a10f2b284c
Unify negative zero and percent handling in UNIT_BINDER.
...
Some values, such as solder mask margins, are usually negative and it
helps to display zero as "-0.0".
2021-08-06 18:16:38 +01:00
e81b7b4a14
Give a few dialogs a bit of love.
...
1) improve spacing in copper zone properties.
2) improve spacing and naming in dielectric material properties.
3) clearer naming in board setup > constraints.
4) remove over-exuberant stretching in board setup > mask & paste.
2021-08-06 18:16:38 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
77680eba30
Naming conventions.
2021-08-05 14:31:36 +01:00
5bf0b99813
Capture errant mouse-up from locked dialog in move tool.
...
Don't pass it on to other tools where it causes all kinds of mayhem.
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-08-04 17:42:40 +01:00
76bdb423d7
Minor changes: minor code cleanup and fix minor Coverity warning
2021-08-04 16:47:41 +02:00
ae99e627bd
Quiet Coverity.
2021-08-04 13:55:42 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
65f6e72b4c
Improve commenting.
2021-08-04 13:55:42 +01:00
ac933d4e83
Fp editor: avoid having nil uuids when editing old footprints.
...
In Fpeditor, nil uuid has a special meaning and cannot be used as uuid in fp items.
Fixes #8914
https://gitlab.com/kicad/code/kicad/issues/8914
2021-08-04 12:37:52 +02:00
c5e195bdff
Cleanup (includes and formatting).
2021-08-03 18:37:23 +01:00
95b87ba29a
Freshen microwave polygon dialog and remove a bunch of dead code.
2021-08-03 01:11:11 +01:00
43523df843
Measure distance from pad center, not pad hull.
...
Otherwise we think the wrong end of really short track segments is
connected to the pad, leaving the other end dangling.
Fixes https://gitlab.com/kicad/code/kicad/issues/8909
2021-08-02 22:42:54 +01:00
8b9161b27d
Be more careful with alpha value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8850
2021-08-02 18:24:16 +01:00
6f1837b300
Formatting.
2021-08-02 01:52:58 +01:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
0d539a84a2
Fix bugs in Tracks Cleaner.
...
1) Implement more robust connection checking so we don't decide very
short segments with both endpoints within a single track are connected
at both ends.
2) Make use of the IS_DELETED flag to perform iteration during dryRun
so that all deletions to be made are flagged.
Fixes https://gitlab.com/kicad/code/kicad/issues/8883
2021-08-01 15:50:01 +01:00
b573712326
Cleanup.
2021-08-01 15:37:12 +01:00
0f5a8f87d3
Add writing of pad primitive polys with arcs, and fix a bug in reading.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8827
2021-08-01 10:47:00 +01:00
faa1ff4ec6
Add false-negative DRC tests (and fix first bug found by them).
2021-07-31 16:41:44 +01:00
7b4dcb6e10
Refactor ExportSpecctraFile to be usable in API
...
Currently there is pcbnew.ExportSpecctraDSN() but it needs a pcbnew
frame set which makes it unusable outside of the scripting window or a
plugin.
This refactors actual exporting logic into separate helper and adds an
overload to ExportSpecctraDSN(board, filename) that doesn't need pcbnew
window.
2021-07-31 09:55:48 +00:00
6cd4d68d57
Add drop shadows to MacOS icons
...
Apple UI guidelines ask for small drop shadows on the icons. We add
these using ImageMagick when resizing
2021-07-30 20:55:34 -07:00
e7d8b1a975
Resize MacOS icons and script their creation
...
Creates a script that will fomat the MacOS icons at 80% of the total
size in line with Apple's guidelines.
Script requires Inkscape 1.0 and png2icns (available on Linux boxen)
Fixes https://gitlab.com/kicad/code/kicad/issues/7977
2021-07-30 20:28:14 -07:00
ad8acd328c
Expunge some remaining references to kicad-pcb
2021-07-30 20:27:45 -07:00
bceb3794f8
Remove ZONE_FILLER_TOOL since it's not really necessary.
