BLAHAJ
/
libsigrok
10
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
2,064 Commits 3 Branches 14 Tags 10 MiB
Commit Graph

1307 Commits

Author SHA1 Message Date
Martin Ling 3182932d36 Use accessor for new libserialport opaque port structure. 2013-11-26 15:53:40 +01:00
Bert Vermeulen 79b9a237bd uni-t-dmm: Drop unnecessary DMM count. 2013-11-23 15:24:40 +01:00
Bert Vermeulen 5e1f7c890d uni-t-dmm: Add support for the Tenma 72-7745. 
This is a rebadged UNI-T UT60E.
 2013-11-23 12:50:33 +01:00
Uwe Hermann a147c7b416 hantek-dso: config_list(): Only SR_CONF_BUFFERSIZE needs sdi. 2013-11-22 22:31:24 +01:00
Uwe Hermann 7c07a1783e ols: config_list(): Handle SR_CONF_PATTERN_MODE. 
SR_CONF_PATTERN_MODE was not handled in config_list(), yielding
non-working OLS support in PulseView (due to an assert), and a missing
pattern list in sigrok-cli's --show output.

This fixes bug #184.
 2013-11-22 22:31:08 +01:00
Matthias Heidbrink f57924179d gmc_mh_1x_2x: Completed driver for Metrahit 1x/2x 
This driver supports devices with “RS232“ interface (Metrahit 16I,
18S, Siemens B1105 tested, 29S incomplete).
 2013-11-22 02:42:04 +01:00
Matthias Heidbrink a970522b6d serial: Allow 5 and 6 data bits. 2013-11-22 02:31:17 +01:00
Matthias Heidbrink 7b4edcb654 gmc_mh_1x_2x: Inital driver skeleton. 2013-11-22 02:31:17 +01:00
Martin Ling 13cd8197eb Update for libserialport v0.1 API. 2013-11-22 02:14:16 +01:00
Bert Vermeulen c4650aca12 Suppress compile warning 2013-11-20 22:06:01 +01:00
Uwe Hermann 61bab807f4 DT4000ZC/TP4000ZC: Force DTR=1 on the serial port. 
This fixes the driver e.g. on NetBSD.
 2013-11-20 00:42:08 +01:00
Uwe Hermann 4403c39fe4 ols: Always open serial port in nonblocking mode. 
The scan() function was opening the port in non-blocking mode, the dev_open()
function however was not using the SERIAL_NONBLOCK flag. This led to hangs
in certain situations.

This fixes the OLS e.g. on NetBSD.
 2013-11-19 23:22:46 +01:00
Uwe Hermann 1a54044299 serial.c: Minor cosmetic fix. 2013-11-19 20:09:59 +01:00
Martin Ling a82635f252 Use new sp_port_config fields. 2013-11-19 14:26:18 +01:00
Martin Ling e385e2ed90 serial: Use new sp_set_config instead of sp_set_params. 2013-11-19 14:26:18 +01:00
poljar (Damir Jelić) 066d42b1c8 serial: Fix leak in serial_open. 
A new sp_port is created every time we call serial_open (sp_get_port_by_name
implicitly creates one for us), so free it every time we call serial_close.
 2013-11-19 10:29:24 +01:00
poljar (Damir Jelić) 1130e4229b rigol-ds1xx2: Send a SR_DF_END packet before acquisition stop. 
Without a SR_DF_END samples could be cached in the internal buffer of an output
module and never flushed, therefore they would be missing in the final output.

By sending a SR_DF_END packet we force the output to be flushed.
 2013-11-15 17:00:07 +01:00
Uwe Hermann 449cc16bb2 serial.c: Temporary quickfix until a libserialport fix is done. 2013-11-15 12:23:09 +01:00
Uwe Hermann 26e0361cc6 uni-t-dmm: Drop unused packet_request callback. 2013-11-15 09:36:51 +01:00
Uwe Hermann c4f2dfd0f0 configure.ac: libserialport is optional. 
Disable drivers that need serial port support if libserialport is not found.

