f31e5ea783
pcbnew: Fix pads losing nets after Undo.
...
Wasn't fixed in all places after being broken in
13f5c78e89
2023-02-23 22:06:39 +03:00
f0dd32c3a7
Fix plugins in pcbnew breaking by opening fp editor
2023-02-23 14:20:03 +00:00
c2a4dd93e8
Fix typo in appearance_controls.cpp
2023-02-22 20:35:36 -05:00
d8f4d04093
Disable auto-refill zones
...
We need a more advanced dirtying system for this to work out for
many users, it turns out. Right now too many changes cause full
zone refills which interrupt workflow.
2023-02-22 20:13:55 -05:00
af10878954
Use Chamfer lines when deflating
...
Rounded line ends when deflating leads to microscopic jags in the
outline that are not visible but add substantial computation time and
minor error when computing polygon offsets.
Instead, the chamfer deflate method prevents these jagged lines by
clipping angles < 90° by the error level. This does not impact deflate
calls where we explicitly require the angles to be maintained
2023-02-22 16:24:26 -08:00
da61d31f44
Remove superfluous Simplify() call
2023-02-22 16:24:26 -08:00
22bca5c2a0
Disable link maps by default and fix compile issue with lld linker
...
The link maps were actually disabled by default before
912f1d5cechttps://github.com/llvm/llvm-project/issues/60932
Co-authored-by: aris-kimi <aris_kimi@hotmail.com>
Co-authored-by: Ian McInerney <ian.s.mcinerney@ieee.org>
2023-02-22 23:18:36 +00:00
43d3a18b86
Improve HiDPI handling of appearance/layer controls
2023-02-22 09:20:36 -05:00
89ef6b36f4
Fix layer widget in HiDPI situations
2023-02-22 09:20:30 -05:00
c6e417c19c
Fix missing override statements
2023-02-22 01:44:06 +00:00
912f1d5cec
Modernize setting link map linker flags
2023-02-22 01:44:06 +00:00
bcb93e9aa7
Modernize setting of compiler definitions in CMake
...
add_compile_definitions was added in 3.12, and our minimum is now
greater than that.
2023-02-22 01:44:06 +00:00
e30e510354
gen drill map: fix duplicate suffix in map filenames if gbr drill fmt is selected
...
Fixes #14026
https://gitlab.com/kicad/code/kicad/issues/14026
2023-02-21 14:22:50 +01:00
db66419f02
Teardrops: fix incorrect shape in some cases.
2023-02-20 09:06:21 +01:00
3a11d90d92
Teardrops: handle arcs in tracks.
...
Fixes #13858
https://gitlab.com/kicad/code/kicad/issues/13858
2023-02-19 14:44:37 +01:00
30a49462fe
Fix crash parsing cadstar
...
Fixes sentry KICAD-B2
2023-02-19 08:06:35 -05:00
aacc9746e3
Yeet the last of wxSize/wxPoint to stop leaking gdicmn everywhere
2023-02-18 22:57:18 -05:00
bc8f81b14d
PCB Search Pane: show Board Setup / Net Classes on net activation
2023-02-18 15:41:26 -05:00
dffd2da8c8
Fix the shared_lock added and micro-opt the reindex
2023-02-18 11:28:19 -05:00
c7bb6f5778
Treat dimensions in fp as text for bbox calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13976
2023-02-18 13:04:12 +00:00
cad607ae84
Hide parent property in footprint editor
2023-02-17 20:40:09 -05:00
f7d59f2e89
Enable properties panel in footprint editor
2023-02-17 20:35:56 -05:00
f12f2b8420
PNS: Diff pairs can have different hole-to-hole size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13993
2023-02-17 19:56:02 -05:00
459473ccc3
PNS: Safety for evaluating item nets for rules
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13993
2023-02-17 19:56:02 -05:00
2975f53647
PCM: auto reload global libs after dialog is run
...
This adds Reset() method to KIFACE to reload global libs stored in
global static vars.
Also refactors some lib reload code in various frames to have
common MAIL_RELOAD_LIB handler.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12500
2023-02-17 17:24:32 +00:00
ecb28ddf1c
Prevent ghost image after canceling bitmap placement.
2023-02-17 03:53:44 +03:00
5b0f1376c0
Simplify code now that we no longer drop out on first rule fired.
2023-02-16 17:55:33 +00:00
978c2b074e
Negative clearance means test will be ignored, not rule.
2023-02-16 17:39:47 +00:00
407cdd63fb
Translatable strings.
2023-02-16 17:28:06 +00:00
911e013850
Pcbnew: Do not change visibility objects when changing Visibility layers
...
Fixes #13836
https://gitlab.com/kicad/code/kicad/issues/13836
2023-02-16 12:39:15 +01:00
9f10c142c4
Sync pcbnew selection with selected items after plugin is run
2023-02-16 02:29:06 +00:00
9d3f4bef6a
DRC: Verify overlapping layers in physical clearance
...
