3d1d432c5e
PCB Editor: re-add missing color to dynamic ratsnest
2022-07-12 19:36:51 -04:00
664bf1382d
PNS: Fix IsLineCorner logic
...
Handle segment width test in the case of locked segs
Fix logic failure where vias on path cause crash
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11990
(cherry picked from commit 2512375988
2022-07-12 02:49:24 +00:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
b8479bf6f1
Handle severity ignore rules in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11609
2022-07-09 11:24:47 -06:00
0cb5abd7f7
Fix highlight on route again
...
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
3111b7679d
router: bring back the snap-to-hull behaviour in Mark Obstacles mode
2022-07-03 23:59:27 +02:00
f48ed79039
Rely on DRC rules when items might overlap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-29 13:43:44 -06:00
833dc70bff
Add edge-exclusions to router (for castellated pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-27 15:16:37 -06:00
f5fe1d5462
router: another attempt at improving 'kink' robustness of the hull generator
2022-06-09 20:51:21 +02:00
56df462474
router: fix SegmentHull() corner case when it 'chamfers' more than the clearance permits (corner case for 0-length segments, which we use
...
for representing holes)
2022-06-09 00:33:08 +02:00
990281a897
router: use either copper or hole clearance, whichever is larger, when checking track -> hole collisions
2022-06-09 00:31:47 +02:00
4192c0a709
router: move IsFlashedOnLayer to the IFACE_BASE class so that it can be used in the debugger tool
2022-06-09 00:30:57 +02:00
bcfe12ce47
router: improvements in robustness of SegmentHull()
...
- ensure the 'chamfer' radius and clearance is rounded before computing the actual hull vertices
- for small, non-45 degree line segments (present in many boards), generate a slightly larger but still axis-aligned 45 degree hull instead of following exactly the segment direction
2022-06-08 14:28:31 +02:00
e90ab055b9
router: remove unused LINE::Is45Degree()
2022-06-08 14:28:31 +02:00
30fb298ed3
PNS: Re-enable hole clearance for non-flashed pads/vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11098
2022-06-07 19:49:38 -04:00
23596812b6
PNS: Implement HoleHull for VIA
2022-06-07 19:49:38 -04:00
9f38fa43cd
Fix some minor compil and Coverity warnings.
2022-06-05 11:44:49 +02:00
3747369aaa
PNS: Remove offsets from hull generation
...
This is likely an old workaround to numerical precision issues
in the DRC system that no longer exist. Removing this is necessary
for "exact" hull generation to produce walkaround results that
look nice (paths falling exactly on the grid lines)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 5d4e2aa595
2022-06-04 00:04:03 -04:00
9a2950cca1
PNS: Use exact hulls for walkaround path generation
...
When we generate hulls, by default we subtract the clearance epsilon
to prevent false collisions in the router that wouldn't be flagged
by DRC. However, we need to use the actual hull with no epsilon
when generating hulls for pathfinding in the walkaround system.
Without this change, it is possible for the walkaround to generate
a valid-seeming path that results in a DRC violation, for example
when dragging a drag against a board edge.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10536
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11365
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 2a91ba35c1
2022-06-04 00:04:03 -04:00
c8b93c39b6
router: remove some old cruft from the WALKAROUND class
2022-06-03 23:28:41 +02:00
0bd7f603a3
router: consider mouse drag event a valid route start/end event
...
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
eaee610fd9
router: save project settings together with the debug log
2022-06-03 23:28:41 +02:00
f73acbb206
router: derive VIA class from LINKED_ITEM interface
2022-06-03 23:28:41 +02:00
cab08f859a
router: cluster extraction should only consider objects that are touching (instead of checking clearance)
2022-06-03 23:28:41 +02:00
297c60923e
router: return routing status from ROUTER::Move()
2022-06-03 23:28:41 +02:00
54f4f765b9
router: NODE|ITEM::QueryColliding() now can override clearance
...
Needed for clustering algorithm (to be committed later... ;-)
2022-06-03 23:28:41 +02:00
aca9cce5d5
router: more verbose debug messages for the debugger tool
2022-06-03 23:28:41 +02:00
2a0accd184
router: shove algorithm now considers cases where a small via sits 'inside' a fanout of wide (width > via diameter) segments.
...
