ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
34e134c5e5
Don't allow clearanceEpsilon to force clearance < 0.
...
Also, a plated hole has the max clearance of hole_clearance and
copper_clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/13237
2022-12-24 12:56:41 +00:00
59f0e428fa
Fix a PnS router issue doesn't respect knockout texts.
...
Fixes #13251
https://gitlab.com/kicad/code/kicad/issues/13251
2022-12-23 18:17:44 +01:00
e8f755c665
router: Match segment endpoint calculation between dragger and the tool.
...
Prevents always picking point A when dragging short segments.
2022-12-21 20:55:49 +03:00
161a1e21f5
PnS router: NPTH can be on copper layers, depending of the pad size and the hole size.
...
Now: round NPTH with a round hole bigger than the pad are not on a copper layer.
Other pas shapes are seen on copper layers (far from ideal, but reasonable)
Fixes #13214
https://gitlab.com/kicad/code/kicad/issues/13214
2022-12-20 12:50:22 +01:00
82874daf08
router: Limit the amount of move attempts in ROUTER::Finish
...
Otherwise auto-finish hangs in some cases.
2022-12-07 19:24:13 +03:00
008704fc6f
router: Allow highlighting both DP nets when routing.
2022-12-06 05:24:23 +03:00
90ad4dcc05
router: Various bugfixes in length tuning meandering
...
- When fine-tuning, keep adjust to the original baseline length
- Enforce a minimum amplitude based on settings, DP gap and track width
- Use binary search to fine-tune amplitude if the length is not trivial
- Account for inequalities in balancing
- Don't add the meander if adding it with min. amplitude will make the
tuning worse
- Keep a distance after meandering end to prevent overlaps in DP
Fixes https://gitlab.com/kicad/code/kicad/issues/9267
Fixes https://gitlab.com/kicad/code/kicad/issues/1776
2022-12-04 16:30:00 +00:00
e56064696b
router: Refactor m_padToDieLength out of meander placer base.
2022-12-02 01:03:34 +03:00
1aa05c0e10
router: Fix up single meander side switching.
2022-12-01 18:39:19 +03:00
7dbdb68730
router: ADDED option to create single-sided meanders.
2022-11-30 20:39:02 +00:00
7a9467b0d5
Get rid of some gcc warnings
2022-11-24 17:05:58 -05:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
24c271d508
router: GetUpdatedItems() now returns an unique_ptr to the temporary NODE so that the items it owns do not get deleted upon return from the method
2022-11-18 15:14:33 +01:00
644c76b9c6
router: follow up via force propagation interface changes in the via DRAGGER
2022-11-18 15:14:09 +01:00
dcfb35f002
router: more resilient via force propagation
2022-11-18 15:14:09 +01:00
3dea146488
router: Clear rule resolver caches on routing/dragging start.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-17 02:10:21 +05:00
3f790d9dae
Revert "router: Disable writing clearance cache for items in local variables."
...
This reverts commit 6d71f27500
2022-11-17 02:10:20 +05:00
6d71f27500
router: Disable writing clearance cache for items in local variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-16 21:19:56 +05:00
26a38797c7
router: log and replay the 'unfix' events too
2022-11-15 23:05:53 +01:00
b507c44d74
router: fix regression in Backspace (unfix/undo last segment) caused by redesign of the line placement algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12835
2022-11-15 23:05:53 +01:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
126914859a
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
2022-11-13 21:07:09 +00:00
348c3d4216
Fix an incorrect calculation in length tuning tools.
...
MEANDER_PLACER_BASE::lineLength wasn't calculating the length correctly
when starting and ending pads were on different layers.
Naturally, now jointA corresponds to the start of the path, jointB to the end.
Fixes https://gitlab.com/kicad/code/kicad/issues/12881
2022-11-12 13:11:27 +00:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
a03799c61e
Don't mark collisions on dragged items, only things they collide with.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8965
2022-11-05 21:54:33 +00:00
a0105efc0c
router: major rewrite of shove/walkaround single line placement. An attempt to fix most router blockages/non-45 stray segments and simplar stuff. Also adds a ton of debug geometry cruft.
...
fixes: 12258
fixes: 12067
fixes: 10807
fixes: 10632
2022-10-31 11:38:31 +01:00
70bca1b2d5
router: allow caller to override the 'safety' length limit in WALKAROUND
2022-10-31 11:17:32 +01:00
363d606503
router: improved heuristics in via force propagation algorithm
2022-10-31 11:17:32 +01:00
1ddabd4eaf
router: some extra debug geometry dumps in SHOVE
2022-10-31 11:17:32 +01:00
165b5257e8
router: temporaily disable upper corner count limit constraint in the OPTIMIZER which prevents almost any optimization of shoved lines
2022-10-31 11:17:32 +01:00
e80bdf934a
router: add via force propagation iteration limit as a user-controllable parameter in ROUTING_SETTINGS
2022-10-31 11:17:32 +01:00
247922ca2d
router: LINE::SetShape() should update the attached via position with the last point of the new line shape
2022-10-31 11:17:32 +01:00
3e67b42efd
router: fix another corner case in LINE::Walkaround
2022-10-31 11:17:31 +01:00
65507e7186
router: extend dump format to support automatic regressions tests of interactive routing scenarios
2022-10-31 11:17:31 +01:00
01b4c20c94
Router only owns message panel when routing.
...
Also fixes a pair of copy/paste error not caught earlier.
Fixes https://gitlab.com/kicad/code/kicad/issues/12780
2022-10-28 22:51:43 +01:00
c026c3af7b
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12753
2022-10-25 18:28:31 +01:00
5fe5534822
Clean up layer handling and normalize to remove magic numbers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12747
2022-10-25 12:31:47 +01:00
2dec37f806
We must check clearance on all layers of multi-layer items.
...
(One layer may have a custom rule.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12733
2022-10-24 00:14:12 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
Jon Evans
Jeff Young
jean-pierre charras
Alex
Tomasz Wlostowski