...
It was causing intermittent failures on GTK. We'll no doubt want
tools in the QA framework at some point, but probably not necessary
for 6.0....
2021-07-31 01:50:42 +01:00
8c69a856fc
Add zone filler tests.
...
One test has pads of a bunch of different shapes and provokes some
errors to make sure they're caught.
The others are all past issues with the zone filler to make sure we
don't suffer any regressions. (They should all just pass with no DRC
errors.)
2021-07-30 17:09:24 +01:00
8aea2cbd03
When ignoring click events don't ignore synthetic ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-07-29 18:07:04 +01:00
138a965c2a
Remove shadowing member variable.
...
Perhaps the compiler always gets this right, but it's still confusing
when reading the code.
2021-07-29 16:03:25 +01:00
9271ac1a4f
Don't allow deletion of pads when not in allow-free-pads mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8884
2021-07-29 16:03:25 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
befd30a1a1
Switch the board footprint properties window to use the new 3d models panel
...
This allows it to also get the badge showing errors in the panel.
2021-07-28 20:56:17 +01:00
1a4a3400ba
Split the footprint 3d model panel into its own class
...
This allows it to be shared by both the PCB editor properties dialog
and the fpeditor dialog.
2021-07-28 20:56:17 +01:00
f233f4a0a9
Expunge EDA_FILE_SELECTOR.
...
EDA_FILE_SELECTOR was just an obfuscation of wxFileSelector().
2021-07-28 14:12:51 -04:00
b6e1fe11b6
Fix a collision name (perhaps msys2 specific)
2021-07-28 19:39:50 +02:00
36d66085f5
Add a column showing 3D model file loading errors
...
This adds an icon to the left of the row with an error symbol if the
file can't be found or opened, and shows a tooltip over the icon with
and error string.
Fixes https://gitlab.com/kicad/code/kicad/issues/3815
2021-07-28 16:42:22 +01:00
c0f12cf8b0
PCB painter: skip early to polygon algo in outline mode
2021-07-28 10:37:56 +00:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
1f2e7a94ca
Change Move Exactly hotkey to Shift + M to avoid OSX minimize.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8864
2021-07-27 18:20:32 +01:00
dd5676f4bc
Implement a safer (RAII) tool re-entrancy guard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8873
2021-07-27 16:37:34 +01:00
886dc2f43e
Do-not-show-again section for common prefs & zone fill warning infobar.
...
Note that the dialogs which have mutliple options were not moved over
as it seems perahps not the right choice to have them save state between
sessions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
c74148fa88
Add infobar for those who confuse zone filling with display modes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
c946070005
Fix TRACKs not being cast correctly in API
2021-07-26 22:37:22 +00:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
e62969d007
Move zone fracture display mode to AdvancedCfg, and add triangulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
89b1fdabe9
Pass COLOR4D object by reference instead of on the stack.
2021-07-26 13:28:56 -04:00
cb917e4c42
Avoid nonsensical intersections
...
When two segments are approximately parallel, we shouldn't look to find
their intersection. It will never be the nearest point and it overflows
the KiROUND call
Fixes https://gitlab.com/kicad/code/kicad/issues/8858
2021-07-26 09:02:54 -07:00
d613292b67
Fix type in group command enablement.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8821
2021-07-25 13:31:52 +01:00
39e938db3e
Save the show-page-limits setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8825
2021-07-25 13:29:16 +01:00
42086a455d
fix blind via early return in VRML exporter
2021-07-25 12:22:55 +00:00
373f0335c8
Convert Altium radial dimensions to leaders.
...
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
2021-07-24 14:25:59 +01:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
dd31a5383b
Added the double click to footprint editor
2021-07-24 08:53:09 +00:00
31d2b2df8b
QA test: fix a wx assert about Locale when running qa_python tests.
...
Probably happens only when the system locale uses a comma as fp separator.
2021-07-23 11:45:45 +02:00
04b9b15255
Fix copy/paste error.
