Adjust the sizer proportions slightly to eliminate the reported bug.
This may not be the ideal way to do this and there could be some issues
on other platforms but it does resolve the issue on gtk3.
Fixes lp:1820084
https://bugs.launchpad.net/kicad/+bug/1820084
Apparently at some point in KiCad's development, a '~' character was
prefixed to the symbol name to indicate that it was not visible. The
visibility state is now saved in the name field so remove the prefix.
The parser was kept unchanged.
Fixes lp:1632048
https://bugs.launchpad.net/kicad/+bug/1632048
Redesignate the eagle test as eeschema tests and build
more like the other unit tests.
Enable as a test in Ctest now that the test executes without
crashing.
The loading of the file with the hardocded part is still
not enabled, as this needs more infrastructure to support it.
Statically constructing wxCursors as used for the probe
and tune cursors crashes the qa_eagle_plugin test
instantly.
Fix this by introducing a new class CURSOR_STORE,
which allows to abstract the platform wierdness of wxCursors
and allow the simulator to laziliy init its own cursors
at runtime.
This code isn't properly tested, as these cursors are never
actually used. However, it does allow the eeschema unit test
to run.
Fixes: lp:1781191
* https://bugs.launchpad.net/kicad/+bug/1781191
Save/restore default netclass.
Read layers back in with correct syntax ('.' between keyword and layer name).
Write layers to project file.
Read/write layer enablement bits.
Don't set solder paste margin min to 0 (most of them are negative).
Fixes: lp:1811990
* https://bugs.launchpad.net/kicad/+bug/1811990
Remove unnecessary calls to TestDanglingEnds()
Disable real-time connectivity updates for now
Revert "Remove unnecessary calls to TestDanglingEnds()"
This reverts commit d93e3894f2bcd6239862ac9eae0cb2f994b9d52a.
Remove debug code
Don't prepend "/" for nets at the top level
Revert "Don't prepend "/" for nets at the top level"
This reverts commit fa9533222f7d33eee5f3fa2320bd9f3167e28076.
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
Make a few things const (specficially the reference into
m_fieldStore - we should commit to not modifying that in this
function.
Also avoid a couple of needless string copies.
Also explicitly dereference the into a (non-const) reference at the outset.
For the whole if this function, comp is the same object and may not
be null (as it is used unchecked).
Make the "Define as power symbol" checkbox tooltip more descriptive so
the user has a better understanding of enabling this option.
Fixes lp:1804932
https://bugs.launchpad.net/kicad/+bug/1804932
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
Call base object TransferDataFromWindow() to prevent Validate() from
being called twice. Validation is handled completely under the hood
so there is no need to call Validate() directly.
Fixes lp:1820301
https://bugs.launchpad.net/kicad/+bug/1820301
We add LIB_ALIAS to the VIEW rtree when choosing a new symbol or
browsing. The actual display element may change based on the unit or
demorgan representation but there will only ever be a single one drawn.
This will set the view bbox to maximum to ensure it is always checked
for drawing.
Related to lp:1796960
https://bugs.launchpad.net/kicad/+bug/1796960
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
The folder button handler works will for footprint libraries but we
needed a specific class for the schematic libraries as well.
Fixes: lp:1818346
* https://bugs.launchpad.net/kicad/+bug/1818346
The pin on grid test always used a fixed grid spacing of 25 mils. The
change uses the current grid setting for the on grid test. Grid sizes
below 25 mils are clamped to 25 mils to prevent issues when connecting
wires to pins in the schematic editor.
Fixes lp:1817896
https://bugs.launchpad.net/kicad/+bug/1817896
For unknown reasons, GTK3 may send resize events when editing grid
fields. This can cause the grid editor to exit, losing the focus and
overwritting the characters at the next input.
We avoid this by filtering the size events when the size doesn't change.
Fixes: lp:1817810
* https://bugs.launchpad.net/kicad/+bug/1817810
For some reason, changing languages was causing the options (left) toolbar
to get redrawn with some of the main toolbar entries. Changing the window
size causes the toolbar to be redrawn correctly. The normal call to
function wxWindow::Refresh() does not.
