broken polygon instead of an infinite loop

Fixes https://gitlab.com/kicad/code/kicad/issues/12761
2022-10-28 10:17:58 -07:00
Seth Hillbrand 4cdf0bd6c9 Clipper2: Handle nested poly/hole/poly returns
In Clipper1, we had a flat tree structure on returns.  Clipper2 nests
these, so we need to properly handle the nesting structure when
importing the polygons
2022-10-21 16:14:34 -07:00
Jeff Young d16b23d16e Name shortening and line-break reduction. 2022-10-21 18:41:39 +01:00
Seth Hillbrand 27add591ec Add Clipper2
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper.  The changes should be
mostly transparent.

Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.

Additionally, the inflation options are slightly different.  We cannot
choose the fallback miter.  The fallback miter is always square.  This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.

Lastly, we currently utilize the 64-bit integer coordinates for
calculations.  This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system.  This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
Jeff Young e5de56b6cc Fix edge case in arc collision.
SHAPE_ARC::IntersectLine() fails when one of the arcs start points
is on the center point of the other -- in this case we can't extend
the line to the arc intersection because one point does not define
a line....

Fixes https://gitlab.com/kicad/code/kicad/issues/12609
2022-10-09 23:05:15 +01:00
Jeff Young e866dfe137 Avoid trying to draw empty pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
2022-10-09 20:28:54 +01:00
Jeff Young 19d270fe74 Text size sanity checking for TEXT_ITEMS_GRID.
Oh dear, there was a bunch going on here.  Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places).  But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.

Fixes https://gitlab.com/kicad/code/kicad/issues/12577
2022-10-06 13:19:08 +01:00
Tomasz Wlostowski 26b2fd36d4 libs/kimath: fix divide by 0 for 0-length segments 2022-10-05 22:40:47 +02:00
Alex 6e0d940b98 kiplatform: Add quotes to restart registration command line. 2022-10-05 20:30:46 +03:00
Tomasz Wlostowski f80b48e1b0 libs/kimath: consider signed distances in parallelity check 2022-10-05 14:38:05 +02:00
Tomasz Wlostowski 6ed3618ce5 libs/kimath: improve numerical robustness of ApproxParallel/ApproxCollinear for segments of largely different lengths 2022-10-04 20:55:08 +02:00
jean-pierre charras ca5d87e46d disable CONIN$ and CONOUT$ redirection on mingw. it creates issues
(nothing printed on the console)
It is probably not needed on mingw/msys.
2022-10-04 19:51:52 +02:00
Mark Roszko fb8a4c10f7 Shove kicad2step into pcbnew itself with a new cli 2022-10-04 01:53:37 +00:00
Marek Roszko 2b42163379 Bind stdout and stderr for windows so that the console can get output 2022-09-29 18:51:01 -04:00
Jonathan Haas 9d45b5a197 Change implementation of Box2::FarthestPointTo to actually return the farthest point. 2022-09-27 22:40:55 +00:00
Alex 796e44d1e6 Fix a mistake in BOX2::Inflate. 2022-09-25 08:33:52 +03:00
Alex 58b03b0a1c Small optimizations. 2022-09-22 17:22:04 +00:00
Jeff Young 7e97dc6974 Fix typo found by dsa-t. 2022-09-20 10:50:22 +01:00
Marek Roszko 3d5913c825 Remove convert_to_biu.h, merge contents to base_units.h 2022-09-16 21:09:28 -04:00
Jeff Young 281b9d405a ADDED ability to specify where pad number (& net name) go on custom shaped pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
Jeff Young fc74de81fb Don't crash on empty SHAPE_LINE_CHAINs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12407
2022-09-13 13:28:00 +01:00
Jeff Young 9188838e50 RIP EDA_RECT. 2022-08-31 23:57:24 +01:00
Jeff Young b4492e0bd2 More EDA_RECE yeetage. 2022-08-31 17:19:50 +01:00
Jeff Young f17a865593 Move EDA_ITEM hitTest to BOX2I. 2022-08-31 17:18:45 +01:00
Jeff Young c7036ae076 Beef up BOX2's API so it can replace EDA_RECT. 2022-08-31 00:44:33 +01:00
Seth Hillbrand b736460e71 Move optional access from value() to *operator
`value()` throws.  Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
Seth Hillbrand df8b7a8fef Fix RemoveNullSegments 2022-08-29 17:08:01 -07:00
Seth Hillbrand a7f978daf6 Fix typo 2022-08-26 16:58:21 -07:00
Seth Hillbrand 5a37211fdb Handle cases where Simplify removes all outlines
This could theoretically happen for a fully degenerate polygon