2021-07-23 01:11:22 +01:00
8d1dd1f8b0
Handle pad->custom conversion more closely
...
When converting pads to custom polygons, avoid padding with the polygon
width and keep the anchor pad within the boundary of the original pad
itself
Fixes https://gitlab.com/kicad/code/kicad/issues/8842
2021-07-22 12:12:42 -07:00
a16b85db67
Read/write group locked state. Show locked state in dialog & statusbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8796
2021-07-22 12:49:30 +01:00
49e1b5785f
PCB_SHAPE::GetFocusPosition(): returns a point on the outline instead of center.
...
This function is used in DRC to locate a graphic shape. For not filled shapes,
this point must be on the shape outline, not on the center of the shape (the center
shows nothing)
Fixes #8832
https://gitlab.com/kicad/code/kicad/issues/8832
2021-07-22 10:41:50 +02:00
1a301d8eea
Stop using wxDialog::EndModal() from inside dialogs.
...
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
2021-07-21 17:38:14 -04:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
af90d47edc
Altium: Fix calculating third arc point from uninitialized memory
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8671
2021-07-20 19:13:32 +00:00
234b414e2c
Fix misplaced break after code cleanup.
2021-07-20 17:05:00 +02:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
75190370dd
Convert -> Create from Selection
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8818
2021-07-19 18:45:33 -04:00
6a886e7085
Wizard qrcode_footprint_wizard.py: fix a minor issue and update code.
2021-07-19 18:36:58 +02:00
8bacc9fccb
Fix python 'testing for equality' syntax
...
'Testing whether an object is 'None' using the == operator is inefficient and potentially incorrect.'
Per https://lgtm.com/projects/g/KiCad/kicad-source-mirror/?mode=tree&ruleFocus=7900090
2021-07-19 15:42:30 +00:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
9cb4c9bfc2
3D viewer: ensure the activity messages are displayed on Linux after Frame creation.
2021-07-19 10:10:25 +02:00
a43ca978df
3D viewer: do not build the board 3D data during 3D frame creation, but after.
...
Building the 3D data is time consuming, so creating the data after the 3D
frame is shown is better, and the build activity is visible, especially on Linux.
2021-07-18 17:55:40 +02:00
56412cc843
PCB_TEXT: remove "hide" option, because they are never hidden.
...
- avoid write "hide" option in file
- always return true when calling IsVisible()
Fixes #8806
https://gitlab.com/kicad/code/kicad/issues/8806
2021-07-18 14:58:21 +02:00
1a5e63bcab
PANEL_SETUP_BOARD_STACKUP: fix a incorrect behavior when changing layer count,
...
and add a button to adjust dielectric thickness (regression fix)
Fixes #8800
https://gitlab.com/kicad/code/kicad/issues/8800
2021-07-16 20:39:00 +02:00
c794a6ce7a
Add pdb install option for msvc
2021-07-14 23:42:45 -04:00
e61b1f03b8
PNS: Discard duplicate tracks in FixRoute
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8737
2021-07-13 21:13:40 -04:00
ff2e470a6e
Remove virtual items from clearance calculations
...
Extends 3ea970f8c9https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 16:10:36 -07:00
3ea970f8c9
Don't add virtual items to the display
...
By definition virtual vias should only exist in the backend, not
affecting users
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 15:52:41 -07:00
2f41dd4074
Fix unit var warning
2021-07-13 09:53:31 -07:00
f0513978ff
Back-port some fixes from 7.0 branch.
2021-07-13 17:24:23 +01:00
8b3ccab0a3
Implement explicit polygon construction for most pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8650
2021-07-13 14:51:58 +00:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
8d65663566
Copper Zone Properties dialog modifications
...
* Changed the net sorting mechanism make it similar to the 'Net Inspector' window
* Replaced the 'Show All Nets' check box with 'Hide auto-generated nets' check box
* Replace the warning label with wxInfoBar
* Removed unused controls and renamed controls where applicable
* Re-arranged the Copper Zone Properties dialog layout to improve user experience
* Minor code refactoring of DIALOG_COPPER_ZONE class
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8547
2021-07-12 21:55:46 +00:00
2889861c0b
Remove unused variables.
