kicad/pcbnew/specctra_export.cpp

1645 lines
53 KiB
C++
Raw Normal View History

2008-01-21 21:24:39 +00:00
/*
* This program source code file is part of KiCad, a free EDA CAD application.
2008-01-21 21:24:39 +00:00
*
* Copyright (C) 2007-2008 SoftPLC Corporation, Dick Hollenbeck <dick@softplc.com>
* Copyright (C) 2007 KiCad Developers, see change_log.txt for contributors.
2008-02-07 20:23:58 +00:00
*
2008-01-21 21:24:39 +00:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
2008-02-07 20:23:58 +00:00
*
2008-01-21 21:24:39 +00:00
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
2008-02-07 20:23:58 +00:00
*
2008-01-21 21:24:39 +00:00
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
2008-02-07 20:23:58 +00:00
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
2008-01-21 21:24:39 +00:00
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
2008-02-07 20:23:58 +00:00
2008-01-21 21:24:39 +00:00
/* This source is a complement to specctra.cpp and implements the export to
specctra dsn file format. The specification for the grammar of the specctra
dsn file used to develop this code is given here:
2008-09-17 13:32:43 +00:00
http://tech.groups.yahoo.com/group/kicad-users/files/ then file "specctra.pdf"
2008-02-07 20:23:58 +00:00
2008-01-21 21:24:39 +00:00
Also see the comments at the top of the specctra.cpp file itself.
*/
#include <wxPcbStruct.h>
#include <pcbstruct.h> // HISTORY_NUMBER
#include <confirm.h> // DisplayError()
#include <gestfich.h> // EDA_FileSelector()
#include <trigo.h> // RotatePoint()
2008-02-09 08:34:45 +00:00
#include <set> // std::set
2008-02-14 01:07:52 +00:00
#include <map> // std::map
2008-02-01 01:09:39 +00:00
2008-02-14 01:07:52 +00:00
#include <boost/utility.hpp> // boost::addressof()
2008-01-21 21:24:39 +00:00
#include <class_board.h>
#include <class_module.h>
#include <class_edge_mod.h>
#include <class_track.h>
#include <class_zone.h>
#include <class_drawsegment.h>
#include <base_units.h>
#include <collectors.h>
#include <specctra.h>
2008-01-21 22:16:45 +00:00
using namespace DSN;
2008-01-21 21:24:39 +00:00
2009-09-10 15:22:26 +00:00
// Add .1 mil to the requested clearances as a safety margin.
// There has been disagreement about interpretation of clearance in the past
// between KiCad and Freerouter, so keep this safetyMargin until the
2009-09-10 15:22:26 +00:00
// disagreement is resolved and stable. Freerouter seems to be moving
// (protected) traces upon loading the DSN file, and even though it seems to sometimes
// add its own 0.1 to the clearances, I believe this is happening after
// the load process (and moving traces) so I am of the opinion this is
// still needed.
static const double safetyMargin = 0.1;
2008-01-21 21:24:39 +00:00
// see wxPcbStruct.h
void PCB_EDIT_FRAME::ExportToSpecctra( wxCommandEvent& event )
2008-01-21 21:24:39 +00:00
{
wxString fullFileName = GetScreen()->GetFileName();
wxString path;
wxString name;
wxString ext;
2008-02-07 20:23:58 +00:00
wxString dsn_ext = wxT( ".dsn" );
wxString mask = wxT( "*" ) + dsn_ext;
wxFileName::SplitPath( fullFileName, &path, &name, &ext );
name += dsn_ext;
2008-02-07 20:23:58 +00:00
2008-01-22 20:48:02 +00:00
fullFileName = EDA_FileSelector( _( "Specctra DSN file:" ),
path,
name, // name.ext without path!
dsn_ext,
mask,
2008-01-22 20:48:02 +00:00
this,
wxFD_SAVE,
false
2008-01-22 20:48:02 +00:00
);
if( fullFileName == wxEmptyString )
return;
2008-01-21 22:16:45 +00:00
2008-01-22 20:48:02 +00:00
SPECCTRA_DB db;
2008-01-24 21:47:54 +00:00
bool ok = true;
wxString errorText;
2008-02-01 20:32:18 +00:00
BASE_SCREEN* screen = GetScreen();
bool wasModified = screen->IsModify();
2008-02-07 20:23:58 +00:00
2008-01-21 22:16:45 +00:00
db.SetPCB( SPECCTRA_DB::MakePCB() );
2008-01-24 21:47:54 +00:00
2008-06-06 16:39:45 +00:00
SetLocaleTo_C_standard( ); // Switch the locale to standard C
2008-02-07 20:23:58 +00:00
// DSN Images (=KiCad MODULES and pads) must be presented from the
2008-02-29 06:49:34 +00:00
// top view. So we temporarily flip any modules which are on the back
// side of the board to the front, and record this in the MODULE's flag field.
db.FlipMODULEs( GetBoard() );
2008-02-29 06:49:34 +00:00
2008-02-07 20:23:58 +00:00
try
{
2009-09-10 15:22:26 +00:00
GetBoard()->SynchronizeNetsAndNetClasses();
db.FromBOARD( GetBoard() );
2008-01-22 20:48:02 +00:00
db.ExportPCB( fullFileName, true );
2008-02-07 20:23:58 +00:00
// if an exception is thrown by FromBOARD or ExportPCB(), then
2008-01-23 01:52:49 +00:00
// ~SPECCTRA_DB() will close the file.
2008-02-07 20:23:58 +00:00
}
catch( IO_ERROR& ioe )
2008-01-21 22:16:45 +00:00
{
2008-01-24 21:47:54 +00:00
ok = false;
2008-02-07 20:23:58 +00:00
// copy the error string to safe place, ioe is in this scope only.
2008-01-24 21:47:54 +00:00
errorText = ioe.errorText;
}
2008-06-06 16:39:45 +00:00
SetLocaleTo_Default( ); // revert to the current locale
2008-02-07 20:23:58 +00:00
2008-02-29 06:49:34 +00:00
// done assuredly, even if an exception was thrown and caught.
db.RevertMODULEs( GetBoard() );
2008-02-14 15:34:40 +00:00
2009-08-06 07:11:04 +00:00
// The two calls below to MODULE::Flip(), both set the
2008-02-07 20:23:58 +00:00
// modified flag, yet their actions cancel each other out, so it should
2008-02-01 20:32:18 +00:00
// be ok to clear the modify flag.
if( !wasModified )
screen->ClrModify();
2008-02-07 20:23:58 +00:00
2008-01-24 21:47:54 +00:00
if( ok )
{
SetStatusText( wxString( _( "BOARD exported OK." ) ) );
2008-01-24 21:47:54 +00:00
}
else
2008-02-09 08:34:45 +00:00
{
errorText += '\n';
errorText += _( "Unable to export, please fix and try again." );
2008-01-24 21:47:54 +00:00
DisplayError( this, errorText );
2008-02-09 08:34:45 +00:00
}
2008-01-21 21:24:39 +00:00
}
namespace DSN {
2008-01-22 20:48:02 +00:00
const KICAD_T SPECCTRA_DB::scanPADs[] = { PCB_PAD_T, EOT };
2008-02-03 15:23:00 +00:00
// "specctra reported units" are what we tell the external router that our
// exported lengths are in.
2008-02-03 15:23:00 +00:00
/**
* Function scale
* converts a distance from PCBNEW internal units to the reported specctra dsn units
* in floating point format.
*/
2008-01-24 21:47:54 +00:00
static inline double scale( int kicadDist )
{
#if defined(USE_PCBNEW_NANOMETRES)
2012-04-11 14:49:11 +00:00
// nanometers to um
return kicadDist / ( IU_PER_MM / 1000.0 );
// nanometers to mils
// return kicadDist/IU_PER_MILS;
#else
// deci-mils to mils.
2008-01-24 21:47:54 +00:00
return kicadDist/10.0;
#endif
}
/// Convert integer internal units to float um
static inline double IU2um( int kicadDist )
{
return kicadDist * (1000.0 / IU_PER_MM);
2008-01-24 21:47:54 +00:00
}
2008-01-24 21:47:54 +00:00
static inline double mapX( int x )
{
return scale(x);
}
static inline double mapY( int y )
{
return -scale(y); // make y negative, since it is increasing going down.
}
2008-01-23 01:52:49 +00:00
/**
* Function mapPt
* converts a KiCad point into a DSN file point. Kicad's BOARD coordinates
2008-01-23 01:52:49 +00:00
* are in deci-mils (i.e. 1/10,000th of an inch) and we are exporting in units
* of mils, so we have to divide by 10.
