3e3e450 reduced the buffer size for the UART interface OUT endpoint to
32B, but left wMaxPacketSize at 64B. This effectively configures the
hardware to receive packets up to 32B in size while telling the host it
can send larger packets. On reception of a larger packet, the usb core
treats it as an error, drops the packet and replies with a STALL
handshake.
This commit fixes the issue by updating the descriptor to match the
buffer configuration.
Fixes#538
The swolisten program failed to print the cbw buffer correctly while
in dump mode. As printf() is used to print the dump, it is expected
that the cbw buffer is zero-terminated, which would only be
the case, if the cbw buffer is initialized with zeros, before filling it
with new data. One could set the entire cbw buffer to zero, but it
will be more efficient to only set the size-th byte to zero.
Furthermore, if a '%' character appears in the data, printf() will
attempt to format it, causing unexpected results.
This patch fixes the above 2 problems, by:
1. using the size variable to set the size-th byte of the cbw
buffer to zero, before passing it to printf().
2. calling printf() with a "%s" formatting string, followed by the
data buffer, cbw.
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
- If host provided /dev/serial/by-id, device must not be given and
multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
Thanks to Dave Marples <dave@marples.net> for input.
- Issue only one reset. Start with SRST. Only if not seen, use SYSRESETREQ
- Wait for release of DHCSR_S_RESET_ST before issuing more commands
- Add timeout to catch reset line stuck low
- Remove AP errors
Last libopencm3 upgrade resulted in problems for libopencm3 build on
windows. Cross-mingw builds where no affected. Recent changes of
libopencm3 seem unrelated to libopencm3 functionality used by BMP
pc-hosted will abort, if the reset line is held externally to some value.
As assert is either driven or driven open drain, we can assume assert
immediate. For deassert, logic levels differences between the debugger and
the debuggee may apply and other ways to check the result are needed, like
CORTEXM_DHCSR_S_RESET_ST.
Sid Price
Koen De Vleeschauwer
Vegard Storheil Eriksen
Uwe Bonnes
Pieter du Preez
mean
Francesco Valla
Extreme kefir
zvova7890
Ondrej Mikle
Sid Price