Pcbnew: Drc dialog: fix a old very minor bug.
Added: single click on an item in marker list moves the board graphic cursor on the corresponding marker location on the board
Double clicking is not modified.
* Fix offset errors when scale factor greater is than one.
* Changed behavior of fit in page when not drawing border and
title block to fit board outline in page.
* Fix offset errors when mirroring (still not 100% correct on MSW with
wxWidgets 2.9.4).
* Lots of the usual code cleaning and simplifying.
their type, by using the more abstract PLUGIN::Footprint*() functions.
This is an intermediate phase only, other changes will be necessary as library table support comes in.
Encapsulate usage of library path searching, since that will go away as library table support comes in.
Add FOOTPRINT_EDIT_FRAME::{get,set}LibPath() and FOOTPRINT_EDIT_FRAME::{get,set}LibNickName() functions
to provide this encapsulation.
* If this param is set to 0, the previous behavior is used.
* Else the solder mask is plotted as polygon, with shapes near than this min width value are merged.
Pcbnew in nanometer version: fix a serious rounding issue due to the fact dialogs were using 4 digits for mantissa.
* This is not enough for nanometer coordinates ( 8 are needed to display a value in inches),
* so sometimes after closing a dialog, some coordinates were modified, although no new value was entered.
Minor other bug fixed.
SVG export does not use no more wxWidgets wxDC.
In pcbnew SVG files can be created by plot menu (in B&W) or export SVG menu (B&W or Color).
Export SVG menu is more suitable to create a view of a board, and plot menu is better to create a B&W document of silkscreen layers.
(In the future, the 2 menus could be merged, because they are not very different).
Note: pcbnew plot code is cleaned, mainly in dialog files, but still needs more cleanup.
Mainly to plot drill maps, but can be used to plot boards, for documentation.
The print svg still exists, but the plot SVG has more options (mirroring, holes in pads),
however print svg allows color print, and full board printing, and plot does not.
and therefore tracks are now dragged when a end point is inside a pad, not necessary on the pad position.
However, drag functions still need more cleanup.
therefore tracks which have a end point inside a pad, but not necessaryexactly to the pad position are seen as connected, and are no more removed.
Side effect: reconnect to pads option is removed, because it is useless.
TODO: use this algorithm in drag functions.
Minor other fixes
Kicad manager: shows now svg files in tree files.
Pcbnew: fix incorrect printing (board out of page) when creating drill map in postscript format ( noticeable mainly for small boards)
All: press ctrl+shift key when moving the mouse allows the graphic cursor to be moved outside the grid.
(useful to place graphic objects, texts in any position, regardless the current grid)
This is *a work in progress*, so some features are missing, and/or could be modified.
Mainly keepout zones are not yet exported to autorouters, and pads are not taken in account.
Some code cleanup in polygon.*
When reading board files, the net 0 was stored twice.
It creates only log messges in debug mode, because the list of nets is rebuild after reading files.
* Derive the pcbnew copper zone and non-copper zone dialog windows from DIAG_SHIM,
which injects some template code.
* Update UIpolicies.txt to talk about DIALOG_SHIM support.
* Add zone support to eagle_plugin.
* Organize ZONE_CONTAINER class declaration for future privacy and accessors.
Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Fix bug in PCBNEW dialog_pad_properties.cpp that I introduced several days ago.
The m_Master_Pad stuff is stored in the PCB_EDIT_FRAME's BOARD_DESIGN_SETTINGS,
not in the FOOTPRINT_EDIT_FRAME's BOARD_DESIGN_SETTINGS (i.e. not stored in
the module editor's dummy BOARD). Now we properly initialize the
DIALOG_PAD_PROPERTIES::m_Pad_Master reference to the correct master pad
dope, instead of to the dummy module BOARD's master pad, which is not used.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
subclass DIALOG_SHIM support.
Tried dialog_drc but it has nesting problems due to use of DRCLISTBOX, which
needs to be put into its own header file to untangle.
* make 2 bitmaps more visible.
* fix incorrect screen redraw when rotating a component.
* netlist : the pcbnew advanced format can be now stored (persistant option) in project config.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
which is in turn already within BOARD.
* encapsulate class D_PAD with accessors, making data private.