Also, disable building various other serial port related code in that case.
 2013-11-15 09:36:51 +01:00
Uwe Hermann 6a76efebc1 serial.c: Fix a few return values. 2013-11-14 23:48:28 +01:00
Uwe Hermann a0dfaa6c4c serial.c: Cosmetics, coding-style. 2013-11-14 23:48:28 +01:00
Martin Ling 0d4405ce5e Update for renamed libserialport header file. 2013-11-14 23:48:16 +01:00
Martin Ling c9bc57b6bc Update to new libserialport API. 2013-11-14 23:48:16 +01:00
Martin Ling a9bce5a561 Use libserialport for serial port access. 2013-11-14 23:48:16 +01:00
Bert Vermeulen 58f4336963 rigol-ds1xx2: Unbreak listing of _VDIV and _COUPLING 2013-11-08 01:03:19 +01:00
Bert Vermeulen 5f77dffc02 rigol-ds1xx2: Unbreak listing of SR_CONF_DEVICE_OPTIONS 2013-11-08 01:03:19 +01:00
Bert Vermeulen be60a9e4a9 rigol-ds1xx2: Better error reporting when probe groups are required 2013-11-08 01:03:19 +01:00
Bert Vermeulen 78bcc55afa rigol-ds1xx2: Minor coding style fixes 2013-11-08 01:03:19 +01:00
Bert Vermeulen d3c74a6fb0 probe_groups: API changes required to implement probe groups. 2013-11-08 01:03:18 +01:00
Bert Vermeulen ba358ffd83 rigol-ds1xx2: fix bitrot in device cleanup code 2013-11-08 01:03:18 +01:00
Bert Vermeulen e43fdd8d4f rigol-ds1xx2: Don't assume valid sdi 2013-11-08 01:03:18 +01:00
Bert Vermeulen 45311368de rigol-ds1xx2: Skip obsolete fields 2013-11-08 01:03:18 +01:00
Martin Ling f48e0249b4 rigol-ds1xx2: implement probe group specific options. 2013-11-08 01:03:17 +01:00
Martin Ling 3d3a601e80 rigol-ds1xx2: create probe groups. 2013-11-08 01:03:17 +01:00
Martin Ling 8f996b8948 probe_groups: API changes required to implement probe groups. 2013-11-08 01:03:16 +01:00
Dan Horák b775d753e3 rigol-ds1xx2: detect Rigol DS1xx2 with upgraded bandwith 
The bandwith in Rigol DS1xx2D/E scopes can be upgraded to 150 MHz in software.
So detect also scopes with the upgraded bandwith.

using libsigrok-0.2.1 + this change + commit da970d24ec (required for newer kernels):

[dan@eagle sigrok]$ sigrok-cli --scan -d rigol-ds1xx2 -l 5
sr: libsigrok loglevel set to 5.
sr: Sanity-checking all drivers.
sr: Sanity-checking all input modules.
sr: Sanity-checking all output modules.
srd: libsigrokdecode loglevel set to 5.
sr: hwdriver: Initializing driver 'rigol-ds1xx2'.
sr: serial: Opening serial port '/dev/usbtmc0' (flags 1).
sr: serial: Opened serial port '/dev/usbtmc0' (fd 7).
sr: serial: Wrote 5/5 bytes (fd 7).
sr: serial: Closing serial port /dev/usbtmc0 (fd 7).
sr: rigol-ds1xx2: response: /dev/usbtmc0 [Rigol Technologies,DS1152D,DS1EU150XXXXXX,00.04.01.00.02]
sr: hwdriver: Scan of 'rigol-ds1xx2' found 1 devices.
The following devices were found:
rigol-ds1xx2 - Rigol Technologies DS1152D 00.04.01.00.02 with 18 probes: CH1 CH2 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15
 2013-11-03 14:20:47 +01:00
Uwe Hermann 3a8cad9137 metex14: Handle a few missing cases for overflow. 2013-10-31 13:47:30 +01:00
Uwe Hermann 88f544f27e Add support for the Metex M-4650CR. 
(the Voltcraft M-4650CR is a rebadged Metex M-4650CR)
 2013-10-30 14:44:44 +01:00
Uwe Hermann 2b83d7fee1 Add support for the Voltcraft M-4650CR. 2013-10-30 14:44:44 +01:00
Uwe Hermann e790bd5cda norma-dmm: Minor cosmetics, coding-style, consistency fixes. 
Also, add a missing "%" in an sr_err() and a missing parameter in
another sr_err().
 2013-10-25 21:25:26 +02:00
Matthias Heidbrink f8e76e2e74 norma dmm: Implemented driver. 2013-10-25 21:25:26 +02:00
Matthias Heidbrink bfd48770fc norma dmm: Initial driver skeleton. 2013-10-25 21:25:26 +02:00
Matthias Heidbrink 50a9aba21b serial: Removed flag OPOST (turn off all output processing). 2013-10-25 19:11:15 +02:00
Matthias Heidbrink a510d55571 serial: Added flags CLOCAL (ignore modem status lines) and CREAD (start receiver). 2013-10-25 19:11:15 +02:00
Matthias Heidbrink 1b943b6d8b serial: Added flag IXANY (any char will restart) to XON/XOFF handshaking. 2013-10-25 19:11:14 +02:00
Sean Young 0c30b35fce saleae-logic16: claim device before using it 
The kernel warns:

[ 7461.925685] usb 2-4: usbfs: process 11303 (sigrok-cli) did not claim interface 0 before use
 2013-10-24 16:01:46 +01:00
Aurelien Jacobs 5542bee61b teleinfo: actual parser implementation 2013-10-24 15:41:11 +01:00
Aurelien Jacobs 8e796cb438 teleinfo: Initial driver skeleton. 2013-10-24 15:41:11 +01:00
Uwe Hermann c02dc3e261 metex14: Add support for pF (picofarad). 
This is used on some Metex DMMs.
 2013-10-23 18:41:13 +02:00
Uwe Hermann ee6cb5a417 metex14: Use case-insensitive string compares. 
This allows some other DMMs to be supported that use e.g. "kOhm" vs.
"KOhm", and so on.
 2013-10-23 18:07:54 +02:00
Uwe Hermann 1a807c13fc metex14: Support DMMs with slightly different protocol. 
This adds support for DMMs with 5 digits in the protocol (instead of 4)
and some more whitespace variants.
 2013-10-23 18:06:15 +02:00
Uwe Hermann 71f1302b4b metex14: Support DMMs with whitespace differences. 
Most Metex DMMs use e.g. "  mV" as unit field, others use "mV  ",
though. Support these (and other) whitespace variants by stripping all
spaces and only comparing non-space characters.
 2013-10-23 17:31:14 +02:00
Matthias Heidbrink b21d7eebe2 serial: Changed order of flags PARENB and PARODD in deletion to same order as in setting (cosmetic). 2013-10-18 16:58:33 +02:00
Aurelien Jacobs df6b0f99af ISO-TECH IDM103N: remove the useless -ser postfix 2013-10-13 14:54:54 +02:00
Aurelien Jacobs 94e9021b3e es519xx: correct initialization of es519xx_info structure 2013-10-13 14:54:54 +02:00
Uwe Hermann 93d719cde6 es519xx: Fix incorrect packet size, and a typo. 2013-10-07 00:36:18 +02:00
Uwe Hermann 72e1672fc9 es519xx: Cosmetics, coding style, minor fixes. 2013-10-07 00:36:18 +02:00
Aurelien Jacobs de737bfc11 add ISO-TECH IDM103N serial-dmm driver 2013-10-07 00:36:18 +02:00
Aurelien Jacobs c01bdebc57 add cyrustek es519xx generic protocol parser 2013-10-07 00:36:18 +02:00
Uwe Hermann 2f9376117c fx2lafw: Organize driver into api.c / protocol.[ch]. 
This now matches the naming conventions of the other drivers.
 2013-10-06 22:28:45 +02:00
Daniel Thompson fbf07e0209 agilent-dmm: Fix SEGV during incomplete reply from meter. 
If buf contains exactly the string "Agilent Technologies" (for example if
there are bugs in the timeout logic or serial driver causing the reply from
the meter to be abridged) then this code will SEGV. This is because tokens[1]
is NULL but only tokens[2] and tokens[3] (both of which are undefined) are
NULL checked.

Can be trivially corrected by NULL checking tokens[1] as well.

Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
 2013-10-04 13:30:49 +02:00
Daniel Thompson 5715e84fe3 serial: Only sleep when no characters are received. 
g_usleep(XX) sleeps for *at least* XX microseconds but may sleep for
longers (on older kernels the sleep will typically be 10000us). Thus
byte receive loops containing an unconditional sleep will perform
very poorly (for example it causes the scan in agilent-dmm to timeout
prematurely).

Even on modern kernels serial_readline() has a 2ms sleep per byte which
means it will read at a maximum rate of half a character per millisecond
(~4800baud).

This is fixed by only sleeping when read() returns no data.

Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
 2013-09-26 14:57:37 +02:00
Uwe Hermann 45c0841b25 uni-t-ut32x: Shorten dev_list(). 2013-09-25 14:26:35 +02:00
Matt Ranostay 6ebe003985 ols: fixed demux mode disable noise filter 
Demux flag wasn't getting set off if one non-demux sample was ran
beforehand.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-09-07 20:17:16 +02:00
Matt Ranostay 6a53bde671 ols: Moved FLAG_FILTER to demux check 
Demux mode was having filter mode set which it doesn't
support per FPGA demon core docs.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-09-06 11:42:25 +02:00
Uwe Hermann e52bb9be83 Voltcraft VC-830: Fix diode mode handling. 
This DMM is not using the standard bits in the FS9922 protocol/structure
to indicate the "volt" and "diode mode" flags. Instead, it only sets the
user-defined bit "z1" to indicate both "diode mode" and "volt".

This fixes #142.
 2013-09-01 15:27:21 +02:00
Uwe Hermann a6ed50f405 es51922/fs9721/fs9922/metex14: Use diode MQFLAG. 
This fixes #141.
 2013-09-01 15:27:07 +02:00
Uwe Hermann 98494dc8a3 fs9922: Fix typo. 2013-09-01 13:41:13 +02:00
Uwe Hermann 045e9a9918 serial.c: Drop unneeded <glob.h>. 
This is no longer used, and also it is not available on Android and thus
breaks cross-compilation for Android.

Thanks Marcus Comstedt <marcus@mc.pp.se> for reporting.
 2013-08-30 16:35:56 +02:00
Matt Ranostay b1de040700 ols: fixed channel limit check 
For demux mode we half the channels. Previous check method broke
the OLS randomly and but it in a bad state.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-30 13:58:36 +02:00
Bert Vermeulen da970d24ec rigol-ds1xx2: newer Linux kernels have USBTMC in /sys/class/usbmisc 2013-08-30 13:57:45 +02:00
Matt Ranostay f51acd69d7 ols: combine demux samples 
demux mode allows DDR sampling which disables group 2 & 3
and thus samples group 0 & 1 to sample on rising and falling of
the clock.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-28 10:21:59 +02:00
Matt Ranostay 7b0a57fd1c ols: add swap channels feature 
Allow channel groups to be swapped. This is useful
for demux at 200mhz with the unbuffered channels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-28 10:21:59 +02:00
Matt Ranostay de52409982 ols: Display noise filter flag 
Show if noise filter is on. This is important to be
sure is off for demux mode.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-28 10:21:59 +02:00
Bert Vermeulen 00d04d3b0e ols: Fix RLE count handling 
The high bit of the sample, denoting this is a count, was not getting
properly cleared. This resulted in an inevitably negative count, and
corruption of the sample buffer before it was transferred to the
frontend.
 2013-08-27 00:33:20 +02:00
Bert Vermeulen abb39e6b8c ols: Properly initialize entire single-sample buffer before start 
The single sample buffer, up to 4 bytes long, was not getting initialized
on (every) acquisition start, only after the first full sample was in.
This caused the first sample to potentially hold garbage.
 2013-08-26 23:42:09 +02:00
Matt Ranostay eb1b610b12 ols: add external clock support 
Add external clock support that allows you to use the tracing
targets bus clock line for sampling.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-26 10:28:45 +02:00
Matt Ranostay 967760a893 ols: add test mode support 
ols allows both external and internal test patterns at ~20khz
which are helpful for unit tests and demos.

pattern=internal -> route pattern internally to all 32 pins
                      (input otherwise disabled)

pattern=external -> generates pattern on unbuffered pins 16:31
                      (which can be looped back to the buffered pins 0:15)