2021-07-11 23:42:40 +01:00
e953cb6a27
Add default severities for new DRC violations.
2021-07-11 23:33:17 +01:00
54b6f51633
DSN export: export RECT and ARC shapes (on silkscreen layer) from footprints
...
Also export arc track segments as lines. (Freerouter does not support QARCs)
Fixes #8769
https://gitlab.com/kicad/code/kicad/issues/8769
2021-07-11 18:15:40 +02:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
e02bb80bf3
Handle cancel when selecting copper layer.
...
Also changes the algorithm to ask only once, rather than one per
non-copper-layer object.
Fixes https://gitlab.com/kicad/code/kicad/issues/8767
2021-07-10 12:05:25 +01:00
625006ca30
Remove front/back SMD pad color now that we have opacity sliders.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8761
2021-07-10 10:13:55 +01:00
a06b95bb1f
Even out spacing around various panels.
2021-07-09 23:42:45 +01:00
11cd8738a3
Put wxSearchCtrl back by eliminating the excess focus events that in Windows land cause a "select all"
...
The setfocus calls were really because of the overtly aggressive mouse handler for the canvas that has been patched out.
2021-07-09 18:08:32 -04:00
046fb58183
Better command names and tooltips for zone fill/unfill commands.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-09 22:13:50 +01:00
387cd36f60
Fix GenCAD Export flipped footprints
...
GenCAD Exporter flips the board footprints before exporting. The
exporter assumes that the flip happens T/B and not L/R.
Fixes KSC Issue #356
2021-07-09 09:44:30 -07:00
c5571afbd9
Teach GenCAD exporter to handle chamfered rect pads
...
Chamfered rect pads can also have rounded corners, so we handle these
using a polygon transform before exporting
2021-07-09 09:44:30 -07:00
6c3ba1c20b
Coverity issue fixes.
...
Issues #332032 , #332086 , #332157 , and #332171 .
2021-07-09 10:56:35 -04:00
473f10ab1f
Tooltips for Board Setup > Constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8764
2021-07-09 13:06:59 +01:00
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
00f1b609c4
PNS: Don't run fanout cleanup when manually forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8724
2021-07-08 19:56:42 -04:00
e895af4ec6
Include arcs in create array. (Thanks to RigoLigoRLC.)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6491
2021-07-08 18:28:21 +01:00
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
49e6b80fc5
Rollback searchctrl change for FOOTPRINT_VIEWER_FRAME
...
Fixes #8751
2021-07-08 07:26:42 -04:00
a15a91dc00
Turn Footprint Text on when user turn on Value or Ref
...
In the appearance panel the old implementation doesn't turn the meta-
control "Footprint Text" back on when you switch on "Footprint Value/
Reference" while "Footprint Text" is switched off. This is neither
logically correct nor making the elements rendered correctly (value/ref
swicthes would affects corresponding bottom texts, but doesn't affect the
meta-control).
I didn't find a corresponding GitLab issue around, so I'm not saying
"fixes" here.
2021-07-08 03:05:51 +00:00
cafd42911e
Do not use opacity for zone outlines
...
The opacity is intended to aid seeing through
zone filled areas and applying it to outlines
makes them hard to see and select.
2021-07-07 22:04:11 -04:00
edc2be9018
Update width status when user choice changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-07 21:26:21 -04:00
66eb2ddeb5
Remove auto when not needed for line length.
2021-07-07 20:05:50 +01:00
4207165c26
Fix PNS deleting too many segments
...
Don't exit the loop pre-emptively. Need to update lastLink.
2021-07-07 19:54:19 +01:00
cda26bd57b
SHAPE_LINE_CHAIN::NextShape instead of explicitly calculating indices
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8738
2021-07-07 19:46:47 +01:00
7a1e8520ae
Specctra export: Fix incorrect export of holes from mirrored footprints.
...
