Commit Graph

9139 Commits

Author SHA1 Message Date
Ian McInerney 17adb6c3c6 Add context menu to route and zone toolbar items
ADDED: Context menu for route and zone toolbar items
2020-06-26 21:29:03 +00:00
Ian McInerney fb10406e67 Add right-click context menus for toolbar items 2020-06-26 21:29:03 +00:00
Ian McInerney 52856a8ce4 Move scaled toolbar separator into ACTION_TOOLBAR
* Ensure all separators are scaled separators
* Clean up toolbar creation functions
2020-06-26 21:29:03 +00:00
Peter Montgomery 19b7755ab7 Coverted Gerbview files to version in master so hotkey_rollover repo only contains changes for the hotkey fix 2020-06-25 22:43:29 +00:00
Seth Hillbrand 4ef02fd699 Replace TTL delauney triangulator
Removes the TTL triangulator in favor of the delaunator triangulator.
This removes the only AGPL code in the KiCad codebase and therefore
allows the full project to be licensed under the GPLv3.
2020-06-25 18:45:27 +00:00
jean-pierre charras c9715ce304 class_pad.h: mark m_shapesDirty true after a move to force rebuild shapes after a move.
Fix also a few comments.

Fixes #4719
https://gitlab.com/kicad/code/kicad/issues/4719

Fixes #4720
https://gitlab.com/kicad/code/kicad/issues/4720
2020-06-25 20:07:51 +02:00
Seth Hillbrand a893d19d26 pcbnew: Allow slow ratsnest to turn off
Depending on where you move the selection, the slow ratsnest might turn
on.  This prevents that setting from being sticky, reverting to smooth
movement.
2020-06-24 17:16:07 -07:00
Seth Hillbrand b02d3f683f Adding documention comments for dynamic ratsnest 2020-06-24 15:17:01 -07:00
Seth Hillbrand 4c5f3cb5be Fix crash when moving non-connected
Non connected items do not have netcodes, so shouldn't be included in
the calculation for ratsnest
2020-06-24 14:22:01 -07:00
Jeff Young e376750f62 Flatten CS_PAD_PRIMITIVE out in favour of reusing DRAWSEGMENT.
(In prep for the eventual replacement of DRAWSEGMENT internals with
SHAPE.)
2020-06-24 12:22:42 +01:00
Seth Hillbrand 1a7c270dcd Fix invalid dereference on first highlight
When highlighting nets we don't save the previous net when there isn't a
previous net highlighted.
2020-06-23 20:36:05 -07:00
Seth Hillbrand 141bf4f579 Tighten the bicolored routine
Eliminates some duplicate code into a lambda
2020-06-23 16:48:24 -07:00
Seth Hillbrand e8fc421a39 Update NearestBicoloredPair to m log(n) search
Instead of iterating over full set, use sweep line algorithm to limit
the number of nodes needed to be searched.  This improves the speed of
the dynamic ratsnest.
2020-06-23 16:17:35 -07:00
Seth Hillbrand 214a9d53b0 Update ratsnest conn to multiset 2020-06-23 14:39:45 -07:00
Seth Hillbrand a2ad84f84d Revise Kruskal implementation
This updates the Kruskal algorithm to a faster variant utilizing a
compressed disjoint set and heap
2020-06-23 14:35:23 -07:00
Jon Evans 2ab9ceaf02 Pick up net for new zone from selection if no net is highlighted
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4706
2020-06-23 17:16:34 -04:00
Jeff Young 18ab3c4714 Fix missing user grid in COMMON_TOOLS.
Fixes https://gitlab.com/kicad/code/kicad/issues/4702
2020-06-23 11:17:15 +01:00
Seth Hillbrand 104ff29e5f Remove delauney computations from dynamic ratsnest
Avoids additional calculations on movement by using cached ratsnest for
internal nets and keeping bicolored line calc for others.

Fixes https://gitlab.com/kicad/code/kicad/issues/1865
2020-06-22 20:37:31 -07:00
Jeff Young d01b29ab37 Cleanup pad geometry handling.
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.

