f7670fcd44
ftdi_bmp: Add verbosity for libftdi_jtagtap_tdi_tdo_seq()
2021-08-15 16:43:29 +02:00
3df692ecb2
adiv5_swdp_scan: If SWD scan fails, try a JTAG scan.
2021-08-15 16:43:29 +02:00
5c8e277663
hosted/dap: Fix tdi_tdo_seq.
2021-08-15 16:43:29 +02:00
2d4a503135
jtag_scan: Rework chain detection
...
Fixme: stlinkv2/hosted probably does only handle STM devices. Check if
jtag_devs.c really needed.
2021-08-15 16:43:29 +02:00
e1a1865de9
remote/jtagtap_tdi_tdo_seq: Split up large transactions.
...
FIXME: One remote transaction still can only do up to 64 ticks, leaving
room for speed enhancement with larger transactions.
Firmware assumes (1LL << 65) == 0LL !
2021-08-15 16:43:29 +02:00
8084a75634
cl_utils: Allow Hardware reset from the command line
2021-08-15 16:43:29 +02:00
36836d0746
ftdi_bmp: Fix setting bits and FTDIJTAG srst.
2021-08-15 16:43:29 +02:00
cfdf55855e
ftdi_bmp: Export and use reset functions.
2021-08-15 16:43:29 +02:00
1845d71f00
jtag_scan: Deliver full idcode to the handler.
2021-08-15 16:43:29 +02:00
0d78331149
remote/jtag_tdi_tdo_seq: Fix wrong bitmask calculation.
2021-08-15 16:43:29 +02:00
c7bc4b6a5d
Bug fix in Flash erase function for LPC MCUs.
2021-08-13 16:18:53 +02:00
5eb43a1ddb
platforms: stm32f4x1 blackpillv2 as variant of f4discovery
...
Compile as make PROBE_HOST=f4discovery BLACKPILL=1
2021-08-13 16:18:05 +02:00
be534a9c5e
Turn error LED off after successful attach to target (error LED blinks on 'target lost').
2021-08-13 16:10:37 +02:00
72bd825a60
Add support for NXP LPC11xx XL series, add 'readuid' command for some MCUs of the LPC11xx series where it was missing; add comments mapping Device IDs to part descriptions.
2021-07-31 16:08:34 +02:00
6d6a67b44b
timeout: Make sure we wait at least the period requested ( #900 , #902 )
...
Fixes bug introduced with last commit( Recover from bad AP access)
Let STM32 timers run at 100 Hz against 10 Hz before.
Programming STM32F103 failed random (#900 ) with 20 ms timeout requested
against the 100 ms timeout granularity provided up to now.
STM32 Firmware only ticked at 10 hertz, so the sequence "low_access",
"set timeout", "send out 8 bit command", "read 3 bit result" when
reading "wait" and timer increment tick happening during that sequence
will already hits the timeout even so only mininal time has elapsed
and not the requested timeout.
2021-07-27 10:59:03 +02:00
0c63903071
adiv5: Recover from bad AP access.
...
E.g. AP1 on a STM32WLE5 points to a ROM table, but access to the ROM table
via AP1 hangs forever.
- Substantial reduce timeout when wait for a response. Valid access should
succeed fast.
- Abort AP access to free DP for other accesses
- Don't throw exception, only set dp->fault
- React on higher level
2021-07-15 15:06:54 +02:00
b887a8d355
stm32: Portability changes
...
Allow to compile on STM32F0 platform too.
2021-07-15 15:06:54 +02:00
41719c5559
Merge pull request #897 from UweBonnes/fixes
...
bmp_libusb: Check only for cmsis_dap if no cable has been found yet.
2021-06-18 12:13:19 +02:00
3cfd8226ba
bmp_libusb: Check only for cmsis_dap if no cable has been found yet.
2021-06-18 11:44:50 +02:00
a0dbb2a787
Merge pull request #896 from RadinnAB/for-upstream
...
Add nRF51 erase UICR command and fix some warnings
2021-06-07 17:43:56 +02:00
ea4b232996
Fix de83dbb: duplicate BMP_MODE_FLASH_VERIFY -> BMP_MODE_FLASH_WRITE_VERIFY
2021-06-07 17:29:41 +02:00
5ea01030e2
Add nRF51 command for (only) erasing the UICR registers
...
Original implementation by: Benjamin Vedder <benjamin@vedder.se>
2021-06-07 13:50:36 +02:00
d987a8dd8c
Add define to allow platform override of debug printf function
2021-06-04 06:58:29 +02:00
4b8c4990dc
Fix warning about unused variable in adiv5.c
...
