8386096f01
zeroplus-logic-cube: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
c8733a2bbb
nexus-osciprime: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
e44ac12a29
agilent-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
a59b4eef55
victor-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
70424328c1
fluke-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
dccda194db
colead-slm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
7faf69da10
lascar-el-usb: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
d40073113b
hantek-dso: Small debug fix
2013-04-11 18:32:07 +02:00
86bb3f4a86
hantek-dso: deprecate struct sr_rational
2013-04-11 18:32:07 +02:00
d00088ca6d
demo: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
f627afd65b
hantek-dso: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
aeea057220
ols: allow for disabling of RLE as well
2013-04-11 18:32:06 +02:00
e46aa4f611
ols: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
d6836bf129
fx2lafw: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
13d8e03c4f
Bump copyright year
2013-04-11 18:32:06 +02:00
3fd1d0ee1c
configure.ac: Improve USB/EZUSB/serial checks.
...
- If libusb-1.0 is not found, do not compile in ezusb.c and usb.c since
they require libusb.h. The respective hardware drivers that use
libusb-1.0, and usb.c and/or ezusb.c will be excluded from the build
elsewhere in configure.ac. Rename NEED_EZUSB to NEED_USB.
- Drop the NEED_SERIAL check and always compile in serial.c. This is a
very small chunk of code, it does not depend on any external
libraries that might be missing, and it compiles on all architectures.
Thus there's no need to conditionally include or exclude it.
2013-04-09 17:49:13 +02:00
3f98bf7017
Fix kernel driver attached check
...
The check is really only broken on darwin, but useful on all other
platforms, even if only Linux can actually detach a driver.
2013-04-07 14:14:16 +02:00
8c971b6e5c
hantek-dso: cosmetics
2013-04-07 14:01:03 +02:00
7b78b2f78f
hantek-dso: use per-device firmware filenames
2013-04-02 14:20:29 +02:00
3ebce226a2
s/sr_config_make/sr_config_new/.
...
This matches the naming of other/similar functions better.
2013-03-23 14:16:00 +01:00
333bf022e3
rigol-ds1xx2: Use ARRAY_SIZE.
2013-03-23 14:14:58 +01:00
3864648bb6
serial-dmm: Add support for RadioShack 22-805
...
Protocol-wise, this is identical to the 22-168, except that it communicates at
600 baud instead of 1200 baud.
2013-03-20 20:36:56 -05:00
cc840ab618
serial.c: FreeBSD and OpenBSD don't have OFILL either.
2013-03-17 15:07:50 +01:00
8e77bc20b9
lascar-el-usb: push samplerate before data log
2013-03-16 21:52:02 +01:00
361d15110c
lascar-el-usb: support for SR_CONF_DATALOG
2013-03-11 16:37:02 +01:00
9857276261
ols: use ptr to int dereference for SR_T_BOOL
...
This mad ptr to int casting has to go.
2013-03-11 16:37:02 +01:00
2474d87e8c
demo: sync get/set options
2013-03-03 21:21:08 +01:00
365f04d61f
mso-19: Initial analog probe support (unfinished).
...
- Added the analog probe (unfinished).
- Reset trigger to state to 0 before capture, just incase the scope is in
the middle of a capture.
2013-03-03 17:59:06 +01:00
5952553f56
mso-19: Fixed warning.
2013-03-03 17:58:46 +01:00
ff17e6ba50
mic985xx: Add missing memset().
2013-02-11 18:23:17 +01:00
6f3e5335ad
mic-985xx: Add support for the MIC 98581.
...
This device only supports temperature measurements, no humidity.
2013-02-11 16:53:28 +01:00
be6db330f8
hantek-dso: minor fixes
2013-02-10 17:06:56 +01:00
8421ffa44d
asix-sigma: don't try to free static storage
2013-02-10 17:06:56 +01:00
cd2f0fe22c
Add/use std_hw_dev_acquisition_stop_serial().