* make D_PAD::GetBoundingRadius() do its longer calculation lazily, based on
m_boundingRadius == -1.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
* Added a dialog to select options: one or 2 files, units (mm or inch), and force INSERT option.
* code cleaning
* Modify corresponding icon in menu to show a footprint, not a schematic component.
* Enhance class PLUGIN's comments to improve their value as instructional.
* Switch #includes from "file.h" to <file.h>, and fiddle with search paths
by using include_directories(BEFORE ...)
* dialog_page_settings did not have symmetrical space on its right border.
And it now remembers it last position and size within a program session.
* base_screen.cpp is now compiled twice, once for {pcbnew,cvpcb} and once
for eeschema, in preparation for "compile time" support of internal units
rather than "runtime" support.
This feature is very useful for electronics hobbyists who use DIY PCB technology
(both toner transfer and photoresist methods).
Also width correction may be useful for PCB designers who take care of track width etching.
This patch also fixes some minor PS plotting issues.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
Added configuartion option KICAD_NANOMETRIC for this.
* With option set to false: *
- it should work and compile as usual
- some values are saved with decimal point (which should be backward/forward compatible as old versions should just drop fractional part)
* With option set to true: *
- lengths in Global Design Rules should be settable 1nm steps.
FROM/TO_LEGACY_LU(_DBL) macros introduced for easy interconnection between old and new units.
More about code refactoring in connect.cpp: RecalculateAllTracksNetcode() is 50 times faster with a board using 27000 tracks
Use right icon in pcbnew for load board and new board.
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Add visible clearance when edit node or track segment,
add parameter "show clearance for new or edited track with via area"
in "Display options" menu.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Replace use of wxICON by new icons declaration.
* Remove unused files.
* Fix filenames inconsistencies between old and new icons.
* dialog_erc handle variable size icons in erc matrix.
* Add hotkey fast switch to two grids: for place and trace
Alt+"1" - switch grid for place module
Alt+"2" - switch grid for trace
This two grid set in dialog - menu Preferences->Dimensions->Grid.
* Add hotkey switch grid:
"`" - switch to next grid
Ctrl+"`" - switch to previous grid
* Add hotkey switch track width:
"W" - switch to next track width
Ctrl+"W" - switch to previous track width
cmakemodules:
* Add GOST to KICAD_BUILD_VERSION if define KICAD_GOST.
* Changed <wx-2.8/xml/xml.h> to "xnode.h" in pcbnew_config.cpp to fix bug
when building against wxWidgets 2.9 and above.
* Convert broken wxXmlNode code to use XNODE.
* Overloaded XNODE constructor for creating child nodes.
* Translate French naming conventions.
* Translate French comments.
* Remove tabs from several source files.
* Coding style policy and Doxygen comment fixes.
* Add hotkey "P" - place item
* Add record and play macros for sequence hotkey.
Macros set to numeric key 0..9.
<Ctrl>+<numkey> - start record macros
<hotkey> <mouse move> ... <hotkey>|<mouse place>
<Ctrl>+<numkey> - end record macros
<numkey> - play macros
* Add menu save/read macros to/from xml-file
* Add configure rotate angle for rotate module: 45 or 90 deg.
* fix segfault when move/drag segment if disconnected to pad
* Check user write permissions before saving project, board, and footprint
library files.
* Append read only to file name and path in title bar when the user
does not have write privileges.
* Rename class WinEDA_ModuleEditFrame to FOOTPRINT_EDIT_FRAME.
* Lot's of Doxygen comment and coding style policy fixes.
Pcbnew: refresh issue with dialog designe rules under wxWidgets 2.9.2 under WINDOWS (replace wxChoiceBox by wxComboBox, should not change anything for users)
Eeschema: some issues in libedit (when editing a pin )
* Set default button on all dialogs that do not already have a defined
default button. The only exception is the EESchema net list dialog
which needs converted over to wxFormBuilder and due to it's design makes
setting the default button in any tab other than the default tab
problematic.
* Fix escape key dialog handling bug in EESchema print post script
dialog.
* Remove clearance and net class name read only text boxes from PCBNew
auxiliary tool bar.
* Display full net class information in message panel when an object that
supports net classes is selected.
