f84836f51e
router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class
2021-02-25 17:18:23 +01:00
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
cd162a8f58
Honour m_placingVia when avoiding collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
2020-12-20 20:36:19 +00:00
46314f6483
Only compare collision-corrected routes when looking for shortest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
2020-12-19 23:20:27 +00:00
0ef63aca47
Don't reset tail when changing track width/via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-11 17:58:36 +00:00
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
288ab7ed6f
Minor formatting cleanup.
2020-12-01 14:04:01 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
fd4b9f0efa
PNS: ratlines need to not be debug graphics
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
2020-10-13 20:04:47 -04:00
7a5c99ee0f
Tweak the mouse-based posture solver
...
Add an epsilon to reduce flutter
Add a lock after a certain distance
Forget the old trail when unlocking
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5381
2020-08-30 19:54:09 -04:00
adff7f749b
PNS: Addition layer smarts
...
Edge.Cuts have no parent but cross all layers, so we need to handle the
"all layers" case. Also renames "IsPadOnLayer" to "IsOnLayer".
Fixes https://gitlab.com/kicad/code/kicad/issues/5351
2020-08-25 09:42:50 -07:00
9a66a5acad
Cleanup code line endings
2020-08-10 03:27:27 +00:00
f00c59c446
Fix a few Coverity warnings.
2020-07-29 09:26:57 +02:00
2a2e389a94
router: auto-guess track posture from mouse movements, experimental!
2020-07-22 18:05:50 +02:00
fd07e94760
router: abstract segment links into a LINK_HOLDER interface. DIFF_PAIRS are now also linkable
2020-07-22 17:04:42 +02:00
0417a6b409
PNS: Fix missing via on zero-length
...
The current node needs to be kept for zero-length lines when placing a
via.
Fixes https://gitlab.com/kicad/code/kicad/issues/4005
2020-03-05 15:02:40 -08:00
d4cbc348de
PNS: avoid committing route with nothing
...
The node is not neccesarily populated when committing, so we need to
check for validity first.
Fixes #3984 | https://gitlab.com/kicad/code/kicad/issues/3984
2020-03-03 14:02:32 -08:00
d6706c257c
PNS: clear via when fixing route
...
When fixing the route, we need to clear the via to avoid re-placing it
on each future click.
Fixes #3966 | https://gitlab.com/kicad/code/kicad/issues/3966
2020-03-02 16:22:34 -08:00
386147628e
PNS: Initialize placement test
2020-03-02 16:22:34 -08:00
18db471967
PNS: Line placer returns false when nothing committed
...
The true/false return should be triggered on whether any elements have
been commited to the line
Fixes #3969 | https://gitlab.com/kicad/code/kicad/issues/3969
2020-03-02 11:11:13 -08:00
6850067182
router: commit traces made in single stroke/click (fixes regression introduced with Backspace support)
2020-02-29 20:40:19 +01:00
4525a17076
router: backspace key to undo last fixed segment(s)
2020-02-27 22:02:56 +01:00
d1a5d8c78b
router: don't forget the tail when toggling via placement
2020-02-27 22:02:56 +01:00
37a754c4dd
router: initial attempt at improved 'aim at mouse cursor' strategy in walkaround mode, wip...
2020-02-27 22:02:56 +01:00
8c19b4b6ae
pcbnew: Adding arcs to PNS
...
This is allows ARCs in tracks to be synchronized with
the PNS router. Note this does not yet include the UI components
to route curved traces
2020-02-21 16:11:41 -08:00
f7cb970a02
PNS: Modify MarkObstacles logic to select shorter
...
When routing where we hit multiple obstacles, we choose the shortest
path to allow overlapping hits to choose the shorter path, thus giving a
better chance of returning true for the DRC-compliant path.
Fixes #3773 | https://gitlab.com/kicad/code/kicad/issues/3773
2020-01-16 19:57:38 -08:00
eb3d32f967
SHAPE_LINE_CHAIN: Unify constructors
...
Keeps the multi element SHAPE_LINE_CHAIN constructors in a single
routine using std::vector and implicit construction.
2019-12-12 13:54:48 +00:00
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
c6f5df134c
Minor speed cleanup
...
This adjusts iterators to use const reference when only used for
copy. It also ensures pre-allocation of vectors when size is known
ahead of time.
2019-12-05 14:20:59 -08:00
Tomasz Wlostowski
Jon Evans
Jeff Young
Seth Hillbrand
jean-pierre charras