2013-02-08 23:32:45 +01:00
17548571cc
zeroplus: Only report supported samplerates.
...
The currently supported model LAP-C(16032) doesn't support the
samplerates 150MHz and 200MHz which some of the other models have.
Thus, do not report these samplerates to the frontends. E.g. sigrok-cli
should not show them via --show and GUIs should not list them in their
"Samplerates" drop-down.
2013-02-08 23:19:50 +01:00
e495a676eb
zeroplus: Cosmetics, small fixes, drop unneeded stuff.
2013-02-08 23:19:50 +01:00
58c5f2ed17
zeroplus: Split into api.c and protocol.c.
2013-02-08 21:53:50 +01:00
3e9b7f9c77
Rename session_dev_id to cb_data everywhere.
...
We use 'cb_data' in all drivers these days, make the few remaining ones
that use 'session_dev_id' consistent.
2013-02-07 11:26:02 +01:00
6fab7b8f53
Driver struct cleanups.
...
- Explicitly list .config_get in all drivers for consistency, and set it
to NULL if unused (whether or not a driver implements it is optional).
- List all 'struct sr_dev_driver' entries in the same order in all drivers.
- Move the check whether .config_set/.config_list exist (i.e., are non-NULL)
into sanity_check_all_drivers().
2013-02-07 10:58:35 +01:00
4afdfd4628
Add and use std_session_send_df_header().
...
This is a small helper function which sends the SR_DF_HEADER packet that
drivers usually emit in their hw_dev_acquisition_start() API callback.
It simplifies and shortens the hw_dev_acquisition_start() functions
quite a bit.
It also simplifies the input modules which send an SR_DF_HEADER packet, too.
This patch also automatically removes some unneeded malloc/free in some
drivers for the 'packet' and 'header' structs used for SR_DF_HEADER.
2013-02-07 10:46:28 +01:00
961009b0c4
hw_dev_close(): Move common checks to wrapper.
...
Check the relevant arguments for != NULL before calling the actual
driver-specific function, so that the driver can safely assume those
arguments are non-NULL. This removes the need to duplicate these
checks in every driver.
2013-02-05 18:46:33 +01:00
0e94d524c1
Shorten/simplify hw_dev_list() implementations.
2013-02-05 18:27:05 +01:00
7c8a9e1e0f
serial-dmm: Drop unneeded g_try_malloc0().
2013-02-02 12:34:25 +01:00
c5d6f5cc1c
brymen-dmm: Cosmetics, coding-style, consistency.
...
Also, name the driver "brymen-bm857" in preparation to doing "subdrivers"
for other Brymen models later (similar to serial-dmm).
2013-02-02 12:07:45 +01:00
943e94f567
brymen-dmm: Use std_hw_init().
2013-02-02 11:19:27 +01:00
601fb67cc4
brymen-dmm: Add support for Brymen BM857
...
This patch might also work for a number of other Brymen models
-- 859(a), 867, 869---
including their respective rebadges from Greenlee, Extech, and Amprobe.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-02-02 11:19:27 +01:00
20cbc7854d
brymen-dmm: Initial driver skeleton.
2013-02-02 11:19:27 +01:00
0cd8e23140
Initial driver implementation for MIC 98583.
...
This is a USB/serial (Prolific) based temperature and humidity logger.
2013-02-02 11:13:45 +01:00
7ec5b54955
mic-985xx: Initial driver skeleton.
2013-02-01 23:52:57 +01:00
6d1161142d
zeroplus: Use message logging helpers.
2013-02-01 00:24:40 +01:00
d3b38ad389
Drivers: Explicitly list sr_samplerates fields.
...
This makes it a bit easier to understand which value means what, just
from looking at the driver code.
2013-01-29 12:56:02 +01:00
063e7aef6d
Factor out common hw_init() driver code.
...
Most drivers do pretty much the same things in their hw_init()
right now, so factor out that code to std_hw_init() in std.c.