If a footprint is containing a closed shape on Edges.Cuts it is exported as Hole
(keepout zone). For flipped footprints the hole was incorrect.
Fixes #8753
https://gitlab.com/kicad/code/kicad/issues/8753
2021-07-07 16:40:19 +02:00
17ab2c7197
.kicad_pcb files: minor enhancements: add missing new lines in file.
...
No actual change, this is only a cosmetic change.
2021-07-07 11:44:11 +02:00
9d348d7e6d
Coverity issue fixes.
2021-07-06 13:32:34 -04:00
cd476e1728
Gerber plotter: ensure filled areas using thick outlines have a closed outline.
...
Fixes #8735
https://gitlab.com/kicad/code/kicad/issues/8735
2021-07-06 13:59:05 +02:00
1a23502e98
PAD::TransformShapeWithClearanceToPolygon(): better polygonal shapes:
...
- Oval and round pads ensure at least 16 segments per CIRCLE (like other shapes)
- For ERROR_OUTSIDE option, ensure the aarc approx error is the actual error,
not max allowed error.
These changes can be seen only for a large max allowed approx error, especially
when filling zones.
2021-07-06 10:50:46 +02:00
81fa40d659
Code style: Fix missing space
2021-07-05 20:39:42 +01:00
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
ce8132bf4f
Arc Track Drag & Fillet Tracks: Copy lock status to new track(s)
2021-07-05 20:29:25 +01:00
b6e8beb38c
FP_TEXT: account for parent rotation when creating clearance shape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8728
2021-07-05 13:49:40 -04:00
ea6769b702
The REPORTER interface is inherently line-based.
...
Also fixes a bunch of error messages that were similar but not
identical (which just increases translation burden).
Fixes https://gitlab.com/kicad/code/kicad/issues/8723
2021-07-05 13:41:06 +01:00
a92d337905
Use wxSearchCtrl in the footprint viewer/picker.
2021-07-04 22:06:01 -04:00
67762a11f6
Don't double-process arcs if we get one first
2021-07-04 12:22:52 -04:00
b291f36dae
ADDED: Convert tool can create polygons with arcs from contiguous line and arc segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5409
2021-07-04 12:10:59 -04:00
576d70fab0
Fix file format syntax of arcs in polygons
...
No format bump as there is no way to create these files yet.
2021-07-04 12:10:59 -04:00
0116e9c94e
Silence Altium polygon-needs-at-least-3-verticies warning.
...
Too many Altium files appear to have these. Just ignore them instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/8183
2021-07-04 11:02:59 +01:00
e0146f73b9
PNS: Pick up complete lines between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7614
2021-07-03 20:00:54 -04:00
91ea4a0569
PNS: Pick up segments directly between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7601
2021-07-03 19:50:04 -04:00
ab38dfd7ae
Fix build
2021-07-03 19:47:58 -04:00
77b68a827c
Remove unused variable
2021-07-03 19:20:54 -04:00
a5308e5f5c
Fix python console toggle to work across pcbnew/eeschema
2021-07-03 22:48:46 +00:00
126cd14715
Fix width setting bug in Net Inspector.
2021-07-03 21:16:15 +01:00
6a0a38ec29
Prevent wxWidgets assertion.
2021-07-03 21:16:15 +01:00
37fac6de35
Use ChangeValue() instead of SetValue() to keep from firing events.
...
Otherwise setting a filter also turns off the Show All Nets checkbox.
Also make sure that config values get saved when they're changed.
2021-07-03 21:16:15 +01:00
4b07a55ef8
Fix net name to net code map to handle sorting and filtering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8714
2021-07-03 21:16:15 +01:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
252bf76452
Fix off-by-one in AssembleTuningPath
2021-07-03 14:37:52 -04:00
3c59e452d6
PNS: Set tuned path correctly in skew tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8708
2021-07-03 14:06:30 -04:00
1b9893841b
Add a tooltip explaining the track width dropdown
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8719
2021-07-03 13:36:18 -04:00
277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
bc65b7173f
Don't use SCH version number when inspecting PCB files.
