This introduces a new util function in geometry_utils which snaps a vector
to axes or 45 degree lines. This can be used whenever you want to
snap a vector to these angles, but still want it to stay on a grid.
This snapping is used for the dimension tool and the ruler tool.
This is substantially simpler for two-point tools that the method
used by the line tool, which uses DIRECTION_45.
Fixes: lp:1780826
https://bugs.launchpad.net/kicad/+bug/1780826
Also includes a bunch of changes to simplifiy the terminology
and unify the copper, non-copper and keepout versions.
Also removes some legacy features:
Removes contol for fill method. If the fill method is currently
segments the dialog will ask if you want to convert to polygons
on OK.
Removes control of boundary resolution. We've done this with trig
since 5.0.
(cherry picked from commit 487aaeb)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
This not only reduces the number of different mechanisms, but
will also reduce (yet again) the number of Clarify Selection
pop-ups (because the CLIENT_SELECTION_FILTER runs before the
pop-up, while SanitizePads ran after it).
Fixes: lp:1710451
* https://bugs.launchpad.net/kicad/+bug/1710451
(cherry picked from commit e50a993)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
The local ratsnest needs to be able to hide as well as show visibility.
Clicking a module will toggle the visibility while clicking off all
modules clears the local ratsnest display.
Fixes: lp:1531332
* https://bugs.launchpad.net/kicad/+bug/1531332
The assert in the title line verifies that an item does not belong to
any DLIST when it is being added to one. Items in clipboard are already
owned by DLISTs, therefore they need to be removed from the original
DLISTs before being added to new ones.
Commit 72b49acc changed behavior of MODULE::ViewBBox(),
which now includes text fields area. This caused problems
with selecting footprints with relatively large text fields.
This patch fixes this problem by using MODULE::GetBoundingBox instead.
Fixes: lp:1776942
* https://bugs.launchpad.net/kicad/+bug/1776942
There's no risk in measuring an empty footprint but there's no benefit
either. This matches the measure tool to the other, deactivated
footprint tools.
- fixed via bounding box calculation in TRACK::GetBoundingBox()
- moved clearance to TRACK::ViewBBox()
- modified the Selection Tool to use EDA_ITEM::GetBoundingBox() rather
than VIEW_ITEM::ViewBBox() to determine selection
Fixes: lp:1776314
* https://bugs.launchpad.net/kicad/+bug/1776314
New items just being placed on the board are still temporary. Although
we can modify their orientations/positions, we can't stage these changes
for undo/redo without corrupting the undo stack.
Fixes: lp:1776312
* https://bugs.launchpad.net/kicad/+bug/1776312
Previously, the "Select Connection" sub-items were greyed out when the
selection contained both tracks and vias. This meant that you couldn't
access "Select Copper Connection" when the selection contained both
tracks and vias (though the keyboard shortcuts did work).
Change to use SELECTION_CONDITIONS::OnlyTypes( GENERAL_COLLECTOR::Tracks
) to allow any combination of track elements to be selected.
Fixes: lp:1772249
* https://bugs.launchpad.net/kicad/+bug/1772249
A perfect solution would create holes in the coverage map
for the zone edges and handles, but that's a lot more
work.
Fixes: lp:1773204
* https://bugs.launchpad.net/kicad/+bug/1773204
The SELECTION is a std::set. Numerical dereference of item n is O(n) as
the iterator is not random access. Therefore, a for loop using
numerical dereference is O(n!) and quickly slows.
We avoid this by storing items to remove separately while iterating and
then removing the items after we complete.
Fixes: lp:1692081
* https://bugs.launchpad.net/kicad/+bug/1692081
If you select a track with many segments (e.g. a length-tuned track) and
then select all connected items again ('U' -> 'U'), we would iterate
over all items in the selection and mark connections for each of the n
segments n separate times.
We avoid this by using the marked flag to show when the segment has
already been visited by the routine. This means that if the segment has
been checked for connections because it was connected to the previous
item, it won't be checked for connections again. However, a selection
that interleaves items from multiple connection segments will still
(potentially) be multiply checked as the BUSY flag is cleared each time
there is one not-BUSY track in the selection.
Circles are defined by center and a point on their edge. This requires
the user to do extra math to figure out the size of the circle. The
patch allows the user to edit and draw circles using radial coordinates.
This allows the user to selectively disable the snap-to behavior when
placing stand-alone vias. Full solution will require an update to the
segment distance calculation that takes into account the rounded line
caps.
Fixes: lp:1769523
* https://bugs.launchpad.net/kicad/+bug/1769523
Also fixes a bug where a FOOTPRINT_EDIT_FRAME was being passed
in to a PCB_EDIT_FRAME.
Also tidies up Modedit settings handling for settings which can't
be edited in Modedit's preferences dialog. They're now copied
from Pcbnew.
Fixes: lp:1768477
* https://bugs.launchpad.net/kicad/+bug/1768477
Duplicate already works, so there's little reason to disallow
using the zone dialog to do it.
The legacy canvas can't be fixed because we'll immediately
union the two zones, resulting in a no-op.
