This not only reduces the number of different mechanisms, but
will also reduce (yet again) the number of Clarify Selection
pop-ups (because the CLIENT_SELECTION_FILTER runs before the
pop-up, while SanitizePads ran after it).
Fixes: lp:1710451
* https://bugs.launchpad.net/kicad/+bug/1710451
(cherry picked from commit e50a993)
All calls to {save,apply}ViewControls() have been replaced with a new
method: setActiveState(). The advantage is that setActiveState() always
saves view controls settings to the tool that set them. As long
as setActiveState() is called every time there is a tool context
switch, the changes are kept up-to-date.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Second disambiguation menu was caused by another call to
SELECTION_TOOL::RequestSelection() meant to get the list of
connected tracks. When there were only footprints under the cursor,
it asked the user again to pick an item to remove.
Fixes: lp:1748521
* https://bugs.launchpad.net/kicad/+bug/1748521
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
It fixes the case when a tool sets up a menu and starts its event loop
waiting exclusively for menu events. If none arrived, the tool was stuck
in the loop forever.
Fixes: lp:1744915
* https://bugs.launchpad.net/kicad/+bug/1744915
Opening Properties dialog normally does not ask the user to confirm the
action, even for locked items. The exception was a case when there was
nothing selected and Properties dialog was invoked via its hot key -
then SELECTION_TOOL::RequestSelection() tried to get the item under the
cursor, verifying the lock flag.
Fixes: lp:1734537
* https://bugs.launchpad.net/kicad/+bug/1734537
- added selection of reference point
- added snapping when pasting
- some minor code refactoring
- disabled pasting between footprint and pcb editors due to model incompatibility
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
This patch adds a radiobox to allow the user to select a reference point for
the move. The additional options are: User Origin (set with <space>),
Grid Origin and Sheet Origin (effectively making it an absolute coordinate).
A checkbox is added (where it makes sense) to allow overriding which point
within the component is put on top of the designated coordinate.
Fixes: lp:1460460
* https://bugs.launchpad.net/kicad/+bug/1460460
A new items is added to the GAL display options (and the dialog), and a
hotkey (Ctrl+Shift+x) is added to toggle it.
Fixes: lp:1673633
* https://bugs.launchpad.net/kicad/+bug/1673633
This is the right implementation of the commit b25ded4d.
Previously if there were tools launched from another tool,
the settings could be stored in a wrong TOOL_STATE object.
- The tools can now specify if the items in the selection must be editable/
deletable. This is groundwork to be able to select/delete DRC markers, which can't
otherwise be edited.
- Fixed disappearing of selected objects
BOARD::GetBoundingBox() now directly calls BOARD::ComputeBoundingBox()
and there is a new method BOARD::GetBoardEdgesBoundingBox() used for
call sites that needed to use ComputeBoundingBox( true ) in the past.
This allows COMMON_TOOLS to implement ZoomFitScreen without knowledge
of the BOARD class.
Adds a similar crossprobe as modules has in pcbnew. When clicking a
sheet in eeschema, the items that are exclusive in that scheet will be
selected in pcbnew if using the GAL canvas.
There are times, when TOOL_MANAGER has to force cursor position
to make tools work as expected (e.g. when popping up a menu,
so tools get the right click position instead of current position
pointing to an entry in the menu).
If another tool is invoked, VIEW_CONTROLS settings have to be stored
in the TOOL_STATE object. In such case, it is necessary to revert the
force cursor setting when saving VIEW_CONTROLS settings.
Fixes: lp:1668712
* https://bugs.launchpad.net/kicad/+bug/1668712
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
dispatchContextMenu() stores the cursor position before displaying a
menu, so the tools use the original cursor position when processing
events (instead of the mouse position pointing to a menu entry). Later,
the previous position has to be restored, but if in the meantime the
tool was cancelled - previous settings were restored to a wrong tool.
This is used to provide menu entries that allows cancellation of
interactive drawing and routing tools without needing the keyboard.
It is provided in the drawing tools and the router tool.
The cancel event doesn't have any new functionality (e.g. track rip-up
for the PNS router - lp:1448460), this just adds it to the menu, where
it behaves the same as an Escape keypress.
Some grid/zoom tools are left in PCBNEW_CONTROL because they currently
depend on Pcbnew-specific class members. Once refactoring is done to
make it possible to use all zoom and grid controls outside of pcbnew,
these last tools can be moved to common to match their ACTIONs.
New virtual class ACTIONS is added as a member to EDA_DRAW_FRAME so
that the TOOL_DISPATCHER can have access to the appropriate derived
version of TranslateLegacyId()
The apply settings and push settings options now take account of the
validity of the global pad settings when deciding whether to show or
not.
Global pad push now requires a source pad and doesn't push from the
global pad setting when there is no selection.
The whole submenu is hidden when there are no enabled items.
Fixes: lp:1664016
* https://bugs.launchpad.net/kicad/+bug/1664016
When creating a copy of CONTEXT_MENU, always a CONTEXT_MENU instance was
constructed, whereas an inherited type should be used. Solved with
CONTEXT_MENU::create() that has to be overridden in inheriting classes.
Event & update handlers are now virtual functions, instead of setting
the handlers with Set{Event,Update}Handler().
Event handlers are (dis)connected depending on the active view.
TOOL_DISPATCHER inherits from wxEvtHandler, so now it receives events directly instead of being fed by external handlers.
Refactored code that handled zooming events.
Added PCB_RENDER_SETTINGS::Get/SetSketchMode().
PCBNEW_CONTROL reacts to hot keys changing display modes (sketch via/tracks, high contrast).
TOOL_EVENT message is supposed to contain string as parameter.
Added missing header for class_drawsegment.h (KiROUND).
Renamed SELECTION_TOOL::containsSelected() to SELECTION_TOOL::selectionContains().
Added REASON enum for Reset() function, so tools will know why a reset occured.
Fixed SELECTION_TOOL (it was bailing out, when a new board was loaded and some items were still selected).
Added removal of VIEW_ITEM groups after changing layers and removing items.
TOOL_ACTIONs can be run from CONTEXT_MENU after adding them.
Move tool actions are available to be run from CONTEXT_MENU displayed after right mouse button click on selected items.
Added some asserts to check the code.
Jeff Young
Carsten Schoenert
jean-pierre charras
Maciej Suminski
Tomasz Włostowski
Camille
Mark Roszko
Marvin Schmidt
Jon Evans
Robbert Lagerweij
John Beard
Kristoffer Ödmark
Simon Richter
decimad
Andrew Zonenberg
Andrew Zonenberg
Mikhail Karpenko
Povilas Kanapickas
tomasz.