2021-07-03 15:24:54 +01:00
3f6811f413
Minor dialog layout improvements.
2021-07-02 11:36:06 -04:00
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
c23e39dbe7
Avoid adding invalid text to temporary fp
...
Adding values/references to footprint text is an assertion. This avoids
the assert when copying a full footprint by skipping the extra text
2021-07-01 11:57:29 -07:00
24e54178db
Make sure pin hittest regions don't get too hard to hit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8616
2021-07-01 15:43:19 +01:00
78d2e88f4b
Beautify export STEP dialog.
2021-07-01 15:43:19 +01:00
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
e9c0920be2
Use a standard SHAPE_POLY_SET hittest for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8705
2021-06-30 22:36:29 +01:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
b1b4caee6a
Escape "naughty" characters in symbol names.
...
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-06-30 13:12:57 +01:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
0d8f0d361e
Allow aligning pads in FP editor when locked
...
Locking is not a concept in the footprint editor. The signature for
checking is slightly different in the alignment tool, so we need to move
the check higher to allow aligning items in fpeditor
2021-06-29 16:48:31 -07:00
c6e4dcbecf
Pcbnew: fix incorrect geographical annotation dialog message.
2021-06-29 17:11:37 -04:00
e4c108ee3a
Pcbnew: minor geographical annotation dialog user message improvements.
...
Remove schematic from the completion message as it can no longer be
updated though the dialog.
Add a warning to synchronize the schematic with the annotation changes.
2021-06-29 15:17:00 -04:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
0c2ac9a711
Move GUI font code to common.
...
This also allows the Mac fixes for font facenames to be more
compartmentalized.
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 18:27:58 +01:00
64f07ea9c6
Update text variables after changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8697
2021-06-29 13:55:06 +01:00
1db33c7b3a
More safety (and better impl) for not sharing FP table/info stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 12:46:16 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
d296bec5b8
Differentiate aSingleLine mode for SCINTILLA_TRICKS
...
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
2021-06-28 11:20:12 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
08fb05e522
Make sure HPGL and DXF drill map generators honour origin setting.
...
ADDED: also adds origin setting to Footprint Position File dialog
and generators.
Fixes https://gitlab.com/kicad/code/kicad/issues/8669
2021-06-27 17:40:20 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
70ac70f360
Don't attempt to round-trip netnames through wxListBox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8684
2021-06-27 12:02:21 +01:00
1fcd7992a0
Performance improvement for adding/removing dielectric layers.
...
(Roughly a 10X speedup on Mac.)
2021-06-27 09:43:20 +01:00
b924c85f80
Start recording the precision of dxf imports
2021-06-27 00:38:19 -04:00
0f27618125
Use a list dialog that can be parented by the Board Setup dialog.
...
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-06-27 01:41:35 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
4c5df22eb0
Don't show busy cursor when dialogs (including progress) are in use.
...
Also removes a stale comment.
Also moves the progress reporters earlier to lessen need for busy cursor.
Also cleans up some error strings and makes other more easily translatable.
2021-06-26 22:53:24 +01:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
95ec9c786c
Board setup spacing.
2021-06-26 10:55:31 +01:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
9f51f7b055
Formatting and include cleanup.
2021-06-25 17:48:15 +01:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1f4a56005e
Remove extraneous isPrinting test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8609
2021-06-25 12:44:51 +01:00
4eafd2664a
FootprintWizardBase.py: fix use of cmp(), non existing in python3
...
Fixes #8677
https://gitlab.com/kicad/code/kicad/issues/8677
2021-06-25 09:04:49 +02:00
27804e40e2
Go back to using space-width for tabs (instead of max-char-width).
...
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
2021-06-24 23:53:27 +01:00
232ffe97be
Diff pair gap only overrides netclass clearance when it's smaller.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8676
2021-06-24 16:56:53 +01:00
744dadd412
Naming conventions and formatting.
2021-06-24 16:56:53 +01:00
a89f6404b4
Fix logic bug found by Coverity.