Fixes https://gitlab.com/kicad/code/kicad/issues/12120
2022-08-26 16:41:57 -07:00
Seth Hillbrand 146495672e Utilize our combine_hash routine for multiple hash
We should be using the one routine every time we want to build a hash
from indepedent values rather than rebuilding it differently in multiple
places
2022-08-26 08:45:13 -07:00
Seth Hillbrand 06786c34d7 Blacklist hashes for 2d integer elements
The hash table for integer hashes is extremely limited and places most
elements in the same buckets.  This leads to a linear search time for
structures built on this.

This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
Seth Hillbrand f1261e71d4 Replace boost::optional with std::optional 2022-08-25 15:50:47 -07:00
Marek Roszko f63a099fad Remove unused function to squash warning 2022-08-21 18:23:28 -04:00
Roberto Fernandez Bautista 1fa1b44d02 Fix SHAPE_LINE_CHAIN::Simplify() when there are only 3 points in the chain
We weren't updating m_shapes properly.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/11695
2022-08-19 20:49:49 +01:00
Jeff Young 96f01d33c8 Performance improvements.
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference

Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
Seth Hillbrand 3594a06475 Fix simplify routine
The change in c9c31fcbc2 missed a number of cases.  This reverts back to
the system as it existed before 2be352b9f9
but using the revised method of determining A-B-C distance and avoiding
resizing the arrays

(cherry picked from commit 675a5a6e7b)
2022-08-01 09:50:17 -07:00
Seth Hillbrand 2039a1bc8b Don't resize vectors in hot loops
Fixes a slowdown caused by erasing elements from the middle of a vector
during a hot loop in SHAPE_LINE_CHAIN::Simplify().  This gets called
quite a bit when loading boards and updating lines, so it needs to be as
fast as possible

Fixes https://gitlab.com/kicad/code/kicad/issues/12115

(cherry picked from commit c9c31fcbc2)
2022-07-31 12:48:52 -07:00
Seth Hillbrand f6d2164cb0 Fix crash in PNS walkaround
Placing via in walkaround mode and colliding with an arc triggered an
unneeded assertion.

Also fixes the bad assertion format that did not receive strings

(cherry picked from commit df9cf0a0c3)
2022-07-28 09:40:41 -07:00
jean-pierre charras 81d9524e03 Fix missing header. 2022-07-25 18:41:38 +02:00
jean-pierre charras 130723ebac VECTOR2D CalcArcCenter( VECTOR2D& aStart, VECTOR2D& aEnd, EDA_ANGLE& aAngle ):
fix broken calculation of arc center for arcs > 180 degrees.
Fixes #11708
https://gitlab.com/kicad/code/kicad/issues/11708
2022-07-25 18:23:52 +02:00
Jeff Young 032708860b Include both text shapes and border shapes in textbox.
Fixes https://gitlab.com/kicad/code/kicad/issues/11806
2022-07-25 16:10:08 +01:00
Seth Hillbrand 00f0d229bf Fix incorrect comment in previous commit 2022-07-21 15:52:54 -07:00
Seth Hillbrand 16e3d40552 ADDED: Display calculated clearance in status bar
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC.  This will allow users
to better examine their system while working.

Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
Jeff Young b727bfc16d Performance: avoid sqrt at all costs. 2022-07-16 18:42:32 +01:00
Alex c107abe247 math: Use intrinsic functions for 64-bit rescale on MSVC. 2022-07-16 17:37:50 +00:00
Seth Hillbrand eccbb374a0 Add debug message to VECTOR3 check 2022-07-16 17:28:40 +00:00
Marco Langer 1606bfc9f8 fixed a runtime divide by zero crash for integral type template instanciations and made the class trivial copyable to increase performance 2022-07-16 17:28:40 +00:00
Alex 27869b1a37 Don't recalculate constants at every call in isqrt. 2022-07-16 14:53:18 +00:00
Jeff Young 0953395c87 LIB_SHAPE slightly abuses SHAPE_POLY_SET by using it for line chains.
Fixes https://gitlab.com/kicad/code/kicad/issues/11956
2022-07-08 21:35:40 -06:00
Seth Hillbrand 6fef054c51 Handle basic rounding error in schematic import
The fractional part of Altium schematic units is an integer number of
1/10000 mil segments, which is 2.54 nm.  The internal unit of eeschema
is 10 nm, so each fractional unit in Altium is 0.254 base eeschema
units.  To be consistent with
cf33cfcad1
we round to the nearest 10nm for each element