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-26 09:52:24 +02:00
Matt Ranostay 503133bb5f ols: fixed parallel stage triggers 
Stage count was always getting incremented one more than
actual stages, and this caused a extra stage with zero'ed data
probe lines to have the start bit field.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
 2013-08-26 09:48:41 +02:00
Uwe Hermann d0107565c1 saleae-logic16: Drop unneeded NUM_PROBES. 2013-08-21 11:41:21 +02:00
Uwe Hermann 87b537ced0 saleae-logic16: Shorten dev_list() implementation. 2013-08-21 11:37:40 +02:00
Uwe Hermann 96484e22b4 saleae-logic16: Whitespace fixes, cosmetics. 2013-08-21 11:33:37 +02:00
Marcus Comstedt 186dde8d72 saleae-logic16: Cleanup the prime_fpga function 
The driver should now work on any Logic16.
 2013-08-20 19:55:57 +02:00
Marcus Comstedt fec7aa6a44 saleae-logic16: Update copyright blurbs. 
Copied copyright lines from fx2lafw driver, since much of the code is
taken from there.
 2013-08-20 19:55:57 +02:00
Marcus Comstedt db11d7d2d0 saleae-logic16: Add voltage threshold conf. 2013-08-20 19:55:57 +02:00
Marcus Comstedt b117363ad7 saleae-logic16: Declare confs. 2013-08-20 19:55:57 +02:00
Marcus Comstedt 7b5daad45c saleae-logic16: Implemented acquisition. 2013-08-20 19:55:57 +02:00
Marcus Comstedt 15abcf0f58 saleae-logic16: Initialize the FPGA. 
The map_eeprom_data function is currently unknown.  The map entries
provided were observed via bus-snooping of the vendor software on my
device.  Other devices may need additional values.
 2013-08-20 19:55:57 +02:00
Marcus Comstedt 5eea4305ad saleae-logic16: Reworked scan/open to handle FW upload. 
The new code is based on code from the fx2lafw driver.
 2013-08-20 19:55:57 +02:00
Marcus Comstedt f6a21fa50c saleae-logic16: Detect the hardware. 2013-08-20 19:55:57 +02:00
Marcus Comstedt c463dcf06c saleae-logic16: Initial driver skeleton. 2013-08-20 19:55:22 +02:00
Bert Vermeulen 56e76981bc uni-t-dmm: Require conn parameter for scan 
Since the uni-t-ut32x series handles devices with the same USB VID.PID,
which is linked to the WCH CH9325 USB/HID-UART interface chip, this
driver can no longer assume it can handle anything with this VID.PID.
 2013-08-11 10:52:43 +02:00
Bert Vermeulen d6ff054ae5 uni-t-ut32x: Full acquisition support 2013-08-11 10:46:36 +02:00
Bert Vermeulen 6513f97fbe uni-t-ut32x: Flesh out driver 2013-08-11 10:46:36 +02:00
Bert Vermeulen 3877dde43a uni-t-ut32x: Initial driver skeleton. 2013-08-11 10:46:36 +02:00
Uwe Hermann 4a8bbed76d center-3xx: Initial Center 309 / Voltcraft K204 support. 2013-08-08 19:59:49 +02:00
Uwe Hermann 4433145f48 center-3xx: Initial driver skeleton. 2013-08-08 19:58:48 +02:00
Uwe Hermann ce95428cca Consistent use of "IKALOGIC" spelling. 
The company name is written all-caps pretty consistently on the
vendor website and docs, so use that spelling everywhere.
 2013-08-07 16:21:57 +02:00
Uwe Hermann b07b42f319 Cosmetics, typos. 2013-08-07 16:21:57 +02:00
Uwe Hermann e11a1ebacc alsa: Fix double-free issue. 
This fixes bug #129.
 2013-08-07 16:21:56 +02:00
Uwe Hermann 4d7ddff75b uni-t-dmm: Fix UT61E bug related to the UNI-T UD-D04 cable. 
This fixes bug #136.
 2013-08-06 23:36:16 +02:00
Uwe Hermann c51bbdec34 Drop nexus-osciprime skeleton for now. 
This is mostly just a skeleton driver framework at the moment, we'll
bring it back when the driver is fully implemented.
 2013-08-05 12:59:23 +02:00
Uwe Hermann c93ebace30 uni-t-dmm: Drop DMM table (comment). 
This info is in the wiki already, no need to duplicate in the code.
 2013-08-02 01:02:03 +02:00
Bert Vermeulen faf720246a ols: Workaround for mac os X stray events 2013-08-01 19:48:07 +02:00
Uwe Hermann ce4d26ddf9 Various cosmetics, whitespace, consistency fixes. 2013-07-31 13:09:48 +02:00
Uwe Hermann 2b691be806 serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060. 
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).