When checking the physical clearance on a layer, it is critical to check
that the via hole exists on that layer. Blind/buried and micro vias may
not overlap, so should be excluded from this check when they don't exist
on a particular layer
Similarly, we should only be reporting a single physical clearance error
for each item pair even though they may have multiple errors across
multiple layers in the case of via-via clearance
2023-02-15 11:35:24 -08:00
2032b8af59
Pcbnew: fix incorrect rotation of thermal spoke for rotated footprints.
...
If the footprint rotation is not a multiple of 90°, the thermal spokes
were not correctly rotated.
Fixes #13919
https://gitlab.com/kicad/code/kicad/issues/13919
2023-02-15 18:19:34 +01:00
40e1296a8b
Clear dirty flags after a move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11362
2023-02-15 14:50:31 +00:00
2d7c5c5c0f
Router: Do not collide items within a net tie footprint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13909
2023-02-14 21:08:36 -05:00
473979d686
Fix handling of PPI when loading embedded images
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13884
2023-02-14 19:42:06 -05:00
eb83f76bff
Allow plotting of multiple board layers per plot in Python.
...
Since the always plot the edge cuts layer option was deprecate,
the ability to plot multiple board layers was exposed through the
PLOT_CONTROLLER object.
Added the interactive plot information which was overlooked during
version 7 development.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13841
2023-02-14 09:49:20 -05:00
4b07e3e413
Common Actions: Find Previous
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8968
2023-02-14 08:21:37 -05:00
3e715c99c8
Swap: take S key now that it's available
2023-02-14 07:42:06 -05:00
e7fe69b97f
Better handling of vertex sorting
...
Nominally, the zcode of a vertex is unique. This is not 100% true,
however, as we must interlace two 32-bit numbers into a single 32-bit
number. Sorting needs to account for the possibility that the zcode
will be the same while other elements of the vertex are different. This
commit fixes the broken boolean logic to more clearly handle these cases
Fixes https://gitlab.com/kicad/code/kicad/issues/13867
2023-02-13 11:21:04 -08:00
8bab429c7d
Account for border when calculating text margin for text boxes.
...
Also fixes some unnoticed issues with the textbox dialogs (probably
dating from the move to wxWidgets 3.2).
Fixes https://gitlab.com/kicad/code/kicad/issues/13877
2023-02-13 17:08:29 +00:00
71b687622b
PCB Search Pane: activate item opens properties dialog
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12475
2023-02-13 10:57:05 -05:00
17059971e8
DIALOG_UNUSED_PAD_LAYERS: do not use TransferDataFromWindow for any button.
...
TransferDataFromWindow is called only when closing by a wxID_OK button
Fixes #13865
https://gitlab.com/kicad/code/kicad/issues/13865
2023-02-13 10:26:46 +01:00
499b58f505
ADDED: user-specified gap and linewidth for bounding hull creation.
2023-02-12 23:16:45 +00:00
f409837d26
Fix a stray ternary hidden under #if
2023-02-12 16:46:34 -05:00
837ba323fb
Add doc link to custom rules syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13727
2023-02-12 21:34:35 +00:00
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
2a5bb71fbd
ADDED operating point text variables for labels and symbols.
...
ADDED formatting for cursors and operationg points
Also fixes a bunch of bugs to make the new cursors work with .ac sims.
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
Fixes https://gitlab.com/kicad/code/kicad/issues/6965
2023-02-11 21:11:07 +00:00
e73366db5c
Add 3D viewer to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13559
2023-02-11 21:11:07 +00:00
aab237852b
Flatten Reannotation dialog.
2023-02-11 21:11:07 +00:00
0dcc34ddc8
Simplify Remove Unused Pads dialog.
2023-02-11 21:11:07 +00:00
362d85ef50
Special selection mode when in high-contrast with courtyard layer active.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
95fb3825bd
Fix some strings from V7's string freeze.
2023-02-11 21:11:07 +00:00
61dd4b7043
Properties: fix rebuilding when availability changes
2023-02-11 15:50:51 -05:00
0b3928d38f
Properties: add some validators for PAD
2023-02-11 15:50:51 -05:00
13391176ae
Remove DRC exclusions that no longer have items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13802
2023-02-11 20:43:00 +00:00
4d6e06d349
Add grid reset to place menubar.
2023-02-11 13:20:35 -05:00
eb240fda9a
Properties: introduce validators; re-enable zone hatch settings
2023-02-11 11:44:58 -05:00
254168c788
Properties: introduce method chaining for initialization
2023-02-11 11:44:58 -05:00
6948a0bebd
Expose new netclass storage to SWIG
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13337
2023-02-11 09:50:24 -05:00
b5191c8c22
Fail-safety in spreadRectangles.
2023-02-11 16:42:27 +03:00
b888714ed5
Don't discard temporary item being placed if placement is rejected
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13697
2023-02-11 08:40:33 -05:00
e066454c61
Zones: use metric defaults and limits instead of mixed units
...
Update testcases to reflect new defaults
2023-02-11 07:39:29 -05:00
fda3feaf3f
Revert "Add doc link to custom rules syntax help."
...
