8ffd4f636a
SHAPE_ARC::update_bbox(): use double instead of int to calculate radius, and
...
if the radius is too large (> INT_MAX/2), consider arc as a segment to avoid overflows.
Nor perfect, but it avoid some issues when calculating bbox.
2024-02-29 18:01:13 +01:00
d04d74c511
Highlight nets and show length tuning status when adding tuning patterns.
...
Also fixes length preview when hovering over joints.
Also prevents asserts when hovering over arcs.
Also prevents adding a tuning pattern on other tuning pattern.
(cherry picked from commit 711c6141a8
2024-02-23 20:29:18 +03:00
ffa6adec96
Add a cache for TrueType contours and triangulation data.
...
Also returns minimumSegmentLength to its former value as
it doesn't appear to be required to fix
https://gitlab.com/kicad/code/kicad/-/issues/11463 .
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/16568
(cherry picked from commit 162e8962f7
2024-02-23 16:53:29 +01:00
745c52c2b7
Update triangulation
...
Allow for overlapping points in input polygon. This is relatively
common on a grid and should be used as potential split points to shave
additional ears
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16933
2024-02-12 15:20:08 -08:00
11f5908761
Revert the SHAPE_ARC::Collide() part.
...
The arc width appears to be handled elsewhere (at least in
the test suite).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16951
2024-02-12 17:51:14 +00:00
c6c1dbb844
Don't skip caching triangulation for failure
...
Failed triangulation can have multiple causes but we don't have another
approach, so skipping the cache just causes the same issue to be raised
again and again
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16946
2024-02-12 09:39:22 -08:00
d5ac0ff768
Fix SHAPE_ARC::BBox() and Collide() to honour m_width.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16951
2024-02-12 16:59:57 +00:00
1122d80388
Better support for arcs in tuning patterns.
2024-01-31 23:38:05 +03:00
7276486756
Finish fixing SHAPE_LINE_CHAIN::Slice
2024-01-31 19:17:46 +03:00
79aba50c23
Finish fixing SHAPE_LINE_CHAIN::NextShape and add tests
2024-01-31 19:17:46 +03:00
e950475bc3
Add assert to SHAPE_LINE_CHAIN::Segment + Deduplicate code
...
CSegment should have the exact same logic as Segment
Also, moving definition to .cpp file to reduce need to rebuild every time
2024-01-31 19:17:46 +03:00
effed5dfdf
Fix SHAPE_LINE_CHAIN::Remove and SHAPE_LINE_CHAIN::RemoveShape
2024-01-31 19:17:46 +03:00
673e23c2e6
Fix and simplify SHAPE_LINE_CHAIN::Append( SHAPE_ARC ) + QA tests
2024-01-31 19:17:46 +03:00
34942290a2
SHAPE_LINE_CHAIN: Fix SetClosed() logic
...
SetClosed should unwrap the chain when there are coincident points at the
start.
2024-01-31 19:17:46 +03:00
7593863245
SHAPE_LINE_CHAIN: Fix and simplify ShapeCount()
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15754
2024-01-31 19:17:46 +03:00
c72ba189cf
Fix SHAPE_LINE_CHAIN::Slice following NextShape() changes
2024-01-31 19:17:46 +03:00
e9fbb36538
SHAPE_LINE_CHAIN: Fix and simplify NextShape() + remove PrevShape()
...
NextShape() function was too complex (trying to go back and forwards).
We only used PrevShape() in one place, so removed that usage.
Added QA tests
2024-01-31 19:17:46 +03:00
079478f989
EDA_ANGLE: use constexpr for constant angles
...
Remove all statics in the class and instead use constexpr to
ensure correct ordering
2024-01-31 19:17:46 +03:00
3cf8b718f3
Don't truncate if not needed
2024-01-26 09:11:11 -08:00
8410a5e685
Coding conventions and cleanup.
2024-01-23 16:03:25 +00:00
f1dacf7d92
Updated revision of polygon triangulation from 0a67dd3fdd
...
This maintains the primary goal of ensuring that bad splits do not allow
the triangulation process to continue. Instead, we boot this back up to
the top-level where we will simplify the polygon before triangulating
again.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16624
2024-01-18 11:07:40 -08:00
e4a0b9c7ed
Revert "Revise triangulation"
...
