It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
1) Make sure that layer dependencies don't prevent us from drawing
drill marks.
2) Don't draw pad shapes when their particular layer isn't enabled
(a side effect from the above)
3) Allow the printout painter to set a different hole colour (the
special case for through-hole pads was handled twice anyway -- once
in LoadColors() and once in draw( D_PAD ).
4) Replace the call to getDrillSize() which handles swapping in the
small mark size if set.
Fixes https://gitlab.com/kicad/code/kicad/issues/4847
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
Setting a line thickness = 0 for graphic objects (circle, rect, line) is
allowed but creates issues for circles that were plotted a non filled shapes
but having a outline thickness = 0.
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules. They're also now dependent
on the layer being routed as well as the start object.
Also make the controls adjust to each other better. For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
Previously, init order depended on the ordering of the
tool state map, which is opaque from the point of view of
registration. This makes it challenging to make one tool's
init depend on another. With this change, registration
order defines init order.
They're only on screen when they're being used, and we don't have
a GAL available to calculate their actual extents from (since their
text scales with zoom).
Fixes https://gitlab.com/kicad/code/kicad/issues/5845
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
When invoking "Break Track" from the RMB context menu, Pcbnew
gets and uses the current position of the mouse to figure out where to
break the track. The problem is that the mouse has to be moved to select
the "Break Track" menu item, and the mouse position used is wrong. This
can result in the break in the wrong location or not happening at all.
CHANGED: This commit determines if the "Break Track" was invoked from a
context menu or a hotkey. If a hotkey, it uses the current mosue position.
If a context menu, it uses the original postion of the mouse when the menu
was opened.
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
Also simplifies groups so that other areas of code that have to know
about them at least don't have to know as much. One of the simplifications
is to not worry so much about empty groups until save time; others are in
the access logic to parent groups.
Also simplifies user model slightly by removing Merge and Flatten
(which are just ungroup/group and ungroup/ungroup/.../group).
Also allows multiple groups to have the same name. This is useful when
using groups for a classification system.
Fixes https://gitlab.com/kicad/code/kicad/issues/5788
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
The infobar changes the size of the visible screen, so adding/removing
it will shift the screen center, causing the position of onscreen
objects to move up/down. This changes the sizing to pin the bottom
corner position when showing/hiding the infobar
Fixes https://gitlab.com/kicad/code/kicad/issues/5776
ADDED memberOf() function for DRC rule expressions.
Also fixes a bug in several of the pickers where the event wasn't
being correctly passed.
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
ViewGetLOD() returns the minimal value of a zoom to show an item.
However a zoom is a double, and using int as minimal value does not
allows setting a correct value in some cases.
These settings objects could be created in a constructor/destructor
so we should catch the exception since those are noexcept.
Also change the settings trace to match the other kicad traces
as KICAD_SETTINGS
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.
Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.
Fixes https://gitlab.com/kicad/code/kicad/issues/5583
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
This commit adds support for display origin transforms to the PCB_BASE_FRAME
class. This instantiates a PCB_ORIGIN_TRANSFORMS object, and overrides the
GetOriginTransforms method in the EDA_DRAW_FRAME class to reference it.
The formatting of the status line has been updated to display coordinates
relative to the user-selected origin, and with the coordinates increasing
in the user-selected direction.
This commit adds the user configuration options to support display
origin transforms to the PCB_DISPLAY_OPTIONS class. This data is
configured by the "Origins & Axes" preferences panel added in a
later commit.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
wxScrolledCanvas is not properly exported, so when we
add a wxGrid it has a chance of creating linker errors.
Including the wx/grid.h ensures that the linker does not
see two conflicting symbols between gal and the other
place where wxGrid is used.
ADDED: Allow DXF/SVG graphics to be imported as a group
Also, cleanup the placement routine to allow the edit tool's flip
and rotate routines to be used when placing the items.
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
Marek Roszko
Jon Evans
Jeff Young
Wayne Stambaugh
Seth Hillbrand
jean-pierre charras
Ian McInerney
Mikolaj Wielgus
Thomas Pointhuber
Michael Kavanagh
Tomasz Wlostowski
Franck Jullien
PJM
Mario Luzeiro
Roberto Fernandez Bautista
Fabien Corona
Reece R. Pollack