Fixes lp:1816492
https://bugs.launchpad.net/kicad/+bug/1816492
In Symbol editor, axis are always shown. However after switching the backend, axis were no longer drawn.
In Cairo engine, fix a bug preventing axis to be shown.
While modifying elements in eeschema/libedit, they are overdrawn on the
rest of the schematic. This prevents alignment with existing elements
as the underlying elements are not visible. We set a slight
transparency on elements while being modified to allow the user to view
existing elements at the same time.
Fixes: lp:1817233
* https://bugs.launchpad.net/kicad/+bug/1817233
Introduce a shortcut method to set tab ordering and use it in
the dialogs that override the tab traversal orders:
* Eeschema sheet properties
* Pcbnew Move exact
* Pcbnew Move relative
Also set some initial focus fields in the same dialogs.
Tidy a few includes.
Fixes: lp:1816009
* https://bugs.launchpad.net/kicad/+bug/1816009
Move the class DIALOG_EDIT_COMPONENT_IN_SCHEMATIC to its own
header, and move the SCH_EDIT_FRAME::EditComponent out of the
dialog implementation file. Thus, users of the dialog are
coupled only by the dialog header, as usual.
Also tidy some includes and comments.
In DIALOG_EDIT_COMPONENT_IN_SCHEMATIC, the Cancel button is
connected to a dedicated handler to deal with the footprint
browser widget. DIALOG_EDIT_COMPONENT_IN_LIBRARY should have
the same logic.
Fixes: lp:1816636
* https://bugs.launchpad.net/kicad/+bug/1816636
Click to add/edit footprint filters under MSW requires handling the
listbox double click first before the item is handled.
Fixes: lp:1816182
* https://bugs.launchpad.net/kicad/+bug/1816182
This (aside from getting both parts into a single undo stack item)
will ensure that we clean up both parts on an abort.
Fixes: lp:1816284
* https://bugs.launchpad.net/kicad/+bug/1816284
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
Clearing the cache removes all items from screen until the cache is
refreshed. Instead, we wanted to re-cache the items to take into
account the bitmap changes.
Fixes: lp:1815443
* https://bugs.launchpad.net/kicad/+bug/1815443
This places the Delete markers/Run/Close buttons at the bottom of the
form rather that inside the panel. Allows the user to access the
functions even when on a different panel.
Fixes: lp:1815102
* https://bugs.launchpad.net/kicad/+bug/1815102
When loading a part in libedit, also transfer certain screen
settings to the incoming SCH_SCREEN, from the current
SCH_SCREEN.
Currently, the grid settings are transferred, but this could
also do other settings if needed.
Also remove some duplicate commentary and mention why the
grid is set in a SCH_SCREEN even though the BASE_SCREEN ctor
sets the same default.
Fixes: lp:1815108
* https://bugs.launchpad.net/kicad/+bug/1815108
Do not keep pointer to SCH_EDIT_FRAME in the rescuer object to prevent
it from creating dialogs with itself as the parent when call from the
rescue dialog which is itself a grandchild of the frame window.
* Make LIB_TABLE_BASE::GetCount() return unsigned. This is more
consistent with the behaviour of STL containers (especially the
boost::ptr_vector this is really accessing). Sadly
wxGridTableBase() forces an int, so a cast is still required
at the WX interface.
* Make LIB_TABLE_BASE::At() return a reference. First, this is more
consistent with normal STL indexing operator[]'s, and secondly, it
allows an idiomatic const index method (so you can access const
LIB_TABLE_ROWs from a const LIB_TABLE_BASE).
The motivation is to allow use of this class and LIB_TABLE_ROW
in a test program, where the LIB_TABLE_BASE is const.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
Using the quantity column for the collapse/expand controls feels too odd
when you expand and everything under the parent is a '1'.
Fixes: lp:1780847
* https://bugs.launchpad.net/kicad/+bug/1780847
When creating new lib table rows, the pointer becomes managed by the new
table through the boost::ptr_vector. The row is non-copyable, however,
so we lose the reference as soon as it goes out of scope. Creating a
clone provides a new pointer that is moved into the table on creation.
