* Add footprint and drop table from the Pcbnew footprint library table menu
entry to make it clear to new users.
* Add component to the Eeschema library configuration menu entry.
legacy plugin: better compatibility with old brd files (current track width and current vias size, stored in SETUP section, were not read from file and incorrectly set)
Eeschema now uses dashed lines for graphic lines (to be consistent with plot functions and toolbal icon).
Fix an old bug in some envionments which warp the mouse on a bad monitor when opening eeschema, pcbnew and some other windows, only noticeable guys who are lucky enough to have more than one monitor.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
* move not shared files (sch_item_struct.*, sch_base_frame.h) to eeschema;
* move wxEeschemaStruct.h to eeschema and rename it schframe.h to be consistent with the other corresponding file name schframe.cpp;
* remove few not needed #include
Rename eeschema/dialogs/dialog_sch_find.fbp to dialog_schematic_find_base.fbp, to be consistent with other dialogs.
Pcbnew run from the project manager: add menu Save Copy As..., which is the same command as Save As ... in stand alone mode, but with the constraints of a project (no cwd change, no board filename change, and keep project settings)
- the net file now has all project sheet title block using node 'sheets' and 'sheet'
- Updated bom_with_title_block_2_csv. Note, its only going to output the root title block.
- corrected the code that violated the code policy. i.e. added the extra space to make the code more readable
- Restored bom2csv.xsl to its original form
- Added bom_with_title_block_2_csv.xsl which has the new BOM generator.
For example:
- Company name
- Project title
- issue date
- Revision
- Comment 1 to 4
- updated bom2csv.xsl plugin to take advatage of the extra project information that the net file now outputs.
Overall this improvement will make it easier to automatically make controlled and traceable documents.
* Fix -Woverloaded-virtual warning in DIALOG_LIB_NEW_COMPONENT class
definition.
* Make EDA_ITEM::Matches( const wxString& wxFindReplaceData& ) protected
since it's a helper function that should only be called by derived objects.
* Check to see if image handler is already initialized to prevent warning
on debug builds.
* Change LIB_PART destructor message output to use wxLogDebug for debugging
on windows builds.
* Minor code cleaning and coding policy fixes.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
* Make generate button the default in Eeschema netlist dialog.
* Fix spacing issues in export IDF dialog.
* Make OK button the default in export IDF dialog.
* Remove unnecessary end dialog code from export IDF dialog.
* Improve resizing of export IDF dialog.
* Change Read to Load in Pcbnew and Eeschema preference menus.
* Make electrical rules check status bar message the same for both the menu
and toolbar entries.
When the filename is not absolute, the page layout file is now searched first in project folder, and then in kicad template folder, if not found in project.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
BOM dialog: remove a not very useful button, and merge its function with an other (not perfect, need more work)
Add message box to show info added in BOM python scripts (See scripts/bom-in-python/README-bom.txt about this info)
* Make title capitalization consistant.
* Replace some instances of module with footprint.
* Use angle instead of orientation where appropriate.
* Remove abbreviations where it made sense.
* Coding policy fixes.
* Fix assertions in Eeschema when editing net labels, electronic rules check,
and plotting.
* Fix assertion when opening PCB calculator.
* Fix assertions in Pcbnew when changing footprints in footprint properties
dialog and adding or editing text.
steps to better support devices with precise scrolling deltas (trackpads).
Scrolling is done in the handler rather than creating and firing cmd events.
This is intended to support two-finger scrolling on the Magic Trackpad.
- Added a preference, 'Use mousewheel to pan', to allow panning by default
on mousewheel events. This reverses the existing behavior where unmodified
mousewheel zooms and Shift/Cmd modified pans.
The old behavior was:
- Unmodified scrollwheel performed zoom in/out
- Shift modified scrollwheel performed pan up/down
- Cmd modified scrollwheel performed pan left/right
- Shift+Cmd modified scrollwheel performed zoom in/out
with no cursor warp
With the new preference checked, this changes to:
- Unmodified scrollwheel performs pan up/down
- Shift modified scrollwheel performs pan left/right
- Cmd modified scrollwheel performs zoom in/out
- Shift+Cmd modified scrollwheel performs zoom in/out
with no cursor warp
With the preference unchecked, this is now:
- Unmodified scrollwheel performed zoom in/out
- Shift modified scrollwheel performed pan left/right
- Cmd modified scrollwheel performed pan up/down
- Shift+Cmd modified scrollwheel performed zoom in/out
with no cursor warp
It should be noted that for the last case, the behavior has changed.
This is not arbitrary. This now matches expected behavior for an OS X
application. This also matches what wxWidgets expects on this platform
as wxWidgets changes the axis of mousewheel events to horizontal when
the event is shift-modified.
The preference is added everwhere that mouse preferences previously
existed, i.e., eeschema, pcbnew and gerbview. The 3D Viewer does
not yet honor this preference, but behaves as if it was checked.
The pl_editor does not currently have any preferences to honor.