*/
2008-01-22 20:48:02 +00:00
static POINT mapPt( const wxPoint& pt )
2008-01-21 22:16:45 +00:00
{
2008-01-22 20:48:02 +00:00
POINT ret;
2008-01-24 21:47:54 +00:00
ret.x = mapX( pt.x );
ret.y = mapY( pt.y );
ret.FixNegativeZero();
2008-01-22 20:48:02 +00:00
return ret;
}
2008-01-21 22:16:45 +00:00
2008-01-22 20:48:02 +00:00
2008-02-01 20:32:18 +00:00
/**
* Function findPoint
* searches for a DRAWSEGMENT with an end point or start point of aPoint, and
* if found, removes it from the TYPE_COLLECTOR and returns it, else returns NULL.
* @param aPoint The starting or ending point to search for.
* @param items The list to remove from.
* @return DRAWSEGMENT* - The first DRAWSEGMENT that has a start or end point matching
* aPoint, otherwise NULL if none.
2008-02-01 20:32:18 +00:00
*/
static DRAWSEGMENT* findPoint( const wxPoint& aPoint, TYPE_COLLECTOR* items )
2008-02-01 20:32:18 +00:00
{
for( int i=0; i<items->GetCount(); ++i )
2008-02-01 20:32:18 +00:00
{
DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i];
2008-02-07 20:23:58 +00:00
wxASSERT( graphic->Type() == PCB_LINE_T );
2011-12-14 04:29:25 +00:00
switch( graphic->GetShape() )
2008-02-01 20:32:18 +00:00
{
2011-12-14 04:29:25 +00:00
case S_ARC:
if( aPoint == graphic->GetArcStart() || aPoint == graphic->GetArcEnd() )
{
items->Remove(i);
return graphic;
}
break;
default:
if( aPoint == graphic->GetStart() || aPoint == graphic->GetEnd() )
{
items->Remove(i);
return graphic;
}
2008-02-01 20:32:18 +00:00
}
}
2008-02-07 20:23:58 +00:00
#if defined(DEBUG)
printf("Unable to find segment matching point (%d,%d)\n",
aPoint.x, aPoint.y );
2008-02-07 20:23:58 +00:00
for( int i=0; i<items->GetCount(); ++i )
2008-02-01 20:32:18 +00:00
{
DRAWSEGMENT* graphic = (DRAWSEGMENT*) (*items)[i];
printf( "type=%s, GetStart()=%d,%d GetEnd()=%d,%d\n",
2011-12-14 04:29:25 +00:00
TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() ) ),
graphic->GetStart().x,
graphic->GetStart().y,
graphic->GetEnd().x,
graphic->GetEnd().y );
2008-02-01 20:32:18 +00:00
}
#endif
2008-02-07 20:23:58 +00:00
return NULL;
2008-01-22 20:48:02 +00:00
}
2008-02-09 08:34:45 +00:00
/**
* Function isRoundKeepout
2008-02-14 01:59:31 +00:00
* decides if the pad is a copper-less through hole which needs to be made into
2008-02-09 08:34:45 +00:00
* a round keepout.
*/
static bool isRoundKeepout( D_PAD* aPad )
2008-02-09 08:34:45 +00:00
{
2012-02-19 04:02:19 +00:00
if( aPad->GetShape()==PAD_CIRCLE )
{
2012-02-19 04:02:19 +00:00
if( aPad->GetDrillSize().x >= aPad->GetSize().x )
return true;
2012-02-19 04:02:19 +00:00
if( (aPad->GetLayerMask() & ALL_CU_LAYERS) == 0 )
return true;
}
return false;
2008-02-09 08:34:45 +00:00
}
2008-01-25 22:03:36 +00:00
/**
* Function makePath
* creates a PATH element with a single straight line, a pair of vertices.
*/
static PATH* makePath( const POINT& aStart, const POINT& aEnd, const std::string& aLayerName )
{
PATH* path = new PATH( 0, T_path );
path->AppendPoint( aStart );
path->AppendPoint( aEnd );
path->SetLayerId( aLayerName.c_str() );
return path;
}
2008-02-14 01:07:52 +00:00
PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
{
char name[256]; // padstack name builder
2008-02-14 01:07:52 +00:00
std::string uniqifier;
2008-01-29 16:45:14 +00:00
// caller must do these checks before calling here.
wxASSERT( !isRoundKeepout( aPad ) );
2008-01-29 16:45:14 +00:00
2008-02-14 01:07:52 +00:00
PADSTACK* padstack = new PADSTACK();
int reportedLayers = 0; // how many in reported padstack
const char* layerName[NB_COPPER_LAYERS];
2008-02-07 20:23:58 +00:00
2008-11-10 20:54:26 +00:00
uniqifier = '[';
2008-02-07 20:23:58 +00:00
2012-02-19 04:02:19 +00:00
bool onAllCopperLayers = ( (aPad->GetLayerMask() & ALL_CU_LAYERS) == ALL_CU_LAYERS );
2008-02-07 20:23:58 +00:00
2008-11-10 20:54:26 +00:00
if( onAllCopperLayers )
uniqifier += 'A'; // A for all layers
2008-02-12 02:09:39 +00:00
2008-11-10 20:54:26 +00:00
const int copperCount = aBoard->GetCopperLayerCount();
for( int layer=0; layer<copperCount; ++layer )
2008-02-14 01:07:52 +00:00
{
2008-11-10 20:54:26 +00:00
int kilayer = pcbLayer2kicad[layer];
2008-11-10 20:54:26 +00:00
if( onAllCopperLayers || aPad->IsOnLayer( kilayer ) )
2008-02-14 01:07:52 +00:00
{
2008-11-10 20:54:26 +00:00
layerName[reportedLayers++] = layerIds[layer].c_str();
2008-11-10 20:54:26 +00:00
if( !onAllCopperLayers )
{
2008-11-10 20:54:26 +00:00
if( layer == 0 )
uniqifier += 'T';
else if( layer == copperCount-1 )
uniqifier += 'B';
else
uniqifier += char('0' + layer); // layer index char
}
}
2008-01-29 16:45:14 +00:00
}
2008-02-07 20:23:58 +00:00
2008-11-10 20:54:26 +00:00
uniqifier += ']';
POINT dsnOffset;
2012-02-19 04:02:19 +00:00
if( aPad->GetOffset().x || aPad->GetOffset().y )
{
char offsetTxt[64];
2012-02-19 04:02:19 +00:00
wxPoint offset( aPad->GetOffset().x, aPad->GetOffset().y );
dsnOffset = mapPt( offset );
// using '(' or ')' would cause padstack name to be quote wrapped,
// so use other brackets, and {} locks freerouter.