This reverts commit 7874735810
2023-02-10 15:33:03 -08:00
90a388571e
Fix copy-pasta
...
testing 'othervia' for dynamic_cast success needs to use `othervia`
rather than `via` which might still be null
Fixes Sentry issue KICAD-5K
2023-02-10 13:33:21 -08:00
6fb9d190ac
Use the common subset of nets for local update
...
When adding new data, we may have differing sizes of the dynamic
ratsnest and our local copy, so ensure that we are only referencing
elements that exist in both
2023-02-10 12:50:29 -08:00
89429996da
Fix a crash in rectpack2D when unable to pack footprints.
2023-02-10 22:45:07 +03:00
f4825cdd8f
Allow same-net, same-priority zone filling
...
When two zones with the same net and same priority overlap, they should
both be filled, matching the behavior of v6. If you would like an
explicit override of one or the other, you need to set the zone priority
higher. Relying on the UUID as a tie breaker is good for zones with
different nets but creates unexpected changes from v6 when applying it
to zones of the same net
2023-02-10 11:07:08 -08:00
e2353a2849
PANEL_BOARD_STACKUP: Ensure UI is re-linked to storage when importing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13835
2023-02-10 12:58:04 -05:00
538ee12188
Pcb editor: fix crash when trying to activate the "place anchor" tool.
...
"place anchor" tool exists only in the Fp editor. However, the hotkey
to activate this tool was also active in the board editor. Now disabled.
2023-02-09 16:29:33 +01:00
92a61b187f
Properties: Hide zone fill type settings for now
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13811
2023-02-08 21:56:15 -05:00
b71fa91bc4
Don't write outside of overrides array on pad zone_layer_connections.
...
Use std::array to catch future errors in Debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/13803
2023-02-08 01:32:52 +03:00
a493a2c822
kicad-cli, pcbnew pàlot: honor the color options when ploting pdf files
...
--black-and-white and -t were shown in help, but not handled
Fixes #13805
https://gitlab.com/kicad/code/kicad/issues/13805
2023-02-07 20:20:45 +01:00
82d9176782
FOOTPRINT::Flip(): add missing PCB_BITMAP_T.
...
Fixes #13785
https://gitlab.com/kicad/code/kicad/issues/13785
2023-02-05 18:41:58 +01:00
f2f54fe926
Improve zone-layer-connections terminology and comments.
...
This makes it clearer that the overrides are not inverses of each
other -- one overrides the flashing state and the other overrides
the connection state (to other zones, not to everything).
Also fixes a bug where we were failing to check the force-no-connect
for pads.
2023-02-05 17:39:42 +00:00
c122fd0e36
Remove unused cache_optionally_flashed_connections.
2023-02-05 17:39:42 +00:00
f6fd85af85
CHANGED: Try to determine via/pad flashing state before filling zones.
...
If removing unused via annular ring option is enabled on a layer, then the via will have the ring if both:
- Via center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone the via hole intersects with has the same net
Pads will be flashed if:
- Pad center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone at the pad center has the same net
Fixes https://gitlab.com/kicad/code/kicad/issues/12964
2023-02-05 17:39:42 +00:00
bf1a8f2582
router: Fix clamp in meander corner radius calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13781
2023-02-05 07:22:38 +03:00
a59c1afa53
Fix two bugs in RTree polygon collions special case.
...
1) Special case doesn't work for polygons with holes
2) Fix special case to handle intersecting lines where neither end is
in the polygon.
Note that only (1) is required for the bug below. (2) was just
discovered while implementing (1).
Fixes https://gitlab.com/kicad/code/kicad/issues/13779
2023-02-04 13:46:40 +00:00
6b5eeeb861
Preferences dialog: try to reduce its width, in non English languages.
...
Remove some useless spacers, and do not force some widgets to have a to
large size (by removing empty areas).
Work in progress: one panel is still too big.
2023-02-04 14:36:14 +01:00
887c740c2e
Limit the number of potential netnames
...
Don't set text if outside of the clipbox. Text is non-cached so will
get redrawn on zoom
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-02-04 11:17:09 +01:00
8ecf64b6c5
Don't run DRC rules on non-existant layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13753
2023-02-03 15:08:31 +00:00
235925d62c
Clearer reporting of negative clearances.
2023-02-03 15:08:31 +00:00
0d083d0230
AllCuMask() and AllTechMask() are static, they do NOT modify "this".
2023-02-03 15:08:31 +00:00
b427ad80f6
Don't make unneeded copies of std::pairs
2023-02-03 15:28:53 +01:00
dde336ee40
Split connectivity mutex locking
...
Internal routines have no need for locking the mutex they already own.
While external routines that want to recalculate the Ratsnest do need an
exclusive lock before being allowed access
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-02-03 15:26:19 +01:00
8ce0a84ca7
Fix compatibility with older wxWidgets versions.
...
Fix also a compil warning
2023-02-03 08:24:38 +01:00
e20c86ad5e
Minor dialog layout improvements.
2023-02-02 16:54:52 -05:00
e60152e351
Fix island removal when copper->edge clearance is 0
...
