963df9febc
stlink: Use common initialization and detect V2.1 boards.
...
Factor out hardware revision detection, USB detach and power settings, as
all three program (bootloader, bmp and dfu-upgrade) need it.
2017-09-21 18:43:06 +02:00
2eb2f8edd7
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-09 13:07:06 +12:00
cd1d72257f
Cleanup of SRST handling.
...
- Remove connect_assert_srst global.
- Attach functions always release reset.
- Platforms provide a method to poll the reset pin.
- Reset on scan is all internal to command.c
- Reset is released on a failed scan. Fixes #111
2016-04-19 13:12:16 -07:00
68f54a3545
Remove old platform specific error handling macros.
2015-03-22 14:06:56 -07:00
3e466f2d23
Factor out timing routines common to all STM32 targets.
2015-03-02 21:59:04 -08:00
b07ffffcee
Factor out common cdcacm.c from stm32 and tm4c.
...
Cleaned up interface to enter bootloader and read serial number.
2015-03-02 10:16:33 -08:00
4d4813de87
Clean up includes everywhere.
...
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
2015-03-01 22:16:04 -08:00
75001a4421
Factor Morse code functions out of platform code.
2015-02-28 22:05:10 -08:00
a5549d630c
Whitespace cleanup.
2014-10-16 13:50:56 -07:00
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
12aeaad441
[locm3] Use the new clock-enabling mechanisms in locm3.
2014-02-13 18:21:16 +01:00
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
8c877d6dfa
Fix trailing whitespace everywhere.
2013-06-17 15:53:32 +12:00
cdaed128c1
stlink: add support for SRST handling
...
This enables SRST signals in open drain mode for both stlinkv1 and
stlinkv2 hardware platforms.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-14 12:34:53 +12:00
91b481731d
stm32f1/stm32f4: fix hardware CRC calculation
...
This was real-life tested on stm32f1 hardware including computation
for odd-sized ranges.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:35:23 -07:00
dee82a0d4f
Document changes between ST-Link V1 and V2 and implement needed changes
2013-02-15 17:39:27 +01:00
747cc58c2c
STLINK: Unconditionally enable MCO from 8 MHz HSE to PA8 as on original firmware. F3 Discovery has has no quarz for the F3 and needs it.
2013-01-21 12:48:37 +01:00
04415582bd
cdcacm: move non-constant parts to platform.[hc]
2013-01-21 11:02:43 +01:00
67f8176c5b
stlink: Add the UART
2013-01-21 11:02:43 +01:00
16b9c1e83f
stlink: Update to current libopencm3 usb api.
2013-01-21 11:02:43 +01:00
5dff263078
Add delay after reset request.
...
Hopefully this fixes problems observed with failing vFlashWrite.
2012-07-01 22:40:43 +12:00
53af978295
Allow user to specify JTAG IR lengths.
...
This allows the use of devices that shift out values other than 0x01
from IR.
2012-06-30 16:47:23 +12:00
54f4467c0f
Added stlink platform for Discovery boards and ST's ST-Link hardware.
2012-06-10 19:06:37 +12:00
Uwe Bonnes
Gareth McMullin
Richard Eoin Meadows
Frantisek Burian
Paul Fertser