sprintf( offsetTxt, "[%.6g,%.6g]", dsnOffset.x, dsnOffset.y );
uniqifier += offsetTxt;
}
2012-02-19 04:02:19 +00:00
switch( aPad->GetShape() )
2008-02-05 02:13:16 +00:00
{
2008-02-14 01:07:52 +00:00
default:
case PAD_CIRCLE:
{
2012-02-19 04:02:19 +00:00
double diameter = scale(aPad->GetSize().x);
2008-02-01 01:09:39 +00:00
2008-02-14 01:07:52 +00:00
for( int ndx=0; ndx<reportedLayers; ++ndx )
{
SHAPE* shape = new SHAPE( padstack );
padstack->Append( shape );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
CIRCLE* circle = new CIRCLE( shape );
shape->SetShape( circle );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
circle->SetLayerId( layerName[ndx] );
circle->SetDiameter( diameter );
circle->SetVertex( dsnOffset );
2008-02-14 01:07:52 +00:00
}
2008-02-07 20:23:58 +00:00
snprintf( name, sizeof(name), "Round%sPad_%.6g_um",
uniqifier.c_str(), IU2um( aPad->GetSize().x ) );
2008-02-14 01:07:52 +00:00
name[ sizeof(name)-1 ] = 0;
2008-02-14 01:07:52 +00:00
padstack->SetPadstackId( name );
}
2008-02-05 02:13:16 +00:00
break;
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
case PAD_RECT:
{
2012-02-19 04:02:19 +00:00
double dx = scale( aPad->GetSize().x ) / 2.0;
double dy = scale( aPad->GetSize().y ) / 2.0;
2008-02-05 02:13:16 +00:00
2008-02-14 01:07:52 +00:00
POINT lowerLeft( -dx, -dy );
POINT upperRight( dx, dy );
2008-02-07 20:23:58 +00:00
lowerLeft += dsnOffset;
upperRight += dsnOffset;
2008-02-14 01:07:52 +00:00
for( int ndx=0; ndx<reportedLayers; ++ndx )
{
SHAPE* shape = new SHAPE( padstack );
padstack->Append( shape );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
RECTANGLE* rect = new RECTANGLE( shape );
shape->SetShape( rect );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
rect->SetLayerId( layerName[ndx] );
rect->SetCorners( lowerLeft, upperRight );
}
snprintf( name, sizeof(name), "Rect%sPad_%.6gx%.6g_um",
uniqifier.c_str(),
IU2um( aPad->GetSize().x ),
IU2um( aPad->GetSize().y ) );
2008-02-14 01:07:52 +00:00
name[ sizeof(name)-1 ] = 0;
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
padstack->SetPadstackId( name );
}
2008-02-05 02:13:16 +00:00
break;
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
case PAD_OVAL:
{
2012-02-19 04:02:19 +00:00
double dx = scale( aPad->GetSize().x ) / 2.0;
double dy = scale( aPad->GetSize().y ) / 2.0;
double dr = dx - dy;
double radius;
POINT start;
POINT stop;
2008-02-01 01:09:39 +00:00
2008-02-14 01:07:52 +00:00
if( dr >= 0 ) // oval is horizontal
{
radius = dy;
start = POINT( -dr, 0.0 );
stop = POINT( dr, 0.0 );
2008-02-14 01:07:52 +00:00
}
else // oval is vertical
{
radius = dx;
2008-02-14 01:07:52 +00:00
dr = -dr;
2008-02-01 01:09:39 +00:00
start = POINT( 0.0, -dr );
stop = POINT( 0.0, dr );
}
start += dsnOffset;
stop += dsnOffset;
for( int ndx=0; ndx<reportedLayers; ++ndx )
{
SHAPE* shape;
PATH* path;
// see http://www.freerouting.net/usren/viewtopic.php?f=3&t=317#p408
shape = new SHAPE( padstack );
padstack->Append( shape );
path = makePath( start, stop, layerName[ndx] );
shape->SetShape( path );
path->aperture_width = 2.0 * radius;
2008-02-14 01:07:52 +00:00
}
2008-02-01 01:09:39 +00:00
snprintf( name, sizeof(name), "Oval%sPad_%.6gx%.6g_um",
uniqifier.c_str(),
IU2um( aPad->GetSize().x ),
IU2um( aPad->GetSize().y ) );
2008-02-14 01:07:52 +00:00
name[ sizeof(name)-1 ] = 0;
2008-02-01 01:09:39 +00:00
2008-02-14 01:07:52 +00:00
padstack->SetPadstackId( name );
}
break;
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
case PAD_TRAPEZOID:
{
2012-02-19 04:02:19 +00:00
double dx = scale( aPad->GetSize().x ) / 2.0;
double dy = scale( aPad->GetSize().y ) / 2.0;
2012-02-19 04:02:19 +00:00
double ddx = scale( aPad->GetDelta().x ) / 2.0;
double ddy = scale( aPad->GetDelta().y ) / 2.0;
// see class_pad_draw_functions.cpp which draws the trapezoid pad
2010-09-07 17:04:39 +00:00
POINT lowerLeft( -dx - ddy, -dy - ddx );
POINT upperLeft( -dx + ddy, +dy + ddx );
POINT upperRight( +dx - ddy, +dy - ddx );
POINT lowerRight( +dx + ddy, -dy + ddx );
lowerLeft += dsnOffset;
upperLeft += dsnOffset;
upperRight += dsnOffset;
lowerRight += dsnOffset;
for( int ndx=0; ndx<reportedLayers; ++ndx )
{
SHAPE* shape = new SHAPE( padstack );
padstack->Append( shape );
// a T_polygon exists as a PATH
PATH* polygon = new PATH( shape, T_polygon );
shape->SetShape( polygon );
polygon->SetLayerId( layerName[ndx] );
polygon->AppendPoint( lowerLeft );
polygon->AppendPoint( upperLeft );
polygon->AppendPoint( upperRight );
polygon->AppendPoint( lowerRight );
}
2012-02-19 04:02:19 +00:00
D(printf( "m_DeltaSize: %d,%d\n", aPad->GetDelta().x, aPad->GetDelta().y );)
// this string _must_ be unique for a given physical shape
snprintf( name, sizeof(name), "Trapz%sPad_%.6gx%.6g_%c%.6gx%c%.6g_um",
uniqifier.c_str(), IU2um( aPad->GetSize().x ), IU2um( aPad->GetSize().y ),
2012-02-19 04:02:19 +00:00
aPad->GetDelta().x < 0 ? 'n' : 'p',
abs( IU2um( aPad->GetDelta().x )),
2012-02-19 04:02:19 +00:00
aPad->GetDelta().y < 0 ? 'n' : 'p',
abs( IU2um( aPad->GetDelta().y ) )
);
name[ sizeof(name)-1 ] = 0;
padstack->SetPadstackId( name );
}
2008-02-14 01:07:52 +00:00
break;
}
2008-02-07 20:23:58 +00:00
2008-02-01 01:09:39 +00:00
return padstack;
2008-02-07 20:23:58 +00:00
}
2008-02-01 01:09:39 +00:00
2008-02-29 06:49:34 +00:00
/// data type used to ensure unique-ness of pin names, holding (wxString and int)
2009-09-10 15:22:26 +00:00
typedef std::map<wxString, int> PINMAP;
2008-02-09 08:34:45 +00:00
2008-02-14 01:07:52 +00:00
IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
2008-01-24 21:47:54 +00:00
{
2008-02-14 01:07:52 +00:00
PINMAP pinmap;
TYPE_COLLECTOR moduleItems;
2008-02-14 01:07:52 +00:00
wxString padName;
2008-01-24 21:47:54 +00:00
2008-01-25 22:03:36 +00:00
2008-02-14 01:07:52 +00:00
// get all the MODULE's pads.
moduleItems.Collect( aModule, scanPADs );
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
IMAGE* image = new IMAGE(0);
2008-02-07 20:23:58 +00:00
image->image_id = TO_UTF8( aModule->m_LibRef );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
// from the pads, and make an IMAGE using collated padstacks.
for( int p=0; p<moduleItems.GetCount(); ++p )
2008-02-14 01:07:52 +00:00
{
D_PAD* pad = (D_PAD*) moduleItems[p];
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
// see if this pad is a through hole with no copper on its perimeter
if( isRoundKeepout( pad ) )
2008-01-24 21:47:54 +00:00
{
2012-02-19 04:02:19 +00:00
double diameter = scale( pad->GetDrillSize().x );
POINT vertex = mapPt( pad->GetPos0() );
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
int layerCount = aBoard->GetCopperLayerCount();
for( int layer=0; layer<layerCount; ++layer )
{
KEEPOUT* keepout = new KEEPOUT(image, T_keepout);
image->keepouts.push_back( keepout );
2008-02-08 15:00:50 +00:00
CIRCLE* circle = new CIRCLE( keepout );
2008-02-14 01:07:52 +00:00
keepout->SetShape( circle );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
circle->SetDiameter( diameter );
circle->SetVertex( vertex );
circle->SetLayerId( layerIds[layer].c_str() );
}
}
// else if() could there be a square keepout here?