Fixes: lp:1792456
* https://bugs.launchpad.net/kicad/+bug/1792456
Assignment of columns was offset based on the quantity column. This
cleans the implementation as well as setting the correct width
Fixes: lp:1814380
* https://bugs.launchpad.net/kicad/+bug/1814380
Eagle can label nets independently of the connection point position. In
an "interestingly" designed circuit, this can lead to a junction of a
pin, wire endpoint and unrelated wire. While this is bad practice,
KiCad shouldn't force an incorrect net connection during the import. In
this case, we skip the addition of junctions to ensure that we don't
create a schematic error.
Fixes: lp:1788019
* https://bugs.launchpad.net/kicad/+bug/1788019
Uses existing grouping in SVG output. Sets schematic components as a
grouped element in SVG as well as pcbnew elements per layer.
Fixes: lp:1011754
* https://bugs.launchpad.net/kicad/+bug/1011754
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
Symbol fields uses a custom expander control. This should be tied to a
column that cannot be hidden in order to ensure the ability to view sub
elements remains intact, like the standard control.
Fixes: lp:1780847
* https://bugs.launchpad.net/kicad/+bug/1780847
When no default library tables are found, set the default wxFilePickerCtrl
to the users configuration path instead of the current project path to
prevent any project library tables from being used as the default.
Fixes lp:1809769
https://bugs.launchpad.net/kicad/+bug/1809769
Spacing text for plotters uses the thickness of text for two separate
classes. This sets the thickness in the EDA_TEXT class as well to allow
the multiple line positions to be correctly set
Fixes: lp:1799605
* https://bugs.launchpad.net/kicad/+bug/1799605
When starting Eeschema, or a frame/dialog using a SCH_DRAW_PANEL, the bg color was initialized too late,
thus creating a flicker or an annoying draw artifact (in SYMBOL_PREVIEW_WIDGET for instance) if a Paint event
is fired before the right bg color is initialized.
Initializing the bg color earlier fix this issue.
Fixes: lp:1797203
https://bugs.launchpad.net/kicad/+bug/1797203
Factor out common dialog code from global symbol library table dialog for
loading initial library table.
Update global symbol library table code to user factored out common dialog
code.
CHANGED: First click sets a cursor to the specified cell, second click
activates editor (current realization, where first click activates cell
editor, is very buggy especially with cells selection).
Set cursor on cell of reference on mouse left click in Fields editor of
Eeschema.
On clicking a reference cell in the field editor of Eeschema a
corresponding component is highlighted in Eeschema. But previously
highlighted components are staying highlighted.
With current patch all highlightings are cleared before highlighting
selected component.
Prevent obvious scale issues (0.0, nan, etc) from corrupting display of
schematic images. In these cases, we reset the scale value to 1.0 and
allow the user to input the appropriate value when editing the
schematic.
Fixes: lp:1811066
* https://bugs.launchpad.net/kicad/+bug/1811066
The canvas type might change without the frame being notified. If this
happens, the user is presented with repeated notifications of OpenGL
issues. Howver, switching canvas is not an error and should be
presented to the user as an info message to clarify that the system is
still working but it has changed how it renders the screen.
Fixes: lp:1795240
* https://bugs.launchpad.net/kicad/+bug/1795240
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
The default filename textbox confusingly could not be edited and the
checkbox for "Use default filename" would also use a default location.
As the netlist export is no longer required in the workflow, we can
simplify the layout to always show the user the file save dialog
allowing them to choose the location and name of the exported netlist
file.
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
wxWidgets provides a system-dependent string for "*" or "*.*" depending
on the system. Unfortunately, wxFormBuilder does not use this and
instead defaults to the Windows-only "*.*". This is an ugly work
around.
Fixes: lp:1810221
* https://bugs.launchpad.net/kicad/+bug/1810221
The hotkey name "Help (this window)" does not describe what the hotkey
and associated action does. It displays the current hotkey list, so the
action name should reflect that behavior
Fix highlight not cleared by Pcbnew.
Fix highlight not cleared by Cvpcb (missing code).
