* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
* Fix offset errors when scale factor greater is than one.
* Changed behavior of fit in page when not drawing border and
title block to fit board outline in page.
* Fix offset errors when mirroring (still not 100% correct on MSW with
wxWidgets 2.9.4).
* Lots of the usual code cleaning and simplifying.
Eeschema (also Libedit and Libview) starts always to the default grid (50 mils)
Gerbview starts with the last selected grid, but the validity is tested.
In Pcbnew the grid value is always displayed, so it should always be good.
Should allow Pcbnew code easier to change and Gerbview code more understandable and easier to maintain.
Code cleaning (remove dead code, add comments).
Minor other enhancements.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
the GetPosition() and SetPosition() changes. It also starts towards making m_Orientation
and m_Thickness fields private with accessors, but does not complete this latter goal.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Fixed bug on Windows that prevented the menu short cuts from working
properly.
* Fix duplicate menu short cut keys in KiCad, Pcbnew, and Eeschema.
* Add menu short cuts for all possible menu entries.
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Move various locate functions into the appropriate board item object.
* Unified best zoom for all frames derived from PCB_BASE_FRAME.
* Remove track.cpp as it is no longer needed.
* Dead code removal.
* Remove scary frame window pointer member from board item objects.
* Add draw bounding box to gerber draw item for debugging purposes.
Remove or move old .ico and .pgn files and add new icons (.ico files and .png files) in bitmaps_png/icons and bitmaps_xpm/icons
.png files and .ico are used to build desktop shortcuts
Handle variable size bitmaps in kicad.
* Changed <wx-2.8/xml/xml.h> to "xnode.h" in pcbnew_config.cpp to fix bug
when building against wxWidgets 2.9 and above.
* Convert broken wxXmlNode code to use XNODE.
* Overloaded XNODE constructor for creating child nodes.
* Translate French naming conventions.
* Translate French comments.
* Remove tabs from several source files.
* Coding style policy and Doxygen comment fixes.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Remove most (not all) variables that were initialized but never used that
cause GCC 4.6 to generate a warning.
* Fix bug in schematic library editor best zoom calculation.
In Render, colors shown were the default colors, not the selected colors, when starting Pcbnew or Gerbview,
because colors were not updated after reading the config.
* Move undo item copy global variable into schematic editor frame object
member variable.
* Add helper methods for accessing the undo item copy member variable.
* Fix undetected bug when changing a text type.
* Added an exchange command to the undo/redo base class for handling undoing
a changed item type which cannot be undone by swapping out the variables.
* Revert change to common/hotkeys_basic.cpp that broke hot key behavior.
* Lots of coding policy changes while making the changes above.
(WxWidgets 2.9.1 seems call setlocale( LC_NUMERIC, "" ) when wxConfig read doubles stored in config, but forget to back to current locale.)
Note: perhaps there are some dialogs that need this call to SetLocaleTo_Default() ).
* Minor code cleanup in pcbnew/netlist.cpp
jean-pierre charras
Wayne Stambaugh
Emmeran
Dick Hollenbeck
marco.
Lorenzo Marcantonio
Vladimir Ur
Hauptmech
Fabrizio
Jerry Jacobs
Marco Serantoni
Jerry Jacobs