This removes unused static function in page layout editor, unused
variable in pcb_painter and restors the gcc unitialized fix for
pcbnew's drawing_tool.
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
Set the IS_NEW flags so the POINT_EDITOR doesn't try an poke its head
in, and apply the EE_SELECTION_TOOL hack for mouse clicks leaking
through to the underlying tools.
Fixes: lp:1832911
* https://bugs.launchpad.net/kicad/+bug/1832911
Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
Mouse capture end is called by some actions such as save board. This
resets the cursor image but doesn't change the current tool. Resetting
the cursor image during action prevents this.
(cherry picked from commit 35e87128f5)
Fixes: lp:1831888
* https://bugs.launchpad.net/kicad/+bug/1831888
When using "Place Text" the crosshair was freezing if cancelled before
placing text.
After the crosshair freezes, the next uses of the "Place Text" or
"Add Dimension" caused the crosshair to jump to the screen location
where the previously the crosshair was frozen.
Cancelling the "Add Dimension" caused the crosshair to jump to the
screen location where the crosshair was when cancelled on the next use
of the "Place Text" or "Add Dimension".
Fixes: lp:1822578
* https://bugs.launchpad.net/kicad/+bug/1822578
Rather than selecting an arbitrary track to snap, we select the closest
track to our point, allowing the via to be placed along the full track
length.
Fixes: lp:1813324
* https://bugs.launchpad.net/kicad/+bug/1813324
Prior to placing the via, we check if the resulting via will pass too
close to different nets on different layers.
Fixes: lp:1718827
* https://bugs.launchpad.net/kicad/+bug/1718827
When creating the zone cutout, we delete the old zone and add a new one
with each cutout. This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.
Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
Graphic lines and polygons are drawn to fit specific areas for which it
is helpful to have the endpoint controlled by the cursor even when
constraining the angle.
Fixes: lp:1805502
* https://bugs.launchpad.net/kicad/+bug/1805502
* Do not compile dxf old files.
* import gfx, gal mode: make absolute placement working.
* Import gfx in legacy canvas: use it and make interactive placement working
* Take imported line width in account. Ensure DXF line thickness is OK.
* handling empty files in legacy mode.
When we draw a path, we usually want to close the path when clicking on
the end of another line. This uses grid helper to ensure this
progression happens as expected.
Refactor the polygon event loop into its parent function to allow access
to the params structure. Active layer now updates the drawing layer for
add/cutout zones.
Fixes: lp:1797483
* https://bugs.launchpad.net/kicad/+bug/1797483
Get the board settings when changing the drawing layer. These include
default line thickness that should be updated.
Fixes: lp:1796489
* https://bugs.launchpad.net/kicad/+bug/1796489
When drawing the crosshair should track the element while the mouse
provides the position to calculate the next snap.
Fixes: lp:1796524
* https://bugs.launchpad.net/kicad/+bug/1796524
When drawing segments, the segment will be NULL'd after committing, at
which point we lost our snap layer. Choosing snap layers from the
current drawing layer is a more robust method.
Fixes: lp:1796467
* https://bugs.launchpad.net/kicad/+bug/1796467
Since we are handling snapping in the grid helper, we don't need to
enable it in the cursor position return. This allows the grid helper to
use the frame position while optionally snapping to segments.
This ensures that when starting to draw a zone or graphic element, the
preview is drawn in the same color/on the same layer as the element that
will be created. Previously, beginning a graphic polygon while a copper
layer was active would result in the preview being drawn in the color of
the active copper layer.
Also fixes some interactivity issues in the microwave tools around
single-click tools that have initial properties dialogs. Those
need to act kind of like a hybrid between single-click and two-click
tools.
Fixes: lp:1751381
* https://bugs.launchpad.net/kicad/+bug/1751381
This introduces a new util function in geometry_utils which snaps a vector
to axes or 45 degree lines. This can be used whenever you want to
snap a vector to these angles, but still want it to stay on a grid.
This snapping is used for the dimension tool and the ruler tool.
This is substantially simpler for two-point tools that the method
used by the line tool, which uses DIRECTION_45.
Fixes: lp:1780826
https://bugs.launchpad.net/kicad/+bug/1780826
Circles are defined by center and a point on their edge. This requires
the user to do extra math to figure out the size of the circle. The
patch allows the user to edit and draw circles using radial coordinates.
This allows the user to selectively disable the snap-to behavior when
placing stand-alone vias. Full solution will require an update to the
segment distance calculation that takes into account the rounded line
caps.
Fixes: lp:1769523
* https://bugs.launchpad.net/kicad/+bug/1769523
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
When a rotation/flip command was issued when a newly placed text
was hovering over an existing item - the item underneath would be
affected by the command and the new text would be discarded.
Fixes: lp:1744152
* https://bugs.launchpad.net/kicad/+bug/1744152
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
This patch adds functionality to the Pcbnew draw tool to show the dx and
dy of the current segment being drawn if the relative origin (pressing
spacebar) is not already set (i.e. if those coordinates are ( 0, 0 ) ).
You can set the relative origin while using the draw tool by pressing
spacebar. The relative origin is reset on exit of the tool.
fixes: lp:1736133
* https://bugs.launchpad.net/kicad/+bug/1736133
SHAPE_POLY_SET: fix crash in VertexCount when it is a empty poly set, or when params are incorrect.
minor other fixes:
warning in degug mode in dialog_dxf_import_base.cpp
pcb_painter.cpp: remove a useless debug line.