2013-01-29 12:56:02 +01:00
4b97c74e0b
sr_driver_scan(): Improve checks.
...
Check the relevant arguments for != NULL before calling the actual
driver-specific function, so that the driver can safely assume those
arguments are non-NULL. This removes the need to duplicate these
checks in every driver.
Also, do some minor whitespace and consistency improvements.
2013-01-29 12:56:02 +01:00
c0eea11c45
sr_driver_init(): Improve checks.
...
Check the relevant arguments for != NULL before calling the actual
driver-specific function, so that the driver can safely assume those
arguments are non-NULL. This removes the need to duplicate these
checks in every driver.
Also, change one SR_ERR to the more correct SR_ERR_MALLOC, and assign
sr_ctx in the rigol-ds1xx2's hw_init() function, like all the other
drivers do.
2013-01-29 12:56:02 +01:00
cbc6f3b253
hantek-dso: Use message logging helpers.
2013-01-29 12:56:02 +01:00
7d4abe5a77
serial.c: NetBSD doesn't have OFILL.
2013-01-27 01:23:01 +01:00
6a4710fac2
drivers: Trim unused config_get() calls
...
None of the driver config_get/set/list calls are required.
2013-01-25 16:05:48 +01:00
0d485e30c6
Deprecate SR_DI_HWOPTS.
...
This is replaced by SR_CONF_SCAN_OPTIONS.
2013-01-25 15:09:20 +01:00
9a6517d14b
Deprecate SR_DI_HWCAPS.
...
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
c50277a6ec
Deprecate SR_DI_TRIGGER_TYPES.
...
This is replaced by SR_CONF_TRIGGER_TYPE.
2013-01-25 11:52:27 +01:00
328bafabd4
Deprecate SR_DI_TRIGGER_SOURCES.
...
This is replaced by SR_CONF_TRIGGER_SOURCE.
2013-01-25 11:25:32 +01:00
41f5bd09b0
Deprecate SR_DI_TIMEBASES.
...
This is replaced by SR_CONF_TIMEBASE.
2013-01-25 11:22:20 +01:00
6e1fbcc41b
Deprecate SR_DI_FILTERS.
...
This is replaced by SR_CONF_FILTER.
2013-01-25 11:19:12 +01:00
e4f2b2adc1
Deprecate SR_DI_VDIVS.
...
This is replaced by SR_CONF_VDIV.
2013-01-25 11:13:49 +01:00
2a7b113d13
Deprecate SR_DI_COUPLING.
...
This is replaced by SR_CONF_COUPLING.
2013-01-25 11:04:27 +01:00
6d1ceffa95
Deprecate SR_DI_BUFFERSIZES.
...
This is replaced by SR_CONF_BUFFERSIZE.
2013-01-25 10:58:37 +01:00
dd96ea9879
Deprecate SR_DI_PATTERNS.
...
This is replaced by SR_CONF_PATTERN_MODE.
2013-01-25 03:38:44 +01:00
123e131383
Deprecate SR_DI_CUR_SAMPLERATE.
...
This is replaced by SR_CONF_SAMPLERATE.
2013-01-25 03:17:36 +01:00
fbec8bd2f3
deprecate SR_DI_SAMPLERATES
...
This is replaced by a call to config_list() with id SR_CONF_SAMPLERATE.
2013-01-25 02:39:58 +01:00
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
69e19dd769
Always interleave analog data with all enabled probes.
...
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
b1a051544d
serial: more serial processing flags to turn off
2013-01-23 02:32:58 +01:00
431ec7ca4a
uni-t-dmm: use new sr_config struct
2013-01-21 23:40:09 +01:00
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
d8e3685c47
free USB config descriptor after use
2013-01-21 23:32:49 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
86c02e6554
serial.c: Fix copy-paste error.
...
Thanks Bert Vermeulen for reporting.
