65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
f6dac9eb13
Support text knockouts in non-copper zones.
2022-03-08 18:06:41 +00:00
23088e6e1a
Minor performance enhancements for zone filler.
...
Be smarter about not knocking out some classes of pads twice.
2022-03-05 20:32:08 +00:00
fed5bcbdf6
Improvements for pads/vias in zones which knockout other zones.
...
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
878c4d2f6b
Must clear arcs before calling Clipper.
2022-03-05 18:59:53 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
e6c617b74d
Respect ERROR_OUTSIDE when inflating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-21 15:19:46 +00:00
81bed9ab96
Add zone margin when subtracting other graphics and zones.
...
It was already added for pads and tracks, but not the other objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-18 13:20:36 +00:00
b1bd8421e0
Performance: remove associated triangle sets when removing outline.
...
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
327ddad79f
Performance: get rid of rawPolys / finalPolys distinction.
...
(The final fractured polys are required, and we don't really ever use
the raw polys anyway, so they were removed.)
2022-02-16 15:33:12 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
d8c4f2cb09
Performance improvements for zone filler.
2022-02-15 19:19:02 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
aef665b1e2
PCB_TARGET: add missing TransformShapeWithClearanceToPolygon() method.
...
Fixes #10653
https://gitlab.com/kicad/code/kicad/issues/10653
2022-01-29 18:19:22 +01:00
4eac8d7c66
Remove unit-less angles from geometry lib APIs.
2022-01-20 21:10:04 +00:00
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
ac78d51b14
Teardrops: better dialog, and better code
2022-01-10 20:04:41 +01:00
53770fec68
Ensure thermal spoke widths are smaller than the pad size (fix a regression)
...
This is needed to create good thermal reliefs, and ensure the DRC about
thermal spoke count works.
Fixes #10246
https://gitlab.com/kicad/code/kicad/issues/10246
2022-01-07 16:38:27 +01:00
7fa451dc93
Thermal reliefs: fix incorrect calculation
...
commit eeef655
2022-01-06 09:00:29 +01:00
eeef65533a
Pad Thermal Reliefs: fix spoke incorrect angle for rotated pads.
...
Fixes #10251
https://gitlab.com/kicad/code/kicad/issues/10251
2022-01-05 11:19:43 +01:00
ea613cf448
Another batch of point changes
2022-01-01 13:17:12 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
3aa6d73770
Allow min/max/opt to come from different rules.
2021-12-24 12:36:37 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
77239591c0
Don't commit zone refill if there were no changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10085
2021-12-23 16:54:03 +00:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
341b0a5652
Don't depend on a keepout zone having no priority.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7776
2021-10-26 17:20:09 +01:00
b1f17dc927
Don't let the polygon routines collapse on a zero line width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9418
2021-10-20 12:29:07 +01:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
eb85836234
Make sure we have footprint courtyards before depending on DRC rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8291
2021-04-25 12:45:06 +01:00
fe6cc0c3d8
Spokes are from center of pad, not from hole (ie: pad position).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8195
2021-04-14 11:34:26 +01:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
e26c912b86
Don't apply electrical clearance to non-copper zones.
...
Also removes a very old (and somewhat confusing) comment.
Fixes https://gitlab.com/kicad/code/kicad/issues/7404
2021-02-03 11:56:43 +00:00
8778599c0d
Apply same nettie hack to zone filler
...
The nettie hack is used in DRC but we also need to use it in zone filler
to allow zones to be used with netties. We limit this to the
appropriate nets in the nettie
Fixes https://gitlab.com/kicad/code/kicad/issues/7351
2021-01-31 16:16:48 -08:00
Jeff Young
jean-pierre charras
Marek Roszko
Seth Hillbrand
Roberto Fernandez Bautista
luz paz
luz paz