This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
Jeff Young c57c21f577 Pad bounding radius is from pad centre, NOT shape centre. 2020-06-22 20:36:54 +01:00
Jon Evans c0175c48af ADDED: Setting to control track mouse drag behavior
Default is now to perform a 45-degree drag
2020-06-21 15:39:39 -04:00
jean-pierre charras 55e283634a Pcbnew, DIALOG_PLOT_BASE: better warning message about non null solder mask margins. 2020-06-21 20:41:06 +02:00
Jon Evans 713cd4a47a Point editor: show dragged points with a highlight
Take points editor colors from color theme

Also fix an issue where the edited object sometimes didn't
update when a point is dragged.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4600
2020-06-21 14:43:41 -04:00
jean-pierre charras 7240b3e4d3 PCB_PAINTER for D_PAD: for round and oval shapes, use native gal draw functions,
instead of convert shapes to polygons.
For small pad sizes (< 0.5mm) the polygonal shape is really ugly.
Moreover, circles and oblong shapes are native in gal and give a much better look.
2020-06-21 19:47:26 +02:00
Jon Evans a16c9df79c Delete the right object in arc cleanup
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4694
2020-06-21 13:03:14 -04:00
jean-pierre charras ad69e449fe Fix a collision name in drawing_tool.h with a msys2 header 2020-06-21 10:36:01 +02:00
Jeff Young 970921f88b Support for filled DRAWSEGMENT::S_RECT and S_CIRCLE.
One more step in unifying pad primitives and draw segments.
2020-06-20 14:34:53 +01:00
Jeff Young 986c1a27cd Make sure line widths (and clearances) are handled on rectangles. 2020-06-20 14:34:53 +01:00
Jeff Young 7877e4083e Don't match to an unknown layer. 2020-06-20 14:34:53 +01:00
Jeff Young 9ba9f0288e Read files with rectangle primitives in custom pads. 2020-06-20 14:34:53 +01:00
Jon Evans 09cb75b8a1 Use a temporary file when saving boards/schematics to make the operation more atomic
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4517
2020-06-19 23:31:26 +00:00
Jeff Young b779715996 Don't whack original pad shape when converting to custom.
Rectangles and circles convert easily, but a chamfered rectangle
(for instance) needs more careful handling.
2020-06-19 14:10:41 +01:00
Jon Evans e91b9f6dfb Rip out the unused leftovers of the old color system 2020-06-18 22:32:14 -04:00
Seth Hillbrand 32738862b8 Fix build error in linux 2020-06-18 09:52:04 -07:00
Jeff Young 76d1b8bfa1 Make sure selectors match against user layer names.
Also allows for user specification of units in rule constraints.
2020-06-18 15:38:01 +01:00
Jeff Young cae493fe65 More infrastructure work for shape editor. 2020-06-18 15:38:01 +01:00
Jeff Young ee9d8fcd15 Collapse Pcbnew & ModEdit display and edit settings.
(Prep work for reusing them with a custom shape editor.)
2020-06-18 15:38:01 +01:00
Seth Hillbrand 08c61e6788 Ensure triangulation follows moving zone
Dragging filled zones in OpenGL was extremely slow due to the
invalidated triangulation cache.  Moving the zone should also move the
triangles and keep the cache valid.
2020-06-17 19:43:11 -07:00
Seth Hillbrand eb89d1c68b pcbnew: Minor update to ratsnest calc
BuildConnectivity updates the ratsnest after it completes.  By compiling
the ratsnest before connectivity, we update it twice with the dirty flag
being reset after connectivity updates.
2020-06-17 19:43:11 -07:00
Jeff Young f31139ac48 Don't copy from a running Pcbnew now that we have settings.
Also fixes an issue where if Pcbnew wasn't run before the symbol
chooser (with the footprint preview active) you'd get no grids (and
a crash on non-OSX platforms).

Fixes https://gitlab.com/kicad/code/kicad/issues/4670
2020-06-17 19:02:42 +01:00
Jeff Young a7703d1207 Cleanup Graphics to parallel Cleanup Tracks & Vias.
This also allows for easier migration to DRAWSEGMENT::S_RECTs by
auto-converting 4 rectilinear lines to a rectangle.
2020-06-17 18:44:39 +01:00
Jeff Young a3cab09fb4 Make it clearer that drawSegment() can modifiy the current seg pointer.
This might also quiet the Coverity warning, but I've also marked it as a
false positive (as it might still mess up on the new code).
2020-06-17 18:44:39 +01:00
jean-pierre charras 55c0bd7ae3 Remove a incorrect code, unfortunately not removed after another (old) code change. 2020-06-17 12:54:09 +02:00
Seth Hillbrand 8c57821e9b pcbnew: Move ratsnest items to separate folder 2020-06-16 11:15:14 -07:00
Jeff Young aeed8e6e2c Finish implementation of DRAWSEGMENT::C_RECT.
It's currently only supported in the Footprint Editor.  It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
Eli 2a334a5c59 Updates wording used in alignment submenu to make the actions clearer when icons are missing. Also reorganises the order of items in the submenu. 2020-06-15 16:49:36 +00:00
Jeff Young ad12c42e8b Push grid settings dialogs down into common.
This also gives support for fast grid switching and a user grid
to eeschema.

