b95dd7619d
log prefixes: Cosmetics, consistency fixes, typo fixes.
2013-12-27 13:17:20 +01:00
3544f848e0
Centralise duplicated logging helper defines.
2013-12-27 12:54:05 +01:00
bf2c987fde
Use std_serial_dev_close() to replace matching dev_close functions.
2013-12-07 19:43:47 +00:00
7faa3e8821
Route sr_source_remove for all serial devices through a wrapper.
2013-12-07 19:43:47 +00:00
abc4b3356d
Route sr_source_add for all serial devices through a serial_source_add wrapper.
2013-12-07 19:43:47 +00:00
8f996b8948
probe_groups: API changes required to implement probe groups.
2013-11-08 01:03:16 +01:00
eea49cf10d
ols/link-mso19: Consistency fixes.
...
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
2013-06-02 17:03:40 +02:00
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
6078d2c996
Use consistent API callback function names.
...
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
decfe89d4e
Drop some lines that are no longer needed.
2013-05-10 18:30:32 +02:00
2a052cc4d6
Use consistent naming for internal libtool helper libs.
...
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
9e165e742f
Use consistent HW_ name prefixes everywhere.
...
Older drivers used LA_* previously, we now use HW_* everywhere though.
2013-05-10 17:18:42 +02:00
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
06c45a66f7
Minor whitespace fixes.
2013-05-03 14:03:49 +02:00
e73ffd4238
Enforce open device before config_set()/dev_acquisition_start()
2013-04-24 22:03:50 +02:00
31e5377250
Fix minor warning with some compilers.
2013-04-23 22:54:02 +02:00
50985c2019
GPL headers: Use correct project name.
2013-04-23 22:24:30 +02:00
bd6fbf628a
drivers: return SR_ERR_NA on unsupported config key
...
Fixes bug 89.
2013-04-16 11:00:55 +02:00
ff08a52a0f
Fix two minor compiler warnings.
2013-04-12 17:45:01 +02:00
a9ed6877f7
link-mso19: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
365f04d61f
mso-19: Initial analog probe support (unfinished).
...
- Added the analog probe (unfinished).
- Reset trigger to state to 0 before capture, just incase the scope is in
the middle of a capture.
2013-03-03 17:59:06 +01:00
5952553f56
mso-19: Fixed warning.
2013-03-03 17:58:46 +01:00
3e9b7f9c77
Rename session_dev_id to cb_data everywhere.
...
We use 'cb_data' in all drivers these days, make the few remaining ones
that use 'session_dev_id' consistent.
2013-02-07 11:26:02 +01:00
4afdfd4628
Add and use std_session_send_df_header().
...
This is a small helper function which sends the SR_DF_HEADER packet that
drivers usually emit in their hw_dev_acquisition_start() API callback.
It simplifies and shortens the hw_dev_acquisition_start() functions
quite a bit.
It also simplifies the input modules which send an SR_DF_HEADER packet, too.
This patch also automatically removes some unneeded malloc/free in some
drivers for the 'packet' and 'header' structs used for SR_DF_HEADER.
2013-02-07 10:46:28 +01:00
0e94d524c1
Shorten/simplify hw_dev_list() implementations.
2013-02-05 18:27:05 +01:00
d3b38ad389
Drivers: Explicitly list sr_samplerates fields.
...
This makes it a bit easier to understand which value means what, just
from looking at the driver code.
2013-01-29 12:56:02 +01:00
063e7aef6d
Factor out common hw_init() driver code.
...
Most drivers do pretty much the same things in their hw_init()
right now, so factor out that code to std_hw_init() in std.c.
2013-01-29 12:56:02 +01:00
9a6517d14b
Deprecate SR_DI_HWCAPS.
...
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
c50277a6ec
Deprecate SR_DI_TRIGGER_TYPES.
...
This is replaced by SR_CONF_TRIGGER_TYPE.
2013-01-25 11:52:27 +01:00
123e131383
Deprecate SR_DI_CUR_SAMPLERATE.
...
This is replaced by SR_CONF_SAMPLERATE.
2013-01-25 03:17:36 +01:00
fbec8bd2f3
deprecate SR_DI_SAMPLERATES
...
This is replaced by a call to config_list() with id SR_CONF_SAMPLERATE.
2013-01-25 02:39:58 +01:00
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
a24e9d0484
link-mso19: Use more portable g_htons().
...
Not all systems provide <arpa/inet.h> and/or htons(). Use portable and
always available g_htons() from glib instead.
2013-01-08 03:13:45 +01:00
753d722f34
link-mso19: Fix a bunch of compiler warnings.
2013-01-08 03:13:14 +01:00
00b44ccb8b
link-mso19: Fix white-space, cosmetics, coding-style.
...
Fix the bare minumum of whitespace/indentation/coding-style via
automatic 'indent' run, followed by some minor manual fixes.
Some more fixes and cleanups might follow later.
2013-01-08 03:13:08 +01:00
f48cef7897
link-mso19: Fix (C) lines.
...
Bring back the original (C) lines from before the split into api.c
and protocol.[ch].
Add "Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>" since there
were nontrivial changes to those files.
2013-01-08 02:30:40 +01:00
eb913174ab
Added limit samples Eveything seems to work find up to 1024 samples
2013-01-08 01:00:14 +01:00
087a9161ff
Rewrote the trigger config. Added trigger position and trigger slope
2013-01-08 01:00:14 +01:00
5a24e89ca4
Eveything seems to work now except for triggers.
2013-01-08 01:00:14 +01:00
4db2aaffe7
More cleanup. Communication with mso19 is working, but its not triggering. Need to check why.
2013-01-08 01:00:13 +01:00
4b719338cc
Added missing mso functions
2013-01-08 01:00:13 +01:00
def5c35c4c
Removing the old link-mso19 files and changing makefile
2013-01-08 01:00:13 +01:00
df92e5cf6b
Rewrote the link-mso19.c into api and protocol. Still need to test and cleanup some more
2013-01-08 01:00:13 +01:00
7869340103
Shorten probe_names[] arrays everywhere.
...
Also, NULL-terminate all of them.
2012-12-26 00:16:07 +01:00
34f06b903e
Add a struct sr_context * parameter to hw_init()
2012-12-03 12:07:40 +01:00
a54dd31e38
serial: Use OS-independent flags for serial port opening.
...
Add SERIAL_RDWR, SERIAL_RDONLY, and SERIAL_NONBLOCK (for now), which are
mapped to the respective OS-specific mechanism in serial_open().
2012-12-02 12:45:54 +01:00
Uwe Hermann
Martin Ling
Bert Vermeulen
lelazary
Peter Stuge