However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
 2013-07-18 12:43:07 +02:00
Bert Vermeulen e84e0096db Fix build 2013-07-16 17:18:20 +02:00
Bert Vermeulen b979d0c9cb kecheng-kc-330b: Code cleanup 2013-07-16 17:17:54 +02:00
Bert Vermeulen d406dccd6a lascar-el-usb: Don't close device after acquisition 2013-07-16 16:08:38 +02:00
Bert Vermeulen 85ed4ab3ba kecheng-kc-330b: Acquisition from stored logs 2013-07-16 16:08:38 +02:00
Bert Vermeulen f336618c3d kecheng-kc-330b: Check device status before acquisition 
Can't really count on it either way though, the device is just
too flaky to conclude whether it's going to work or not, regardless
of the status returned.
 2013-07-16 16:08:38 +02:00
Bert Vermeulen df03552894 kecheng-kc-330b: Live SPL acquisition 2013-07-16 16:08:38 +02:00
Bert Vermeulen bc7be4a9f4 kecheng-kc-330b: Implement all SR_CONF options 2013-07-16 16:08:38 +02:00
Bert Vermeulen a8806f032c kecheng-kc-330b: Flesh out driver, add scan functionality 2013-07-16 16:08:38 +02:00
Bert Vermeulen ed759a0835 kecheng-kc-330b: Initial driver skeleton. 2013-07-16 16:08:38 +02:00
Uwe Hermann ab4bb6eb7c ikalogic-scanaplus: Initial driver implementation. 2013-07-16 01:01:11 +02:00
Uwe Hermann fdf4a1f5a0 ikalogic-scanaplus: Initial driver skeleton. 2013-07-15 12:20:53 +02:00
Florian Knodt a7a163a795 Support for UNI-T UT60A/E multimeters via RS232 or USB 2013-07-09 22:57:55 +02:00
Marc Schink fb8d593cfe Use GET_REPORT request for device to host transfer. 2013-07-05 14:01:06 +02:00
Uwe Hermann c134574938 uni-t-dmm: Add support for the Voltcraft VC-830. 2013-06-23 10:23:21 +02:00
Uwe Hermann 6045b91aa4 serial-dmm: Add support for the Voltcraft VC-830. 2013-06-23 10:23:21 +02:00
Bert Vermeulen cea26f6e9f cem-dt-885x: Support for retrieving stored samples 2013-06-20 14:35:34 +02:00
Bert Vermeulen 662172d4f4 cem-dt-885x: Support for SR_CONF_DATA_SOURCE 
This device can do both live and memory-based acquisition.
 2013-06-19 12:23:30 +02:00
Bert Vermeulen 4c22355f04 cem-dt-885x: Support for powering off the device 2013-06-17 16:17:39 +02:00
Bert Vermeulen f157b2eebb cem-dt-885x: Support for sound pressure level measurement range 2013-06-17 16:17:39 +02:00
Bert Vermeulen 0cd9107dfb cem-dt-885x: Fix datalog on/off setting in max/min hold mode 
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
 2013-06-17 16:17:39 +02:00
Bert Vermeulen a90e480cdc cem-dt-885x: Support for max/min hold modes 2013-06-17 16:17:39 +02:00
Bert Vermeulen 1487ce4fbc cem-dt-885x: Support for changing time weighting 2013-06-17 16:17:39 +02:00
Bert Vermeulen be73391982 cem-dt-885x: Support for changing frequency weighting 2013-06-17 16:17:39 +02:00
Bert Vermeulen e1af0e85b9 cem-dt-885x: Support for turning data logging on/off 2013-06-17 16:17:38 +02:00
Florian Steinhardt 5f2a4aff4b added Voltcraft M-3650D Multimeter 2013-06-14 01:03:29 +02:00
Bert Vermeulen 14cf708fef cem-dt-885x: Send last measurement at normal rate in hold mode 
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
 2013-06-12 18:34:42 +02:00
Bert Vermeulen bc1143280f cem-dt-885x: Hold off measurements in max/min hold mode 2013-06-12 18:34:42 +02:00
Bert Vermeulen e37c4b3959 cem-dt-885x: Live SPL acquisition 2013-06-12 18:34:42 +02:00
Bert Vermeulen 7fb8279c9b cem-dt-885x: Flesh out driver, add scan functionality 2013-06-12 18:34:42 +02:00
Bert Vermeulen 8fa9368eb4 cem-dt-885x: Initial driver skeleton. 2013-06-12 18:34:42 +02:00
Uwe Hermann 28083961fb scanalogic2: Only print actual state changes in the log. 2013-06-11 18:39:55 +02:00