Fixes https://gitlab.com/kicad/code/kicad/issues/2200
2020-06-14 19:26:37 +01:00
jean-pierre charras b7ec66dc9b Gerber plotter: better choice of aperture attributes in internal layers. 2020-06-14 18:16:01 +02:00
jean-pierre charras a8d5d9b690 panel lib tables: avoid crash when deleting the last entry in list. 2020-06-14 17:39:32 +02:00
Seth Hillbrand 461d0e9a49 Unify rounding in altium to KiCad converter
This fixes an issue in the integer conversion that caused truncation
errors.  Handling the conversion from micromil to nanometer using
doubles keeps intermediate values correctly rounded.  There remain some
conversions that are lost where Altium rounded its metric
representation.
2020-06-14 07:53:15 -07:00
Seth Hillbrand 899496baaa pcbnew: Remove item from edit selection in favor of parent 2020-06-14 07:29:44 -07:00
Seth Hillbrand 491ac0256d pcbnew: Add a number of missing handles for module zones 2020-06-14 07:23:10 -07:00
Seth Hillbrand 09eee84a3e pcbnew: Handle module zone area in delete
Selections containing zone areas need to be handled separately by
modifying the parent rather than the item itself

Fixes https://gitlab.com/kicad/code/kicad/issues/4653
2020-06-14 07:05:14 -07:00
Jeff Young c48f4272f3 Collapse a level out of the zoom settings.
The APP_SETTINGS_BASE now holds the list of zoom factors, and
the old legacy (screen-based) code has been removed.
2020-06-13 22:44:16 +01:00
Jeff Young 47ab7c78a6 Divorce GRID_HELPER from the parent frame.
This moves GRID_HELPER fully into the tool framework.
2020-06-13 22:44:16 +01:00
Seth Hillbrand 4d4d24fc61 Don't snap to arc midpoints
This removes the extra snap points in the arcs, ensuring the endpoint
snaps connect to the correct location on an arc.
2020-06-13 11:23:14 -07:00
Seth Hillbrand a8ab668122 Move SHAPE_ARC to start->mid->end format
The arc shapes need to connect with their adjacent points.  By storing
the relevant points, we allow exact point matching on both ends of the
arc as well as localize point storage.
2020-06-13 11:23:14 -07:00
Seth Hillbrand 951eaa13fe pcbnew: Fix arc track length calculation 2020-06-13 11:23:14 -07:00
Jeff Young f84406009b Push a couple of layers of indirection out of grid settings. 2020-06-13 11:35:56 +01:00
jean-pierre charras 2b122892d3 DIALOG_PAD_PROPERTIES: fix some issues:
- fix many wxWidgets alerts.
- ensure pad offset wxTextCtrs are shown or not according to the wxCheckBox state.
- ensure there is room in dialog for some wxTextCtr when switched from Hide to Show
(resize it if it is too small)
2020-06-11 20:34:13 +02:00
Jeff Young 4629b701ea Fix spacing issue in Pad Properties. 2020-06-11 18:26:44 +01:00
Wayne Stambaugh c5fc1d4a7c More dialog clipped bitmap button fixes. 2020-06-11 07:31:50 -04:00
jean-pierre charras 8bd9b26717 ZONE_CONTAINER, display info: fix incorrect layer of zones on user layers.
Add also display on hatch count and filled polygons corner count, previously removed,
but useful for large and complex zones (that can take a lot of computation time
for DRC and display).
2020-06-10 21:01:44 +02:00
Wayne Stambaugh ee8cf01ff5 Pcbnew: fix issue when updating board from schematic.
Fixes https://gitlab.com/kicad/code/kicad/issues/4607
2020-06-10 14:21:46 -04:00
Jeff Young d7d877241a More explicit type conversion to attempt to fix GCC compile issue. 2020-06-10 13:41:45 +01:00
Jeff Young 4138c8554c Parse DRC rules when closing Board Setup dialog. 2020-06-10 12:03:37 +01:00
jean-pierre charras 2401ed587e eeschema, pcbnew: fix too narrow window showing the item color list
Fixes #4610
https://gitlab.com/kicad/code/kicad/issues/4610
2020-06-09 20:05:38 +02:00
Jan Mrázek 3091bb1459 eagle: Change font size calculation
Eagle includes stroke thickness into font size, KiCAD does not. Remove
the hack with scaling down the font, compute size precisely.

CHANGED: Fixed font calculation in Eagle import
2020-06-09 15:30:04 +00:00
Jan Mrázek e34a01dc68 eagle: Make semantics of cutout correct
Eagle cutout polygons only restrict filled copper, they do not limit
tracks, vias and pads inside them. Fix this behavior in the Eagle
import.

