Martin Ling
abc4b3356d
Route sr_source_add for all serial devices through a serial_source_add wrapper.
2013-12-07 19:43:47 +00:00
Martin Ling
8f996b8948
probe_groups: API changes required to implement probe groups.
2013-11-08 01:03:16 +01:00
Uwe Hermann
eea49cf10d
ols/link-mso19: Consistency fixes.
...
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
2013-06-02 17:03:40 +02:00
Uwe Hermann
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
Uwe Hermann
6078d2c996
Use consistent API callback function names.
...
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
Uwe Hermann
decfe89d4e
Drop some lines that are no longer needed.
2013-05-10 18:30:32 +02:00
Uwe Hermann
2a052cc4d6
Use consistent naming for internal libtool helper libs.
...
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
Uwe Hermann
9e165e742f
Use consistent HW_ name prefixes everywhere.
...
Older drivers used LA_* previously, we now use HW_* everywhere though.
2013-05-10 17:18:42 +02:00
Uwe Hermann
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
Uwe Hermann
06c45a66f7
Minor whitespace fixes.
2013-05-03 14:03:49 +02:00
Bert Vermeulen
e73ffd4238
Enforce open device before config_set()/dev_acquisition_start()
2013-04-24 22:03:50 +02:00
Uwe Hermann
31e5377250
Fix minor warning with some compilers.
2013-04-23 22:54:02 +02:00
Uwe Hermann
50985c2019
GPL headers: Use correct project name.
2013-04-23 22:24:30 +02:00
Bert Vermeulen
bd6fbf628a
drivers: return SR_ERR_NA on unsupported config key
...
Fixes bug 89.
2013-04-16 11:00:55 +02:00
Uwe Hermann
ff08a52a0f
Fix two minor compiler warnings.
2013-04-12 17:45:01 +02:00
Bert Vermeulen
a9ed6877f7
link-mso19: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
lelazary
365f04d61f
mso-19: Initial analog probe support (unfinished).
...
- Added the analog probe (unfinished).
- Reset trigger to state to 0 before capture, just incase the scope is in
the middle of a capture.
2013-03-03 17:59:06 +01:00
lelazary
5952553f56
mso-19: Fixed warning.
2013-03-03 17:58:46 +01:00
Uwe Hermann
3e9b7f9c77
Rename session_dev_id to cb_data everywhere.
...
We use 'cb_data' in all drivers these days, make the few remaining ones
that use 'session_dev_id' consistent.
2013-02-07 11:26:02 +01:00
Uwe Hermann
4afdfd4628
Add and use std_session_send_df_header().
...
This is a small helper function which sends the SR_DF_HEADER packet that
drivers usually emit in their hw_dev_acquisition_start() API callback.
It simplifies and shortens the hw_dev_acquisition_start() functions
quite a bit.
It also simplifies the input modules which send an SR_DF_HEADER packet, too.
This patch also automatically removes some unneeded malloc/free in some
drivers for the 'packet' and 'header' structs used for SR_DF_HEADER.
2013-02-07 10:46:28 +01:00
Uwe Hermann
0e94d524c1
Shorten/simplify hw_dev_list() implementations.
2013-02-05 18:27:05 +01:00
Uwe Hermann
d3b38ad389
Drivers: Explicitly list sr_samplerates fields.
...
This makes it a bit easier to understand which value means what, just
from looking at the driver code.
2013-01-29 12:56:02 +01:00
Uwe Hermann
063e7aef6d
Factor out common hw_init() driver code.
...
Most drivers do pretty much the same things in their hw_init()
right now, so factor out that code to std_hw_init() in std.c.
2013-01-29 12:56:02 +01:00
Bert Vermeulen
9a6517d14b
Deprecate SR_DI_HWCAPS.
...
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
Bert Vermeulen
c50277a6ec
Deprecate SR_DI_TRIGGER_TYPES.
...
This is replaced by SR_CONF_TRIGGER_TYPE.
2013-01-25 11:52:27 +01:00
Bert Vermeulen
123e131383
Deprecate SR_DI_CUR_SAMPLERATE.
...
This is replaced by SR_CONF_SAMPLERATE.