Add comments. Remove a few now useless printf used for debug
When clicking on a empty area, clear any highligthed symbols
Fixes: lp:1809977
https://bugs.launchpad.net/kicad/+bug/1809977
While name and path fields would make more sense, this commit
encodes the nickname as an "opts" field so that older versions will
still read the preferences file.
When closing a project, the screen is released, so we need to avoid
cross-probe calls dereferencing the screen pointer.
Fixes: lp:1807501
* https://bugs.launchpad.net/kicad/+bug/1807501
Schematic symbol library link names are unquoted strings that can
contain non-ascii characters which breaks the parser. Converting
the line to uft-8 before breaking the string into tokens resolves
the issue.
Pin names are unquoted strings that can contain non-ascii characters
which breaks the parser. Converting the line to uft-8 before breaking
the string into tokens resolves the issue.
Clear the annotation of only the appended schematic and any sheets in it's
hierarchy. Do not clear the annotation of the symbols in the target sheet.
Fixes lp:1805695
https://bugs.launchpad.net/kicad/+bug/1805695
Iterating over unquoted strings as ASCII8 fails when ' ' character is
not the LSB of a UTF8 string with wide characters. Change parsing method
for unquoted strings to convert the entire line as UTF8 and then use
wxStringTokenizer to break the line into tokens at the ' ' characters.
Fixes lp:1806206
https://bugs.launchpad.net/kicad/+bug/1806206
This makes using Scrollbars more easy to use, especially for "small" page sizes like A or B.
Note also the working/drawing area size is bigger than the page size (3 times)
* On Windows, a python command line must be python <script_path>/script.py
and not python <script_path>\script.py
* Fix also a incorrect warning message when a script is not found.
This parameter defines the working area (full page) size.
The fix is not perfect, because it does not take in account the page size.
However it is similar to the "old" initialization, before Eeschema GAL.
In Eeschema, a reasonable boundary size is used.
Pin Table dialog replaces LIB_ITEMs, while one of them may still
be pointed to as the current library item. Certain wxUpdateUIEvent
will try to dereference the pointer, leading to a crash.
In particular, don't move block back to start when duplicating,
and don't move crosshair back to start when doing a cut, copy, or
paste.
Also fixes undo for libEdit block duplicate.
Fixes: lp:1740138
* https://bugs.launchpad.net/kicad/+bug/1740138
Factor out save current canvas view to image file code from symbol editor
code so it can be used anywhere.
Add ability to save to any image format supported by wxBitmapType. See
https://docs.wxwidgets.org/3.0/gdicmn_8h.html#a90a1eb6d85b5044a99b706fd979f27f5.
Currently only PNG output is implemented.
Please note that there is a minor bug that appears to be due to the
scroll bars which causes unfilled areas on the right and bottom edges
of the image. This always existed in the save symbol editor view
image but it was not as noticeable because by default the background
color is white. It is very noticeable in the footprint editor with
a black background.
The usual smattering of coding policy and comment fixes.
Fixes lp:1802127
https://bugs.launchpad.net/kicad/+bug/1802127
This avoids having to manually specify include/legacy_gal
in and legacy GAL targets, and harominizes with legacy_wx.
This also means .cpp files in common/legacy_gal do not
need to specify the legacy_gal subdirectory, so they
will continue to work as needed when legacy_wx is removed.
SCH_COMPONENTs should be added to VIEW only when symbol links are
resolved. Otherwise a dummy component bounding box will be used when
inserting a component to VIEW R-tree.
Fixes: lp:1801800
* https://bugs.launchpad.net/kicad/+bug/1801800
The crash happens when a wxPaint event is fired after deleting the schematic frame.
It happened only on one Linux install.
Fixes: lp:1800874
* https://bugs.launchpad.net/kicad/+bug/1800874
Text doesn't have "special" handling of dragging, like connected items (it's
basically just a move). However, allowing "drag" to work on text makes
handling text consistent when dragging other items.
The dialog was using a LIB_ALIAS from library cache to show the symbol to the canvas without making a local copy.
Unfortunately, the library viewer is doing the same thing.
Now the GAL is used in Eeschema, a link to the VIEW used by the GAL canvas is stored in this class.