CHANGED: Fix semantics of Eagle cutout polygons
2020-06-09 15:30:04 +00:00
jean-pierre charras 64231a8491 fix a minor wxWidgets alert and a outdated comment. 2020-06-09 14:12:38 +02:00
jean-pierre charras f8967550a8 PANEL_FP_LIB_TABLE: fix incorrect size of the SPLIT_BUTTON.
This was due to use of a not yet calculated of a bitmap button.
At least on msw just after setting the bitmap of a bitmap button
the actual size is not yet calculated: it is calculated after calling Layout()
2020-06-08 10:19:31 +02:00
jean-pierre charras 27c80e8a2e Solder mask clearance default value: set default to 0, taking advice from
both Ucamco and Eurocircuits.
Update message in plot dialog about best solder mask clearance value.
Show warning in plot dialog if these values are no 0.
2020-06-07 11:10:28 +02:00
Thomas Pointhuber 25eb88636f eagle: handle TRESTRICT, BRESTRICT and VRESTRICT consistently 2020-06-07 00:16:04 +00:00
Thomas Pointhuber 23cc51a53f eagle: add support for tRestrict, bRestrict and vRestrict on circle
Fixes #1869
https://gitlab.com/kicad/code/kicad/-/issues/1869
2020-06-07 00:16:04 +00:00
Thomas Pointhuber 22860b6e7a eagle: add support for tRestrict, bRestrict and vRestrict on polygons
Fixes #2451
https://gitlab.com/kicad/code/kicad/-/issues/2451
2020-06-07 00:16:04 +00:00
Thomas Pointhuber 54decd8afb eagle: add support for tRestrict, bRestrict and vRestrict on rectangles
Fixes #2451
https://gitlab.com/kicad/code/kicad/-/issues/2451
2020-06-07 00:16:04 +00:00
Ian McInerney 9d0ea66a96 Don't use the accelerator table in the menubars
It seems that the accelerator table causes issues with
keyboard events on MSW.

Fixes https://gitlab.com/kicad/code/kicad/issues/1941
2020-06-06 22:50:35 +00:00
Jon Evans 94cd0cf3ad Fix accidental logic change to BOARD::InsertArea
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4474
2020-06-06 15:26:49 -04:00
jean-pierre charras 74051be3b7 pcbnew, DIALOG_PLOT: fix a cosmetice issue: a SVG option was sometimes shown
when the PDF plotter was selected.
2020-06-06 20:50:24 +02:00
Jon Evans 2cbae18598 Remove PCBNEW_SETTINGS dependence from PCB_PLOT_PARAMS 2020-06-06 13:57:28 -04:00
Paul Ewing 40250c427a Expose the footprint library table to Python 2020-06-05 22:21:41 +00:00
Jeff Young fb4f37f39c Inherit GAL settings from parent's GAL. 2020-06-05 19:07:23 +01:00
Jeff Young 80c0e0080f Move layout updating out of OnUpdateUI to prevent endless looping.
Fixes https://gitlab.com/kicad/code/kicad/issues/4623
2020-06-05 17:45:25 +01:00
Ian McInerney 4357c1d3b3 Coverity and compiler warning fixes
* Initialize variables
* Test dynamic casts

Fixes https://gitlab.com/kicad/code/kicad/issues/4620
2020-06-05 12:50:56 +01:00
Seth Hillbrand 1c46bf1955 PNS: Use segment shape for all oval pads
Instead of calculating a simple polygon for the oval pads that are
rotated, we use a rotated segment.

Fixes https://gitlab.com/kicad/code/kicad/issues/4604

(cherry picked from commit 25b8da8e3b)
2020-06-04 20:29:25 -07:00
Seth Hillbrand 674226f99f pcbnew: Set flag when cancelling during routing
Fixes https://gitlab.com/kicad/code/kicad/issues/4475
2020-06-04 15:48:01 -07:00
Seth Hillbrand e7dfa91525 pcbnew: Use duplicate structure to allow deleting
Removing items from the structure will invalidate the iterators so we
need to either stage the deletions or keep a duplicate structure for the
iteration.

Fixes https://gitlab.com/kicad/code/kicad/issues/4257
2020-06-04 10:44:36 -07:00
Jeff Young f4d8c30f9a Tighten DRC epsilon value until we decide what to do about it. 2020-06-04 18:28:48 +01:00
jean-pierre charras a29b3eb017 Eeschema, DIALOG_EDIT_ONE_FIELD: fix incorrect behavior for footprint field,
when initialized from the footprint viewer.