2013-01-25 03:17:36 +01:00
Bert Vermeulen
fbec8bd2f3
deprecate SR_DI_SAMPLERATES
...
This is replaced by a call to config_list() with id SR_CONF_SAMPLERATE.
2013-01-25 02:39:58 +01:00
Bert Vermeulen
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
Bert Vermeulen
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
Bert Vermeulen
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
Bert Vermeulen
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
Bert Vermeulen
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
Uwe Hermann
a24e9d0484
link-mso19: Use more portable g_htons().
...
Not all systems provide <arpa/inet.h> and/or htons(). Use portable and
always available g_htons() from glib instead.
2013-01-08 03:13:45 +01:00
Uwe Hermann
753d722f34
link-mso19: Fix a bunch of compiler warnings.
2013-01-08 03:13:14 +01:00
Uwe Hermann
00b44ccb8b
link-mso19: Fix white-space, cosmetics, coding-style.
...
Fix the bare minumum of whitespace/indentation/coding-style via
automatic 'indent' run, followed by some minor manual fixes.
Some more fixes and cleanups might follow later.
2013-01-08 03:13:08 +01:00
Uwe Hermann
f48cef7897
link-mso19: Fix (C) lines.
...
Bring back the original (C) lines from before the split into api.c
and protocol.[ch].
Add "Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>" since there
were nontrivial changes to those files.
2013-01-08 02:30:40 +01:00
lelazary
eb913174ab
Added limit samples Eveything seems to work find up to 1024 samples
2013-01-08 01:00:14 +01:00
lelazary
087a9161ff
Rewrote the trigger config. Added trigger position and trigger slope
2013-01-08 01:00:14 +01:00
lelazary
5a24e89ca4
Eveything seems to work now except for triggers.
2013-01-08 01:00:14 +01:00
lelazary
4db2aaffe7
More cleanup. Communication with mso19 is working, but its not triggering. Need to check why.
2013-01-08 01:00:13 +01:00
lelazary
4b719338cc
Added missing mso functions
2013-01-08 01:00:13 +01:00
lelazary
def5c35c4c
Removing the old link-mso19 files and changing makefile
2013-01-08 01:00:13 +01:00
lelazary
df92e5cf6b
Rewrote the link-mso19.c into api and protocol. Still need to test and cleanup some more
2013-01-08 01:00:13 +01:00
Uwe Hermann
7869340103
Shorten probe_names[] arrays everywhere.
...
Also, NULL-terminate all of them.
2012-12-26 00:16:07 +01:00
Peter Stuge
34f06b903e
Add a struct sr_context * parameter to hw_init()
2012-12-03 12:07:40 +01:00
Uwe Hermann
a54dd31e38
serial: Use OS-independent flags for serial port opening.
...
Add SERIAL_RDWR, SERIAL_RDONLY, and SERIAL_NONBLOCK (for now), which are
mapped to the respective OS-specific mechanism in serial_open().
2012-12-02 12:45:54 +01:00
Uwe Hermann
64d33dc28e
All drivers: Drop unneeded comments.
2012-11-11 18:09:11 +01:00
Uwe Hermann
56eb9f95ba
link-mso19: Use message logging helpers.
2012-11-10 19:42:37 +01:00
Bert Vermeulen
61136ea603
sr: add new driver API call: scan()
...
This changes the semantics of the init() call as well. That now only
initializes the driver -- an administrative affair, no hardware gets
touched during this call. It returns a standard SR_OK or SR_ERR* code.
The scan() call does a discovery run for devices it knows, and returns
the number found. It can be called at any time.
2012-08-03 10:27:36 +02:00
Bert Vermeulen
40dda2c3a5
sr: remove unused argument from hardware driver function init()
...
It was actually used in one way: the session file loaded abused it for
passing in the filename -- something it definitely wasn't intended for.
This now uses the proper way to pass arguments to a driver: the new
SR_HWCAP_SESSIONFILE.
The OLS driver could also use it as an indication of the serial port to
use instead of actively probing all serial ports on the system, but there
wasn't any frontend code that passed in such a parameter, making it
entirely useless. That will soon be handled differently with the new
scan() API call, regardless.
2012-08-03 10:27:36 +02:00