2d9b06cbf9
Fix missing flatten step when filling zones with arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8923
2021-08-08 15:09:12 -04:00
1edb96cc5b
Fix SHAPE_LINE_CHAIN::Slice(), splitting arcs when required
2021-08-08 19:09:54 +01:00
fb3a6ef2db
Add qa Test for SHAPE_LINE_CHAIN::Slice
2021-08-08 19:09:54 +01:00
54942a1401
Fix typos that would result in fp zone setting written into pads.
2021-08-08 18:12:29 +01:00
e38c366695
Narrow zone dialog a bit.
2021-08-08 18:12:29 +01:00
8172737d6f
Updated Italian translation
2021-08-07 20:11:53 +00:00
fa82fcb809
Router tool: ensure a internal layer exists when placing a microvia.
...
Fix also a minor compil warning.
Fixes #8931
https://gitlab.com/kicad/code/kicad/issues/8931
2021-08-07 20:29:49 +02:00
1332208ab1
Update test expectation.
2021-08-06 22:24:33 +01:00
6eb59b9d9e
Dialog naming conventions.
2021-08-06 20:54:26 +01:00
bafa105ed0
Enforce hole clearance on NPTHs in zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8924
2021-08-06 18:16:38 +01:00
a10f2b284c
Unify negative zero and percent handling in UNIT_BINDER.
...
Some values, such as solder mask margins, are usually negative and it
helps to display zero as "-0.0".
2021-08-06 18:16:38 +01:00
e81b7b4a14
Give a few dialogs a bit of love.
...
1) improve spacing in copper zone properties.
2) improve spacing and naming in dielectric material properties.
3) clearer naming in board setup > constraints.
4) remove over-exuberant stretching in board setup > mask & paste.
2021-08-06 18:16:38 +01:00
5f84071cfa
Gerber plotter, GERBER_PLOTTER::plotArc( SHAPE_ARC& aArc ): fix missing G75 command
2021-08-06 17:45:57 +02:00
b1c67d9ad4
Cvpcb: fix possible crash when pressing the ESC key during some calculations, round 2.
...
It happened when firing a Close Event during calculations modifying widgets
inside the main frame.
The close event is now vetoed during these critical calculations.
2021-08-06 13:40:30 +02:00
89f124595c
Revert "Cvpcb: fix possible crash when pressing the ESC key during some calculations."
...
This reverts commit 99b242069d
2021-08-06 13:33:14 +02:00
99b242069d
Cvpcb: fix possible crash when pressing the ESC key during some calculations.
...
It was due to calls to wxSafeYield() than can fire a Close Event during calculations
modifying widgets inside the main frame.
Fixes #8920
https://gitlab.com/kicad/code/kicad/issues/8920
2021-08-06 11:15:32 +02:00
3747cb50c9
wxCHECK_MSG instead of assert
2021-08-05 17:45:12 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
eaf8eb284a
Add true arc-to-polyline collisions
2021-08-05 17:45:12 +01:00
dd65ce9523
Simplify & move new arc collision code into Kimath library
...
Don't need to check intersections with the circle, just fix the
calculated "projected" point from the end points.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8234
2021-08-05 17:45:12 +01:00
b6be10f05c
Fix CIRCLE::Intersect( const SEG& aSeg ) and add unit tests
2021-08-05 17:45:12 +01:00
9c15ba9673
qa: arc playground with fixed endpoint corner case
2021-08-05 17:45:12 +01:00
2573ac19a5
Fix "false intersection" case and attempt to fix "missing intersection"
2021-08-05 17:45:12 +01:00
318435aedb
Add more test cases: simulate zone fill around arc + diff pair meander
2021-08-05 17:45:11 +01:00
f2925dc6cb
Added a few more test cases
2021-08-05 17:45:11 +01:00
9922e85ecf
arc collision playground: some cleanup
2021-08-05 17:45:11 +01:00
7e94f85870
arc collision playground
2021-08-05 17:45:11 +01:00
539154466d
playground with arc2arc collision
2021-08-05 17:45:11 +01:00
b6664eecf2
arc: fix incorrect arc center calculation for angle < 0 or > 180 deg
2021-08-05 18:15:55 +02:00
77680eba30
Naming conventions.
2021-08-05 14:31:36 +01:00
5bf0b99813
Capture errant mouse-up from locked dialog in move tool.
...
Don't pass it on to other tools where it causes all kinds of mayhem.
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-08-04 17:42:40 +01:00
d6443d5a2c
Reduce type-casting a bit.
2021-08-04 17:11:35 +01:00
76bdb423d7
Minor changes: minor code cleanup and fix minor Coverity warning
2021-08-04 16:47:41 +02:00
ae99e627bd
Quiet Coverity.
2021-08-04 13:55:42 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
65f6e72b4c
Improve commenting.
2021-08-04 13:55:42 +01:00
48e0f68c7e
Improve ease-of-use of color preferences.
2021-08-04 13:55:42 +01:00
ac933d4e83
Fp editor: avoid having nil uuids when editing old footprints.
...
In Fpeditor, nil uuid has a special meaning and cannot be used as uuid in fp items.
Fixes #8914
https://gitlab.com/kicad/code/kicad/issues/8914
2021-08-04 12:37:52 +02:00
c5e195bdff
Cleanup (includes and formatting).
2021-08-03 18:37:23 +01:00
813d8f0957
Fix broken QA build on Linux.
2021-08-03 12:02:42 -04:00
c00f4ed5d2
Add regression tests for track cleaner.
2021-08-03 16:17:18 +01:00
95b87ba29a
Freshen microwave polygon dialog and remove a bunch of dead code.
2021-08-03 01:11:11 +01:00
43523df843
Measure distance from pad center, not pad hull.
...
Otherwise we think the wrong end of really short track segments is
connected to the pad, leaving the other end dangling.
Fixes https://gitlab.com/kicad/code/kicad/issues/8909
2021-08-02 22:42:54 +01:00
8b9161b27d
Be more careful with alpha value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8850
2021-08-02 18:24:16 +01:00
c34f45f646
Split global label size expansion from TextOffset setting
...
Global label expansion ratio default is now 37.5%
Wire text offset default is now 15%
2021-08-02 16:40:36 +00:00
bab13debcb
Improve overbar rendering in PCB and global labels
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8584
Moves the font slightly down in global labels
Keeps font with overbar at the same size in PCB OpenGL renderer
2021-08-02 16:40:36 +00:00
78fd268b18
Retire PARAM_OBSOLETE in favour of a schema migration.
2021-08-02 17:38:15 +01:00
7d501e8a43
Add PARAM_OBSOLETE to clean out old JSON structures.
...
While not technically necessary, the old structures can be confusing
to users looking at the files.
Fixes https://gitlab.com/kicad/code/kicad/issues/8856
2021-08-02 12:53:57 +01:00
4943d2f0a3
More consistent formatting.
2021-08-02 12:53:57 +01:00
210671b10a
Gerbview, Excellon reader: add preference to configure default coordinates format. In Excellon drill files, the coordinate format is not specified, and sometimes units and zero option are even not specified, so some drill files cannot be read. In Preferences, default setting options are now added to specify by hand missing info.
2021-08-02 12:55:41 +02:00
Jon Evans
Roberto Fernandez Bautista
Jeff Young
Marco Ciampa
jean-pierre charras
Tomasz Wlostowski
Wayne Stambaugh
david-beinder