Fixes #4609
https://gitlab.com/kicad/code/kicad/issues/4609
2020-06-04 18:47:12 +02:00
Jeff Young 7876bab0e0 Implement another shape choice for Chamfer + Rounded. 2020-06-04 17:28:46 +01:00
Wayne Stambaugh 0032845f9e Fix clipped bitmap buttons with GTK on Linux.
A note to developers, please do not set the minimum and/or size of bitmap
buttons.  It causes bitmaps to get clipped using GTK on Linux.  If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want.  This almost always causes platform differences that do
not work well.
2020-06-03 14:01:44 -04:00
Jeff Young 36d197d8b6 Increase pad clearance test epsilon to polygonization max error.
Fixes https://gitlab.com/kicad/code/kicad/issues/4604
2020-06-03 18:47:19 +01:00
Jeff Young 8575afd7ef Adjust spacing in dialog for non-OSX platforms. 2020-06-03 16:34:09 +01:00
Jeff Young b8e4f4bfc4 Attempt #1 to fix layout issue on GTK (and perhaps MSW). 2020-06-03 16:28:08 +01:00
Ian McInerney a843c74529 Add new kiplatform library for platform-specific code
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively

This change means we no longer rely on the kicad-specific functions in our osx wx fork.
2020-06-03 14:58:54 +00:00
Jeff Young 7db4a3f702 Fix offset issue when pad edited from board instead of modEdit. 2020-06-03 13:50:50 +01:00
Jeff Young d2cd4de280 Allow rules to operate on hole when hole-to-track testing. 2020-06-03 12:11:50 +01:00
Jeff Young 3bd4c0c5dc Don't allow the pad preview canvas to become too large.
Also offset canvas with pad so that hole stays in centre.

Fixes https://gitlab.com/kicad/code/kicad/issues/4185
2020-06-02 22:51:41 +01:00
Jeff Young 9ff09aa784 Progressive disclosure pad properties. 2020-06-02 17:22:24 +01:00
Jeff Young 7aaf72c473 Improve visuals of html error reporting. 2020-06-01 22:00:03 +01:00
Jeff Young a76a1aefaa Update membership grid when a netclass name changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/4596
2020-06-01 22:00:03 +01:00
jean-pierre charras eae0c142fe Eeschema, DIALOG_PLOT_SCHEMATIC: fix incorrect unit of default pen width.
The default line width used to set the  default pen width is given in mils,
and the conversion to iu was missing.
Fix also a minor Coverity warning.

Fixes #4594
https://gitlab.com/kicad/code/kicad/issues/4594
2020-06-01 16:08:46 +02:00
jean-pierre charras e3c3dae776 Fix PCBnew crash when show local ratsnest and selecting a footprint with no pads
Fixes #4506
https://gitlab.com/kicad/code/kicad/issues/4506
2020-06-01 09:09:40 +02:00
Jeff Young 112316cdfb Fixup kiway by hand when dynamic_cast fails.
Also allows a shortened version of Configure Paths without the 3D
paths when Pcbnew isn't already running.