2021-06-24 12:18:22 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
95ab53d119
pcbnew: fix missing layer names and missing layers in stackup table
2021-06-24 08:52:51 +00:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
27e9750507
Pcbnew: fix footprint selection bug.
...
Do not remove footprint objects from list of selected objects when there
are no drawable objects other than the reference and value text.
Increase the minimum size rectangle for footprints from 0.025mm to 1mm
when the footprint has no drawing objects so that it is easier to select
the footprint in this case.
Add some pretty colors to the footprint bounding box and hull outline
so that it's possible to tell the difference between selection areas.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8379
2021-06-23 19:46:33 -04:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
ae612a454e
Make blind via rendering more intuitive by putting top on top...
...
bottom on bottom, and the via colour larger.
2021-06-22 18:24:46 +01:00
7efca0113d
Reset m_inDrawingTool on exit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8653
2021-06-22 13:02:45 +01:00
a31b667e2a
Plotter: better shape for CHAMFERED_RECT and ROUNDRECT pads with margin.
...
The shape of the pad+clearance area is not similar to the shape drawn on screen
2021-06-21 18:55:33 +02:00
9fb77473cd
pcb_painter.cpp: fix incorrect shape of CHAMFERED_RECT pads with negative clearance.
...
Negative clearance (for instance on mask or paste layer) was not taken in account
2021-06-21 18:52:57 +02:00
00b4134eb8
pcb_painter.cpp: fix incorrect shape of ROUNDRECT pads with negative clearance.
...
If a negative clearance (for instance on mask or paste layer) is set to more
than the corner radius, the drawn shape was broken (fully incorrect size)
2021-06-21 13:44:30 +02:00
685ee31c35
Workaround a few more OSX printf problems.
...
Also regularizes the frame title processing.
Also fixes a type where the library name wasn't processed for
variable expansion.
Fixes https://gitlab.com/kicad/code/kicad/issues/7742
2021-06-20 22:48:19 +01:00
de4eb1fcef
Convert to zone: take dest layer from editor active layer
...
Show non-copper zone properties if active layer is non-copper
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8646
2021-06-20 15:13:18 -04:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
89718dd3ba
Naming conventions.
2021-06-19 19:36:53 +01:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
d26449cc29
Formatting.
2021-06-19 11:37:20 +01:00
f8e9542004
Fix crash when opening board setup after zone filler exits
2021-06-18 12:23:12 -04:00
3072422538
Allow caller to specify which library table to add library to.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8013
2021-06-18 11:39:18 +01:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
16047b7419
3D preferences bug fixes.
...
1) Make sure prefs get saved when closing parent frame.
2) Add camera projection mode to settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/8110
Fixes https://gitlab.com/kicad/code/kicad/issues/8626
2021-06-17 12:22:18 +01:00
1722bc03b0
Consistent terminology and punctuation.
2021-06-17 00:05:17 +01:00
cbd9208d73
Fix missing translation
2021-06-16 12:48:47 -07:00
7953a5c62b
Work around MacOS printf/format issues
...
MacOS wxWidgets implementation of wxPrintf/Format suffers from some
issues when mixing string types. We avoid this by manually formatting
the string ourselves.
Fixes https://gitlab.com/kicad/code/kicad/issues/8404
2021-06-16 11:54:55 -07:00
c8444913df
Implement lock between zone filler and drc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
db19ae226a
PANEL_PCBNEW_ACTION_PLUGINS: fix not working "open plugins folder" on Linux
2021-06-16 08:15:20 +02:00
8f9800f760
Fix pad shape for certain legacy circular pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8615
2021-06-15 22:25:55 -04:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
5b8f32acd2
Python script sample: fix compatibility with recent changes in code.
2021-06-15 18:19:58 +02:00
142dd48c99
SCRIPTING_TOOL::showPluginFolder(): fix wxWidgets3.14 compatibility (Linux mainly)
2021-06-15 18:19:58 +02:00
3616a8f0ee
Use polygon coordinates relative to the board.
