Uwe Bonnes
df05d7ce7b
libftdi: Allow device specific port/pin to read SWD bitbanged.
...
Gracefully abort swd scan if devices can not do SWD.
Best effort to indicated SWD capability on existing cables and
add descriptions for the cables.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
fce25b9fd5
libftdi/swdptap.c: Substantial speed increase for bitbanging SWD.
...
Provide the swd sequences unrolled.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
992ccf91a9
libftdi/swdptap.c: Use MPSSE Mode for bitbanging SWD.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
f3cacba219
libftdi: Flush buffer with detach.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
2ec078cfcf
libftdi/jtagtap.c: Allow NULL as one DI/DO argument jtagtap_tdi_tdo_seq.
...
Implement jtagtap_tdi_seq() by calling jtagtap_tdi_tdo_seq().
2018-05-30 19:21:03 +02:00
Uwe Bonnes
de33473535
libftdi/jtagtap: Copy DI direct into the write buffer.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
aa938c6dae
libftdi/jtagtap: Try harder to initialize Ftdi MPSSE jtag mode.
...
After "mon s" at least the second "mon j" now succeeds again.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
c548e307fe
libftdi/jtagtap: Clean up code.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
7d45bd4869
ibftdi/jtagtap: Remove magic numbers.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
6f0a46d9c1
libftdi: Export active cable description.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
68c7180376
libftdi: Add ftdiswd variant.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
f4bc6f9ddd
libftdi/platform.c: Issue SEND_IMMEDIATE before reading.
2018-05-30 19:21:03 +02:00
Uwe Bonnes
744deb678d
libftdi/platform.c: Only set bit direction with MPSSE SET_BIT_XXXX.
2018-05-30 19:21:03 +02:00
Gareth McMullin
48d232807e
Merge pull request #337 from adamgreig/stm32f4-ram-size
...
Update maximum RAM sizes for F4 and F7 devices
2018-04-26 13:38:11 +12:00
Adam Greig
e1cefb2031
Update maximum RAM sizes for F4 and F7 devices
2018-04-24 11:06:07 +01:00
Uwe Bonnes
93f3b14b68
stm32f1(f0): Do not read normal device registers during probe.
...
Device may not be halted and memory map setup may fail.
2018-04-23 11:06:08 +12:00
Uwe Bonnes
a0596a0dcc
stm32l4: Build Memory Map during attach.
...
Reading target registers while target not halted may fail and result in
invalid memory map.
2018-04-23 11:06:08 +12:00
Uwe Bonnes
5f404cdbc0
Construct memory map on the stack
...
The memory map uses 1k of SRAM and is only needed during attach. Release
after use lowers pressure on SRAM.
2018-04-23 10:51:04 +12:00
Uwe Bonnes
6127a6431e
stlink: Check nRST line level when setting SRST.
...
Problem: On some boards flashing hanged.
Cause: Releasing SRST caused a slow rise of nRST and flashing
started while the target still was in reset.
Attention: platform_delay(ms) only resolved 0.1 s.
Nucleo-P boards have SRST unconnected to target nRST by default.
2018-04-23 10:48:05 +12:00
Gareth McMullin
63967346cd
stm32f4: Don't duplicate resources on reattach.
2018-04-23 10:48:05 +12:00
Gareth McMullin
00decb3718
target: Separate function to free memory map.
2018-04-23 10:48:05 +12:00
Gareth McMullin
1fd2a24c2d
stm32f4: Only construct memory map at attach.
2018-04-23 10:48:05 +12:00
Uwe Bonnes
72c1498ae1
stlink: Make SWO Trace Buffer smaller.
...
Changes for delayed memory map setup otherwise overflow SRAM silently.
2018-04-23 10:48:05 +12:00
Gareth McMullin
9d7925792f
Merge branch 'master' into always_buffer_flash
2018-04-23 10:40:20 +12:00
Gareth McMullin
28bd4fc0ce
Merge pull request #305 from UweBonnes/swo_async
...
Use async SWO from the bluepill pull request.
2018-04-09 08:27:49 +12:00
Mike Walters
fa62403ee3
nrf51: Add nRF51802 device id. ( #331 )
2018-04-03 10:45:56 +12:00
Uwe Bonnes
fc25a3339a
traceswoasync: Implement async swo for stm32.