This happens if the platform has debugging support but debugging
is not enabled.
2021-06-03 12:56:41 +02:00
711a87f7ba
Fix some warnings when compiling with -Wshadow
...
There are still a few more places that would need to be corrected
before -Wshadow could be added by default.
2021-06-03 12:55:28 +02:00
53f022d29b
Require semicolon after debug log statements
...
This also fixes a warning about an empty body in cortexm.c
if PLATFORM_HAS_DEBUG is defined but debugging is not enabled:
if (platform_timeout_is_expired(&to))
DEBUG_WARN("Reset seem to be stuck low!\n");
2021-06-03 12:52:07 +02:00
04eab8e1f8
Add guard around _GNU_SOURCE define
...
This avoids warnings if the define has already been set by the
build system.
2021-06-03 12:51:27 +02:00
2a0d608b07
hosted: Fix last commit
...
-Wno-format-truncation may not be understood by all systems
2021-06-01 18:42:37 +02:00
1b49823f64
Fix hosted compile on MacOS. hidapi-libusb has a different name
2021-06-01 16:58:25 +02:00
de83dbb7e2
cl-utils: Fix bug introduced with 5288eef617
...
Always use the file size for write and verify.
2021-06-01 16:23:19 +02:00
c0437e7b25
bmp_serial: Autodetect more BMP string variants.
2021-06-01 16:23:19 +02:00
891633322a
lpc: Care for protected pages on LPC80x devices.
2021-06-01 16:23:19 +02:00
f7b4697280
lpc11xx/lpc8c04: Do not expose two top system flash sectors.
2021-06-01 16:23:19 +02:00
42ebcac329
efm32_devices: Rearrange struct efm32_device_t to save flash space.
2021-06-01 16:23:19 +02:00
21a702dc1e
lpc: More verbosity and more definitions
2021-06-01 16:23:19 +02:00
6454d0bc96
bmp_libusb: Invalidate manufacturer and product in case libusb_get_string_descriptor_ascii fails.
...
Prevent more false detections
2021-05-20 12:06:56 +02:00
df575eb090
stm32_mem.py: Wait longer for device to appear.
2021-05-20 12:06:56 +02:00
7f1a560288
stm32/usbuart: Clear USART_ICR if provided.
...
Otherwise endless interrupts happened.
2021-05-20 12:06:56 +02:00
90534b3cf6
stm32: portability enhancements
...
Needed for e.g. stlinkv3
2021-05-20 12:06:56 +02:00
87acd99fe4
cortexm: For Cortex-M0+ devices, probe also for lpc11 to detect LPC80 #884
2021-05-18 12:24:00 +02:00
cb4cff2c71
hosted/ftdi: Compare only for length of the string given in the header
...
Devices may have added version like "Tigard V1.1" vs "Tigard"
2021-05-18 12:24:00 +02:00
c3fd198f0d
bmp_libusb: Reject non-BMP devices with VID 1d50.
2021-05-18 12:24:00 +02:00
36ad6efc6f
cmsis_dap.h: Fix wrong leftover argument.
2021-05-16 17:17:33 +02:00
f0dd8c9517
cl_utils: List -l option in the help.
2021-05-16 17:17:33 +02:00
517d5b5b31
rp: Show spinner only when called from monitor command.
2021-05-16 11:26:14 +02:00
0ab10fee0b
rp: Increase timeout for flash_range_program
...
If the RP2040 is using the ring oscilator (ROSC) rather than the crystal
oscilator (XOSC) then flashing program will take much longer. As the XOSC is not
enabled at boot we should not assume it will be enabled before the debugger is
connected (or indeed at all), thus should use the longer timeout during load
commands.
2021-05-16 11:26:14 +02:00
ff30259354
rp: Add more debug logging during flash
2021-05-16 11:26:14 +02:00
e453740aca
rp: Increase spinner timeout to 500ms
...
Increasing spinner timeout to 500 means `tc_printf` is not called during
the `_flash_range_erase`. This is important as `_flash_range_erase` is
used when loading. This fixes the issue:
https://github.com/blacksphere/blackmagic/issues/875
Also adding spinner timeout counter to reduce bus traffic.
2021-05-16 11:26:14 +02:00
67c9003522
rp: Flush cache after erase and write
...
The RP2040 datasheet suggests that _flash_flush_cache and _flash_enter_cmd_xip
should be called after erasing and writing to flash.
2021-05-16 11:26:14 +02:00
f880734050
Fix compiling for native probe
2021-05-16 11:26:14 +02:00
Uwe Bonnes
Thiadmer Riemersma
aam335
fabalthazar
Björn Mellström
James Turton