The shove algorithm can't move the loose track ends. It always needs a via. In case of wide segments stitched with
a small via, the collision search finds only colliding segments and does not consider the via. This leads to frequent shove falilures
or 'choppy' behaviour when the head line only slightly overlaps with an end of a thick trace. This patch attempts at improving this behaviour
by considering the 'tiny via in wide segment' case explicitly.
2022-06-03 23:28:41 +02:00
08647bf035
router: temporarily disable via hole clearance check in the shove algorithm.
...
- needs refinements and additional checks for corner cases.
- disabled also to facilitate debugging of other shove bugs
2022-06-03 23:28:40 +02:00
8cb65a8a13
router: default values for LOGGER::Log()
2022-06-03 23:28:40 +02:00
752ba2ed76
router: log via toggle events
2022-06-03 23:28:40 +02:00
a4ad47cd08
router: use SHAPEs and PNS::ITEMs only in the ROUTER_PREVIEW_ITEM
2022-06-03 23:28:40 +02:00
b08280d00c
router: enable Hole Clearance rule only in Mark Obstacles mode
...
(it will be brought back to Walk/Shove modes as soon as all the underlying issues are fixed)
2022-06-03 23:28:40 +02:00
40593930d0
PNS: Fix off-by-one in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10919
(cherry picked from commit 8d8f96b094
2022-06-01 21:13:05 +00:00
6fd14ac945
[PNS] Fix invalid assumption in IsLineCorner
...
(cherry picked from commit a4aa447b95
2022-05-31 20:24:54 -04:00
9470bd15a1
PNS: Fix skew calculation with pad-to-die specified
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11710
(cherry picked from commit 53dbd3bb02
2022-05-31 20:24:54 -04:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
adace996f4
qa/pns: refactored the P&S debug tool:
...
- factored out 'business' code from the UI code
- moved to the new DEBUG_DECORATOR interface
- UI-less log file and log player classes as a step towards P&S unit tests
2022-03-03 01:02:00 +01:00
45f7cf9571
router: rework the DEBUG_DECORATOR a bit:
...
- support for dumping complete PNS::ITEMs and generic SHAPEs
- support for log nesting levels
- wxT-ized strings
- more verbose output where needed
2022-03-03 01:02:00 +01:00
4d6c2e4868
Update end item before moving on track/via change
...
The move even dereferences m_enditem for logging and perhaps other
actions. We need to ensure that the end item has not been invalidated
before taking this action
Fixes https://gitlab.com/kicad/code/kicad/issues/10732
(cherry picked from commit 901c330478
2022-03-02 09:23:15 -08:00
639fdb915a
Implement real layer test for visibility.
2022-02-24 21:32:43 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
8dcc933fc3
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-02-12 18:38:11 +00:00
0a5ddb8d40
Add some vector reservations
2022-02-05 21:12:29 -05:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
92dc06ac9d
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
(cherry picked from commit 901685f01b
2022-02-03 10:35:31 -08:00
803675195d
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 833ce19221
2022-01-31 16:13:53 -08:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
ad84b62b63
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 38a4894d92
2022-01-29 07:07:29 -08:00
7277fd6218
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 8ae304dcca
2022-01-28 15:19:06 -08:00
441e5fd486
router: don't reject non-45 degree lines in the LINE_PLACER
2022-01-22 00:28:11 +01:00
ce28525172
router: include arc approximation tollerance in arc hull clearance calculation
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/10470
2022-01-22 00:28:11 +01:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
e61144d45a
Finish with EDA_ANGLE.
2022-01-16 21:15:40 +00:00
e84c574830
Some more EDA_ANGLE cleanup.
2022-01-16 19:16:18 +00:00
1539fa5af2
Move SHAPE_ARC to EDA_ANGLE.
2022-01-16 01:19:45 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
eac1936303
PNS: Do not clear layer pairs when importing new sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10225
(cherry picked from commit 20bbf9b179
2022-01-13 20:38:08 -05:00
3011ae1d51
PNS: Do not allow smart pads when in 90-degree mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10386
(cherry picked from commit cf4d46b24d
2022-01-13 20:38:01 -05:00
79fe0bf456
router: use VIA::PushoutForce() for via push force calculation in the shove algorithm
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10317
2022-01-13 00:43:27 +01:00
4d0a317e3d
router: fix via force propagation for vias where hole clearance > copper clearance
2022-01-13 00:42:50 +01:00
eb58d7e44c
Text glyph caches and bug fixes.
...