As with the magnify event support, this covers canvases for all
current tools, EDA_DRAW_PANEL, EDA_3D_CANVAS and EDA_DRAW_PANEL_GAL.
This does NOT modify the behavior of mousewheel zooming, though it
probably should. This remains unsuitable for use with a trackpad,
use pinch-to-zoom instead.
* Make all files generated by make_lexer() dependencies of thier respective build targets.
* Make building Boost a dependency for all libraries.
* Remove duplicate make_lexer() call for Specctra lexer files.
Rename "Switch highcontrast" to "Toggle High Contrast".
Eliminate most of the abbreviated hotkey titles.
Doxygenize dialog_hotkeys_editor.h and add missing license block.
Display <unassigned> if key code is 0 (NULL).
Refactor hotkey editor to use tab control instead of one giant list.
Each tab is a separate hotkey section.
Modify EDA_HOTKEY_CONFIG to change the m_Comment member to m_Title for a new purpose.
We want a pretty title in the hotkey editor. We use m_Title for the key export comment which
still conveys the purpose just as easily.
Refactored usage of wxGrid into wxListCtrl which allows capturing navigation characters
and also works better (single selection is built in).
Add hotkey overwrite prompts that are paired with "Common" section. It will check if a hotkey
overlaps with the proper sections. i.e. Common with the all other sections; or Section 1 with just Common.
Right-click menu removed due to wxListCtrl being able to catch the special keys properly.
* Include new field template editor
- Removes 10 template limitation
- Adds ability to set default value
- Adds ability to set default visibility
* Documentation to follow
* Tested in Linux (Ubuntu 14.04) + Windows, Windows has issue with displaying highlight for selected template, fix to follow
* Use the proper verb Annotate in the Annotate dialog for the action button
* Used the proper verb Generate in the Netlist dialog for the action button
* Fix ERC dialog title to be "Electrical Rules Checker".
* Fix all usages of "Erc" to "ERC" consistently in ERC dialog.
* Move action buttons to bottom of ERC dialog and change Del Markers to
Delete Markers.
* Add tooltips to ERC options matrix buttons to indicate their current state.
* Cleanup ERC options code that for some reason decided to delete the button
and recreate it instead of just updating it's bitmap directly.
* Rename "Test ERC" to "Run" to describe what it's actually doing properly
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
Fix dialog title to be "Electrical Rules Checker" to match everywhere else.
Fix all usages of "Erc" to "ERC" consistently.
Move action buttons to bottom of dialog, make Del Markers actually say Delete Markers.
Add tooltips to ERC options matrix buttons to indicate what their current state is, for newb friendliness.
Cleanup ERC options code that for some reason decided to delete the button and recreate it instead of just updating it's bitmap directly.
Rename "Test Erc" to "Run" because you are running ERC and not testing it.
Fix improper usage of SetLabel on a wxTextCtrl instead of SetValue so the ERC totals now work!
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
Schematic component properties dialog: add 2 helper buttons to manage the chip name (name of the corresponding part in lib)
- a browse button to chose an other chip name
- a test button, to know if the part exists. If not existing, list the parts found when searching using a case insensitive comparison.
However to be compatible with old versions of Eeschema, when a search in library fails, a case insensitive search is made.
Therefore, this version should be compatible with sch files created by previous Eeschema versions compiled with KICAD_KEEPCASE = OFF
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
* Fix Eeschema back annotation bug where footprint field visibility setting was ignored.
* Replace two confusing and ambiguous dialogs with a simple single choice dialog.
Ensure some values initialized by the schematic editor and used by libedit are also initialized in libedit even if the schematic editor was not started.
Remove useless commands (save/load project config) in libedit, because now they have no sense.
This fixes Bug #1360219 (Lost settings in eeschema) and keep separation between code relative to lib management and code relative to preferences.
2 or 3 minor settings could be lost in some designs, but they are very easy to reenter.
* Refresh canvas when user cancels edits so that the discarded sheet is
cleared from the schematic.
* Add file name validation to the sheet properties dialog to prevent
illegal file name characters from being entered into the text control.
* Rename FOOTPRINT_NAME_VALIDATOR to FILE_NAME_CHAR_VALIDATOR for clarity.
* Use clockwise and counterclockwise in menu strings which is less ambiguous than + and -.
* Moved the rotate hot key R to the rotate clockwise menu entry string.
* Patch Boost interlocked.hpp from version 1.56.
* Fix segfault in Eeschema when auto save event occurs before root sheet is initialized.
* Add assertion when SCH_SHEET_PATH::BuildSheetList is called with NULL pointer.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
2) LIB_RECTANGLE and related classes sscanf data read from a file using "%s"
without field limits, which can cause problems with malformed/really long
inputs.
3) If some of the optional fields in a lib line are missing, "tmp" can remain
uninitialized.
Remove a minor warning message in Debug mode for 2 dialogs.
Pcbnew: update Gerber X2 file format (File Attribute) to very last X2 specification
Eeschema: Fix a minor bug in block selection (sometimes the last selected component was select instead of items in selected area)
and better drag behavior when draging an item by the drag hotkey.