...
Footprint polygon coordinates are relative to the footprint.
Translate to the board coordinates when doing hittest with
a (selection) rect.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8596
2021-06-15 15:04:11 +00:00
38f18d0505
Fixed according to KiCad Style Guide.
2021-06-15 14:59:04 +00:00
aed0352828
pcbnew: Replace CR inserted on macOS instead of LF when CTRL+Enter is pressed.
2021-06-15 14:59:04 +00:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
fbbe723811
Fix board_item.i after recent changes in Pcbnew code.
...
(some class names changed)
2021-06-15 10:59:52 +02:00
5d9ff0b9b7
Step export dialog: save 2 options in config file.
...
2 options (overwrite file and replace 3d shapes) were not saved previously.
2021-06-15 09:33:37 +02:00
fb46cd8bc5
Expunge the use of the word component from Eeschema code.
...
The only exception to this is the SPICE simulator's use of component
when referring to physical component (R, L, C, etc.) values.
2021-06-14 14:00:21 -04:00
30f3d11355
fix possible incompatibilities of python scripts due to recent code cleaning
2021-06-14 18:57:05 +02:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
0527dc6fe0
Fp editor: fix initialization of default courtyard line thickness.
...
When no config file found it was initialized to DEFAULT_SILK_LINE_WIDTH,
although it was initialized to DEFAULT_COURTYARD_WIDTH in board editor.
Fixes #8344
https://gitlab.com/kicad/code/kicad/issues/8344
2021-06-14 08:31:55 +02:00
82f3df4086
Attempt to fix Python qa code after renames
2021-06-13 11:20:19 -04:00
5bb6b1a3cc
Minor cleanup.
2021-06-12 11:39:28 +01:00
3644224cb6
Build smoothed area at outline
...
The clearance to board edge will be set by the knockout routine.
Clipping twice can leave small imperfections in the edge that need to
get triangulated
2021-06-11 14:26:38 -07:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
44086ff2b2
Pull 3D preferences into KiCad preferences architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5187
2021-06-11 11:19:40 +01:00
5492fafdf4
Pcbnew: allows access Layers context menu when right clicking from below layers list
...
Fixes #6614
https://gitlab.com/kicad/code/kicad/issues/6614
2021-06-11 09:32:47 +02:00
d8b1e827c7
Check all previous merge events
...
Typo only continued merge loop when last element was successfully
merged, leaving tracks where multiple segments were colinear
Fixes https://gitlab.com/kicad/code/kicad/issues/5020
2021-06-10 16:59:35 -07:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
1c3df973d6
Coverity warnings fixes.
2021-06-10 13:45:02 +02:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
410dbe17de
Fix inital predefined track width selection in track properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8578
2021-06-09 09:59:25 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
c650d47626
Add warning message on non-unity scaling
...
When exporting STEP model, warn the user if one of their footprints has
a non-unity scaled model as this compromises the integrity of the STEP
export.
Fixes https://gitlab.com/kicad/code/kicad/issues/1781
2021-06-08 16:38:47 -07:00
b891b5e1e2
Do not blindly substitute model names
...
Makes model substitution (VRML->STEP in STEP Export) optional. This can
prevent nasty surprises where the user doesn't see/can't affect the
outcome
Also, when substituting models, do not maintain scale factor. So a VRML
model with non-unity scaling will not be export as a STEP file (of the
same name) with non-unity scaling. This is the first step to address
https://gitlab.com/kicad/code/kicad/-/issues/1781
2021-06-08 16:38:47 -07:00
Jeff Young
Roberto Fernandez Bautista
jean-pierre charras
qu1ck
Seth Hillbrand
Ian McInerney
Wayne Stambaugh
david-beinder
Anton Lazarev
Pradeepa Senanayake
Jon Evans
luz paz
Marek Roszko
RigoLigoRLC
Thomas Pointhuber
Fabien Corona
Eeli Kaikkonen
Michal Schulz
Mikolaj Wielgus
luz paz