Commit Graph

1880 Commits

Author SHA1 Message Date
James Turton e453740aca rp: Increase spinner timeout to 500ms
Increasing spinner timeout to 500 means `tc_printf` is not called during
the `_flash_range_erase`. This is important as `_flash_range_erase` is
used when loading. This fixes the issue:
https://github.com/blacksphere/blackmagic/issues/875
Also adding spinner timeout counter to reduce bus traffic.
2021-05-16 11:26:14 +02:00
James Turton 67c9003522 rp: Flush cache after erase and write
The RP2040 datasheet suggests that _flash_flush_cache and _flash_enter_cmd_xip
should be called after erasing and writing to flash.
2021-05-16 11:26:14 +02:00
James Turton f880734050 Fix compiling for native probe 2021-05-16 11:26:14 +02:00
Uwe Bonnes e4421799ba More header cleanup 2021-05-15 12:54:51 +02:00
Uwe Bonnes 8e438b9e5f Add missing headers and remove double typedef. 2021-05-14 19:58:16 +02:00
Uwe Bonnes cfbe9f1c94 pc/gdb_if.c: More verbosity for Error messages #873
Thanks to "pshri" for dissecting and adding messages, as  problems with
Hpyer-V and port permissions happened on Win10
2021-05-09 11:49:32 +02:00
UweBonnes 8089e05a00
Merge pull request #871 from zyp/cmsis_dap
CMSIS-DAP improvements
2021-04-30 13:06:49 +02:00
Vegard Storheil Eriksen f121350fc9 hosted/cmsis_dap: Verify that a v2 interface has endpoints. 2021-04-27 11:39:43 +02:00
Vegard Storheil Eriksen 494524dd85 hosted/cmsis_dap: Add v2 support. 2021-04-27 10:26:06 +02:00
Vegard Storheil Eriksen 4f52a7b235 hosted/cmsis_dap: Add discovery by interface string and prepare for v2 support. 2021-04-26 21:56:24 +02:00
Vegard Storheil Eriksen c4874fdf44 hosted/dap: Add parentheses around bitwise operator. 2021-04-26 21:54:38 +02:00
Uwe Bonnes f9414d5826 cmsis-dap: Handle ADI DP22 devices on probes not multidrop capable. 2021-04-26 18:18:18 +02:00
Uwe Bonnes 923edc7f7e cmsis-dap: Fix wrong handling when reading data not word-aligned 2021-04-26 15:08:09 +02:00
UweBonnes 96bec7e3fb
Merge pull request #868 from UweBonnes/fixes
Revert "cmsis_dap: Always write full reportsize + 1 buffers"
2021-04-25 23:14:34 +02:00
Uwe Bonnes 877a6e694c Revert "cmsis_dap: Always write full reportsize + 1 buffers"
This reverts commit 61e237ec87.
This makes a CMSIS-DAP probe with version < 1.2 work again on DP V1 devices.
Status of other combination unknown:
    DP  V1 V2 V2/Multidrop
Probe
<  1.2  ok ok --
>= 1.2   ? ?  ?
2021-04-25 22:53:40 +02:00
UweBonnes da2fb7f210
Merge pull request #867 from UweBonnes/clean-static-from_probe
Clean static from probe

Some target probe functions used static RAM variables. This will fail if several of the same targets are in the JTAG/SWD chain and unnecessary remove RAM form the RAM pool if the target is not used. If the target needs more than one word, it allocated priv_storage is used. For a single needed word, one word has been added to the target structure as a union to allow decent naming.
2021-04-25 16:25:19 +02:00
Uwe Bonnes 1f67bab475 nxpke04: Move unsafe_enables to target bool union. 2021-04-25 16:03:23 +02:00
Uwe Bonnes f87dff8d83 kinetis: Remove static variables, add word union to target_s.
Add a word union to target structure to hold a single word variable.
2021-04-25 16:03:23 +02:00
Uwe Bonnes ac7c1057cc efm32/samd/samx5x: Remove static allocates strings. Allocate in priv_storage.
Static allocated variables in the different targets eat up common RAM and
will collide in chains with multiple similar targets.
2021-04-25 16:03:23 +02:00
Uwe Bonnes cddf02f174 samx5: Verbose error reports on protected devices. 2021-04-25 16:03:23 +02:00
Uwe Bonnes 8c8aa980cf adiv5: Detect unprotected SAMD5x only once 2021-04-25 16:02:20 +02:00
Uwe Bonnes f98b7274b4 hosted/stlinkv3: Detect STlinkV3 in bootloader mode. 2021-04-25 16:02:20 +02:00
Uwe Bonnes a83700d1cf stm32/usbuart: DMA stream handling is not STM32F4 specific 2021-04-25 16:02:20 +02:00
Uwe Bonnes 1330288271 firmware: Unify serial number handling
Use one file in dfu and server
For STM32, provide 3 ways to handle
- BMP way (8 bytes)
- DFU way (12 Bytes)
- Full unique id (24 Bytes), as with STLINK(V3) Bootloader
2021-04-25 16:02:20 +02:00
UweBonnes 8da2dee0c4
Merge pull request #857 from UweBonnes/rp
Support the Raspberry Pico RP2040