Also fix incorrect backannotation when footprint names contain spaces (put spaces in names is always a bad idea)
* Fix minor Bug #1349058 Choose component dialog: Search field loses focus after entering a character and internationalize the dialog.
* Fix a subtle bug which prevent eeschema to read the project config file when launched from kicad manager, and when kicad.pro is not found.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
Change class PROJECT to use a generalized wxString in place of the
RETAINED_PATH items, so that new session and project specific strings
of any purpose can be saved there, for the life of a session.
Fix ( workaround only) crash (Windows only) when a quasi modal frame (like footprint viewer) was called from a dialog (like the component properties dialog in schematic editor).
Very minor other fixes.
- Better shape to the 60617 pin markers
- Made the markers' size proportional to the pin text
- Added the missing implementation in the pin plot routines
*) Eeschema can now show the footprint editor.
*) Eeschema can now invoke the footprint picker from the library part field editor.
*) KIWAY_PLAYER::ShowModal() takes aResultantFocusWindow that tells what window
to give the focus to. Required since frames are often near the top of the
hierarchy and they are invoked by a peer, not a parent.
*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()
*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.
*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
See top of dialog_shim.cpp about that for benefits and need.
*) You can now pick footprint from the schematic component field dialog, although
if you do this before you open the BOARD, you will only get the global footprint
libraries, not also the project specific ones. Opening the BOARD first avoids this
problem.
This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.
A fix for this will be coming in a few days.
However it mostly starts to show why the KIWAY is terribly useful and important.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
SVG plot, fix a missing reinitialization in plot lines, which could define a filled polyline, instead of a simple polyline
(these fixes solve Bug #1313084 )
*) void KIWAY::ExpressMail( FRAME_T aDestination, MAIL_T aCommand, const std::string& aPayload, wxWindow* aSource=NULL );
*) virtual void KiwayMailIn( KIWAY_EXPRESS& aEvent );
*) enum MAIL_T expansion into the brave new world if cross KIWAY_PLAYER communications.
Let the KIWAY_PLAYING begin.....
through well conceived mail from one KIWAY_PLAYER to another.
Get thinking now. Add a new MAIL_T value, then send ExpressMail(),
and receive it in KiwayMailIn(), it's that easy.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
* getpart.cpp: fix a potential bug on a translatable string with has requirements in spelling.
* fix bug #1066179
* kicad: fix erroneous labels in sub menus.
* Pressing 'Enter' while the focus is in the tree did not work due to the
double-click wxWidgets workaround. Make it work.
* More clearly document what is happening and how it can be tested.
* Fix string concatenation for _( "Unit" ) + wxT( " " ). This failed
compiling against wxWidgets 2.8 (thanks Cirilo Bernardo ).
* Base the indentation on a measured observation with explanation
(98%-ile of name-length found in library). The previously chosen 24
character indentation was too wide for most.
* Don't use a #define spilling into the global namespace, but use
a locally defined constant for COLUMN_DESCR_POS.
* Manually change fbp file minor version number so dialog could be edited
with latest release version of wxFormBuilder.
* Give component view panel more weight for improved component view size.
* Add padding around dialog button sizer.
* Improve component chooser redraw to fit in wxWidgets redraw strategies.
* Use LIB_COMPONENT::Draw and LIB_COMPONENT::GetBoundingBox for drawing the
component
* Make resize redrawing work properly.
* Allow to select units in components that have more than one right in the
component chooser dialog.
* Keep chosen unit in history.
* Show preview of current component unit as thumbnail image next to the
description box.
* Fixes lp:1280567
* make some more fields 'const' that can.
* Instead of previous/next _visible_ element, Go through
previous and next element. Otherwise the cursor stops moving
if the item is only partially visible.
Add a workaround to fix a new bug in wxWidgets 3.0 ( Windows specific ) which shows icons only with a size = 16x16 in menus which have attribute wxITEM_CHECK
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame.
The desire is to migrate designs *away from* case independence, and to create
designs which use literally (case specific) interpreted component names. But for
backwards compatibility, you may turn OFF this option if you really must.
(Remember that with KiCad using text data files, typically you would be better
off simply doctoring those files into a case literal state with a text editor
and move forward into the brave new world of case specificity. Also, BOM
generators may not work properly when you have this option turned OFF, the xml
export's referential integrity is broken on library part name. Hence the default
is ON now, as of 29-Jan-2014.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
unknown
Maciej Suminski
Wayne Stambaugh
unknown
jean-pierre charras
https://launchpad.net/~john-j-beard
unknown
Garth Corral
Tomasz Wlostowski
Ronald Sousa
John Beard
Alexander Golubev
Blair Bonnett
Dick Hollenbeck
unknown
Bernhard Stegmaier
Brian Sidebotham
Lorenzo Marcantonio
Andrew Zonenberg
marco.
Marco Serantoni
Fabrizio Tappero
HennerZeller
Cirilo Bernardo
maciej.