Just testing a single point to find copper that is outside the board works
until the arc->segment conversion moves the board outline just enough to
have the filled copper slightly (few IU) outside of the converted outline.
Instead, we do an expensive check of comparing the size of the
intersection between the island and the island's intersection with the
board. If the intersection is at least half as large as the original
island, we can say with certainty that the island is inside. The margin
could be much smaller than half but this preserves the intent without
picking an arbitrary number that might be violated
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-02-02 19:19:26 +00:00
fcefb5f86d
Re-allows selection of bitmaps not owned by a footprint.
...
It was broken by my commit f8051d95Fixes #13747
https://gitlab.com/kicad/code/kicad/issues/13747
2023-02-02 18:09:37 +01:00
200bf696af
Fix importing of legacy netclasses
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13746
2023-02-02 08:29:43 -05:00
737318a24d
struct ZONE_DESC: ensure ENUM_MAP<PCB_LAYER_ID> is initialized before use it.
...
ENUM_MAP<PCB_LAYER_ID> is tested initialized in some other XXX_DESC,
but not in ZONE_DESC
Fixes #13699
https://gitlab.com/kicad/code/kicad/issues/13699
2023-02-02 09:11:27 +01:00
26b9d2f5ac
DRC: Allow disabling DP constraints in specific areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13743
2023-02-01 23:11:39 -05:00
7874735810
Add doc link to custom rules syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13727
2023-02-01 23:40:53 +00:00
6543d23d9f
router: Re-add electrical path lines drawing for length tuning.
2023-02-01 20:36:52 +03:00
7d6218acb4
Unify checkbox borders in Interactive Router Settings.
2023-02-01 07:46:42 +03:00
1c2345776e
Remove unused variable.
2023-02-01 07:28:55 +03:00
48e4005111
Fix diff pair router checking of min clearance
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13720
2023-01-31 19:53:35 -05:00
68eac74458
pcbnew: Fix strokeWidth truncation to integer mm in SVG polygons import
...
The polygon conversion algorithm mistakenly stored the stroke width of
filled polygons in an integer variable. As a result, all stroke widths
were rounded down to the next smaller integer mm size. This commit changes
the types in the relevant functions and variables from int to double.
2023-01-31 20:34:25 +00:00
f34aa947d3
Allow on-outline zones to be considered inside
...
Also ensure that calculated areas for island removal are absolute.
The on-outline zone can happen when the clearance to the edge is
particularly small.
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-01-31 12:32:23 -08:00
f8051d954a
Better handling of PCB_BITMAP items in a footprint.
...
- Ensure they can be erased in the FP editor
- Ensure they cannot be selected in the PCB editor (they are not show)
Fixes #13714
https://gitlab.com/kicad/code/kicad/issues/
2023-01-31 11:16:38 +01:00
44cfb1ea43
CADSTAR PCB: Don't create zero sized text items
...
Partially addresses https://gitlab.com/kicad/code/kicad/-/issues/13693
2023-01-30 19:56:22 +00:00
963e82ee7f
CADSTAR PCB: Correctly handle anticlockwise arcs
...
Also add some qa tests for EDA_SHAPE::SetAngleAndEnd
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13626
2023-01-30 19:56:22 +00:00
50e9685490
Check for tented vias before expanding solder mask.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13705
2023-01-30 17:56:35 +00:00
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
e928d72c3b
Fix relative step file export
...
Forgot to set the project relative path, and the library search path
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13696
2023-01-29 22:19:37 -05:00
5bdaf20af6
eagle: determine and use the minimum copper layer stackup count
...
Fixes: https://gitlab.com/kicad/code/kicad/issues/13484
2023-01-29 21:13:41 +00:00
971abcfc1a
Fix DP meander placer when tuning from an uncoupled section
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12212
2023-01-28 22:25:46 -05:00
68decdd4f2
Fix static event table derived object definitions.
2023-01-28 14:10:06 -05:00
d4a5e2caad
Fix crash when .kicad_pcb is renamed to .kicad_mod and load library attempted
...
Pick a random error message used elsewhere
2023-01-28 10:42:46 -05:00
d04cda35c5
Handle hidden attribute in fp-lib-table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13689
2023-01-28 09:23:25 -05:00
b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
4d811ba975
Enable layer arg for fp export svg
2023-01-27 23:45:42 -05:00
b4994a7fa1
Locked shadows should not be on overlay
...
These are supposed to render under the component
and do not need to be pulled to the front for overlay.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12486
2023-01-27 22:09:42 -05:00
51c8f2c119
Fix library sort order in library viewers
...
The lib table returns a properly sorted list of libraries already, which
we just iterate through. A std::set is a sorted collection, but uses a
different sorting function than the lib table, so appending to a
std::set breaks the initial sorting that was done already.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13530
2023-01-27 23:39:50 +00:00
f6dc48ead7
Pcbnew: Make "Substitute similarly named models" on by default in STEP export.