2008-02-14 01:07:52 +00:00
else
2008-02-08 15:00:50 +00:00
{
2008-02-14 01:07:52 +00:00
PADSTACK* padstack = makePADSTACK( aBoard, pad );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
PADSTACKSET::iterator iter = padstackset.find( *padstack );
if( iter != padstackset.end() )
2008-02-08 15:00:50 +00:00
{
2008-02-14 01:07:52 +00:00
// padstack is a duplicate, delete it and use the original
delete padstack;
padstack = (PADSTACK*) *iter.base(); // folklore, be careful here
2008-02-08 15:00:50 +00:00
}
2008-02-14 01:07:52 +00:00
else
2008-02-08 15:00:50 +00:00
{
2008-02-14 01:07:52 +00:00
padstackset.insert( padstack );
2008-02-08 15:00:50 +00:00
}
2008-01-31 01:30:52 +00:00
2008-02-14 01:07:52 +00:00
PIN* pin = new PIN(image);
2008-02-07 20:23:58 +00:00
2011-12-12 08:37:05 +00:00
padName = pad->GetPadName();
pin->pin_id = TO_UTF8( padName );
2008-02-14 01:07:52 +00:00
if( padName!=wxEmptyString && pinmap.find( padName )==pinmap.end() )
2008-01-24 21:47:54 +00:00
{
2008-02-14 01:07:52 +00:00
pinmap[ padName ] = 0;
}
else // pad name is a duplicate within this module
2008-02-14 01:07:52 +00:00
{
char buf[32];
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
int duplicates = ++pinmap[ padName ];
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
sprintf( buf, "@%d", duplicates );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
pin->pin_id += buf; // append "@1" or "@2", etc. to pin name
}
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
pin->kiNetCode = pad->GetNet();
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
image->pins.push_back( pin );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
pin->padstack_id = padstack->padstack_id;
2008-01-24 21:47:54 +00:00
2012-02-19 04:02:19 +00:00
int angle = pad->GetOrientation() - aModule->GetOrientation(); // tenths of degrees
2008-02-14 01:07:52 +00:00
if( angle )
{
NORMALIZE_ANGLE_POS(angle);
pin->SetRotation( angle / 10.0 );
}
2008-02-07 20:23:58 +00:00
2012-02-19 04:02:19 +00:00
wxPoint pos( pad->GetPos0() );
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
pin->SetVertex( mapPt( pos ) );
}
}
2008-02-07 20:23:58 +00:00
2008-03-01 13:15:41 +00:00
#if 1 // enable image (outline) scopes.
static const KICAD_T scanEDGEs[] = { PCB_MODULE_EDGE_T, EOT };
// get all the MODULE's EDGE_MODULEs and convert those to DSN outlines.
moduleItems.Collect( aModule, scanEDGEs );
for( int i=0; i<moduleItems.GetCount(); ++i )
{
EDGE_MODULE* graphic = (EDGE_MODULE*) moduleItems[i];
SHAPE* outline;
PATH* path;
2011-12-14 04:29:25 +00:00
switch( graphic->GetShape() )
{
case S_SEGMENT:
outline = new SHAPE( image, T_outline );
image->Append( outline );
path = new PATH( outline );
outline->SetShape( path );
2011-12-14 04:29:25 +00:00
path->SetAperture( scale( graphic->GetWidth() ) );
path->SetLayerId( "signal" );
2011-12-14 04:29:25 +00:00
path->AppendPoint( mapPt( graphic->GetStart0() ) );
path->AppendPoint( mapPt( graphic->GetEnd0() ) );
break;
case S_CIRCLE:
{
// this is best done by 4 QARC's but freerouter does not yet support QARCs.
// for now, support by using line segments.
outline = new SHAPE( image, T_outline );
image->Append( outline );
path = new PATH( outline );
outline->SetShape( path );
2011-12-14 04:29:25 +00:00
path->SetAperture( scale( graphic->GetWidth() ) );
path->SetLayerId( "signal" );
// Do the math using KiCad units, that way we stay out of the
2008-02-29 06:49:34 +00:00
// scientific notation range of floating point numbers in the
// DSN file. We do not parse scientific notation in our own
// lexer/beautifier, and the spec is not clear that this is
// required. Fixed point floats are all that should be needed.
2011-12-14 04:29:25 +00:00
double radius = hypot( double( graphic->GetStart().x - graphic->GetEnd().x ),
double( graphic->GetStart().y - graphic->GetEnd().y ) );
// better if evenly divisible into 360
const int DEGREE_INTERVAL = 18; // 18 means 20 line segments
for( double radians = 0.0; radians < 2*M_PI; radians += DEGREE_INTERVAL * M_PI / 180.0 )
{
2008-02-29 06:49:34 +00:00
wxPoint point( int( radius * cos( radians ) ),
int( radius * sin( radians ) ) );
point += graphic->m_Start0; // an offset
path->AppendPoint( mapPt(point) );
}
}
break;
case S_RECT:
case S_ARC:
default:
D( printf("makeIMAGE(): unsupported shape %s\n",
2011-12-14 04:29:25 +00:00
TO_UTF8( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() )) );)
continue;
}
}
2008-03-01 13:15:41 +00:00
#endif
2008-02-14 01:07:52 +00:00
return image;
}
2008-02-07 20:23:58 +00:00
2008-01-25 22:03:36 +00:00
2008-02-14 01:07:52 +00:00
PADSTACK* SPECCTRA_DB::makeVia( int aCopperDiameter, int aDrillDiameter,
int aTopLayer, int aBotLayer )
{
char name[48];
PADSTACK* padstack = new PADSTACK();
2008-02-07 20:23:58 +00:00
double dsnDiameter = scale( aCopperDiameter );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
for( int layer=aTopLayer; layer<=aBotLayer; ++layer )
{
SHAPE* shape = new SHAPE( padstack );
padstack->Append( shape );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
CIRCLE* circle = new CIRCLE( shape );
shape->SetShape( circle );
2008-01-25 22:03:36 +00:00
2008-02-14 01:07:52 +00:00
circle->SetDiameter( dsnDiameter );
circle->SetLayerId( layerIds[layer].c_str() );
2008-01-24 21:47:54 +00:00
}
2008-01-26 02:02:27 +00:00
snprintf( name, sizeof(name), "Via[%d-%d]_%.6g:%.6g_um",
2008-02-14 01:07:52 +00:00
aTopLayer, aBotLayer, dsnDiameter,
// encode the drill value into the name for later import
IU2um( aDrillDiameter )
2008-02-14 01:07:52 +00:00
);
2008-02-14 01:07:52 +00:00
name[ sizeof(name)-1 ] = 0;
padstack->SetPadstackId( name );
2008-01-26 02:02:27 +00:00
2008-02-14 01:07:52 +00:00
return padstack;
}
2008-01-29 16:45:14 +00:00
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
PADSTACK* SPECCTRA_DB::makeVia( const SEGVIA* aVia )
{
int topLayer;
int botLayer;
2008-01-26 02:02:27 +00:00
2008-02-14 01:07:52 +00:00
aVia->ReturnLayerPair( &topLayer, &botLayer );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
topLayer = kicadLayer2pcb[topLayer];
botLayer = kicadLayer2pcb[botLayer];
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
if( topLayer > botLayer )
EXCHG( topLayer, botLayer );
return makeVia( aVia->m_Width, aVia->GetDrillValue(), topLayer, botLayer );
2008-01-21 22:16:45 +00:00
}
2008-01-22 20:48:02 +00:00
void SPECCTRA_DB::fillBOUNDARY( BOARD* aBoard, BOUNDARY* boundary ) throw( IO_ERROR )
{
TYPE_COLLECTOR items;
// get all the DRAWSEGMENTS into 'items', then look for layer == EDGE_N,
// and those segments comprise the board's perimeter.
static const KICAD_T scanDRAWSEGMENTS[] = { PCB_LINE_T, EOT };
items.Collect( aBoard, scanDRAWSEGMENTS );
bool haveEdges = false;
for( int i=0; i<items.GetCount(); )
{
DRAWSEGMENT* item = (DRAWSEGMENT*) items[i];
wxASSERT( item->Type() == PCB_LINE_T );
if( item->GetLayer() != EDGE_N )
{
items.Remove( i );
}
else
{
haveEdges = true;
++i;
D( item->Show( 0, std::cout );)
}
}
if( haveEdges )
{
PATH* path = new PATH( boundary );
boundary->paths.push_back( path );
path->layer_id = "pcb";
wxPoint prevPt;
DRAWSEGMENT* graphic = (DRAWSEGMENT*) items[0];
// the first DRAWSEGMENT is in 'graphic*', ok to remove it from 'items'
items.Remove( 0 );
prevPt = graphic->GetEnd();
path->AppendPoint( mapPt( prevPt ) );
// do not append the other end point yet, this first 'graphic' might be an arc
for(;;)
{
2011-12-14 04:29:25 +00:00
switch( graphic->GetShape() )
{
case S_SEGMENT:
{
wxPoint nextPt;
if( prevPt != graphic->GetStart() )
{
wxASSERT( prevPt == graphic->GetEnd() );
nextPt = graphic->GetStart();
}
else
{
wxASSERT( prevPt == graphic->GetStart() );
nextPt = graphic->GetEnd();
}
path->AppendPoint( mapPt(nextPt) );
prevPt = nextPt;
}
break;
case S_ARC:
// freerouter does not yet understand arcs, so approximate
// an arc with a series of short lines and put those
// line segments into the !same! PATH.