Fixes https://gitlab.com/kicad/code/kicad/issues/4568
2020-05-29 22:06:48 +01:00
Jeff Young 6d5b6c8b81 A bit more refactoring to get code out of the DRC tool. 2020-05-29 22:06:48 +01:00
Jon Evans 5250215d97 Use the calculated bbox for zoomFitSelection
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4120
2020-05-29 16:38:25 -04:00
Jeff Young 39ec63c4e9 Fix some inconsistencies in clearance priorities.
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
Jeff Young 9f2be3714f Add unresolved variable testing for worksheet items. 2020-05-28 17:36:22 +01:00
Jeff Young fe4fd19c66 Fix crash bug in unicode chars with Scintilla. 2020-05-28 00:23:18 +01:00
Jeff Young 8b084c373e Autocomplete for text variables.
Fixes https://gitlab.com/kicad/code/kicad/issues/4190
2020-05-27 23:29:51 +01:00
jean-pierre charras 53360acc3d DIALOG_BOARD_SETUP: fix incorrect parent for the PANEL_TEXT_VARIABLES panel.
Fixes #4548
https://gitlab.com/kicad/code/kicad/issues/4548
2020-05-27 09:24:32 +02:00
jean-pierre charras bf889e91fe PANEL_SETUP_RULES: make rules help translatable.
Only titles are translatable.
Other strings are keywords and remain not translatable.
2020-05-27 08:52:03 +02:00
Jon Evans 39a2416c11 Only sketch pads on fab layers if they exist on that side
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4546
2020-05-26 21:17:39 -04:00
Jon Evans d46c651d80 Only update colors on layer widget when closing preferences
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4545
2020-05-26 21:17:39 -04:00
Jeff Young e61185775f Implement testCopperDrawItem() for POLYGON draw items.
Fixes https://gitlab.com/kicad/code/kicad/issues/4549
2020-05-26 23:48:21 +01:00
Jeff Young d99febba6c Treat sketch mode module items and board items the same. 2020-05-26 23:21:38 +01:00
Jeff Young 6ef6284924 Make sure markers get removed from view when deleted. 2020-05-26 22:09:31 +01:00
Jeff Young 3ea093539b DRC rule syntax help improvements. 2020-05-26 22:09:30 +01:00
jean-pierre charras f971e1267b Fix typo and remove a I18N marker in a sentence containing keywords
(keywords cannot be translated)
Fix also use of a deprecated constant.
2020-05-26 17:47:58 +02:00
Jeff Young f7fbb600d2 Fix compile errors on Linux. 2020-05-26 00:08:27 +01:00
Jeff Young 1f93020be4 Performance improvements for autocomplete and some syntax help. 2020-05-25 22:51:47 +01:00
Jeff Young 1db799d841 Implement "disallow" rules and integrate with keepout settings. 2020-05-25 22:51:47 +01:00
Jeff Young c415130de9 Improve parse error messages. 2020-05-25 22:51:47 +01:00
Jeff Young 90c4249de5 Implement autocompletion for rule s-expr syntax. 2020-05-25 22:51:47 +01:00
Jeff Young 160981ee71 Better error reporting for DRC rule parsing. 2020-05-25 22:51:47 +01:00
Jeff Young 416d82727f Redo DRC rules to get ready for new system. 2020-05-25 22:51:47 +01:00
jean-pierre charras 91b9e928dc minor code cleanup. 2020-05-25 12:06:27 +02:00
Mikołaj Wielgus ecec7192fc Add "Select All" in schematic & layout disambiguation popup menu
ADDED: "Select All" in schematic editor disambiguation menu
ADDED: "Select All" in layout edtor disambiguation menu

Fixes https://gitlab.com/kicad/code/kicad/-/issues/3877
2020-05-24 23:35:04 +00:00
Ian McInerney e18a9d4aa3 Fix mac compile issue introduced in 66929358 2020-05-24 23:53:55 +01:00
Jon Evans 28a4813c71 Force footprint viewers to have a cursor
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4528
2020-05-24 16:10:37 -04:00
Jon Evans a52435bbb0 ADDED: New mouse settings panel, expanded mouse settings
You can now choose the behavior of dragging with the
middle and right mouse buttons.

You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.

You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.

You can also now zoom by dragging with the right or
middle button if desired.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
2020-05-24 14:38:28 -04:00
Jon Evans c7daf8a8f3 ADDED: Cross-probe highlighting of bus members
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
Ian McInerney 29a40ddf9c Readd text sketch mode to the footprint editor toolbars
This was removed during the transition to tool actions,
but the setting still exists, so it can get enabled with
no way to turn it off. Another solution would be to remove
the option for text sketch completely, but I am too lazy
to do that right now.

Fixes https://gitlab.com/kicad/code/kicad/issues/4269
2020-05-24 11:58:33 +01:00
Ian McInerney 4ecf99e7c8 Give the footprint viewer a toolbar and remove the options dialog
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)

This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.

Fixes https://gitlab.com/kicad/code/kicad/issues/2205
2020-05-24 11:58:33 +01:00
Ian McInerney f08057b629 Remove old settings file 2020-05-24 11:58:33 +01:00
Ian McInerney 6692935808 Consolidate common viewer actions across cvpcb and pcbnew frames
* Consolidate the measure tool into one tool (this gives cvpcb
  unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
Jon Evans f7578eb038 Implement new native netlist QA test 2020-05-23 21:04:11 -04:00
Michael Kavanagh ab07c852d0 Board setup: replace checkboxes with radio buttons
Fixes https://gitlab.com/kicad/code/kicad/issues/4520
2020-05-24 00:25:28 +00:00
Jon Evans b4ceddbcd8 Fix the duplicate branches warning 2020-05-23 12:45:28 -04:00
jean-pierre charras 17fad3a9a4 Minor cosmetic fix and enhancement is 2 dialogs. 2020-05-23 09:48:05 +02:00
Stefan 7e6b2211e0 Add Assembly pcbview to pcb_layer_widget 2020-05-22 20:40:53 +00:00
Jeff Young 9a08ee2778 Add a 1nm tolerance to prevent rotated pad roundoff errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/4139
2020-05-22 18:04:29 +01:00
Jeff Young 0a9adaef73 Don't use bboxes for non-cartesian-rotated pad collision testing. 2020-05-22 14:12:56 +01:00
Jeff Young 69f121d907 Another attempt to get DRC and status bar to share message content. 2020-05-22 14:12:56 +01:00
jean-pierre charras f056713ceb Remove old incorrect code. 2020-05-22 08:05:39 +02:00
Jeff Young 4f14769ce1 Use both pads when calculating pad-to-pad clearance. 2020-05-21 21:26:36 +01:00
Jeff Young a5b53a623d Update status bar with clearance & rule sources. 2020-05-21 21:26:30 +01:00
Ian McInerney fca7ade81f Move to the AUI version of the infobar
The sizer-based version had issues with the event processing
inside the GAL panel on Windows systems.