2023-01-27 23:32:23 +00:00
a3e3231605
Pcbnew: Increase the default size of the board setup dialog
2023-01-27 22:00:39 +00:00
8603c06ef3
Fix netnames.
2023-01-27 19:35:41 +03:00
13ce2ebf46
15% rendering optimization in PCB_TRACK::ViewGetLOD.
2023-01-27 18:37:43 +03:00
8268234aa1
Reverse shown-source logic so we report if it's the netclass width.
...
(whether or not it's *also* the previous track width).
2023-01-27 15:31:02 +00:00
675b6b5d5c
Fix logic error in ec4d377d
...
Also fixup goldens for importers for new default island mode
2023-01-27 10:16:56 -05:00
ec4d377d15
Stop removing islands for fully-isolated zones
...
It is hard for a user to tell what is going on when their zone
just doesn't fill at all. We catch isolated areas in the DRC so
we can just leave them alone here until the zone has at least one
non-isolated filled area.
Also change default back to always remove islands to reduce confusion
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13271
2023-01-27 08:57:18 -05:00
e3fa447f0c
router: Remove extra qualification.
2023-01-27 11:56:23 +03:00
0ff6cb49d6
router: When dragging tracks, don't snap to parts of the original line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10113
2023-01-27 11:06:36 +03:00
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
a872ed11bf
Fix paths for Copy default global library table.
2023-01-27 09:24:52 +03:00
a0236113da
Attempt fix to RATSNEST crash
...
We call 'RecalculateRatsnest' in multiple locations, this will
invalidate various pointers needed by VIEW::Redraw(). When this is
called through the normal connectivity routines, we have the mutex
locked to prevent conflict but we've added more locations that update
just the Ratsnest. The std::adopt_lock should take over the existing
lock when needed
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-01-26 17:32:38 -08:00
ec9e7eed90
Don't link DNP with Exclude from Pos files
...
Exclude from Pos file property follows the footprint but may be
different from the DNP property
Fixes https://gitlab.com/kicad/code/kicad/issues/13616
2023-01-25 13:54:12 -08:00
a6badd0313
Fix compile warning
2023-01-25 13:53:13 -08:00
2312cf34c4
Pay attention to knockout text when adding to DRC Rtrees.
2023-01-25 18:34:03 +00:00
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
a76a4f9788
Router: don't unnecessarily change track widths on layer change
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13546
2023-01-25 09:34:17 -05:00
ae812bdf39
Try to use the theme setting for the cli pcb svg export
2023-01-24 22:57:28 -05:00
e886ccacbd
Cleanup unused local variable.
2023-01-24 23:45:55 +00:00
769afa6fe6
Properties: refactoring
2023-01-24 12:08:37 -05:00
890103a012
Properties: Fix handling of mixed value selections
2023-01-24 11:51:26 -05:00
05198b896f
Move PCB_EDIT_FRAME::ExchangeFootprint to pcb_edit_frame.cpp
...
No idea why it was in the dialog file, but there is no good reason for that.
2023-01-24 12:54:05 +00:00
00e2bbac5a
Special-case net-ties for solder mask bridging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13646
2023-01-24 11:33:08 +00:00
b0ec006b81
The safety of running the event loop during doCloseWindow is debatable.
...
(Possibly a fix for Sentry KICAD-7T.)
2023-01-24 11:33:08 +00:00
8eae75e8d6
Suppress handling of selection events until delete is done.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13451
2023-01-24 00:07:40 +00:00
e713a3eac2
Handle cleanup safely
...
Make sure that the connectivity has successfully completed before
attempting to merge segments. Also avoids reaching into the shared_ptr
if we don't need to
Fixes https://gitlab.com/kicad/code/kicad/issues/13639
2023-01-23 15:56:46 -08:00
12b0a12d74
Handle DP checks for board minimum rules
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13640
2023-01-23 17:45:16 -05:00
efe12f2da5
Cleanup variable naming
...
Also remove ancient/unused code for lazy resolving
2023-01-23 22:21:12 +00:00
a9ed47f06c
Update KICAD6->KICAD7
2023-01-23 22:21:12 +00:00
509b39e9e4
Propagate nets within non-conflicting clusters immediately.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
ece775c53c
Blind/buried vias are drilled, and drilled holes need to avoid prior-burned holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13627
2023-01-23 16:25:29 +00:00
c430c88f9d
Immediate update of no-net objects when they're connected to something else.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
4a55b7998a
Standardize on longer phrasing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13514
2023-01-23 08:59:18 -05:00
e11012fe06
Properties: show via friendly name
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13635
2023-01-23 08:56:21 -05:00
09b83b95d0
PCB Editor: Locked filter unchecked by default
...
And some minor code style improvement in one place
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13246
2023-01-23 11:36:06 +00:00
136c150460
plot_brditems_plotter: fix crash (null poiner use) when run from kicad-cli,
...
with a not initialized plotter render settings.
Fixes #13633
https://gitlab.com/kicad/code/kicad/issues/13633
2023-01-23 11:50:27 +01:00
e0111f709b
Fix minor cosmetic issues in Print dialogs
...