{
const int STEPS = 9; // in an arc of 90 degrees
2011-12-14 04:29:25 +00:00
wxPoint start = graphic->GetArcStart();
wxPoint end = graphic->GetArcEnd();
wxPoint center = graphic->GetCenter();
double angle = -graphic->GetAngle();
if( prevPt != start )
{
2011-12-14 04:29:25 +00:00
wxASSERT( prevPt == graphic->GetArcEnd() );
angle = -angle;
EXCHG( start, end );
}
wxPoint nextPt;
for( int step=1; step<=STEPS; ++step )
{
2011-12-14 04:29:25 +00:00
double rotation = ( angle * step )/STEPS;
nextPt = start;
RotatePoint( &nextPt.x, &nextPt.y, center.x, center.y, rotation );
path->AppendPoint( mapPt( nextPt ) );
}
prevPt = nextPt;
}
break;
case S_CIRCLE:
#if 0
// do not output a circle, freerouter does not understand it.
// this might be a mounting hole or something, ignore it without error
// because some of our demo boards have used the edges pcb layer to
// hold islanded circles, rather than simply using holes.
break;
#else
// Do not output a circle, freerouter does not understand it.
// tell user his board has a problem, this is better than silently
// ignoring the error. "edges pcb" layer should not be used
// to hold islanded circles which could or should be better done
// as simple holes. (Some of our demo boards have this problem.)
// fall thru here to report the error.
#endif
default:
{
wxString error;
error.Printf( _("Unsupported DRAWSEGMENT type %s"),
2011-12-14 04:29:25 +00:00
GetChars( BOARD_ITEM::ShowShape( (STROKE_T) graphic->GetShape() ) ) );
ThrowIOError( error );
}
break;
}
if( items.GetCount() == 0 )
break;
graphic = findPoint( prevPt, &items );
if( !graphic )
{
wxString error;
error << _("Unable to find the next segment with an endpoint of ");
error << prevPt;
error << wxChar('\n');
error << _("Edit Edges_Pcb segments, making them contiguous.");
ThrowIOError( error );
}
}
#if 0 && defined(DEBUG)
STRING_FORMATTER sf;
path->Format( &sf, 0 );
printf( "%s\n", sf.GetString().c_str() );
#endif
}
else
{
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
EDA_RECT bbbox = aBoard->ComputeBoundingBox();
RECTANGLE* rect = new RECTANGLE( boundary );
2008-05-05 20:13:54 +00:00
boundary->rectangle = rect;
rect->layer_id = "pcb";
// opposite corners
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
wxPoint bottomRight( bbbox.GetRight(), bbbox.GetBottom() );
++PCBNew * Removed Pcb_Frame argument from BOARD() constructor, since it precludes having a BOARD being edited by more than one editor, it was a bad design. And this meant removing m_PcbFrame from BOARD. * removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame * Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp * added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance * a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed, such as dialog_mask_clearance, dialog_drc, etc. * Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it with build_version.h's #define BOARD_FILE_VERSION, although there may be a better place for this constant. * Made the public functions in PARAM_CFG_ARRAY be type const. void SaveParam(..) const and void ReadParam(..) const * PARAM_CFG_BASE now has virtual destructor since we have various way of destroying the derived class and boost::ptr_vector must be told about this. * Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use an automatic PARAM_CFG_ARRAY which is on the stack.\ * PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array, since it has to access the current BOARD and the BOARD can change. Remember BOARD_DESIGN_SETTINGS are now in the BOARD. * Made the m_BoundingBox member private, this was a brutally hard task, and indicative of the lack of commitment to accessors and object oriented design on the part of KiCad developers. We must do better. Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox(). * Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
2011-12-05 06:15:33 +00:00
rect->SetCorners( mapPt( bbbox.GetOrigin() ),
mapPt( bottomRight ) );
}
}
2008-02-29 06:49:34 +00:00
typedef std::set<std::string> STRINGSET;
2008-02-14 01:07:52 +00:00
typedef std::pair<STRINGSET::iterator, bool> STRINGSET_PAIR;
void SPECCTRA_DB::FromBOARD( BOARD* aBoard ) throw( IO_ERROR )
2008-01-22 20:48:02 +00:00
{
TYPE_COLLECTOR items;
static const KICAD_T scanMODULEs[] = { PCB_MODULE_T, EOT };
2008-02-07 20:23:58 +00:00
2008-02-09 08:34:45 +00:00
// Not all boards are exportable. Check that all reference Ids are unique.
// Unless they are unique, we cannot import the session file which comes
2008-05-06 12:32:41 +00:00
// back to us later from the router.
2008-02-09 08:34:45 +00:00
{
2008-02-14 01:07:52 +00:00
TYPE_COLLECTOR padItems;
2008-02-09 08:34:45 +00:00
2008-02-14 01:07:52 +00:00
items.Collect( aBoard, scanMODULEs );
2008-02-09 08:34:45 +00:00
2008-02-14 01:07:52 +00:00
STRINGSET refs; // holds module reference designators
2008-02-09 08:34:45 +00:00
for( int i=0; i<items.GetCount(); ++i )
{
MODULE* module = (MODULE*) items[i];
if( module->GetReference() == wxEmptyString )
{
ThrowIOError( _("Component with value of \"%s\" has empty reference id."),
GetChars( module->GetValue() ) );
2008-02-09 08:34:45 +00:00
}
// if we cannot insert OK, that means the reference has been seen before.
STRINGSET_PAIR refpair = refs.insert( TO_UTF8( module->GetReference() ) );
2008-02-14 01:07:52 +00:00
if( !refpair.second ) // insert failed
2008-02-09 08:34:45 +00:00
{
ThrowIOError( _("Multiple components have identical reference IDs of \"%s\"."),
GetChars( module->GetReference() ) );
2008-02-09 08:34:45 +00:00
}
}
}
2008-02-07 20:23:58 +00:00
2008-01-22 20:48:02 +00:00
if( !pcb )
pcb = SPECCTRA_DB::MakePCB();
2008-01-31 01:30:52 +00:00
//-----<layer_descriptor>-----------------------------------------------
{
2008-02-07 20:23:58 +00:00
// specctra wants top physical layer first, then going down to the
2008-01-31 01:30:52 +00:00
// bottom most physical layer in physical sequence.
// @question : why does KiCad not display layers in that order?
2008-01-31 06:46:31 +00:00
buildLayerMaps( aBoard );
2008-02-07 20:23:58 +00:00
int layerCount = aBoard->GetCopperLayerCount();
2008-01-31 01:30:52 +00:00
for( int pcbNdx=0; pcbNdx<layerCount; ++pcbNdx )
{
2008-01-31 01:30:52 +00:00
LAYER* layer = new LAYER( pcb->structure );
pcb->structure->layers.push_back( layer );
2008-02-07 20:23:58 +00:00
layer->name = layerIds[pcbNdx];
2008-02-07 20:23:58 +00:00
2008-03-04 04:22:27 +00:00
DSN_T layerType;
switch( aBoard->GetLayerType( pcbLayer2kicad[pcbNdx] ) )
{
default:
case LT_SIGNAL: layerType = T_signal; break;
case LT_POWER: layerType = T_power; break;
case LT_MIXED: layerType = T_mixed; break;
2008-03-04 21:39:46 +00:00
case LT_JUMPER: layerType = T_jumper; break;
2008-03-04 04:22:27 +00:00
}
layer->layer_type = layerType;
2008-02-05 02:13:16 +00:00
layer->properties.push_back( PROPERTY() );
PROPERTY* property = &layer->properties.back();
property->name = "index";
char temp[32];
sprintf( temp, "%d", pcbNdx );
2008-02-07 20:23:58 +00:00
property->value = temp;
2008-01-31 01:30:52 +00:00
}
}
// a space in a quoted token is NOT a terminator, true establishes this.
pcb->parser->space_in_quoted_tokens = true;
2008-02-07 20:23:58 +00:00
2008-01-23 01:52:49 +00:00
//-----<unit_descriptor> & <resolution_descriptor>--------------------
2008-02-07 20:23:58 +00:00
{
#if defined(USE_PCBNEW_NANOMETRES)
2012-04-11 14:49:11 +00:00
// tell freerouter to use "tenths of micrometers",
// which is 100 nm resolution. Possibly more resolution is possible
// in freerouter, but it would need testing.
pcb->unit->units = T_um;
pcb->resolution->units = T_um;
2012-04-11 14:49:11 +00:00
pcb->resolution->value = 10; // tenths of a um
// pcb->resolution->value = 1000; // "thousandths of a um" (i.e. "nm")
#else
2008-01-23 01:52:49 +00:00
pcb->unit->units = T_mil;
pcb->resolution->units = T_mil;
// Kicad only supports 1/10th of mil internal coordinates. So to avoid
// having the router give us back 1/100th of mil coordinates which we
// will have to round and thereby cause error, we declare our maximum
// resolution precisely at 1/10th for now. For more on this, see:
// http://www.freerouting.net/usren/viewtopic.php?f=3&t=354
pcb->resolution->value = 10;
#endif
2008-01-23 01:52:49 +00:00
}
2008-01-22 20:48:02 +00:00
2008-01-23 01:52:49 +00:00
//-----<boundary_descriptor>------------------------------------------
2008-01-22 20:48:02 +00:00
{
// Because fillBOUNDARY() can throw an exception, we link in an
// empty boundary so the BOUNDARY does not get lost in the event of
// of an exception.