Fixes https://gitlab.com/kicad/code/kicad/issues/11742
2022-07-07 11:13:11 -07:00
Seth Hillbrand a8c6488358 Remove warning 2022-06-24 13:55:05 -07:00
Seth Hillbrand a118f20464 Hide cursor while warping on Wayland
Based on https://gitlab.freedesktop.org/xorg/xserver/-/issues/734 we
hide the window cursor prior to warping, which allows XWayland to
reposition the cursor.  This is only performed when Wayland is detected;
all other configurations call the standard warp routine

Fixes https://gitlab.com/kicad/code/kicad/issues/9785
2022-06-24 09:56:43 -07:00
Jeff Young 82ebc247b8 More performance enhancements for DRC. 2022-06-18 19:47:11 +01:00
Tomasz Wlostowski 3aed13278d geometry: more robust colinearity test in SHAPE_LINE_CHAIN::Simplify()
We now test the midpoint (B) of the 3 consecutive polyline points (A, B, C), since (assuming the angle between AB and BC is > 90 degrees) AC is always longer than
AB or BC. This minimizes the distance computation rounding error (in the previous algorithm, taking the point C for colineraity test) if AB is short and BC is very long, the test would
often fail due to rouding error in projection/line distance computation
2022-06-03 23:28:41 +02:00
Tomasz Wlostowski e6ebc2b9b9 geometry: use dedicated 64-bit integer square root for distance computations
Guarantees 1 LSB error, while the C++ double type has 55 mantissa bits (meaning for sqrt(X) >~ 2^22.5) the error is not guaranteed.
2022-06-03 23:28:41 +02:00
jean-pierre charras 046045f9de CalcArcCenter(): fix broken calculation of the arc center.
This function is used in the graphic items properties dialog, and each
arc edition from this dialog breaks the arc center position
Fixes #11703
https://gitlab.com/kicad/code/kicad/issues/11703
2022-05-31 10:48:54 +02:00
Tomasz Wlostowski 42e53ee8e9 kimath: fix regression in BuildInitialTrace()/CalcArcCenter causing incorrect arcs in routed traces 2022-05-27 17:41:05 +02:00
Mike Williams 9d90699358 Shape Assertions: print the correct type names
It still asserts, but at least for the right reason.
2022-05-26 15:32:45 -04:00
Seth Hillbrand 2a9d7314ca Initialize area check
Ensure that the max_poly set is zero before using
2022-05-26 08:19:16 -07:00
Seth Hillbrand 7dd0c67afd Handle hand-drawn holes in unfracture
We can't know that all holes will be ccw when entering unfracture.
Instead, we set the largest polyline to be the outline and the others to
be the holes.

(cherry picked from commit 1fe956c069)
2022-05-25 13:21:04 -07:00
jean-pierre charras 9108404efe Gerbview: seriously speed up the calculation time to draw polygons on OpenGL.
Mainly CacheTriangulation() was creating triangles using partition mode.
But this mode is optimized for Pcbnew and Gerbview and different internal units.
Now CacheTriangulation() is used in no partition, much faster in GERBVIEW_PAINTER.
Fixes #11549
https://gitlab.com/kicad/code/kicad/issues/11549
2022-05-13 18:20:35 +02:00
Jeff Young 728777da7c While icons aren't often used in Mac menus, they *are* supported. 2022-04-24 14:39:00 +01:00
Marek Roszko c64ea07d0b Check HKCU before HKLM for registry policies 2022-04-12 21:42:20 -04:00
Marek Roszko 392ed5fecd Add policy to enable/disable pcm 2022-04-12 10:08:34 -04:00
Roberto Fernandez Bautista 4defc946ef Fix rounding errors in SHAPE_ARC::Collide + fix qa tests
Use CIRCLE::NearestPoint to ensure consistency
2022-04-11 13:46:36 +01:00
Marek Roszko b3c5054d6c Add initial system policy checking for turning off data collection 2022-04-09 14:05:28 -04:00
Jeff Young 007906cd16 Fix a degeneracy bug in arc collisions.
This also fixes a failure to use the correct effective width for
shapes (which might, for instance, inherit their widths from schematic
defaults, netclasses, etc.).