Fixes #13629
https://gitlab.com/kicad/code/kicad/issues/13629
2023-01-23 09:21:23 +01:00
1bc3f77d2e
Coverity fixes
2023-01-22 22:48:31 -05:00
1aca216f18
Add DRC suggestions for Via_Type
2023-01-23 05:14:06 +03:00
91d154cd28
Add DRC suggestions for Shape
2023-01-22 22:35:12 +03:00
05eafdc08b
Add missing DRC Type suggestions.
2023-01-22 22:35:12 +03:00
bf8762c57c
Streamline color lookup (and a bit of wxS).
2023-01-22 17:18:03 +00:00
09cb222252
Change indeterminate checkbox behavior to be more intuitive
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13604
2023-01-22 12:10:45 -05:00
351f668645
Separate selection change updates from properties updates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13624
2023-01-22 12:10:45 -05:00
729b2deb5c
Use board layer names for properties grid.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13553
2023-01-22 15:47:57 +00:00
0ff32d20cd
wxS more things
2023-01-22 09:41:42 -05:00
03a64492e8
Handle all member vars if not doing a std::swap on "this".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13621
2023-01-22 13:00:18 +00:00
86c12d35b4
Small order change for three View menu items
2023-01-22 01:04:17 +00:00
005648f4db
The net inspector is a modeless panel, not a dialog.
...
No need for OK button.
2023-01-22 00:14:02 +00:00
8a9a63134c
Minor dialog adjustments.
2023-01-22 00:14:02 +00:00
3a9ef02fdf
Clean up handling of selection changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13620
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13609
2023-01-21 17:37:29 -05:00
df4f9d4c94
FP editor: fix crash when trying to save a footprint after removing its library
...
Fixes #13619
https://gitlab.com/kicad/code/kicad/issues/13619
2023-01-21 18:18:38 +01:00
12215647f1
Handler blind/buried/micro via drawing when all layers are hidden.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13607
2023-01-20 19:09:12 +00:00
6586a2ca66
PCB Editor: prevent scroll wheel on track size opening board settings
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13218
2023-01-20 12:13:16 -05:00
34810d24a5
Remove unique dummy text
...
Text that will be replaced programmatically should be specified as
"dummy" in wxFormBuilder to avoid adding unneeded translation strings
2023-01-20 09:11:08 -08:00
89d434255c
Run clearance rules for router status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13605
2023-01-20 14:19:58 +00:00
d9a90519f9
Flatten (and fix layout) of library table managers.
2023-01-20 14:19:58 +00:00
24dd402e29
Finish processing last pad in pad group, and trim whitespace from pads.
2023-01-19 15:48:32 +00:00
67eae77e9d
PCB/SCH/3D: Implement 3D cross-probing from schematic
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/3859
2023-01-19 10:39:47 -05:00
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
7e5a2450b8
Move multiple wxMessageBox to DisplayErrorMessage
...
Also provide protection for headless running in multiple callsites
Fixes https://gitlab.com/kicad/code/kicad/issues/13575
2023-01-18 16:54:01 -08:00
b99bd7633d
Allow commas, spaces in pad names for net-ties
...
Net tie groups are currently separated by comma. But comma is also an
allowed, albeit rare character for pad names. To allow pad names with
commas in net tie groups, the group definition must be escaped with a
forward slash for commas (and forward slashes).
Pad 1,2
Pad 2,3
Net-tie group "1\,2,2\,3"
Fixes https://gitlab.com/kicad/code/kicad/issues/13001
2023-01-18 14:45:52 -08:00
8f4486752d
Fix build error
2023-01-18 10:20:20 -08:00
7fa15b3fbb
Only update items that can be affected
...
When updating the view, don't force repaint all items. Changing the
line width only affects elements with lines
Fixes https://gitlab.com/kicad/code/kicad/issues/13579
2023-01-18 09:59:00 -08:00
cff0560088
Eagle schematic import: Handling of escaped text
2023-01-18 12:33:36 +00:00
3af9c658e6
Don't specify fonts in wxFormBuilder. It only leads to pain.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-18 12:28:07 +00:00
90c76fa4bc
Pcbnew: display first and last layer ID on buried and micro vias.
...
Fixes #13566
https://gitlab.com/kicad/code/kicad/issues/13566
2023-01-18 09:56:25 +01:00
940d88c47d
PCB_SHAPE::swapData() : Do not swap twice a parameter
...
Fixes #13576
https://gitlab.com/kicad/code/kicad/issues/13576
2023-01-18 08:37:34 +01:00
7844602210
Nullptr safety.
2023-01-18 01:30:40 +00:00
f90b04c715
Nullptr safety. (Sentry KICAD-5N)
2023-01-18 01:05:27 +00:00
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
f35a02d57a
Move early exit higher in netname redraw
...
If the track is outside of the viewbox, GetLOD returns HIDE. This needs
to be handled quickly in the loop before further processing
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-01-17 15:56:04 -08:00
3cc960a872
Push nets to free pads when they're used.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13516
Fixes https://gitlab.com/kicad/code/kicad/issues/13517
2023-01-17 23:29:47 +00:00
1d223d1439
Safely load python plugins
...