BOUNDARY* boundary = new BOUNDARY(0);
pcb->structure->SetBOUNDARY( boundary );
fillBOUNDARY( aBoard, boundary );
2008-01-22 20:48:02 +00:00
}
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
//-----<rules>--------------------------------------------------------
{
2008-02-09 08:34:45 +00:00
char rule[80];
2008-02-07 20:23:58 +00:00
2009-09-10 15:22:26 +00:00
int defaultTrackWidth = aBoard->m_NetClasses.GetDefault()->GetTrackWidth();
int defaultClearance = aBoard->m_NetClasses.GetDefault()->GetClearance();
2008-10-23 21:06:43 +00:00
2009-09-10 15:22:26 +00:00
double clearance = scale( defaultClearance );
2008-02-09 16:33:03 +00:00
2008-01-31 06:46:31 +00:00
STRINGS& rules = pcb->structure->rules->rules;
2008-02-07 20:23:58 +00:00
2009-09-10 15:22:26 +00:00
sprintf( rule, "(width %.6g)", scale( defaultTrackWidth ) );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g)", clearance+safetyMargin );
rules.push_back( rule );
// On a high density board (a board with 4 mil tracks, 4 mil spacing)
// a typical solder mask clearance will be 2-3 mils.
// This exposes 2 to 3 mils of bare board around each pad, and would
// leave only 1 to 2 mils of solder mask between the solder mask's boundary
// to the edge of any trace within "clearance" of the pad. So we need at least
// 2 mils *extra* clearance for traces which would come near a pad on
2008-10-23 21:06:43 +00:00
// a different net. So if the baseline trace to trace clearance was say 4 mils, then
// the SMD to trace clearance should be at least 6 mils.
double default_smd = clearance + safetyMargin;
if( default_smd <= 6.0 )
default_smd = 6.0;
sprintf( rule, "(clearance %.6g (type default_smd))", default_smd );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-03-31 13:45:36 +00:00
/* see: http://www.freerouting.net/usren/viewtopic.php?f=5&t=339#p474
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type pad_to_turn_gap))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type smd_to_turn_gap))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type via_via))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type via_smd))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type via_pin))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type pin_pin))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-02-07 20:23:58 +00:00
2008-10-23 21:06:43 +00:00
sprintf( rule, "(clearance %.6g (type smd_pin))", clearance + safetyMargin );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
2008-03-31 13:45:36 +00:00
*/
2008-02-07 20:23:58 +00:00
2008-02-09 16:33:03 +00:00
// well, the user is going to text edit these in the DSN file anyway,
// at least until we have an export dialog.
2008-10-23 21:06:43 +00:00
// Pad to pad spacing on a single SMT part can be closer than our
// clearance, we don't want freerouter complaining about that, so
// output a significantly smaller pad to pad clearance to freerouter.
2009-09-10 15:22:26 +00:00
clearance = scale( defaultClearance )/4;
2008-02-09 16:33:03 +00:00
sprintf( rule, "(clearance %.6g (type smd_smd))", clearance );
2008-01-31 06:46:31 +00:00
rules.push_back( rule );
}
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
//-----<zone containers become planes>--------------------------------
2008-01-23 22:36:37 +00:00
{
int netlessZones = 0;
static const KICAD_T scanZONEs[] = { PCB_ZONE_AREA_T, EOT };
2008-01-23 22:36:37 +00:00
items.Collect( aBoard, scanZONEs );
for( int i=0; i<items.GetCount(); ++i )
{
ZONE_CONTAINER* item = (ZONE_CONTAINER*) items[i];
COPPER_PLANE* plane = new COPPER_PLANE( pcb->structure );
2008-05-22 15:55:24 +00:00
pcb->structure->planes.push_back( plane );
2009-02-06 14:23:56 +00:00
PATH* mainPolygon = new PATH( plane, T_polygon );
plane->SetShape( mainPolygon );
2008-02-07 20:23:58 +00:00
plane->name = TO_UTF8( item->GetNetName() );
2008-01-31 01:30:52 +00:00
if( plane->name.size() == 0 )
{
char name[32];
// This is one of those no connection zones, netcode=0, and it has no name.
// Create a unique, bogus netname.
NET* no_net = new NET( pcb->network );
sprintf( name, "@:no_net_%d", netlessZones++ );
no_net->net_id = name;
// add the bogus net name to network->nets.
pcb->network->nets.push_back( no_net );
// use the bogus net name in the netless zone.
plane->name = no_net->net_id;
}
2009-02-06 14:23:56 +00:00
mainPolygon->layer_id = layerIds[ kicadLayer2pcb[ item->GetLayer() ] ];
2008-02-07 20:23:58 +00:00
2008-01-23 22:36:37 +00:00
int count = item->m_Poly->corner.size();
2009-02-06 14:23:56 +00:00
int ndx = 0; // used in 2 for() loops below
for( ; ndx<count; ++ndx )
2008-01-23 22:36:37 +00:00
{
2009-02-06 14:23:56 +00:00
wxPoint point( item->m_Poly->corner[ndx].x,
item->m_Poly->corner[ndx].y );
mainPolygon->AppendPoint( mapPt(point) );
// this was the end of the main polygon
if( item->m_Poly->corner[ndx].end_contour )
break;
}
WINDOW* window = 0;
PATH* cutout = 0;
// handle the cutouts
for( ++ndx; ndx<count; ++ndx )
{
if( item->m_Poly->corner[ndx-1].end_contour )
{
window = new WINDOW( plane );
plane->AddWindow( window );
cutout = new PATH( window, T_polygon );
2009-02-06 14:23:56 +00:00
window->SetShape( cutout );
cutout->layer_id = layerIds[ kicadLayer2pcb[ item->GetLayer() ] ];
}
wxASSERT( window );
wxASSERT( cutout );
wxPoint point(item->m_Poly->corner[ndx].x,
item->m_Poly->corner[ndx].y );
cutout->AppendPoint( mapPt(point) );
2008-01-23 22:36:37 +00:00
}
}
}
2008-01-24 21:47:54 +00:00
// keepouts could go here, there are none in Kicad at this time.
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
//-----<build the images, components, and netlist>-----------------------
2008-01-23 22:36:37 +00:00
{
2008-02-29 06:49:34 +00:00
PIN_REF empty( pcb->network );
std::string componentId;
2008-02-14 01:07:52 +00:00
// find the highest numbered netCode within the board.
int highestNetCode = aBoard->GetNetCount() - 1;
2008-02-14 01:07:52 +00:00
deleteNETs();
2008-01-24 21:47:54 +00:00
2008-02-14 01:07:52 +00:00
// expand the net vector to highestNetCode+1, setting empty to NULL
nets.resize( highestNetCode+1, NULL );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
// skip netcode = 0
for( unsigned i=1; i<nets.size(); ++i )
nets[i] = new NET( pcb->network );
2008-01-29 16:45:14 +00:00
for( unsigned ii = 0; ii < aBoard->GetNetCount(); ii++ )
2008-02-14 01:07:52 +00:00
{
NETINFO_ITEM* net = aBoard->FindNet(ii);
int netcode = net->GetNet();
2008-02-14 01:07:52 +00:00
if( netcode > 0 )
nets[ netcode ]->net_id = TO_UTF8( net->GetNetname() );
2008-02-14 01:07:52 +00:00
}
2008-02-07 20:23:58 +00:00
2008-01-24 21:47:54 +00:00
items.Collect( aBoard, scanMODULEs );
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
padstackset.clear();
2008-01-24 21:47:54 +00:00
for( int m=0; m<items.GetCount(); ++m )
2008-01-23 22:36:37 +00:00
{
2008-01-24 21:47:54 +00:00
MODULE* module = (MODULE*) items[m];
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
IMAGE* image = makeIMAGE( aBoard, module );
componentId = TO_UTF8( module->GetReference() );
2008-02-29 06:49:34 +00:00
2008-02-14 01:07:52 +00:00
// create a net list entry for all the actual pins in the image
// for the current module. location of this code is critical
// because we fabricated some pin names to ensure unique-ness
2008-02-29 06:49:34 +00:00
// of pin names within a module, do not move this code because
// the life of this 'IMAGE* image' is not necessarily long. The
2008-02-14 01:07:52 +00:00
// exported netlist will have some fabricated pin names in it.