1) Unify metrics between stroke and outline fonts
2) Unify handling of rotation and mirroring
3) Bug fixes in collision handling
4) Use of VECTOR2I (instead of VECTOR2D) for world-coordinates
5) Generate outline font overbar with rounded ends and fix rotation
bugs
6) Generate wxEVT_CHOICE events from FONT_CHOICE::SetFontSelection
7) Change text-item PNS SOLIDs to use compound shapes
2022-01-08 16:47:45 +00:00
72340fcee2
Implement router and DRC collisions for outline fonts.
2022-01-08 16:47:45 +00:00
60c0891c5f
Exit router and invoke edit tool when attempting to drag an arc track
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10208
(cherry picked from commit 45182febaf
2022-01-02 16:10:50 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
f744ddd11d
Fix copy-paste error in PNS mouse trail tracer
...
And also fix indentation of control flow.
2021-12-31 00:04:11 +00:00
0e9cfd0af2
Add missing initialization values to variables
...
Flagged by Coverity.
2021-12-30 23:42:06 +00:00
5e4a704155
Remove some more duplicated preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
2538ad16aa
Handle router collisions with filled shapes.
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
9ee28ea8f5
Flatten out some more preferences.
2021-12-24 15:43:20 +00:00
57af990066
router: fix layer switch issue when starting a track on via without fixed segments
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9915
2021-12-16 00:55:17 +01:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
97c2627de6
router: added missing case items (fixes regression in component dragging)
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10010
2021-12-15 23:18:55 +01:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
2ae3a83b54
router: fix use-after-free crash in single trace shove routing when m_endItem's owning NODE is erased by the springback algorithm.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9994
2021-12-15 01:33:05 +01:00
b291d6c810
Fix success conditions in DP placer
...
The placer can sometimes generate segments that are not quite parallel.
Use a different tolerance for ApproxParallel to account for this.
Also set a minimum score for placement judging so that any placement
that doesn't violate DRC can be placed.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9948
2021-12-12 13:05:38 -05:00
6d0d4e0db9
Pcbnew, router tool: ensure switching layer by + or - works when starting routing.
...
Fixes #9936
https://gitlab.com/kicad/code/kicad/issues/9936
2021-12-11 09:54:03 +01:00
77fbb495f2
Highlight net during inline drag
...
Keep consistent UX between inline drag and drag started in the router
tool itself by highlighting the net being dragged
Fixes https://gitlab.com/kicad/code/kicad/issues/9919
2021-12-09 09:28:43 -08:00
95087c6de5
Fix clearance outlines for router head.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9885
2021-12-06 15:51:53 +00:00
5ba215c8ea
Use actual width when previewing PNS lines
2021-12-05 13:41:39 -05:00
7de9e48b57
PNS: Fix tuning calculations through locked segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9727
2021-12-05 13:35:28 -05:00
5cb2641142
Fix nullptr dereference in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9844
2021-12-02 13:20:44 +00:00
a596a1f2e2
ROUTER_TOOL needs to handle pads not handled by router itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9839
2021-12-01 22:25:02 +00:00
3c0b10b022
Don't use approximated shapes for router hulls.
...
We only do 45-degree routing anyway so we might as well build an
octagonal-based hull from the get-go.
Fixes https://gitlab.com/kicad/code/kicad/issues/7672
Fixes https://gitlab.com/kicad/code/kicad/issues/9544
Fixes https://gitlab.com/kicad/code/kicad/issues/9833
2021-12-01 19:44:30 +00:00
09ed60feb3
Don't make inferences about object type based on shape.
2021-12-01 19:44:30 +00:00
63560ecd7b
Remove RM_Smart state from router tool
...
It was never fully implemented and there was no way to switch into this
route mode.
2021-12-01 09:52:37 +00:00
a746d31038
PNS: Fix loop removal outside shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9680
2021-11-27 15:21:47 -05:00
8a0f8c329f
PNS: Fix DP gateway generation when pad distance < gap
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9306
2021-11-27 14:03:19 -05:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
6652e5acf4
Draw pad holes when dragging.
...
Most of the time they're under the pad, but the provide needed
info when the hole is larger than the pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:09 +00:00
9547c72e73
Teach router about different keepout rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9786
2021-11-27 00:55:04 +00:00
Mike Williams
Jon Evans
Jeff Young
Seth Hillbrand
Tomasz Wlostowski
jean-pierre charras
Wayne Stambaugh
Marek Roszko
Ian McInerney