Fixes https://gitlab.com/kicad/code/kicad/issues/11358
2022-04-08 16:15:58 +01:00
Seth Hillbrand 0625e20fc0 Cleanup spacemouse plugin
Sets std:: convention and unifies the defined/non-defined interface
2022-04-01 15:14:41 -07:00
markus-bonk 1a9ef4bd0f Add support for using a SpaceMouse to pan & zoom in the schematic editor. 2022-03-31 19:03:41 +00:00
Wayne Stambaugh 7b2d9dfc0c Fix some Coverity uninitialized scalar variable issues. 2022-03-24 13:17:07 -04:00
Seth Hillbrand 363ea99157 Avoid duplicate points in trapezoid pads
Duplicate points can be either positive-facing or negative facing, so
test absolutes

Fixes https://gitlab.com/kicad/code/kicad/issues/11025

(cherry picked from commit 207820e112)
2022-03-22 13:30:45 -07:00
Jeff Young 65185f53a1 Rotate fp zones before comparing with library versions.
Also includes some performance fixes to not copy around triangulation
data when it's not needed.

Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
Marek Roszko 1890a1aa06 Don't use the ANSI version of SetDllDirectory 2022-03-12 21:40:47 -05:00
Marek Roszko d6c1f52b55 Plant the ability to verify code signing signatures when trying to load kifaces
Off by default and intended for use in released builds only
2022-03-12 21:40:47 -05:00
Marek Roszko 5ef6e97a9e Two very minor win32 calls to lock down dll/exe search paths from cwd 2022-03-12 12:57:15 -05:00
Marek Roszko d3ca857af7 Set SetErrorMode on Debug build 2022-03-11 20:51:01 -05:00
Jeff Young ae307e1b34 Parallelize DRC triangulation, keepout processing, and sliver checking.
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
jean-pierre charras 263faf2870 Fix compil issue (not defined items) on msys2 2022-03-11 09:35:38 +01:00
Marek Roszko afaff022d7 Set some error flags for win32 2022-03-10 20:17:01 -05:00
Seth Hillbrand e278e77314 Rework of a24cdcb3f0
Inflate with linked holes needs to account for fractured polygons,
otherwise inflating with positive value will create rounded divots where
overlapping fracture lines meet and inflating with negative value will
create spaces between fracture lines.

Calling Simplify before Inflate takes an inordinate amount of time as
the Clipper healing routine is rather slow.  Our own Unfracture is meant
to heal the results of our Fracture routine and works much more quickly.
After healing, we still call the Simplify routine

(cherry picked from commit 9ca35cbcee)
2022-03-10 09:15:50 -08:00
Seth Hillbrand e8d6d03247 Always return simplified polygons
Clipper can handle complex input polygons but we will sometimes struggle
dealing with outputs from the inflate routine that have degenerate or
overlapping points.  Calling Simplify after the inflate keeps our
polygons easier to handle

Fixes https://gitlab.com/kicad/code/kicad/issues/11036

(cherry picked from commit a24cdcb3f0)
2022-03-09 16:19:44 -08:00
Jeff Young e4b56ab7f1 Performance fixes for the board from hell.... 2022-03-08 23:54:34 +00:00
Roberto Fernandez Bautista d39127cac7 Don't convert arcs with infinite radius - treat them as a line instead 2022-03-07 21:28:43 +00:00
jean-pierre charras 3bee9d3c59 Fix typo 2022-03-07 08:03:48 +01:00
jean-pierre charras dbfdd3fb56 Fix some Coverity warnings. 2022-03-06 09:48:33 +01:00
Seth Hillbrand 1a7d4f30d9 Fix proper rounding when generating arcs
We should allow for KiROUND to find the proper end point of the mid/end
elements when generating an arc from center/start/angle form
2022-03-04 13:14:19 -08:00
Seth Hillbrand ed7222b1e7 Adds uncertainty propagation to center point calc
Since we use center points to move back and forth for angle and
adjustments, we want to ensure that our center point is stable.

Rounding using integers introduces a 0.5 int uncertainty in each
measurement.  These are combined together multiple times to calculate
the center point, which combines the uncertainty.  Propagating the
uncertainty to the final calculation allows us to assign a range of true
values and pick the value that is most likely the correct value.