Catch potential exceptions when doing the initial python plugin load
Fixes https://gitlab.com/kicad/code/kicad/issues/12231
2023-01-17 12:56:15 -08:00
60ba245474
Remove Eagle islands by default unless told otherwise
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-17 12:49:44 -08:00
26c821962f
Simplify and regularize text variable substitution architecture.
...
EDA_ITEMs are responsible for giving their parent a crack at it if
they failed to resolve it. This recurses all the way up to the schematic/
board, and then to the project.
Cross-reference handling is also move to the EDA_ITEMs. It must be done
before bubbling up so that we don't end up in loops. (The aDepth parameter
will break the loop, but without having done anything useful.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-17 17:05:41 +00:00
9820062c71
Fix clipping issue in Pad Properties dialog.
2023-01-17 17:05:41 +00:00
022c913e8f
Fix another broken graphics import file filter.
2023-01-17 11:34:51 -05:00
369c0efade
Bitmaps: respect source DPI
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13565
2023-01-17 11:20:17 -05:00
f81642bbb3
Fix broken graphics import file filters.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13570
2023-01-17 11:19:53 -05:00
90c5ede1e6
pcbnew: move DIALOG_PAD_PROPERTIES_BASE from dialog_pad_properties to its own files.
...
dialog_pad_properties_base.fbp included to many dialog descriptions.
2023-01-17 09:44:28 +01:00
ac94995f70
Some more wxS
2023-01-16 19:07:50 -05:00
08295c795b
Add vertical justification buttons to pcbnew text dialog
...
kicad 6 default behaviour was not achievable through the UI.
Addresses #13423 and #2375
2023-01-16 18:40:08 +00:00
22497502e6
Don't leave a dummyPad in a group. Freeing it will cause problems.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13556
2023-01-16 17:30:40 +00:00
e490728226
Don't run the footprint checker's shorting pads routine at board level.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13555
2023-01-16 16:44:16 +00:00
c4ccf46cc7
DIALOG_PAD_PRIMITIVES_PROPERTIES: fix incorrect display of polygon primitive.
...
Fixes #13557
https://gitlab.com/kicad/code/kicad/issues/13557
2023-01-16 17:32:22 +01:00
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
62649b868c
Ensure good fonts in grid headers.
...
Also moves rendering to a flat look for headers (instead of a beveled
border).
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-16 02:47:14 +00:00
ca1fb732c8
Share Eagle var substitution between board and schematic importers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-15 22:27:19 +00:00
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
0328cae94c
Detach revert footprint copy from parent board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13537
2023-01-15 17:26:44 +00:00
744fd3a71e
Fix GCC build issue on Linux.
2023-01-15 12:18:56 -05:00
bf4b9ef6e2
Remove sorting by priority before filling.
...
We can't fill lower-priority zones until the higher-priority ones
have been tesselated, and as the tesselation step always gets pushed
to the back of the queue after the fill finishes having them sorted
by priority accomplishes little. (We're also going to push all other
layers of the high-priority zone to the back as the first layer will
have the lock, further degrading the usefulness of sorting.)
2023-01-15 15:52:24 +00:00
0c8f95aa02
Make sure tesselate_lambda has lock before modifying zone.
...
Also implements locking for upating pad & tracks' zoneConnectionCaches.
Fixes https://gitlab.com/kicad/code/kicad/issues/13531
2023-01-15 15:52:24 +00:00
45a71a205c
Don't wait for degenerate zones.
2023-01-15 15:52:24 +00:00
f1aee2fa18
Minor dialog tweaks.
2023-01-14 01:45:30 +00:00
ea4c3a267b
Be more discerning about dirtying zones for auto-refill.
...
In particular, record which children caused a parent footprint to be
added to the commit so we can determine if they have intersecting
bounding boxes and/or layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13512
2023-01-13 19:09:22 +00:00
f358749b28
Import copper pour cutouts from Eagle packages (footprints).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-13 16:35:45 +00:00
761e754294
router: trying to improve the 'guess posture' algorithm to work well with both fix-all and fix-last-segment on click
2023-01-12 23:37:07 +01:00
65def26b4d
router: follow up ROUTER::GetUpdatedItems() API changes in the ROUTER_TOOL
2023-01-12 23:37:07 +01:00
d07d6c9a30
router: fix 'Bowen knot'-looking hulls for 0-length segments
2023-01-12 23:37:07 +01:00
0595440d79
router: minor improvements in shove algorithm handling of vias
2023-01-12 23:37:07 +01:00
213d30cad6
router: workaround for assertion fail on NODE::Add(unique_ptr<LINE>)
2023-01-12 23:37:07 +01:00
aa7271e55a
router: expose the 'head' traces in a separate list for debug logs
2023-01-12 23:37:07 +01:00
79f567cff4
Standardize BOM nomenclature
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13499
2023-01-12 13:54:12 -08:00
631fd54f9f
Don't suppress writing of empty values. They have meaning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13507
2023-01-12 15:24:59 +00:00
595bf70d5d
Do not try to read from UI elements that haven't been initialized yet
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13480
2023-01-12 09:16:22 -05:00
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
1ff1571849
Bring back deprecated net properties to rules system
2023-01-11 22:14:52 -05:00
2654279678
Cleanup zone bbox cache in destructor
2023-01-12 00:21:51 +00:00
248399f771
Standardize print/plot terms
...