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
- ratsnest is updated now when undoing in legacy view
- select whole net regression
- local ratsnest in the GAL regression
- pick correct zone net for stitching vias
- mark nets as dirty on net propagation to force ratsnest update
Todo:
- cleanup board algorithm is still broken
The zone creation in DRAWING_TOOL was a complex event loop whici
simultaneously managed the event handling, construction of the preview
polygon and the creation and commiting of the zone, all in the same
scope. This has been broken into several pieces:
* POLYGON_ITEM preview item, used to preview the polygon in progress
* POLYGON_GEOM_MANAGER is a class that collects points from user input
and used them to describe a polygon's geometry, including calculation
of 45-degree constrained leader lines
* ZONE_CREATE_HELPER is a class which deals with creating zones based on
geometry from a geometry manager and parameters from the DRAWING_TOOL
* The (much simpler) event loop in DRAWING_TOOL drives the
POLYGON_GEOM_MANAGER. With a minor refactor, this loop can be reused
in future for other polygonal tools if wanted.
The polygon preview now has a translucent fill which makes it easier to
visualise the zone.
This also adds the Close Zone Outline and Delete Last Corner actions as
part of the new event loop.
Fixes: lp:1663885
* https://bugs.launchpad.net/kicad/+bug/1663885
Fixes: lp:1667885
* https://bugs.launchpad.net/kicad/+bug/1667885
This adds a richer overlay to the arc-by-three-points tool in Pcbnew,
including more guide-lines and a live display of radius and angle.
Also included is ability to go back to the previous step (if setting end
angle, you can go back to setting start point, etc) using Backspace, and
Ctrl snaps the start/end angles to 45 degree multiples.
This adds new classes
* MULTISTEP_GEOM_MANAGER: represents a generic "geometry manager" that
builds up some geometrical construction based on a sequence of points.
Used by:
* ARC_GEOM_MANAGER: handles the logical flow of constructing an
arc by centre-point, set radius, set angle. This moves the logic out
of the Pcbnew DRAWING_TOOL event loop in drawArc().
* ARC_ASSISTANT: graphical overlay to communicate current arc shape to
the user during the drawing process
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
This just uses the same hatch lines that are built into the zone as
legacy.
They are always drawn, even when there is a fill, as if the fill
doesn't reach the corners, the hatches can be seen.
Fixes: lp:1487043
* https://bugs.launchpad.net/kicad/+bug/1487043
This is used to provide menu entries that allows cancellation of
interactive drawing and routing tools without needing the keyboard.
It is provided in the drawing tools and the router tool.
The cancel event doesn't have any new functionality (e.g. track rip-up
for the PNS router - lp:1448460), this just adds it to the menu, where
it behaves the same as an Escape keypress.
Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
This action launches the normal interactive zone tool, but re-uses the
settings from an existing zone, based on a flag passed to the main zone
function.
Break a chunk of the new zone tool out into a separate function to keep
the code clear. When zone cutouts and similar zone tools are added,
they'll get the settings from existing zones.
This commit now used std::unique_ptr for the temporary zone item, which
simplifies handling of the ownership of that item.
This makes "rotate" into two separate TOOL_EVENTs, which each have a
"multiplier" parameter.
Also added is a namespace for 'free functions' that use TOOL_EVENT
public interfaces (perhaps with other inputs too) to centralise some
decision-making and calculations.
Fixes: lp:1660731
* https://bugs.launchpad.net/kicad/+bug/1660731
Automatically switch to a drawing layer, if a copper layer was
preselected. No annoying message boxes.
Do not deactivate the tool on layer switch.
Replaced setting updatePreview with direct calls to VIEW::update
Line width is kept in m_lineWidth for all shapes.
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
In principle, this patch reverts 2eefa117. The difference is removal of
one unused method (SELECTION::clear) and fixing hidden overloaded
virtual methods warnings.
Fixes: lp:1657569
* https://bugs.launchpad.net/kicad/+bug/1657569
Add a class TOOL_MENU, which provides a management class for a
CONDITIONAL_MENU and a set of CONTEXT_MENUs. The aim of this is to
provide a central place where all TOOL_INTERACTIVEs can get a "basic"
context menu that either they or other tools can register new items and
sub-menus against.
This means that "top-level" tools no longer need to manage the lifetimes
of any CONTEXT_MENUs that they add, and can also delegate simple menu
display functions.
The GAL line segment tool now listens to the global line segment 45
degree locking preference, with Ctrl used to invert the behaviour. The
behaviour therefore follows the setting normally, and the user can
override when needed with Ctrl.
Fixes: lp:1635718
* https://bugs.launchpad.net/kicad/+bug/1635718
- Finalize transition to BOARD_COMMIT (removed all remaining uses of PICKED_ITEMS_LIST) and implicit view/ratsnest updates
- Simplified SELECTION class, it now can be directly added to a VIEW
- Removed unnecesary casts and templates
- Introduced C++11 features (range based for, lambdas) where they improve code readability
- Added non-undoable COMMITs, which can be used to propagate change notifications to interested listeners (e.g. ratsnest/view)
The standard library requires iterators passed to functions that modify the
container to be mutable iterators, but GCC's implementation accepts
const_iterator in some places where these are only used to mark a place,
but the actual modification happens through a different parameter.
As this breaks implementations that use the passed iterator to modify the
container (e.g. because they use a different data organization), this is
not portable; because we already have a non-const reference to the
container anyway, this is trivially fixed as well.
* Fix segfault caused by invalidation of the end item by
PNS_LINE_PLACER::UpdateSizes().
* GAL zone drawing tool updates the ratsnest after zone drawing is complete.
* Fixed performance issue in zones processing using strict simplification
only for the final filled area.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
Seth Hillbrand
Jeff Young
John Beard
jean-pierre charras
Martin McNamara
Maciej Suminski
Ronnie Gaensli
Tomasz Włostowski
Robbert Lagerweij
Jon Evans
Maciej Suminski
Dick Hollenbeck
Chris Pavlina
decimad
Simon Richter
Johannes Agricola
Andrew Zonenberg