2013-01-21 01:47:30 +01:00
9d8fde40c3
uni-t-dmm: Quickfix for UNI-T UT61D.
...
This is a temporary fix only, since a major rework of uni-t-dmm is being
done at the moment, soon to be merged.
2013-01-21 01:45:02 +01:00
5edc02c77c
Add missing "ULL" suffixes.
...
These numbers are larger than 32bit, mark them as ULL to avoid compile
failures on 32bit systems.
2013-01-20 20:39:18 +01:00
73365eaed0
uni-t-dmm: Expose hwopts.
2013-01-20 19:57:04 +01:00
388f9d3e25
uni-t-dmm: Fix scanning, properly use new sr_usb_find().
2013-01-20 19:55:33 +01:00
4ebd48b352
Remove non-error hw_info_get() messages.
...
Currently hw_info_get() can receive requests for entries (info_id) that
the specific driver doesn't support. That is (right now) a valid
use-case and not an error (might change later, though).
Thus, for now, don't output messages for such requests at all (certainly
not as sr_err() where they show up in e.g. sigrok-cli output per default).
2013-01-20 18:48:02 +01:00
b97cbca6c9
serial.c: OpenBSD doesn't have B460800.
2013-01-19 15:55:22 +01:00
3d6de074a4
alsa: Silence ALSA scanning process.
...
Errors while opening or configuring ALSA devices during scan for devices
should not be shown by default (i.e., no sr_err() usage). Non-working
or non-accessible devices (due to permissions or other reasons) will
simply not show up in frontends. Use sr_dbg() instead of sr_err().
2013-01-16 00:02:24 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
512bb890df
rigol-ds1xx2: More selective Rigol DS1xx2 scan
...
Patch submitted by Martin Ling.
2013-01-13 22:42:21 +01:00
cbc80f8f8a
fx2lafw: Say if chip is old FX2 or FX2LP
...
Look at the extracted REVID, and print out if it is an FX2 (non-LP), or FX2LP.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-08 03:44:36 +01:00
a24e9d0484
link-mso19: Use more portable g_htons().
...
Not all systems provide <arpa/inet.h> and/or htons(). Use portable and
always available g_htons() from glib instead.
2013-01-08 03:13:45 +01:00
753d722f34
link-mso19: Fix a bunch of compiler warnings.
2013-01-08 03:13:14 +01:00
00b44ccb8b
link-mso19: Fix white-space, cosmetics, coding-style.
...
Fix the bare minumum of whitespace/indentation/coding-style via
automatic 'indent' run, followed by some minor manual fixes.
Some more fixes and cleanups might follow later.
2013-01-08 03:13:08 +01:00
f48cef7897
link-mso19: Fix (C) lines.
...
Bring back the original (C) lines from before the split into api.c
and protocol.[ch].
Add "Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>" since there
were nontrivial changes to those files.
2013-01-08 02:30:40 +01:00
eb913174ab
Added limit samples Eveything seems to work find up to 1024 samples
2013-01-08 01:00:14 +01:00
087a9161ff
Rewrote the trigger config. Added trigger position and trigger slope
2013-01-08 01:00:14 +01:00
5a24e89ca4
Eveything seems to work now except for triggers.
2013-01-08 01:00:14 +01:00
4db2aaffe7
More cleanup. Communication with mso19 is working, but its not triggering. Need to check why.
2013-01-08 01:00:13 +01:00
26ddb5baca
Added flow control to serial configuration to support xon/xoff for link-mso19
2013-01-08 01:00:13 +01:00
4b719338cc
Added missing mso functions
2013-01-08 01:00:13 +01:00
def5c35c4c
Removing the old link-mso19 files and changing makefile
2013-01-08 01:00:13 +01:00
df92e5cf6b
Rewrote the link-mso19.c into api and protocol. Still need to test and cleanup some more
2013-01-08 01:00:13 +01:00
Bert Vermeulen
Uwe Hermann
Alexandru Gagniuc
lelazary