Uwe Hermann 9526f2d4f8 scanalogic2: Replace %i with %s where needed. 2013-06-11 18:39:54 +02:00
Uwe Hermann 79914b3a62 scanalogic2: Shorten a few function name prefixes. 
The driver-private helper functions in protocol.c can have a shorter
prefix to make the code look nicer.
 2013-06-11 18:39:54 +02:00
Uwe Hermann c824eb6323 scanalogic2: Cosmetics, whitespace, typos, etc. 2013-06-11 18:39:54 +02:00
Marc Schink e52e712d05 Initial driver for IKALOGIC Scanalogic-2 2013-06-11 18:39:54 +02:00
Marc Schink 16e76baec9 ikalogic-scanalogic2: Initial driver skeleton. 2013-06-11 18:39:54 +02:00
Uwe Hermann eea49cf10d ols/link-mso19: Consistency fixes. 
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
 2013-06-02 17:03:40 +02:00
Uwe Hermann 1c2d542df2 demo: Use std_dev_clear(). 2013-06-02 16:57:07 +02:00
Uwe Hermann 3b412e3a30 s/clear_instances/dev_clear/. 
Consistently use the same name for the dev_clear() API callback
everywhere.
 2013-06-02 16:56:41 +02:00
Uwe Hermann f6beaac55c std: Drop hw_ from function names. 
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
 2013-06-02 16:46:18 +02:00
Uwe Hermann 3678cf73fe asix-sigma: Use std_dev_clear(). 2013-06-02 16:46:18 +02:00
Uwe Hermann c43cf4d40e alsa: Use std_dev_clear(). 2013-06-02 16:46:17 +02:00
Uwe Hermann fa85f37630 rigol-ds1xx2: Use std_dev_clear(). 2013-06-02 13:52:40 +02:00
Uwe Hermann dec6c583a2 hantek-dso: Simplify cleanup(). 2013-06-02 13:52:40 +02:00
Uwe Hermann 658636f1c9 nexus-osciprime: Use std_dev_clear(). 2013-06-02 13:52:40 +02:00
Uwe Hermann c9d622a420 lascar-el-usb: Use std_dev_clear(). 2013-06-02 13:52:40 +02:00
Uwe Hermann 771bd216fa fluke-dmm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 732899f8cf colead-slm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 676c28a846 agilent-dmm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 8d18d266f5 victor-dmm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 40bbc64293 brymen-dmm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 6078d2c996 Use consistent API callback function names. 
This now matches what the 'new-driver' tool generates.
 2013-05-10 20:01:37 +02:00
Uwe Hermann 8111446ae0 zeroplus: Properly set inst_type to SR_INST_USB. 2013-05-10 19:16:25 +02:00
Uwe Hermann d6445cb0da zeroplus: Use std_dev_clear(). 2013-05-10 19:06:47 +02:00
Uwe Hermann 8dca646ef9 uni-t-dmm: Use std_dev_clear(). 2013-05-10 18:59:46 +02:00
Uwe Hermann 3f0513bac1 serial-dmm: Use std_dev_clear(). 2013-05-10 18:53:42 +02:00
Uwe Hermann 9790079961 chronovu-la8: Use std_dev_clear(). 2013-05-10 18:40:13 +02:00
Uwe Hermann decfe89d4e Drop some lines that are no longer needed. 2013-05-10 18:30:32 +02:00
Uwe Hermann 0bdb4f2e4a tondaj-sl-814: Use std_dev_clear(). 2013-05-10 17:56:53 +02:00
Uwe Hermann 25e7adada7 mic-985xx: Use std_dev_clear(). 2013-05-10 17:54:53 +02:00
Uwe Hermann 2a052cc4d6 Use consistent naming for internal libtool helper libs. 
This now also matches what the 'new-driver' tool generates.
 2013-05-10 17:44:01 +02:00
Uwe Hermann 9e165e742f Use consistent HW_ name prefixes everywhere. 
Older drivers used LA_* previously, we now use HW_* everywhere though.
 2013-05-10 17:18:42 +02:00
Uwe Hermann 7ab89f4827 Re-enable link-mso19 and nexus-osciprime drivers. 2013-05-08 16:40:45 +02:00
Bert Vermeulen 9dc7a75e3d fx2lafw: Fix memory leak 2013-05-06 20:44:26 +02:00
Bert Vermeulen 03f4de8cf2 ols: Code cleanup 
This also fixes a memory leak.
 2013-05-06 00:42:18 +02:00
Uwe Hermann 26aec7fdc4 Drop link-mso19/nexus-osciprime in preparation for release. 
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.