* Move coordinate string conversion function to EDA_DRAW_FRAME object and
made it more versatile.
* Refresh message panel text when units change.
* Fix grid select box update bug on context menu.
* Fix via size and track width select box update bugs.
* Fix layer pair indicator button update bug.
* Fix auto track width tool bar control enable bug.
* Fix via size and track width select status bug in context menu.
* Fix layer select box and layer control widget select bug when current
layer is removed.
* Add virtual function to notify objects derived from EDA_DRAW_FRAME that
the units setting has changed.
* Coding policy class naming fixes.
* Old control state handling code completely removed in all applications.
* Factor common control state handlers into EDA_DRAW_FRAME.
* Replaced EDA_ITEM test for newness with IsNew() method.
* Factor vertical right toolbar command handlers out of giant edit command
switch statement in EESchema and PCBNew.
* Rename all member variables and methods that reference the cross hair
code in draw panel object from cursor to cross hair to eliminate confusion
between the two concepts.
* Rename cursor capture call backs in draw panel object to improve code
readability.
* Create helper class for turning off the cross hair while drawing.
* Remove redundant block clear code.
* Remove redundant mouse capture call back reset code when end capture
call back is called.
* Remove unused function definitions in base draw frame object.
* Lots of minor coding policy and doxygen comment fixes.
* Remove base screen methods from draw frame object and correct current
screen methods in derived objects.
* Move restore old wires function code into schematic screen object.
* Make add junction method use current screen position instead of store
position.
* Move poly line ghosting function into the delete current segment method
as that was the only place is was being used.
* Add method to base schematic object of testing if object has a label
that can be incremented.
* Simplified the schematic hierarchy traversing code.
* PCBNew Doxygen warning fixes.
* Remove all occurrences if #ifdef USE_WX_ZOOM and all associated code within
the #else/#endif block ( old zoom code ).
* Removed the build option for USE_WX_ZOOM from CMakeList.txt and config.h.in.
* Removed all scaling code in base screen object.
* Fixed buffered paint and buffered client DC on Windows. Buffering works
properly on Linux and Windows.
* Modified kicad_device_context.h to automatically uses buffering on platforms
where double buffering is supported natively.
* Remove all of the scaled versions of the drawing functions in gr_basic.cpp
and any support code.
* Removed all traces of ActiveScreen global variable from eeschema and
gerbview.
* Renamed Recadre_Trace to RedrawScreen in draw frame object.
* Renamed PostDirtyRect to RefreshDrawingRect in draw panel object.
* Lots of code cleaning an Doxygen comment improvements.
This was due to a duplicate constants ( with sligtly different values) used to select items in some seach functions that broke filtering. Old definitions removed.
* Move schematic wire and bus break code into schematic screen object.
* Move schematic test for dangling ends into schematic screen object.
* Remove left over debugging output in schematic screen object.
* Remove unused file eeschema/cleanup.cpp.
* Fix bug in schematic line object hit test algorithm.
* Fix a string concatenation compile error added in r2752.
* Rename class WinEDA_BasicFrame to EDA_BASE_FRAME.
* Rename class WinEDA_DrawFrame to EDA_DRAW_FRAME.
* Rename class WinEDA_DrawPanel to EDA_DRAW_PANEL.
* Encapsulate file name member of base screen object.
* Encapsulate associated screen member of schematic sheet object.
* Create add screen method to schematic sheet object to simplify setting
the associated screen.
* Move the change file name code in the schematic sheet object to the edit
sheet method in the schematic editor frame object to eliminate message
dialogs.
* Improve reference counting in schematic screen object.
* Add helper type definitions for changing schematic object storage to C++
containers.
Very minor enhancement in module edition dialogs.
Fix a minor bug in design rules editor: in Global Rules Edition: drill values > via diameter not checked
and the first item (track or via) in list was not checked (explains Bug 702177, that is not really a bug)
Dick Hollenbeck
jean-pierre charras
Wayne Stambaugh
marco.
Marco Mattila
Lorenzo Marcantonio
Miguel Angel Ajo
brian.
Andrey Fedorushkov
lajos kamocsay
Alexander Zakamaldin
Vladimir Ur
Roman Bashkov
Marco Serantoni