When The selector symbol dialog is used to choose a symbol to display in the Library viewer,
a race condition between the Library viewer GAL canvas and the dtor dialog that destroyed this link in the same instancied class.
Now, the SYMBOL_PREVIEW_WIDGET used in the dialog works on a local copy of the symbol to display.
Adds a link-time dependency for libngspice, so that other tools may
detect ngspice as a KiCad dependency.
The library is still loaded with dlopen() as it gives a way to reload it
in case of problems. The DLL name is recognized during CMake
configuration and used to load the library at runtime.
CanonicalizeName only adds the lib prefix and .so suffix, so loading
libngspice.so fails until the development package is installed.
MAC/Windows code paths lookup soversion 0 of ngspice as well, as this
is the only compatible version.
No dangling symbol for text items with a NO-CONNECT.
DanglingStateChanged doesn't work with dangling flag aggregators
(which return true if any child is dangling).
Then again, we don't actually use any of the aggregators anyway
so I removed them.
Fixes: lp:1799589
* https://bugs.launchpad.net/kicad/+bug/1799589
When importing an existing schematic into a sheet that was no remapped
to use the symbol library table, the user was given the option to ignore
the warning and proceed with the import. This would end up with all of
the imported symbol links being broke. In hindsight, this was a bad
idea so now the user cannot import schematics that have been remapped.
Fixes lp:1791280
https://bugs.launchpad.net/kicad/+bug/1791280
Seems rather expensive, but this is what the Legacy canvas did.
In fairness, it does check the last-mod-date of the libraries
and skips it if they haven't changed.
Fixes: lp:1798446
* https://bugs.launchpad.net/kicad/+bug/1798446
Prior to placing, cleaning routines need to know which schematic items
are being moved to avoid cleaning them relative to themselves. The
IS_MOVED flag communicates this and is cleared by ClearDrawingState()
Fixes: lp:1797576
* https://bugs.launchpad.net/kicad/+bug/1797576
Dynamic casts should only be used when we explicitly check for the
resulting pointer to be NULL. Where we know the class is castable we
can use static_cast, save on overhead and ensure our resulting pointer
is non-null.
Center point of a block may not always be located on a grid point,
therefore it needs to be rounded to the grid size to prevent off grid
component placement.
The old code delayed duplicating till the end which means the
rotate/mirror would affect the original, and then be duplicated
leaving the original incorrectly rotated/mirrored.
Block rotate and mirror now work like they do in Pcbnew (that is
they're treated as part of the block move/duplicate/whatever
rather than finishing it).
Fixes: lp:1780794
* https://bugs.launchpad.net/kicad/+bug/1780794
1) when duplicating don’t keep original hidden until end of drag
2) reset selectionArea when showing it so it doesn’t flash in its previous location
3) center a pasted block on the cursor
4) don’t draw the source selectionArea when pasting a block
5) implement selection-style highlighting for contents of blocks
6) add pasted items to view so they don’t disappear when the block is placed
Fixes: lp:1747197
* https://bugs.launchpad.net/kicad/+bug/1747197
Split antialiasing options out from display options. Move
antialiasing to common. Duplicate the rest of display options
for Eeschema.
Implement OnSelectGrid and hookup GAL canvas refresh to
SetPresetGrid.
Add Grid Settings... to View menu and move Show Grid from
preferences to View Menu to match Pcbnew.
5.0 doesn't set the GAL's line width. It gets away with this since
it's using the same GAL to measure as to set up the drawing, so
the width happens to be set correctly for other reasons. 5.1 uses
a separate GAL and so isn't so lucky.
Support all symbol orientations. (Yes, SCH_COMPONENT said only the
first 8 were used, but it lied.)
Fix cases where SetTextAttributes() was overwriting previously-
set justifications.
Correct rotation of vertical text.
Fix issue where bold global label would affect thickness of next
label's outline.
Eeschema (where only the parent component is in the view) uses
draw order.
LibEdit (where the individual items are in the view) uses the
viewPriority setting.