    Implement multi-drop
    Recognize , erase, flash and usb_reset
    Attach to the rescue DP will reset but attach itself fails.
2021-04-25 15:48:35 +02:00
Uwe Bonnes 1b26ff560d rp.c: Add reset_usb_boot as monitor command 2021-04-24 14:48:58 +02:00
Uwe Bonnes 52bffa70cf rp: Handle flash.
- Beware, after reset, only a valid flash payload get mapped to XIP!
  Only 0 is read from flash when flash image is not valid
2021-04-21 21:55:03 +02:00
Uwe Bonnes 2b0e255c40 cortexm: timeout and debug for run_stub() 2021-04-21 21:50:38 +02:00
Uwe Bonnes 61efe26348 swdp_scan: Break infinite loop after Dormant->SWD transition. 2021-04-21 21:50:38 +02:00
Uwe Bonnes fa5e69e3be RP 2040: Special handling for rescue DP
As the rescue DP provided no AP, trigger the reset with attach().
However attach will indicate failure also reset/halt has succeeded.
2021-04-21 21:50:38 +02:00
Uwe Bonnes ea92c8b8c8 cmsis-dap: Allow to use adiv5_swdp_scan. 2021-04-21 21:50:38 +02:00
Uwe Bonnes 23f942ac8c Raspberry RP2040: Recognize. No flash handling yet. 2021-04-21 21:50:35 +02:00
Uwe Bonnes 04d1c9805b swd: Remove swd_proc and swdptap.h. 2021-04-21 21:50:04 +02:00
Uwe Bonnes b6fbf86743 Extend ADIv5_DP_t for low level routines needed for multi-drop.
Will replace swd_proc
2021-04-21 21:50:04 +02:00
Uwe Bonnes 61e237ec87 cmsis_dap: Always write full reportsize + 1 buffers
Expect short reads and other errors else
2021-04-21 21:50:04 +02:00
Uwe Bonnes d6ade4d94e cmsis-dap: Use SWD_SEQUENCE if available. 2021-04-21 21:50:04 +02:00
Uwe Bonnes 5abb288c7a hosted: Provide the DP functions in swd_proc. 2021-04-21 21:50:04 +02:00
Uwe Bonnes fa561c8d66 adiv5_swdp: Starting point to handle multi-drop
- RP2040 show both DPs
- Multidrop test with STM32L552 and STM32H745 allows selection
  with "-m 0x4500041" (H7), "-m 1" (L552) or "-m 0x01002927" (RP2040)
2021-04-21 21:50:04 +02:00
Uwe Bonnes be3bfc48a8 cortexm: M33 has up to 8 hardware breakpoints 2021-04-21 21:22:59 +02:00
Uwe Bonnes 65f08cd46d README.md(top): Mention hosted build for BMP only. 2021-04-21 21:22:59 +02:00
Uwe Bonnes b1ac4187b9 Fix some formatting strings for 32-bit compile 2021-04-21 21:22:59 +02:00
Uwe Bonnes 637d76b585 cl_utils.c: Try jtag scan if swd scan did not give results. 2021-04-21 21:22:59 +02:00
Uwe Bonnes 5288eef617 cl_utils: With no size given, read the size of the lowest block. 2021-04-20 18:48:27 +02:00
Fabio Baltieri beaccf2714 target: stm32l4: add support for STM32WLxx
This adds support for the STM32WL series in stm32l4.c. These parts have
the same flash registers layout as the L4 series, but a different base.
Since there are already two sets of registers in this target file, this
adds support for register maps that can be customized for each device
ID.
2021-04-20 18:42:36 +02:00
Uwe Bonnes 21b80949ff Compile with -Os as default. Change like "make OPT_FLAGS=..."
SWD/JTAG Bitbang is compiled with -O3 for good bitbang speed.
2021-04-20 18:20:41 +02:00
Fabio Baltieri f55ad67b1b adiv5: catch timeout on adiv5_ap_read_id and abort
This adds a TRY_CATCH around the adiv5_ap_read_id() in
adiv5_component_probe() and resets the DP when that happens.
It seems like the STM32WLE5 comes with the AP of the inactive core
enabled in a way that does not make it detectable, and the current code
times out and leaves the whole device hanging.

Catching the timeout and calling adiv5_dp_abort() seems to restore the
device to a useable state.

Tested on Seed LoRa-E5 (STM32E5JC).
2021-04-19 16:57:13 +02:00
Vestrel 806787529f Use DMA for USBUSART TX/RX 2021-04-17 17:57:08 +02:00
Uwe Bonnes cf5b4afb38 bmp_serial/linux: Honor opt_list_only (-l). 2021-04-17 16:19:57 +02:00
fabalthazar d6b24c00c8 Fixed STM32G43x/G44x option bytes support
Previously took L4 values so FLASH_SEC1R was not applied
2021-04-17 14:44:30 +02:00
fabalthazar 99f9557cc0 Support for STM32G49x/G4Ax (category 4) 2021-04-17 14:44:30 +02:00