Fixes https://gitlab.com/kicad/code/kicad/issues/4501
2020-05-21 18:22:56 +01:00
Jeff Young 98be50883d Fix bug in single-item layer matching. 2020-05-21 11:25:39 +01:00
Ian McInerney 73a1ce3e84 Move eeschema find notification to the infobar and improve the infobar widget
* Move it to a panel along with the canvas to have a better UI
* Allow the infobar to automatically close after a set time

CHANGED: The eeschema find notifications now use the infobar instead of
a popup window
2020-05-20 02:31:47 +01:00
Ian McInerney 2bc57ade28 Cleanup parentage inside the draw panels 2020-05-20 02:23:46 +01:00
Jeff Young 89c46e6834 Fix typo in DRC check of rule-based track-width. 2020-05-19 21:17:49 +01:00
Jeff Young 7bb280ea39 General cleanup. 2020-05-19 20:48:47 +01:00
Jeff Young 0aaccfbb28 Save hole-to-hole-min to file. 2020-05-19 20:48:47 +01:00
jean-pierre charras 4efed4b729 Pcbnew, exchange footprint and export DSN: fix incorrect rotation if the edit
option Flip was set to flip around Y axis.

Fixes #4487
https://gitlab.com/kicad/code/kicad/issues/4487

Fixes #4478
https://gitlab.com/kicad/code/kicad/issues/4478
2020-05-19 10:20:12 +02:00
Jon Evans f4d7c323f5 Coverity fixes 2020-05-18 22:58:28 -04:00
Ian McInerney a2f027e063 Add an infobar widget to display information above the canvas
This widget allows for non-intrusive display of text
above the editing canvas. Currently, this is used
for displaying the read only status of the files.
2020-05-19 00:46:33 +01:00
Jeff Young 7d537e83ea Match layers only if both items are on the given layer. 2020-05-18 22:37:37 +01:00
Jeff Young ae9662c5cd Fix some unitialized variables.
Fixes https://gitlab.com/kicad/code/kicad/issues/4477

Fixes https://gitlab.com/kicad/code/kicad/issues/4473
2020-05-18 21:30:38 +01:00
Jeff Young d046f165de Fix board outline issues.
1) Don't try and do board-edge clearance checking against a
synthetic polygon constructed because we didn't find any edges.

2) Check pads against board edge.

3) Don't report vias as "Track too close to board edge".
2020-05-18 21:11:01 +01:00
Jeff Young cec857c0f4 Complete hookup of zone filler to new clearance engine. 2020-05-18 19:20:46 +01:00
Jeff Young 05855a5a1c Performance enhancements for DRC. 2020-05-18 13:38:17 +01:00
Jeff Young 8dc6f8e82b Allow empty rules files. 2020-05-17 15:49:02 +01:00
Jeff Young 75b139c7b4 Move hole testing to DRC client and improve performance. 2020-05-17 15:49:02 +01:00
Ian McInerney e662e33104 Store the current filename in the history on close 2020-05-17 00:12:49 +01:00
Ian McInerney 613c020920 Move the file history into the frames 2020-05-17 00:12:49 +01:00
Jeff Young 3656297f99 Add a simple editor for DRC rules. 2020-05-16 23:30:30 +01:00
Jeff Young 5b07889347 Better error messages for rule parsing. 2020-05-16 20:53:49 +01:00
Jon Evans f2e003147e ADDED: Enable color themes for PcbNew printing 2020-05-16 13:19:43 -04:00
Jeff Young d3f017d825 DRC rules parser and engine.
Fixes https://gitlab.com/kicad/code/kicad/issues/2182