Fixes https://gitlab.com/kicad/code/kicad/issues/10739
2022-03-04 11:37:49 -08:00
Seth Hillbrand 3c2eb9311f Minor optimization for collision checking
Prevents extra center point calculations
2022-03-04 11:37:49 -08:00
Tomasz Wlostowski 2746be30c1 geometry: constructor for SHAPE_RECT from a BOX2 2022-03-03 01:02:00 +01:00
Jeff Young b9a834e600 For Coverity. 2022-02-17 16:23:52 +00:00
Jeff Young c89bb8d0cf Formatting. 2022-02-17 16:23:52 +00:00
Jeff Young b1bd8421e0 Performance: remove associated triangle sets when removing outline.
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
Jeff Young d8c4f2cb09 Performance improvements for zone filler. 2022-02-15 19:19:02 +00:00
Jeff Young 5c9e718407 Performance enhancements for connectivity.
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
Jeff Young 98b9c6e2a1 Better progress reporting and a slight performance boost on commit. 2022-02-15 12:20:34 +00:00
Jeff Young 90f6edad61 Move connectivity algo to collision-based routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/1800

Fixes https://gitlab.com/kicad/code/kicad/issues/1769
2022-02-13 00:35:11 +00:00
dsa-t 68655540eb Clamp cursor to limits of coordinates representation
Also improves large distance handling.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8846
2022-02-11 16:42:52 +00:00
Mike Williams a5e8575091 Eeschema: Implement orthogonal dragging
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1956
2022-02-10 18:38:40 +00:00
Wayne Stambaugh e93b7b05ec Wide characterize libs and bitmap2component source.
(cherry picked from commit 54f91a0221)
2022-02-09 11:49:58 -05:00
Seth Hillbrand d0d472f39d Hide icon option when platforms disable
Mac and some Linux configs disable menu icons.  We shouldn't offer the
option when the system does not support this as it leads to confusion

Fixes https://gitlab.com/kicad/code/kicad/issues/10425
2022-02-07 10:28:07 -08:00
Seth Hillbrand 162545ddf0 Validate arc output when editing
Handles checking output of the arc to ensure we don't end up generating
an invalid arc.  Also keeps the limit of the arc angle to be (360,360)
excluding 0.

Fixes https://gitlab.com/kicad/code/kicad/issues/10070

(cherry picked from commit 8fc831cbc2)
2022-02-07 08:55:53 -08:00
Marek Roszko 41f54349a5 Replace inserts/push_backs with emplace in some spots 2022-02-05 19:53:31 -05:00
Jeff Young 3f8cada334 Fix some issues with new polygonization of arcs and arc collision test.
Test should not be testing against the polygonization error; if done
correctly that should all be on the correct side of the shape.  Use an
epsilon instead (I chose polygonization error / 10, but the value isn't
terribly important).

Fixes https://gitlab.com/kicad/code/kicad/issues/10724
2022-02-03 19:53:42 +00:00
Jeff Young 08ee2671cc A better arc-to-polygon algorithm when error is outside.
The existing algorithm nicely handled the error being on the inside (where
the segment ends are error-free), but not when it was on the outside (where
the segment midpoints are error-free).

In any case, we want error-free points at each end of the arc so we don't
get ears or divots.
2022-02-02 23:40:24 +00:00
Seth Hillbrand 82ceaf0d9b Try not to Simplify lines to a single point 2022-01-31 16:13:27 -08:00
Seth Hillbrand 88a58803ca Revert "Mark unbundled mac apps as unsupported"
This reverts commit 68a0b99835.

Reverted as unbundled Mac apps patch breaks kicad-mac-builder
2022-01-31 15:57:14 -08:00
Alex 4c4089e836 Allow overlay scrolling on GTK, except for GAL canvases.
This prevents glitches when both scrollbars
are visible and scrolling to the end.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/10559

Fixes https://gitlab.com/kicad/code/kicad/-/issues/9988
2022-01-31 18:45:47 +03:00
Seth Hillbrand 68a0b99835 Mark unbundled mac apps as unsupported
We do no track all the various possible issues arising from using
unbundled Mac apps.  Users may choose to use KiCad this way but issues
must be recreated on a supported configuration
2022-01-28 15:49:53 -08:00
jean-pierre charras 0bc5cb33ed Fix a few issues in plotting code. Fix bug in EDA_ANGLE::IsCardinal()
Fixes #10547
https://gitlab.com/kicad/code/kicad/issues/10547
2022-01-21 12:35:58 +01:00
Jeff Young c8a50d9b50 Remove unit-less angles from VECTOR2I/D APIs. 2022-01-20 23:58:20 +00:00
Jeff Young 14006495d5 Angle cleanup. 2022-01-20 22:35:41 +00:00
Jeff Young 4eac8d7c66 Remove unit-less angles from geometry lib APIs. 2022-01-20 21:10:04 +00:00
Jeff Young 854987f663 Remove unit-less angles from geometry manager APIs. 2022-01-20 21:10:04 +00:00
Jeff Young fbab335128 Retire DPOINT and DSIZE. 2022-01-20 21:10:04 +00:00
Jeff Young af20d46d06 Fix converting angles from tenths of a degree.
(Conversion was upside-down.)