They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.

Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.

It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
 2013-05-04 15:59:40 +02:00
Uwe Hermann c5ffac4148 uni-t-dmm: Add missing SR_CONF_LIMIT_MSEC support. 2013-05-04 00:13:25 +02:00
Uwe Hermann 29a27196a1 s/DRIVER_LOG_DOMAIN/LOG_PREFIX/. 
This is more correct anyway, and also a bit shorter and more readable.
 2013-05-03 21:59:32 +02:00
Uwe Hermann 06c45a66f7 Minor whitespace fixes. 2013-05-03 14:03:49 +02:00
Uwe Hermann c2fa697afa serial-dmm: Add Tecpel DMM-8060 support. 2013-05-01 03:16:47 +02:00
Uwe Hermann b38e08fbb7 serial-dmm: Add Tecpel DMM-8061 support. 2013-05-01 03:13:43 +02:00
Uwe Hermann 4554314c4f uni-t-dmm: Add Tecpel DMM-8060 support. 
This is _very_ likely to be a rebadged Voltcraft VC-820, treating as such.
 2013-05-01 03:04:46 +02:00
Uwe Hermann b6bad47c91 uni-t-dmm: Add Tecpel DMM-8061 support. 2013-05-01 03:00:41 +02:00
Uwe Hermann 2451a20ff5 fs9721: Factor out common code from serial-dmm. 
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
 2013-05-01 02:16:55 +02:00
Uwe Hermann 4853559466 uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature. 2013-05-01 01:58:42 +02:00
Uwe Hermann ad00a54da6 fs9922: Fix beep mode. 2013-05-01 01:02:46 +02:00
Uwe Hermann 649a4cd672 fs9922: Fix diode mode parsing. 2013-05-01 01:00:54 +02:00
Uwe Hermann 767aae30ed uni-t-dmm: Fix incorrect UNI-T UT61D baudrate. 2013-04-30 20:22:18 +02:00
Uwe Hermann 695d0e1efa uni-t-dmm: Add support for the Voltcraft VC-840. 
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
 2013-04-30 20:22:17 +02:00
Uwe Hermann bbef5e326d uni-t-dmm: Add support for the UNI-T UT61E. 
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
 2013-04-30 20:22:17 +02:00
Uwe Hermann ae3a59de62 serial-dmm: Add support for the UNI-T UT61D. 
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
 2013-04-30 20:22:17 +02:00
Uwe Hermann 3ece1dff6c uni-t-dmm: Use sr_dev_inst to store connection handle. 2013-04-30 20:22:17 +02:00
Uwe Hermann d9a7c349ed brymen-dmm: Use sr_dev_inst to store connection handle. 2013-04-30 20:22:17 +02:00
Bert Vermeulen 0a7da5f8c9 fx2lafw: Keep track of our own libusb fds 2013-04-30 09:55:44 +02:00
Bert Vermeulen 2a67abfe34 fx2lafw: Properly initialize operational state before acquisition 2013-04-29 19:02:26 +02:00
Bert Vermeulen 0f75d6f5a9 ols: Don't close serial port after acquisition is done 2013-04-29 12:39:26 +02:00
Uwe Hermann a5e44c3247 tondaj-sl-814: Use sr_dev_inst to store connection handle. 2013-04-27 21:22:15 +02:00
Bert Vermeulen 50c604f50b Don't automatically clear known instances from USB drivers on scan 
This invalidates previously returned sr_dev_inst pointers, which a
frontend may be holding. It's the frontend's responsibility to clear
the list of instances a driver keeps track of by calling

	sr_dev_clear(driver);

if it wants a completely new scan done.
 2013-04-27 18:27:32 +02:00
Bert Vermeulen b9470914d0 Remove sr_rational 2013-04-26 22:51:12 +02:00
Uwe Hermann bc653a5678 uni-t-dmm: Do proper detection of packets in the stream. 
Also, various fixups in the driver.
 2013-04-26 20:54:21 +02:00
Uwe Hermann c885268777 uni-t-dmm: Make driver more similar to serial-dmm. 2013-04-26 20:05:44 +02:00
Uwe Hermann 7381251e33 common/dmm: Drop obsolete *is_packet_start() functions. 2013-04-26 20:05:44 +02:00
Uwe Hermann 913abe8321 fs9922: Use common DMM API. 
Use the same functions and structs as the other DMM protocol parsers
in hardware/common/dmm. Among other things, this allows the functions
to be used from drivers in a generic way, e.g. in serial-dmm, uni-t-dmm,
and possibly other drivers.
 2013-04-26 20:05:44 +02:00