...
Use for stlink.
Uses dma with large buffer.
Pull up swo to provide idle level on unconnected swo pin.
2018-03-27 13:40:49 +02:00
Uwe Bonnes
93bc3a155a
traceswo: Provide command option for async swo.
2018-03-27 13:40:49 +02:00
Uwe Bonnes
3e3e450408
cdcacm.c: Use less buffer for the usb_uart buffers and reallocate.
...
With 128 bytes for both usb_uart buffers, traceswo gives errors!
Keep the size for the receive buffer and diminisch the transmit buffer,
as there is no flow control to the device.
Probably related to https://github.com/libopencm3/libopencm3/issues/477
2018-03-27 13:40:49 +02:00
Gareth McMullin
cfaa5ea963
Merge branch 'korken89-master'
2018-03-27 13:01:06 +13:00
Gareth McMullin
76bfb4929d
Use lowercase register names.
2018-03-27 13:00:39 +13:00
Gareth McMullin
a3f855ce5c
Merge branch 'master' of https://github.com/konsgn/blackmagic into konsgn-master
2018-03-27 08:03:03 +13:00
Christopher Woodall
31965a5bbc
Added support for k64 ( #301 )
2018-03-25 14:43:33 -07:00
Akila Ravihansa Perera
471ce2547c
Added LPC17xx support ( #317 )
2018-03-25 12:53:30 -07:00
Mark Rages
a41d8cb97a
Another nRF52 device id. ( #315 )
2018-03-25 12:37:51 -07:00
Emil Fresk
1ee6d4503e
Update to split 'special' into its sane parts (update from @mubes)
2018-03-24 16:44:59 +01:00
Konsgn
04fbabb299
mkl27 support
2018-01-21 23:43:01 -05:00
konsgn
1fe870b8df
added MKL27<128kB support
2018-01-16 13:23:36 -05:00
Adam Heinrich
f5cac4c78d
platforms/stm32: Ignore noise errors on USBUART
2018-01-13 21:11:17 +01:00
Uwe Bonnes
922f857de7
stm32f1.c: Add missing fall through statement needed by GCC7.
2017-12-18 13:56:59 +01:00
Uwe Bonnes
1f3c235205
src/target/stm32f1.c: Add CCM Ram of STM32F303 devices.
2017-12-08 13:39:24 +01:00
Gareth McMullin
048e8447a5
target: Only support buffered flash writes
2017-10-13 08:58:37 +13:00
Gareth McMullin
c53a12bfd1
cortexm: Better cache support for Cortex-M7
...
- On probe, read CTR for cache presence and minimum line length
- Make D-Cache clean a function
- Clean before memory reads
- Clean and invalidate before memory writes
- Flush all I-Cache before resume
2017-10-12 09:26:01 +13:00
Nick Downing
0e5b3ab00e
Make Cortex M driver write DCCIMVAC (Data cache clean and invalidate by address to the PoC=Point of Coherency) prior to reading or writing each 32 bytes of RAM
2017-10-12 08:41:58 +13:00
Gareth McMullin
9a5b31c37b
Fix fallthrough warnings on gcc 7
2017-10-09 11:07:29 +13:00
Uwe Bonnes
120a2d9378
target: Fix calculation of erase size.
2017-10-05 22:11:01 +02:00
Uwe Bonnes
a7815fff3d
target.c: No need to split write while still in same flash block.
2017-10-04 21:52:29 +02:00
Uwe Bonnes
25610e5ec5
target: Fix unconsistant use of tmplen.
2017-10-04 21:52:29 +02:00
Gareth McMullin
f27f3bad5c
libftdi: Fix tdi_tdo_seq result unpacking
2017-10-05 08:26:33 +13:00
Gareth McMullin
2db42ba8e5
Merge pull request #287 from gsmcmullin/update_libopencm3
...
Update libopencm3
2017-10-04 10:58:44 +13:00
Uwe Bonnes
0aa47113f3
stm32f4: Fix F4 dual bank OPTCR1 to option byte mapping.