Also fixes bugs with rotation angle increment not getting units
set and with a 0 footprint editor value overwriting a non-zero
pcb editor value (or vice versa).
2022-01-19 19:55:50 +00:00
Jeff Young 9298da4ebc ArcToSegmentCount calcs need to use abs value of angle. 2022-01-19 16:01:23 +00:00
Ola Rinta-Koski ef721f051a copyright note removed 2022-01-19 15:30:06 +02:00
Jeff Young 2a60017ffa Fix error in trigo.
Fixes https://gitlab.com/kicad/code/kicad/issues/10495
2022-01-19 00:10:32 +00:00
Seth Hillbrand 57afdf153d Remove unneeded distance calc
(cherry picked from commit 857683d372)
2022-01-18 15:59:16 -08:00
Jeff Young 4e493e2cbc Clean up some more deci-degrees. 2022-01-18 14:08:47 +00:00
Jeff Young f310a5b986 Excise deci-degrees from trigo. 2022-01-18 11:44:55 +00:00
Jeff Young 92dae4646e Yeet dec-degrees from covert_basic_shapes_to_polygon. 2022-01-18 10:14:52 +00:00
Jeff Young b828355206 A bit more angle cleanup. 2022-01-18 09:48:24 +00:00
Jeff Young e37ca2f757 Remove dead code. 2022-01-18 01:40:03 +00:00
Jeff Young 8c246a761d Move EDA_ANGLE from int to double. 2022-01-17 20:57:54 +00:00
Jeff Young e61144d45a Finish with EDA_ANGLE. 2022-01-16 21:15:40 +00:00
Jeff Young e84c574830 Some more EDA_ANGLE cleanup. 2022-01-16 19:16:18 +00:00
Jeff Young 9b661aea10 EDA_ANGLE for plotters.
Also fixes a compile error in the PNS Playground.
2022-01-16 01:19:45 +00:00
Jeff Young 1539fa5af2 Move SHAPE_ARC to EDA_ANGLE. 2022-01-16 01:19:45 +00:00
Jeff Young f3fa7febeb Fix a degrees / tenths-of-a-degree mismatch. 2022-01-15 11:16:19 +00:00
Jeff Young 3f98769a77 More EDA_ANGLE.
Includes bug fix for catastrophic error in Add() for converting to
radians.

Includes bug fixes for the fact that the pcbnew test can't seem to
find the ANGLE_* objects (getting all 0's instead).
2022-01-15 01:30:04 +00:00
Seth Hillbrand 22a77d3556 Move EDA_ANGLE to KiMath lib
KiMath should only depend on itself not on other elements in the tree
2022-01-14 17:12:24 -08:00
Jeff Young 07013d00e1 More EDA_ANGLE. 2022-01-14 16:08:19 +00:00
Jeff Young abd3f5bc2b Move footprints to EDA_ANGLE. 2022-01-14 16:08:18 +00:00
Marek Roszko fcfe42d67c Continue the war on wxPoint 2022-01-10 19:52:26 -05:00
Jeff Young 27c967421c Commenting and "auto" reduction. 2022-01-08 16:47:45 +00:00
Jeff Young eb58d7e44c Text glyph caches and bug fixes.
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
2022-01-08 16:47:45 +00:00
Marek Roszko 6d2fd17a39 Remove a wxPoint dependence in trigo 2022-01-04 23:23:36 -05:00
Marek Roszko d7e790b6c1 Remove wx/gdicmn.h from trigo.h 2022-01-04 21:26:04 -05:00
Marek Roszko 726d873c53 Tear down the wxPoint trigo helpers 2022-01-04 21:23:11 -05:00
Marek Roszko e4dbfcd92d Swap out some wxSize for VECTOR2I 2022-01-04 20:42:27 -05:00
Marek Roszko 98ee6c5f85 Cleanup some wx/gdicmn.h includes 2022-01-04 20:32:27 -05:00
Marek Roszko ac715d2e51 Scoop up some more wxPoint instances 2022-01-03 20:00:53 -05:00
Simon Richter d25fe17b28 Bump minimum required CMake version to 3.11
Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
2022-01-01 21:35:08 -05:00