Commit Graph

31473 Commits

Author SHA1 Message Date
Jeff Young be2e0cc272 A right-to-left single-char sel followed by typing leaves cursor the same.
Fixes https://gitlab.com/kicad/code/kicad/issues/11349

(cherry picked from commit dead84e7a1)
2022-04-09 21:23:54 +01:00
Jeff Young 48a776f7c5 Repair code that was supposed to be after LoadSymbol().
(Even the comment said so.)

Fixes https://gitlab.com/kicad/code/kicad/issues/11199

(cherry picked from commit ed361925ba)
2022-04-09 21:23:18 +01:00
Jeff Young 43929781a2 On-the-fly translations for pin electrical types.
Also add on-the-fly translation for editor title bars.

Fixes https://gitlab.com/kicad/code/kicad/issues/11324

(cherry picked from commit 68ca385e07)
2022-04-09 21:22:50 +01:00
Seth Hillbrand e02229a234 Don't flag pin missing driver when there is an NC
The NC flag indicates user intention to override the lack of connection
to input pins
2022-04-07 09:29:02 -07:00
Seth Hillbrand 821fe6ea42 Don't set the dirty bit when running DRC
Dirty bit is set in the zone filler separately, there is no action in
the DRC that needs to be saved

Fixes https://gitlab.com/kicad/code/kicad/issues/11344
2022-04-06 17:03:01 -07:00
Seth Hillbrand e740db61f5 Show non-driven error on single-pin nets
Better to have both the single-pin error message and the non-driven
error message when an input pin is not connected than miss error
messages when the pin is connected to a blank net

Fixes https://gitlab.com/kicad/code/kicad/issues/10430
2022-04-06 16:53:23 -07:00
Marek Roszko a700531aba Forcefully ignore PYTHONPATH env variable on Windows
Fix https://gitlab.com/kicad/code/kicad/-/issues/11328


(cherry picked from commit 44296dfea2)
2022-04-05 02:11:32 +00:00
Wayne Stambaugh 7d9cf00fd9 Improve sheet schematic import messages and simplify code.
There was also a logic bug when the selected schematic was in a different
path than the current project and was already part of the current project.
The symbol library table reconciliation code was still run which was wrong.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/11075

(cherry picked from commit e336a0e403)
2022-04-04 17:19:40 -04:00
jean-pierre charras 6127ae92a5 PLOTTER: do not clamp coordinates to an arbitrary value.
Previously, coordinates were clamped to +- 60 inches. It makes no sense to
clamp them at plotter level: max cooed depends on the editor (schematic/board...)
Rename MAX_PAGE_SIZE_MILS to MAX_PAGE_SIZE_EESCHEMA_MILS and use it only for Eeschema.
Fixes #11196
https://gitlab.com/kicad/code/kicad/issues/11196

(cherry picked from commit 21144481d2)
2022-04-04 13:52:21 -07:00
Jeff Young f8c92e355b Plating thickness appears on both sides of hole wall. 2022-04-04 21:51:30 +01:00
Jeff Young f7f6ea54fe Fix incorrect m_SyncPinEdit setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/11331

(cherry picked from commit 3f9cfc0ac1)
2022-04-04 21:51:30 +01:00
dsa-t fdfe5a813e Clamp cursor to limits of coordinates representation
Also improves large distance handling.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8846

(cherry picked from commit 68655540eb)
2022-04-04 13:38:50 -07:00
aris-kimi 636d009860 Added footprint rule area anchors
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10461

(cherry picked from commit 47c0672ff3)
2022-04-04 13:38:00 -07:00
Seth Hillbrand 7d96d5940d UNDEFINED_LAYER is always flashed
This is already true for vias and should be true for pads as well

Fixes https://gitlab.com/kicad/code/kicad/issues/11335
2022-04-04 12:25:55 -07:00
Wayne Stambaugh d3a60f7d83 Fix broken symbol field table editor dialog.
Do not use the symbol field string to populate the value and footprint
grid cells.  The field strings may be empty because the symbol has not
been instantiated yet by entering a sheet.  This fix makes an incorrect
assumption that the first instance value and footprint data in the symbol
is the same for all instances.