Fixes: lp:1464677
* https://bugs.launchpad.net/kicad/+bug/1464677
This really needs to get put into the VIEW_CONTROLS for all the
tools, but that's probably a bit too risky for 5.0 at this
point.
Fixes: lp:1766547
* https://bugs.launchpad.net/kicad/+bug/1766547
If the initial pad was a custom pad converted in a usual pad + graphic items by the command:
"Explode Pad to Graphic Shapes"
the "old" primitives were not cleaned, and the new created pad contained these old primitives, regardless the new selected shapes.
(Usual case when a user want to edit a custom shape)
When multiple cut commands were issued, the cut command handler would
restart multiple times and keep running until the handler that was
invoked first finishes. As all handlers kept a selection copy, they
would try to save the deleted items to the clipboard resulting in a
crash.
Fixes: lp:1761221
* https://bugs.launchpad.net/kicad/+bug/1761221
Previous implementation refilled zones every time they have been
unselected. This patch adds a flag that tracks whether the
zone has been actually modified, so it will be refilled only when
necessary.
Fixes: lp:1760903
* https://bugs.launchpad.net/kicad/+bug/1760903
- vias were always left selected, include vias in tracks filter - as in legacy
- make text filtering work
- cleanup drawings filtering code
- hide checkbox "Include items on invisible layers" because it does not work in GAL
CTRL+{X,C,V} used to be handled both by the legacy hotkey system that
generated ID_EDIT_{CUT,COPY,PASTE} wxCommandEvent, and the Tool Framework
hotkey system.
Fixes: lp:1749549
* https://bugs.launchpad.net/kicad/+bug/1749549
When aligning module centers, it can be hard to determine which item
will be chosen for the alignment target when it chooses based on the
median of the center values. Instead, this patch chooses the alignment
target as the top and left most items of the Y and X centering,
respectively
When aligning in pcbnew, check for pad/module locks before performing a
move and query the user.
When aligning on pads, don't move the pad without moving the footprint,
so we don't break footprints.
Fixes: lp:1751352
* https://bugs.launchpad.net/kicad/+bug/1751352
reimplement the centerpoint distribution and use it when the items to be
distributed overlap leaving no gap to use for spacing
Fixes: lp:1748763
* https://bugs.launchpad.net/kicad/+bug/1748763
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
NEW: add new align icons based on the existing align_items.svg icon, just flipped and rotated
CHANGED: change the context menu to use the new align icons
Tools preserve their state between runs, so it could happen that
activating a tool restores the state when autopanning is enabled, even
though it should not be.
Commit complementary to 4f0c9b6b. In case there were multiple tracks
under the cursor, disambiguation was shown twice because
SELECTION_TOOL::selectConnection() cleared the selection and requested
it again.
Also adds Cancel context menu items for Place Footprint,
Place Target, Place Drill Origin and Place Grid Origin tools,
as well as the standard Zoom and Grid choices.
Removes the Paste context menu item from the Place Drill
and Place Grid Origin tools.
Fixes: lp:1568396
* https://bugs.launchpad.net/kicad/+bug/1568396
Second disambiguation menu was caused by another call to
SELECTION_TOOL::RequestSelection() meant to get the list of
connected tracks. When there were only footprints under the cursor,
it asked the user again to pick an item to remove.
Fixes: lp:1748521
* https://bugs.launchpad.net/kicad/+bug/1748521
This changes the distribute horizonally and vertically tools to place
items with constant gaps between them. The previous implementation put
item centers evenly apart but thereby ignored the relative width and
height of the items (i.e. wide items appeared closer together than
narrow items).
Fixes lp;1745366
https://bugs.launchpad.net/kicad/+bug/1745366
Using footprint rects instead of the larger bounding box means that
reference and value texts no longer influence the positioning of the
footprint in unexpected ways. Treatment of non-module items is
unchanged.
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
The undo/redo operations are essentially the same as for
UR_CHANGED: we store both the origin marker item and a copy
of it and flip back and forth between the two. This also
required the implementation of clone() for the markers.
The ORIGIN_VIEWMARKER is moved from being a subclass of
EDA_ITEM to BOARD_ITEM to facilitate the use of a UR_CHANGE-
like implementation without having to know the internals
of the ORIGIN_VIEWMARKER.
In the command processors, the setting of the origins is
broken into two parts: one for UI-level access which includes
setting up undo, and one for low-level access which does not.
The undo/redo code itself of course uses the lower level.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
This commit also adds a no-selection-mode, which allows the user
to specify what gets update (through the various match modes).
The no-selection-mode is accessed via the Edit menu, although
it could also be applied to the context menu.
Fixes: lp:1466857
* https://bugs.launchpad.net/kicad/+bug/1466857
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
Fix also option tool "show footprint texts in outline mode" code,
but because there is no code to show texts in outline mode in GAL canvas, this option still works only in legacy canvas
When a rotation/flip command was issued when a newly placed text
was hovering over an existing item - the item underneath would be
affected by the command and the new text would be discarded.
Fixes: lp:1744152
* https://bugs.launchpad.net/kicad/+bug/1744152
Some actions, such as select trivial connection, don't need the
user to choose which trace at a corner to start from -- either
one will do. Same for moving a simple trace corner.