// If you don't like fabricated pin names, then make sure all pads
// within your MODULEs are uniquely named!
for( unsigned p=0; p<image->pins.size(); ++p )
{
PIN* pin = &image->pins[p];
int netcode = pin->kiNetCode;
if( netcode > 0 )
{
NET* net = nets[netcode];
net->pins.push_back( empty );
PIN_REF& pin_ref = net->pins.back();
2008-02-29 06:49:34 +00:00
pin_ref.component_id = componentId;
2008-02-14 01:07:52 +00:00
pin_ref.pin_id = pin->pin_id;
}
}
2008-01-29 16:45:14 +00:00
2008-02-07 20:23:58 +00:00
IMAGE* registered = pcb->library->LookupIMAGE( image );
if( registered != image )
2008-01-24 21:47:54 +00:00
{
// If our new 'image' is not a unique IMAGE, delete it.
2008-02-14 01:07:52 +00:00
// and use the registered one, known as 'image' after this.
2008-01-29 16:45:14 +00:00
delete image;
2008-02-14 01:07:52 +00:00
image = registered;
2008-01-29 16:45:14 +00:00
}
2008-02-14 01:07:52 +00:00
COMPONENT* comp = pcb->placement->LookupCOMPONENT( image->GetImageId() );
2008-02-07 20:23:58 +00:00
PLACE* place = new PLACE( comp );
comp->places.push_back( place );
2008-02-07 20:23:58 +00:00
2012-02-19 04:02:19 +00:00
place->SetRotation( module->GetOrientation()/10.0 );
place->SetVertex( mapPt( module->m_Pos ) );
2008-02-29 06:49:34 +00:00
place->component_id = componentId;
place->part_number = TO_UTF8( module->GetValue() );
2008-02-07 20:23:58 +00:00
// module is flipped from bottom side, set side to T_back
2008-02-05 02:13:16 +00:00
if( module->flag )
{
2012-02-19 04:02:19 +00:00
int angle = 1800 - module->GetOrientation();
2008-02-05 02:13:16 +00:00
NORMALIZE_ANGLE_POS(angle);
place->SetRotation( angle/10.0 );
2008-02-07 20:23:58 +00:00
place->side = T_back;
2008-02-05 02:13:16 +00:00
}
2008-01-29 16:45:14 +00:00
}
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
// copy the SPECCTRA_DB::padstackset to the LIBRARY. Since we are
// removing, do not increment the iterator
for( PADSTACKSET::iterator i=padstackset.begin(); i!=padstackset.end();
i=padstackset.begin() )
{
PADSTACKSET::auto_type ps = padstackset.release( i );
PADSTACK* padstack = ps.release();
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
pcb->library->AddPadstack( padstack );
}
2008-02-07 20:23:58 +00:00
2008-02-14 01:07:52 +00:00
// copy our SPECCTRA_DB::nets to the pcb->network
for( unsigned n=1; n<nets.size(); ++n )
{
NET* net = nets[n];
2008-02-29 06:49:34 +00:00
if( net->pins.size() )
2008-02-14 01:07:52 +00:00
{
// give ownership to pcb->network
pcb->network->nets.push_back( net );
nets[n] = 0;
}
}
}
2008-02-07 20:23:58 +00:00
//-----< output vias used in netclasses and as stock >---------------------
2008-02-14 01:07:52 +00:00
{
NETCLASSES& nclasses = aBoard->m_NetClasses;
2008-02-07 20:23:58 +00:00
// Add the via from the Default netclass first. The via container
// in pcb->library preserves the sequence of addition.
2008-02-14 01:07:52 +00:00
NETCLASS* netclass = nclasses.GetDefault();
PADSTACK* via = makeVia( netclass->GetViaDiameter(), netclass->GetViaDrill(),
0, aBoard->GetCopperLayerCount()-1 );
2008-02-07 20:23:58 +00:00
// we AppendVia() this first one, there is no way it can be a duplicate,
// the pcb->library via container is empty at this point. After this,
// we'll have to use LookupVia().
wxASSERT( pcb->library->vias.size() == 0 );
pcb->library->AppendVia( via );
// output the stock vias, but preserve uniqueness in the via container by
// using LookupVia().
for( unsigned i=0; i < aBoard->m_ViasDimensionsList.size(); ++i )
{
int viaSize = aBoard->m_ViasDimensionsList[i].m_Diameter;
int viaDrill = aBoard->m_ViasDimensionsList[i].m_Drill;
2008-02-07 20:23:58 +00:00
via = makeVia( viaSize, viaDrill,
0, aBoard->GetCopperLayerCount()-1 );
// maybe add 'via' to the library, but only if unique.
PADSTACK* registered = pcb->library->LookupVia( via );
if( registered != via )
delete via;
}
// set the "spare via" index at the start of the
// pcb->library->spareViaIndex = pcb->library->vias.size();
// output the non-Default netclass vias
for( NETCLASSES::iterator nc = nclasses.begin(); nc != nclasses.end(); ++nc )
{
netclass = nc->second;
via = makeVia( netclass->GetViaDiameter(), netclass->GetViaDrill(),
0, aBoard->GetCopperLayerCount()-1 );
// maybe add 'via' to the library, but only if unique.
PADSTACK* registered = pcb->library->LookupVia( via );
if( registered != via )
delete via;
}
}
2008-01-30 19:16:46 +00:00
2008-02-14 01:07:52 +00:00
2008-02-03 21:46:12 +00:00
#if 1 // do existing wires and vias
2008-01-30 19:16:46 +00:00
//-----<create the wires from tracks>-----------------------------------
{
// export all of them for now, later we'll decide what controls we need
// on this.
static const KICAD_T scanTRACKs[] = { PCB_TRACE_T, EOT };
2008-02-07 20:23:58 +00:00
2008-01-30 19:16:46 +00:00
items.Collect( aBoard, scanTRACKs );
2008-01-31 01:30:52 +00:00
2008-02-07 20:23:58 +00:00
std::string netname;
2008-01-31 06:46:31 +00:00
WIRING* wiring = pcb->wiring;
PATH* path = 0;
2008-01-31 01:30:52 +00:00
2008-02-07 20:23:58 +00:00
int old_netcode = -1;
int old_width = -1;
int old_layer = -1;
2008-01-31 01:30:52 +00:00
2008-01-30 19:16:46 +00:00
for( int i=0; i<items.GetCount(); ++i )
{
2008-01-31 06:46:31 +00:00
TRACK* track = (TRACK*) items[i];
2008-02-07 20:23:58 +00:00
2008-02-29 06:49:34 +00:00
int netcode = track->GetNet();
if( netcode == 0 )
2008-01-31 01:30:52 +00:00
continue;
2008-02-29 06:49:34 +00:00
if( old_netcode != netcode
2008-02-07 20:23:58 +00:00
|| old_width != track->m_Width
2008-01-31 06:46:31 +00:00
|| old_layer != track->GetLayer()
2008-02-07 20:23:58 +00:00
|| (path && path->points.back() != mapPt(track->m_Start) )
)
2008-01-31 01:30:52 +00:00
{
2008-01-31 06:46:31 +00:00
old_width = track->m_Width;
old_layer = track->GetLayer();
2008-01-31 01:30:52 +00:00
2008-02-29 06:49:34 +00:00
if( old_netcode != netcode )
2008-01-31 01:30:52 +00:00
{
2008-02-29 06:49:34 +00:00
old_netcode = netcode;
NETINFO_ITEM* net = aBoard->FindNet( netcode );
wxASSERT( net );
netname = TO_UTF8( net->GetNetname() );
2008-01-31 01:30:52 +00:00
}
2008-01-31 06:46:31 +00:00
WIRE* wire = new WIRE( wiring );
wiring->wires.push_back( wire );
2008-02-01 01:09:39 +00:00
wire->net_id = netname;
2008-02-07 20:23:58 +00:00
2008-02-21 06:04:32 +00:00
wire->wire_type = T_protect; // @todo, this should be configurable
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
int kiLayer = track->GetLayer();
int pcbLayer = kicadLayer2pcb[kiLayer];
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
path = new PATH( wire );
wire->SetShape( path );
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
path->layer_id = layerIds[pcbLayer];
path->aperture_width = scale( old_width );
path->AppendPoint( mapPt( track->m_Start ) );
2008-01-31 01:30:52 +00:00
}
2008-02-07 20:23:58 +00:00
2008-01-31 06:46:31 +00:00
path->AppendPoint( mapPt( track->m_End ) );
2008-01-30 19:16:46 +00:00
}
2008-02-01 01:09:39 +00:00
}
2008-02-07 20:23:58 +00:00
2008-02-09 08:34:45 +00:00
//-----<export the existing real BOARD instantiated vias>-----------------
2008-02-01 01:09:39 +00:00
{
// export all of them for now, later we'll decide what controls we need
// on this.