Note: this fix is incomplete because the value and footprint fields are
      can now be different between sheet instances.  The entire field
      table editor design will need to be rethought because the current
      grouping doesn't allow different value and footprint instance
      changes.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/11194

(cherry picked from commit b87fc45e33)
2022-04-04 14:32:07 -04:00
jean-pierre charras 604871518f Export VRML: fix some (minor) issues, from Master branch. 2022-04-04 14:46:55 +02:00
jean-pierre charras 5a68077f60 VRML exporter: make export faster by using SHAPE_POLY_SET::PM_FAST. 2022-04-04 12:28:54 +02:00
Jeff Young 8054f1a948 Apply a more sophisticated test for ignoring isInCoupledDiffPair.
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself.  Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions.  However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.

This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.

See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6

Fixes https://gitlab.com/kicad/code/kicad/issues/11314

(cherry picked from commit f7cdc7af75)
2022-04-03 18:23:41 +01:00
Jeff Young 80bf1048d0 Look for sheet pins inside sheets.
Fixes https://gitlab.com/kicad/code/kicad/issues/11297

(cherry picked from commit 6b99a937d8)
2022-04-03 18:22:15 +01:00
Jeff Young d85e52e9fd A better is-modified test.
Fixes https://gitlab.com/kicad/code/kicad/issues/10791

(cherry picked from commit 09ba7468ae)
2022-04-03 18:21:41 +01:00
Jeff Young e21f0ec9fb Honour prime-event-location when starting router.
Fixes https://gitlab.com/kicad/code/kicad/issues/11239

(cherry picked from commit a54bbfe12b)
2022-04-03 18:21:00 +01:00
Jeff Young 1adfca8f2d Don't re-fetch selection when running select-in-same-sheet.
Fixes https://gitlab.com/kicad/code/kicad/issues/11110

(cherry picked from commit a35ae8cdce)
2022-04-03 18:20:32 +01:00
Jeff Young f89256e51e Implement align-to-grid for sheets.
Fixes https://gitlab.com/kicad/code/kicad/issues/11201

(cherry picked from commit 8dc680adbb)
2022-04-03 18:14:23 +01:00
Jeff Young e98e9f72df Only write Allow DRC Violations if enabled.
Fixes https://gitlab.com/kicad/code/kicad/issues/11177

(cherry picked from commit b78a260326)
2022-04-03 18:13:04 +01:00
Jeff Young f8ff9705ff Fix issues with importing NPTH pads from CircuitStudio.
Fixes https://gitlab.com/kicad/code/kicad/issues/10493

(cherry picked from commit 118a37f19f)
2022-04-03 15:51:33 +01:00
Jeff Young e3e52d055a Don't rely on HasConversion() for Symbol Properties in Symbol Editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/11200

(cherry picked from commit 2681ad6cfc)
2022-04-03 15:51:33 +01:00
Jeff Young 6de8b99cf2 Don't default to Annotate All just because the selection is empty.
Fixes https://gitlab.com/kicad/code/kicad/issues/11181

(cherry picked from commit 6fa8cab188)
2022-04-03 15:51:33 +01:00
Jeff Young c9829cf9a8 Enable bb and/or uvias when encountering them on Altium import.
Fixes https://gitlab.com/kicad/code/kicad/issues/10044

(cherry picked from commit 1d66925f5f)
2022-04-03 15:51:33 +01:00
Jeff Young 0fc4ccf8d9 Clean up pad handling in 3D viewer.
Most importantly, create F_Cu/B_Cu layers if they're otherwise empty
but we have plated pads to render on them.

Fixes https://gitlab.com/kicad/code/kicad/issues/10207

(cherry picked from commit 0dc857b5ab)
2022-04-03 15:51:33 +01:00
Jeff Young 330b1fd733 Don't leave dangling pointers to old document when importing.
This goes for both selection pointers and undo/redo pointers.

Fixes https://gitlab.com/kicad/code/kicad/issues/10145

(cherry picked from commit 535ecb9b7b)
2022-04-03 09:49:37 +01:00
Marek Roszko 455ec428f2 Free memory in dxf import sooner on bad_alloc
(cherry picked from commit b18e441a88)
2022-04-02 13:58:35 +00:00
jean-pierre charras 39959844e5 SYMBOL_EDITOR_CONTROL::DuplicateSymbol(): fix incorrect validation test.
DuplicateSymbol() is called both to duplicate and paste. Only duplicate
needs a test to know if a symbol is selected.
Fixes #11053
https://gitlab.com/kicad/code/kicad/issues/11053
2022-04-02 08:20:27 +02:00
Marek Roszko d5de4bb5c7 Catch memory exhaustion trying to import large DXFs
See https://gitlab.com/kicad/code/kicad/-/issues/11308