Likewise, Edit in Footprint Editor shouldn't ask if you mean the
footprint or the pad. Obviously it's the footprint.
This change adds a CLIENT_SELECTION_FILTER which allows clients
to do tool- or action-specific filtering of the selection before
the disambiguation menu is run.
It also removes some tool- and action-specific code which was
in the selection_tool and shouldn't have been.
Fixes: lp:1708869
* https://bugs.launchpad.net/kicad/+bug/1708869
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
This patch adds functionality to the Pcbnew draw tool to show the dx and
dy of the current segment being drawn if the relative origin (pressing
spacebar) is not already set (i.e. if those coordinates are ( 0, 0 ) ).
You can set the relative origin while using the draw tool by pressing
spacebar. The relative origin is reset on exit of the tool.
fixes: lp:1736133
* https://bugs.launchpad.net/kicad/+bug/1736133
Improved the selection heuristics to keep footprints in the
disambiguation menu when they contain pads with high pad-to-footprint
area ratio.
In other words: make it possible to select a footprint when
most of its area is taken by a pad. Previously pads were given the
priority, so it was very tricky to select the parent footprint.
Fixes: lp:1739425
* https://bugs.launchpad.net/kicad/+bug/1739425
To avoid situations when a large footprint covering most of the board
area (e.g. shield connector) is always selected, even when user clicks
in a seemingly empty spot, a simple filter has been added. In case
the footprint area covers more than 90% of the view area, the large
footprint is not selected. This way large footprints do not disturb
editing when the zoom is high enough.
Fixes: lp:1636214
* https://bugs.launchpad.net/kicad/+bug/1636214
Module placer did not mark the newly placed modules as selected,
but all edit functions (rotate/place/etc.) rely on getting a selected
item. When a rotation/flip command was issued, the newly placed module
was dropped and the one underneath the cursor has been rotated.
To fix this the newly placed modules are marked as selected.
It also simplifies the placer code a bit.
Fixes: lp:1738148
* https://bugs.launchpad.net/kicad/+bug/1738148
If the object changes between a TA_CONTEXT_MENU_UPDATE
event and a TA_CONTEXT_MENU_CHOICE event (usually as
a result of a cancel), the old code would leave the
last item hidden.
Fixes: lp:1737562
* https://bugs.launchpad.net/kicad/+bug/1737562
Opening Properties dialog normally does not ask the user to confirm the
action, even for locked items. The exception was a case when there was
nothing selected and Properties dialog was invoked via its hot key -
then SELECTION_TOOL::RequestSelection() tried to get the item under the
cursor, verifying the lock flag.
Fixes: lp:1734537
* https://bugs.launchpad.net/kicad/+bug/1734537
A change in commit 5731000135 caused kicad to stop allowing users
to move items like footprints, arcs and lines using anchors other
than the center point.
This was caused by the new code that stores reference points for
clipboard pasting, a call to updateModificationPoint() prevented
some old code paths from executing, which caused the selection to
snap into the cursor, always using the center anchor.
This fix moves the call within the if-cases that need it, and adds
a ClearReferencePoint call when the selection is "dropped" to allow
the user to grab the same selection again from a different anchor.
Fixes: lp:1722512
* https://bugs.launchpad.net/kicad/+bug/1722512
- renamed connectivity.[h|cpp] to connectivity_data [.h|.cpp] so that the file name matches the main class name.
- GetNetItems() now returns a vector instead of a list
SHAPE_POLY_SET: fix crash in VertexCount when it is a empty poly set, or when params are incorrect.
minor other fixes:
warning in degug mode in dialog_dxf_import_base.cpp
pcb_painter.cpp: remove a useless debug line.
- fixed netcode propagation bug
- factored out EDIT_TOOL::m_offset, now selection offset is stored in SELECTION class
- added VECTOR2I-based Move/Flip/Rotate methods in BOARD_ITEM
- added selection of reference point
- added snapping when pasting
- some minor code refactoring
- disabled pasting between footprint and pcb editors due to model incompatibility
-Can paste items from board to module-editor (only module parts)
-Can paste entire modules just as copy
-Can copy items inside module-editor
Known limitations:
-Will crash if trying to paste a module containing module_text inside
the module editor ( dont know why, problem existed before )
-If copying things with strange layer names, the layer names will be
changed.
Now the heirarchical sheet selection feature includes tracks that belong
to a net spanning multiple sheets, but only by doing a logical connection
from the pads of the modules. This is to be able to select connections
between components on the same sheet. For example if the sheet contains a
star power connection or something similar, then most of the sheet local
connections will now also be included.
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
Jeff Young
Tomasz Wlostowski
Maciej Suminski
John Beard
jean-pierre charras
Carsten Schoenert
Seth Hillbrand
Andrzej Wolski
Jon Evans
Robbert Lagerweij
Wayne Stambaugh
Michael
Camille
Jose I Romero
Marvin Schmidt
Kristoffer Ödmark
Oliver Walters
Baranovskiy Konstantin
Michael Geselbracht