static const KICAD_T scanVIAs[] = { PCB_VIA_T, EOT };
2008-02-07 20:23:58 +00:00
2008-02-01 01:09:39 +00:00
items.Collect( aBoard, scanVIAs );
2008-02-07 20:23:58 +00:00
2008-02-01 01:09:39 +00:00
for( int i=0; i<items.GetCount(); ++i )
{
SEGVIA* via = (SEGVIA*) items[i];
wxASSERT( via->Type() == PCB_VIA_T );
2008-02-07 20:23:58 +00:00
2008-02-21 06:04:32 +00:00
int netcode = via->GetNet();
if( netcode == 0 )
continue;
2008-02-01 01:09:39 +00:00
PADSTACK* padstack = makeVia( via );
PADSTACK* registered = pcb->library->LookupVia( padstack );
// if the one looked up is not our padstack, then delete our padstack
// since it was a duplicate of one already registered.
2008-02-01 01:09:39 +00:00
if( padstack != registered )
{
delete padstack;
}
WIRE_VIA* dsnVia = new WIRE_VIA( pcb->wiring );
pcb->wiring->wire_vias.push_back( dsnVia );
2008-02-07 20:23:58 +00:00
2008-02-01 01:09:39 +00:00
dsnVia->padstack_id = registered->padstack_id;
dsnVia->vertexes.push_back( mapPt( via->GetPosition() ) );
2008-02-07 20:23:58 +00:00
NETINFO_ITEM* net = aBoard->FindNet( netcode );
wxASSERT( net );
2008-02-07 20:23:58 +00:00
dsnVia->net_id = TO_UTF8( net->GetNetname() );
2008-02-07 20:23:58 +00:00
2008-02-21 06:04:32 +00:00
dsnVia->via_type = T_protect; // @todo, this should be configurable
2008-02-01 01:09:39 +00:00
}
}
2008-02-07 20:23:58 +00:00
#endif // do existing wires and vias
2008-02-01 01:09:39 +00:00
//-----<via_descriptor>-------------------------------------------------
{
// The pcb->library will output <padstack_descriptors> which is a combined
// list of part padstacks and via padstacks. specctra dsn uses the
// <via_descriptors> to say which of those padstacks are vias.
// Output the vias in the padstack list here, by name only. This must
2008-02-01 01:09:39 +00:00
// be done after exporting existing vias as WIRE_VIAs.
VIA* vias = pcb->structure->via;
2008-02-01 01:09:39 +00:00
for( unsigned viaNdx=0; viaNdx < pcb->library->vias.size(); ++viaNdx )
2008-02-01 01:09:39 +00:00
{
vias->AppendVia( pcb->library->vias[viaNdx].padstack_id.c_str() );
2008-02-01 01:09:39 +00:00
}
2008-01-30 19:16:46 +00:00
}
2008-02-01 01:09:39 +00:00
2008-02-07 20:23:58 +00:00
2009-09-10 15:22:26 +00:00
//-----<output NETCLASSs>----------------------------------------------------
NETCLASSES& nclasses = aBoard->m_NetClasses;
exportNETCLASS( nclasses.GetDefault(), aBoard );
2009-09-10 15:22:26 +00:00
for( NETCLASSES::iterator nc = nclasses.begin(); nc != nclasses.end(); ++nc )
2008-02-29 06:49:34 +00:00
{
2009-09-10 15:22:26 +00:00
NETCLASS* netclass = nc->second;
exportNETCLASS( netclass, aBoard );
2009-09-10 15:22:26 +00:00
}
}
2008-02-29 06:49:34 +00:00
void SPECCTRA_DB::exportNETCLASS( NETCLASS* aNetClass, BOARD* aBoard )
2009-09-10 15:22:26 +00:00
{
/* From page 11 of specctra spec:
Routing and Placement Rule Hierarchies
Routing and placement rules can be defined at multiple levels of design
specification. When a routing or placement rule is defined for an object at
multiple levels, a predefined routing or placement precedence order
automatically determines which rule to apply to the object. The routing rule
precedence order is
pcb < layer < class < class layer < group_set < group_set layer < net <
net layer < group < group layer < fromto < fromto layer < class_class <
class_class layer < padstack < region < class region < net region <
class_class region
A pcb rule (global rule for the PCB design) has the lowest precedence in the
hierarchy. A class-to-class region rule has the highest precedence. Rules
set at one level of the hierarchy override conflicting rules set at lower
levels. The placement rule precedence order is
pcb < image_set < image < component < super cluster < room <
room_image_set < family_family < image_image
A pcb rule (global rule for the PCB design) has the lowest precedence in the
hierarchy. An image-to-image rule has the highest precedence. Rules set at
one level of the hierarchy override conflicting rules set at lower levels.
*/
char text[256];
2008-02-29 06:49:34 +00:00
2009-09-10 15:22:26 +00:00
CLASS* clazz = new CLASS( pcb->network );
pcb->network->classes.push_back( clazz );
2008-02-29 06:49:34 +00:00
2009-09-10 15:22:26 +00:00
// freerouter creates a class named 'default' anyway, and if we
// try and use that, we end up with two 'default' via rules so use
// something else as the name of our default class.
clazz->class_id = TO_UTF8( aNetClass->GetName() );
2008-02-29 06:49:34 +00:00
2009-09-10 15:22:26 +00:00
for( NETCLASS::iterator net = aNetClass->begin(); net != aNetClass->end(); ++net )
clazz->net_ids.push_back( TO_UTF8( *net ) );
2008-02-14 15:34:40 +00:00
2009-09-10 15:22:26 +00:00
clazz->rules = new RULE( clazz, T_rule );
// output the track width.
int trackWidth = aNetClass->GetTrackWidth();
sprintf( text, "(width %.6g)", scale( trackWidth ) );
clazz->rules->rules.push_back( text );
// output the clearance.
int clearance = aNetClass->GetClearance();
sprintf( text, "(clearance %.6g)", scale( clearance ) + safetyMargin );
clazz->rules->rules.push_back( text );
if( aNetClass->GetName() == NETCLASS::Default )
{
clazz->class_id = "kicad_default";
}
// the easiest way to get the via name is to create a via (which generates
// the name internal to the PADSTACK), and then grab the name and then
// delete the via. There are not that many netclasses so
// this should never become a performance issue.
PADSTACK* via = makeVia( aNetClass->GetViaDiameter(), aNetClass->GetViaDrill(),
0, aBoard->GetCopperLayerCount()-1 );
snprintf( text, sizeof(text), "(use_via %s)", via->GetPadstackId().c_str() );
clazz->circuit.push_back( text );
delete via;
2008-02-14 15:34:40 +00:00
}
2008-02-29 06:49:34 +00:00
void SPECCTRA_DB::FlipMODULEs( BOARD* aBoard )
2008-02-14 15:34:40 +00:00
{
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
module->flag = 0;
if( module->GetLayer() == LAYER_N_BACK )
2008-02-14 15:34:40 +00:00
{
2009-08-06 07:11:04 +00:00
module->Flip( module->m_Pos );
2008-02-14 15:34:40 +00:00
module->flag = 1;
}
}
modulesAreFlipped = true;
}
void SPECCTRA_DB::RevertMODULEs( BOARD* aBoard )
{
if( !modulesAreFlipped )
return;
2008-02-07 20:23:58 +00:00
// DSN Images (=KiCad MODULES and pads) must be presented from the
2008-01-25 22:03:36 +00:00
// top view. Restore those that were flipped.
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( module->flag )
{
2009-08-06 07:11:04 +00:00
module->Flip( module->m_Pos );
2008-01-25 22:03:36 +00:00
module->flag = 0;
}
}
2008-02-14 15:34:40 +00:00
modulesAreFlipped = false;
2008-01-22 20:48:02 +00:00
}
2008-02-07 20:23:58 +00:00
2008-01-21 21:24:39 +00:00
} // namespace DSN