The '/' and ':' are reserved and cannot be used in symbol or footprint
names. They will cause the LIB_ID parser and formatter to fail. While
it seems like they should be legal in symbol alias names, they will
trigger a symbol rescue the next time the schematic is loaded.
Use ID_SCH as in the Eagle schematic plugin rather than ID_ALIAS to
ensure symbol names do not need rescued the next time the schematic is
opened.
Remove ID_ALIAS since the rules for alias names are the same as the
rules for symbol names. Otherwise, allowing '/' and ':' in alias names
will force a symbol rescue on the next schematic load.
Fixes lp:1795600
https://bugs.launchpad.net/kicad/+bug/1795600
Adds Cut/Copy/Paste and Revert for footprints; introduces a new
shared Revert Changes? dialog; hooks up Add Library for footprints,
standardizes the Save As terminology.
Somewhere during v5 rc cycle, the trimming of wires laid over simple
components was removed. The wires were still removed as soon as the
user moved the component again. This corrects the first behavior to
intended action for simple components.
Fixes: lp:1794019
* https://bugs.launchpad.net/kicad/+bug/1794019
(cherry picked from commit 9831a14ef3)
Reset lock file when saving a schematic sheet to a different file name.
This prevents a file is already open error from being displayed when
opening the original file.
Fixes lp:1788507
https://bugs.launchpad.net/kicad/+bug/1788507
Under certain conditions, it was possible for the block handler to be
entered with no mouse capture callback which would raise a rather
cryptic error message to the user. This should have always been an
assertion so users will not see this issue in release builds.
Fixes lp:1791839
https://bugs.launchpad.net/kicad/+bug/1791839
The symbol library table rescue candidate was only using the item name
of the library ID object which was being compared to the fully formatted
library ID causing a comparison failure so no instances of any rescued
symbols was shown in the dialog.
Fixes lp:1791805
https://bugs.launchpad.net/kicad/+bug/1791805
Even though slash is a valid character in symbol names, it is a revision
separator, but is not the case with Eagle symbol names.
Fixes: lp:1791653
* https://bugs.launchpad.net/kicad/+bug/1791653
Spice may include a list of directives that are wrapped with
.control and .endc. Such directives do not have a dot prefix, so
they need to be handled in a special way.
Fixes: lp:1787902
* https://bugs.launchpad.net/kicad/+bug/1787902
When expanding the drag item to allow corners, we accidentally picked up
other items in the list. This limits the items that can be dragged to
only those that are explicitly in the draggable list.
A side effect of this commit is that when converting from move to drag
(with tab), items not in the draggable list will be left in place.
Fixes: lp:1787966
* https://bugs.launchpad.net/kicad/+bug/1787966
Previously, when creating a new instance of a sheet, the full set of references
was cleared.
Moreover, if this sheet has sub-sheets, the annotation was incorrectly handled
Now only (and all) new sheet path(s) created have a reference cleared, as expected.
(new sheet paths can be more than one, if the new instance of the sheet has sub-sheets)
Fixes: lp:1789048
https://bugs.launchpad.net/kicad/+bug/1789048
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).
Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
We have a dialog shim that raises the ERC dialog in front of the
schematic frame, which is useful for keeping the ERC dialog visible
during debugging. But mouse move events do not pass through to the
schematic, resulting in a captured mouse pointer but no drawing updates.
As a work-around we close the ERC dialog while placing new components.
Previous ERC data still exist when the window is launched again.
Fixes: lp:1779851
* https://bugs.launchpad.net/kicad/+bug/1779851
It was only a overzealous (in this case) assert, with no issue.
The fix avoid calling DeleteAll() when there is nothing to delete.
Fixes: lp:1787810
https://bugs.launchpad.net/kicad/+bug/1787810
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Eagle files that are edited may be missing required data. While we do
not need to handle these files, we do need to prevent segfaults in KiCad
when reading them.
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
The parser also now skip empty lines.
This bug created unreadable saved .dcm files and .sch files after adding a new symbol.
Fixes: lp:1786141
https://bugs.launchpad.net/kicad/+bug/1786141
The issue is in:
wxPoint( parseInt( aReader, line, &line ), parseInt( aReader, line, &line ) )
that calls parseInt() twice, but parseInt changes parameters at each call.