(cherry picked from commit 9f8c0a8185)
2022-04-02 03:15:33 +00:00
Seth Hillbrand 6706a5c462 Skip zero-size elements when converting
Also fixes an assertion when converting to polygon from the board editor

Fixes https://gitlab.com/kicad/code/kicad/issues/11313
2022-04-01 13:22:08 -07:00
Seth Hillbrand 15fe2f2fd0 Allow common greek letters in passive regex
Adds common letters (µ and Ω) as prefix and unit

Fixes https://gitlab.com/kicad/code/kicad/issues/11289
2022-04-01 12:51:21 -07:00
Seth Hillbrand c23679d9bd Consistently handle env/prj variables
User-defined variables cannot be used for internally-reserved variables

Fixes https://gitlab.com/kicad/code/kicad/issues/11232
2022-03-31 17:05:25 -07:00
jean-pierre charras f226772938 Cvpcb: fix "not found" .equ files.
Fixes #11264
https://gitlab.com/kicad/code/kicad/issues/11264
2022-03-29 18:54:11 +02:00
Seth Hillbrand 6a53e318e5 Thread the connectivity vector updates
Now that we are dealing with individual connection elements that do not
update their connected elements as well, we can thread the update, just
being careful to guard any remaining updates (bus_enty/busLine) that
need reciprocal updating

Fixes https://gitlab.com/kicad/code/kicad/issues/10974
2022-03-28 15:35:52 -07:00
Seth Hillbrand 776a28a10e Avoid generating SCH_CONNECTION if not needed
If the SCH_ITEM has already been processed, the extra time needed to
iterated over the memberset and get the SCH_CONNECTION when we won't use
it is not neccesary.

Fixes https://gitlab.com/kicad/code/kicad/issues/10974
2022-03-28 15:07:18 -07:00
Seth Hillbrand 3a98eacdb9 Handle connection vector inline
Normally, you will gain by resursing a nested loop only over the
pairs that are not already handled.  In this case, however, you lose
time because you step outside of the cache by adding the reciprocal test
at each step.

Instead, we process one element at a time, keeping it cached and loop
over all other elements to add to the connection.  This saves us about
75% of the time for larger loops (e.g. stacked power pins on a large
BGA)

Fixes https://gitlab.com/kicad/code/kicad/issues/10974
2022-03-28 15:07:18 -07:00
Seth Hillbrand a8004cb161 Update Translations 2022-03-28 11:14:40 -07:00
Henrik Kauhanen f00222b3a6
Translated using Weblate (Swedish)
Currently translated at 99.6% (7186 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/sv/
2022-03-28 19:50:37 +02:00
Mark Hämmerling 96dded48d4
Translated using Weblate (German)
Currently translated at 100.0% (7210 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/de/
2022-03-28 19:50:37 +02:00
Allan Nordhøy 950cccdc1c
Translated using Weblate (Norwegian Bokmål)
Currently translated at 73.4% (5295 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/nb_NO/
2022-03-28 19:50:37 +02:00
Mark Hämmerling 5b7a1a8177
Translated using Weblate (German)
Currently translated at 100.0% (7210 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/de/
2022-03-28 19:50:37 +02:00
taotieren 96aa472ff9
Translated using Weblate (Chinese (Traditional))
Currently translated at 100.0% (7210 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/zh_Hant/
2022-03-28 19:50:37 +02:00
Henrik Kauhanen 0ec50e9096
Translated using Weblate (Swedish)
Currently translated at 99.4% (7173 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/sv/
2022-03-28 19:50:37 +02:00
Henrik Kauhanen 6bc48e9ca8
Translated using Weblate (Swedish)
Currently translated at 99.4% (7173 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/sv/
2022-03-28 19:50:36 +02:00
Arnau Llovet Vidal 5505add08e
Translated using Weblate (Catalan)
Currently translated at 65.7% (4740 of 7210 strings)

Translation: KiCad EDA/v6
Translate-URL: https://hosted.weblate.org/projects/kicad/v6/ca/
2022-03-28 19:50:36 +02:00
Marek Roszko 4d8297a1f6 Try and ducktape boost api change for seeder
idk what im doing


(cherry picked from commit d440ff7c37)
2022-03-28 01:48:50 +00:00