2017-10-02 16:22:14 +02:00
Uwe Bonnes
c4d3712b39
stm32f4.c: Rework flash structure recognition.
...
Dual bank devices do not have sectors (8)12..15 !
Dual banks devices need to MER1 set for mass erase.
F72x has different FLASHSIZE_BASE
2017-10-02 16:22:14 +02:00
Gareth McMullin
0ed66547d5
Fix libopencm3 breakage
2017-09-25 11:17:03 +13:00
Uwe Bonnes
4966168802
s[t|w]link: Implement ENABLE_DEBUG.
2017-09-23 16:40:28 +02:00
Uwe Bonnes
ce1ef6e41b
stm32: Move rdi handling to common stm32 code.
2017-09-23 16:39:35 +02:00
Uwe Bonnes
203f6702d8
Flashsize_F103: Options for BMP on STM32F103C8 devices
2017-09-21 23:05:20 +02:00
Uwe Bonnes
963df9febc
stlink: Use common initialization and detect V2.1 boards.
...
Factor out hardware revision detection, USB detach and power settings, as
all three program (bootloader, bmp and dfu-upgrade) need it.
2017-09-21 18:43:06 +02:00
Gareth McMullin
259f1b90df
cortexa: Check for fault on set/clear soft breakpoint.
2017-09-20 11:16:36 +12:00
Gareth McMullin
1cb4271749
cortexa: Remove problematic code for AHB access.
...
The old code for 'fast' memory accesses using the AHB directly
has problems with data consitency. Until this can be resolved, I'm
removing the affected code.
2017-09-19 09:13:22 +12:00
Gareth McMullin
2df0c7d6a7
Merge pull request #261 from cpavlina/tm4c
...
lm3s/tm4c: add TM4C1230C3PM
2017-09-06 15:34:42 +12:00
David R. Piegdon
46e363393f
Add nRF52840 support (PCA10056, nrf52840 PDK)
2017-09-03 23:05:29 +00:00
Carl Sandström
37f9623de2
Added NRF51_FICR_CONFIGID for nRF51822 QFAA H2
2017-08-30 17:14:52 +02:00
Uwe Bonnes
37bb86267a
STM32F0: Several STM32F0[3|7]0 have same ID as other STM32F0X0.
2017-08-28 22:58:59 +02:00
Chris Pavlina
a0b0b8a716
lm3s/tm4c: add TM4C1230C3PM
2017-07-21 13:29:41 -06:00
Gareth McMullin
7663794fdf
Merge pull request #247 from schodet/stm32f4-x8-x32
...
Allow programming STM32F4 when using a low voltage
2017-07-09 14:33:06 -07:00
Nicolas Schodet
3846ea4708
stm32f4: allow selection of flash programming parallelism
2017-07-09 23:26:49 +02:00
Gareth McMullin
09f49b469d
Merge pull request #256 from nar0909/patch-1
...
New Device Id update - QFAA G1
2017-07-09 13:45:52 -07:00
nar0909
43ac4a04f7
New Device Id update - QFAA G1
...
New device Id - for NRF51822 QFAA G1 1529AM.
2017-07-04 12:32:39 +10:00
Daniel Egger
f036be8cb2
Identify and support LPC1112/102 MCU as well
...
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
2017-06-23 21:52:13 +02:00
Gareth McMullin
984f8b3d94
Merge pull request #248 from schodet/typo
...
stm32f4: fix typo in target name
2017-06-22 18:35:29 -07:00
Gareth McMullin
40ac8e1004
Merge pull request #241 from gsmcmullin/no_magic_vtor
...
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-22 16:31:09 -07:00
Nicolas Schodet
02ce5e23b6
stm32f4: fix typo in target name
2017-06-19 10:56:20 +02:00
Nicolas Schodet
680aa30d52
stm32f4: add support for STM32F4[67]9
2017-06-19 10:41:38 +02:00
Gordon Smith
1ee1f441d5
stm32f4: write flash using byte access
2017-06-16 14:45:16 +02:00
Uwe Bonnes
408c5a9df2
stm32f4: Try to handle option bytes for more devices.
...