Fixes https://gitlab.com/kicad/code/kicad/issues/2116

Fixes https://gitlab.com/kicad/code/kicad/issues/1958

Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
jean-pierre charras 1d914133c9 Pcbnew, context menu: move createArray,moveExact,positionRelative in a submenu 2020-05-16 16:09:00 +02:00
jean-pierre charras c805b52c39 Tool pad enumerate: show it only in footprint editor.
In board editor, its use makes no sense, and crash Pcbnew.
2020-05-16 15:52:47 +02:00
Frank Severinsen 9cf1e61d8a Fix text rotation after flip
fixes https://gitlab.com/kicad/code/kicad/-/issues/4407
2020-05-15 21:17:24 +00:00
jean-pierre charras d5b4473830 PCB_EDIT_FRAME: when calling Eeschema from toolbar, use new .kicad_sch ext.
Fixes #4450
https://gitlab.com/kicad/code/kicad/issues/4450
2020-05-15 10:45:33 +02:00
Jeff Young c7f0f0b844 Fix typos. 2020-05-14 22:31:03 +01:00
Jeff Young 09000313d8 Default dangling DRC checks to warnings. 2020-05-14 22:11:53 +01:00
Jeff Young 13493437d0 Add hole-inside-courtyard DRC checks.
One for NPTH and one for PTH; both default to "ignore".

Fixes https://gitlab.com/kicad/code/kicad/issues/3434
2020-05-14 22:02:47 +01:00
Jeff Young aedc624340 Add DRC checks for dangling vias and tracks.
Fixes https://gitlab.com/kicad/code/kicad/issues/1999
2020-05-14 22:02:47 +01:00
Jeff Young 9db2969911 Set linewidth to Gerber plotter as well a GAL.
Fixes https://gitlab.com/kicad/code/kicad/issues/4428
2020-05-13 17:17:05 +01:00
jean-pierre charras 23927957e1 Pcbnew: fix a crash due to use of invalid pointers after a list modification
Fixes #4409
https://gitlab.com/kicad/code/kicad/issues/4409
2020-05-13 11:51:56 +02:00
jean-pierre charras 2cf82d9129 fix a wxWidgets minor alert and compil warnings 2020-05-13 08:53:32 +02:00
Jeff Young a632e5fbdb Fix same parsing issue in PCBNew.
Fixes https://gitlab.com/kicad/code/kicad/issues/4416
2020-05-12 20:38:58 +01:00
jean-pierre charras c3b50d38dd Pcbnew: Update PCB from schematic: try to load .kicad_sch file instead of .sch file 2020-05-12 10:16:40 +02:00
Jeff Young 74ee143d45 Add via annulus minimum. 2020-05-11 22:56:09 +01:00
Jeff Young 03c47e210c Apply blind/buried via drawing to microvias. 2020-05-11 22:56:09 +01:00
Jeff Young dea05336fc Don't zoom all the way in on a new footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/2220
2020-05-11 00:19:26 +01:00
Thomas Pointhuber 5c7ebb4f2b altium: map Altium KEEP_OUT_LAYER -> KiCad Margin 2020-05-10 20:19:05 +00:00
Thomas Pointhuber 110cefc86f altium: promote wxLogInfo -> wxLogWarning, otherwise it could be ommited 2020-05-10 20:19:05 +00:00
Thomas Pointhuber 31fd3763d2 altium: detect barcode objects, improve binary documentation for text objects 2020-05-10 20:19:05 +00:00
Thomas Pointhuber 5c02c951a9 altium: parse text properties (bold, italic, inverted) 2020-05-10 20:19:05 +00:00
Thomas Pointhuber 96da60d119 altium: use correct text rotation, improve truetype text size
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4349
2020-05-10 20:19:05 +00:00
Thomas Pointhuber 0d3c1a23ad altium: add comment for future readers 2020-05-10 20:19:05 +00:00
Jon Evans a073ae5712 Properly interpret Altium pour index and pad connect style 2020-05-10 13:31:07 -04:00
Thomas Pointhuber 0a38ebcc41 altium: Improve Keepout zone parsing
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4378
2020-05-10 17:30:49 +00:00
Thomas Pointhuber ba409c95b9 altium: Correctly parse advanced pad shapes. Don't rely on magic number to much
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4385
2020-05-10 17:30:49 +00:00
jean-pierre charras bc24d8e957 Fix typo and I18N string 2020-05-10 16:55:15 +02:00
Jon Evans 4165ec3384 Don't set hatch mode for unknown hatch style
Fixes #4383
2020-05-09 17:14:05 -04:00
Jon Evans b5dffa8229 Altium: fix multiline text with Windows line endings 2020-05-09 17:14:05 -04:00
Jeff Young 935cab160b A bit of defensive code for an unreproducible bug.
Fixes https://gitlab.com/kicad/code/kicad/issues/4376
2020-05-09 14:14:38 +01:00
Jeff Young 19dc1f8b69 Make sure text gets drawn after placing even if the mouse isn't moved. 2020-05-09 14:14:38 +01:00