Use choice box for color/bw selection
"border and title block" -> "drawing sheet"
Fixes https://gitlab.com/kicad/code/kicad/issues/13128
2023-01-11 12:30:02 -08:00
8238973bf4
Make sure std::unique_ptr gets initialized.
...
(Fixes unit test failure.)
2023-01-11 18:28:29 +00:00
096cc7a5ad
Suppress unflashed annular rings only when copper layer is primary.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13471
2023-01-11 18:15:46 +00:00
c85dcbc4e1
Improve performance of IncrementTimestamp so it can be called at will.
2023-01-11 17:41:08 +00:00
1500e3bb80
Pcbnew, minor fix: do not write twice the dielectric color in stackup section in broad file.
2023-01-11 17:45:00 +01:00
30c9deb9d5
Flat(er) look for paged dialogs.
2023-01-11 01:11:25 +00:00
f153ff8453
Add GetCurrentSelection() python scripting helper
2023-01-10 16:39:48 +00:00
507edc54b3
Fix issues related to footprint wizards not loaded/reloaded in fp editor and fp wizard frame.
...
Fixes #11195
https://gitlab.com/kicad/code/kicad/issues/11195
2023-01-09 19:58:02 +01:00
c3ded7a03d
Remove board editor standard dialog button static line separators.
2023-01-09 08:49:38 -05:00
e916b715d5
Special case for very-short tracks was killing both-ends-in-a-zone.
...
(And doing so randomly as if the closer endpoint to the zone center
was the one without a pad then it would get marked as good, while if
it was the other way around we'd notch 2 connections for the pad end
and none for the other end.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13420
2023-01-09 13:35:54 +00:00
82a1175d72
Fix cli gerbers output path and add job file
2023-01-08 23:03:30 -05:00
6ed90134c7
Check for collisions on common layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13438
2023-01-08 20:53:15 +00:00
f28ea5e784
Remove standard dialog button static line separators.
...
For the sake of consistency across all dialogs and window that behave
like dialogs, remove the static line that separates the main part of
the dialog from the standard buttons. This only applies to windows
that have the standard button on the bottom of the frame.
This covers the 3D viewer, CvPcb, common, GerbView and KiCad dialogs.
2023-01-08 13:15:33 -05:00
ae8bbcad32
PadArray.py: ensure parameters used to create a VECTOR2I are ints.
...
Fixes #13430
https://gitlab.com/kicad/code/kicad/issues/13430
2023-01-08 09:10:13 +01:00
a369fd6a9c
Fix swig optimization flag causing incompatible codegen
2023-01-08 00:55:21 +00:00
1e407e5e20
Minor dialog adjustments.
2023-01-07 23:55:01 +00:00
4794956804
Minor dialog adjustments.
2023-01-07 22:26:43 +00:00
bc50f537ff
Re-layout standard buttons after editing their names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13425
2023-01-07 19:34:32 +00:00
e509fa0fc9
Don't depend on a pad being connected to a non-zone when filling zones.
...
If the pad hasn't already been owned by another zone, and the zone we're
currently filling can connect to it, then we want to try to flash it even
if it's not connected to anything else.
Fixes https://gitlab.com/kicad/code/kicad/issues/13415
2023-01-07 19:34:32 +00:00
a93c83d2fa
Don't count non-coper SMD pads for likely type
...
We are only concerned for connected pads, not apertures
Fixes https://gitlab.com/kicad/code/kicad/issues/13387
2023-01-07 07:14:16 -08:00
94847336a1
Bug fix for dark mode switch for layers palette.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13154
2023-01-06 20:43:33 +00:00
2399759c03
Allow default sexpr libs to have '.' and no .pretty
...
We default to KICAD_SEXPR format. In this case, if the library doesn't
have the .pretty extension, the full directory name including a '.' is
the correct nickname
Fixes https://gitlab.com/kicad/code/kicad/issues/13388
2023-01-06 10:08:32 -08:00
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
25f34a14a1
Check file starting signature when opening
...
Opening .brd files might be legacy or eagle (probably others as well).
We check for the starting "PCBNEW" in KiCad files to differentiate
Fixes https://gitlab.com/kicad/code/kicad/issues/10201
2023-01-05 18:10:22 -08:00
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
Alex
qu1ck
Marek Roszko
Jon Evans
Seth Hillbrand
aris-kimi
Ian McInerney
jean-pierre charras
Mike Williams
Jeff Young
Wayne Stambaugh
Kliment
Roberto Fernandez Bautista
Chris Morgan
vinsfortunato
Simon Richter
Dag Lem
Felix Schneider
Tomasz Wlostowski