This reverts commit 0a67dd3fdd
2024-01-18 11:07:40 -08:00
d512e09eb8
std::isnan is not constexpr in C++17
2024-01-16 18:42:37 +03:00
4c630e5aec
KiROUND: make sure input type is floating point before checking for nan.
2024-01-16 17:25:46 +03:00
f99505e190
Fix arc editing bugs when endpoints match.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16532
2024-01-16 16:17:45 +03:00
33c97da0fa
Performance enhancement.
2023-12-27 13:52:02 +00:00
5c334c147b
Make some types auto-reference to prevent copies
2023-12-19 14:23:36 +00:00
a4b38fbb80
Coverity warning fixes.
2023-12-18 16:09:13 -05:00
cfa55d958a
performance efficiencies
2023-12-18 18:45:02 +00:00
8251fca66a
performance efficiencies
2023-12-18 17:39:29 +00:00
11805d6696
performance efficiencies
2023-12-18 17:01:55 +00:00
0a67dd3fdd
Revise triangulation
...
- Avoid double-splitting a single point
- Check for mid-line intersections
- Avoid splitting zero-area polygons
- Keep full z-list for intersection checks
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16241
2023-12-13 13:37:17 -08:00
bfcd087751
Add KiROUND for VECTOR2 types.
2023-12-02 17:08:56 +03:00
2d9eee93e2
Fixes for length tuning patterns.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16198
2023-12-01 08:44:10 +03:00
daf178b64f
Upgrade Clipper2 to 1.3.0
...
Fixes a number of minor inflation issues including slivers when
overlapping points are inflated
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16182
2023-11-28 16:02:39 -08:00
7fd9226bec
Fix issue in CalcArcCenter( VECTOR2D& aStart, VECTOR2D& aMid, VECTOR2D& aEnd )
...
It happens when the segment (aStart, aMid) is horizontal
Probably also when the segment (aEnd, aMid) is horizontal
Slopes with value 0.0 are set to double:: epsilon(), but it was a too small values
generating broken calculations.
Now set to 1e-10 (it seems working).
Fixes #16089
https://gitlab.com/kicad/code/kicad/-/issues/16089
2023-11-18 20:08:26 +01:00
648b4a7689
TransformOvalToPolygon: make segments align at 45 deg angles.
2023-11-06 14:50:40 +03:00
24ca7add42
Don't clamp arc centers quite so aggressively.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16029
2023-11-06 00:45:19 +00:00
bfd3e71a88
Don't show integer overflow errors in release builds.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15529
2023-10-28 15:06:32 -04:00
84f58f36d4
Coding policy fixes.
2023-10-28 14:45:44 -04:00
b8310efd19
Coding policy, Doxygen comment, and spelling fixes.
2023-10-20 14:32:54 -04:00
be1008cbd8
ADDED: Heal Shapes; Fix discontinuities in gfx import and Cleanup dialog.
2023-10-17 10:29:43 +03:00
2b28580f0c
Comments.
2023-10-15 17:59:11 +01:00
62d959ed0e
Don't assume an error location for PAD::GetEffectivePolygon().
...
While ERROR_INSIDE was good for plotting, 3D generation, etc., it's
not good for generating router hulls.
Also reverts part of the change to always use polygons for PNS::SOLIDs. A single shape in a SHAPE_COMPOUND will be faster (and
more accurate).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14898
2023-10-13 13:59:26 +01:00
8b21a260c9
Refactor MEANDER_PLACER_BASE::cutTunedLine to SHAPE_LINE_CHAIN::Split.
2023-10-08 02:41:17 +00:00
f9efed692d
Pick location closest to aSeg.A in SHAPE_COMPOUND and SHAPE_RECT Collide.
2023-10-06 16:05:05 +03:00
92ef40327d
Add accuracy parameter to SHAPE_POLY_SET::PointOnEdge.
2023-10-06 15:56:46 +03:00
de0c1218c3
Add a method to offset line chains.
2023-10-06 15:50:37 +03:00
8a22a8fa69
Add aExact to SHAPE_LINE_CHAIN::Split.
2023-10-06 15:50:37 +03:00
d7863b09c5
Move CORNER_STRATEGY out of SHAPE_POLY_SET.
2023-10-06 15:42:50 +03:00
jean-pierre charras
Alex Shvartzkop
Jeff Young
Seth Hillbrand
Roberto Fernandez Bautista
Ian McInerney
Wayne Stambaugh