Correct the table for the OPTCRx values from errors in documentation and
error when entering the values.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
8a7455f63e
src/target/stm32f4.c: Add STM32F7[2|3]x.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
84e036a804
target/stm32f4: Document FLASH_OPTCR(1|2) registers.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
2216587b39
src/target/stm32f4.c: Remove missleading DTCM comment.
...
Use different command string for F74x and F76x.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
dc1c7611a9
src/target/stm32f4.c: All STM32F7 devs have option bytes at 0x1fff0000.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
e43017d0a6
src/target/stm32f4.c: Add STM32F412 and F413.
...
F413 needs its own clause, as there is memory > 1 MB but no second bank.
2017-06-09 13:03:26 +02:00
Uwe Bonnes
24ed65d6b6
src/target/stm32f4.c: Declare CCMRAM only for devices with CCMRAM.
2017-06-09 13:03:26 +02:00
Gareth McMullin
2eb2f8edd7
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-09 13:07:06 +12:00
Uwe Bonnes
a7771fa23f
stlink/swlink: Remove missleading comments.
2017-06-08 18:25:43 +02:00
Gareth McMullin
aaa7b0e38e
Merge pull request #217 from UweBonnes/stm32l4
...
Stm32l4
2017-05-23 12:22:04 -07:00
Gareth McMullin
fd467269eb
Merge pull request #233 from gsmcmullin/parallel_make_fix
...
Fix parallel build.
2017-05-23 12:20:21 -07:00
Gareth McMullin
539d9e14ec
Merge pull request #223 from gsmcmullin/nrf51_c_stub
...
nrf51: Replace stub with C version and pass params in registers
2017-05-23 12:00:08 -07:00
Gareth McMullin
ecc0d9807d
Fix parallel build.
...
Add explicit dependency of command.c on version.h
Remove version.h on make clean.
2017-05-23 11:57:35 -07:00
Uwe Bonnes
91839f3aee
stm32l4.c: Handle options.
2017-05-11 23:31:43 +02:00
Uwe Bonnes
289be4d9db
stm32l4.c: Add STM32L43/L44/L45/L46/L49/L4A.
2017-05-11 23:31:43 +02:00
Uwe Bonnes
8cc2c44dbf
f4discovery: Use Magic constant in RAM for Bootloader entry.
2017-05-11 22:21:38 +02:00
Uwe Bonnes
a0e47c392b
f4_discovery: Clean up platform.h and Readme.
2017-05-11 21:53:01 +02:00
Uwe Bonnes
814eb0e3a2
f4discovery: Make DFU work (again?)
2017-05-11 21:52:24 +02:00
Uwe Bonnes
f5dd3006fb
STM32: Generate same serial number as internal DFU bootloader.
2017-05-11 21:52:24 +02:00
Uwe Bonnes
b7235da97f
dfucore.c: Announce no writable bootloader pages when device is read proteced
...
or bootloader is write protected.
Device read protection or write protection on first 4 bootloader pages
can only be removed by mass erase. Triggering mass erase with a program
running from flash is doomed for failure.
User can force bootloader update, at their own risk to brick the device.
2017-05-07 13:19:37 +02:00
Uwe Bonnes
b09a522f37
STM32F103: Use flash size from device for DFU string.
...
Complements #204 .
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
2017-05-07 13:19:37 +02:00
Gareth McMullin
94c822cb62
nrf51: Replace stub with C version and pass params in registers
2017-05-03 13:10:01 -07:00
Gareth McMullin
6b592b4118
Merge pull request #218 from stoyan-shopov/breakpoint-removal-bugfix
...
fixed a bug in the breakpoint removal code
2017-05-03 12:11:50 -07:00
Uwe Bonnes
5af76a1b74
dfu_f1/dfu_upgrade: Do not set read protection.
...
As the first 4 pages of the bootloader will always keep write protection
once read protection is applied, with the second update of the bootloader
only the higher pages where updated effectivly.
In most cases this resulted in an inaccessible device!
2017-04-29 14:58:41 +02:00
stoyan shopov
01e3582525
fixed a bug in the breakpoint removal code
2017-04-28 13:22:59 +03:00
Gareth McMullin
b10971b19b
Merge pull request #206 from UweBonnes/dfu-upload
...
Dfu upload
2017-04-27 10:07:37 -07:00