(Does not return the same value at each call).
However, due to some side effect or compil optimization, the value returned is incorrect.
It can be dependent of the compiler, and optimization level.
This kind of code must be avoided.
Spooling up a full PLAYER in the background takes too long.
This also fixes bugs around how the tables are saved, although
that was just missing code rather than anything architectural.
Fixes: lp:1785436
* https://bugs.launchpad.net/kicad/+bug/1785436
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
Use standard button layout and remove extraneous heading.
Move to TransferDataTo/FromWindow.
Close dialog after printing.
Fixes: lp:1763319
* https://bugs.launchpad.net/kicad/+bug/1763319
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
Take field name sizes and user preference line thickness into account
when calculating placement of the text fields of a hierarchical sheet on
the canvas.
The previous calculations contained some magic numbers which seem to
have been well suited to cases where line width is 8 and text size is
0.050. However, the text collided with the sheet outline as soon as text
size or line width was increased.
This commit has been evaluated with line widths ranging from 5 to 100
and text sizes ranging from 0.02 to 0.200. Also in combination with
characters such as qyg and ÅÄÖÜ in the file/sheet names.
(cherry picked from commit b1a60b2)
When drawing a hierarchical sheet symbol, the text line width for
"Sheet: ..." and "File: ..." are now clamped (limited).
Clamp_Text_PenSize() is used for the calculation.
Before, without the clamping, these text widths grew with the line width
preferences option. That resulted in characters cluttering up.
(cherry picked from commit b76407e)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
Also makes better use of space to significantly increase number
of markers shown.
Fixes: lp:1748676
* https://bugs.launchpad.net/kicad/+bug/1748676
(cherry picked from commit a1d8097)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Three instances of variables named "reference" shadow a typedef
within std::vector producing:
warning: declaration of ‘reference’ shadows a previous local [-Wshadow]
note: shadowed declaration is here
typedef typename _Alloc_traits::reference reference;
This patch works around by renaming "reference" to "schReference".
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
For the path separator in full filename, the sheet filename from the dialog uses the Unix notation,
and the "old" sheet filename uses the default notation (it is the actual filename).
Therefore, on Windows, after closing the dialog, the filename was always seen as modified,
and the hierarchy was incorrectly modified (annotation cleared).
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
Also sets the initial footprint to the current footprint when
doing a Choose Footprint from the Eeschema Edit Property
dialog.
Fixes: lp:1776126
* https://bugs.launchpad.net/kicad/+bug/1776126
Any errors in the dialog should be handled and, at worst, allowed to
redo. SPICE_VALUE throws KI_PARAM_ERROR, so we catch that explicitly.
Fixes: lp:1776051
* https://bugs.launchpad.net/kicad/+bug/1776051
This refactors the symbol field editor's checkbox state-saving code to
deal with multiple projects with disjoint field sets more consistently.
For instance, imagine I have a two projects
* Proj1 has fields A, B, C
* Proj2 has fields A, B, D
Under the old scheme, when I switch from one project to the other the
state of fields C and D will be forgotten. With the new approach,
however, they are retained.
Not to mention, the implementation is considerably simpler. Fixes
This makes it significantly easier to find a particular component when
using the field editor, as I often do for part selection.
Fixes: lp:1772169
* https://bugs.launchpad.net/kicad/+bug/1772169
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
When you search for an item that exists on a separate sheet in the
schematic, the newly loaded schematic sheet needs to have the dangling
flags set so that we don't have a mess of non-connected "o" markers.
Clearing annotations should only clear the settings that can be set by
the matching annotate function. Even in components where the units are
functionally the same, the unit choice should be retained as there are
often other considerations when chosing the unit.
Fixes: lp:1769457
* https://bugs.launchpad.net/kicad/+bug/1769457
The splitter window can not be the parent to any additional windows.
If it acquires a child that persists past the lifetime of the splitter
window, we get a segfault.
Also hooks up the Python netlist reader to the descriptions so
that they appear correctly in BOMs. (The BOM generators used
to always get the root component's description rather than the
alias's description.)
Fixes: lp:1774358
* https://bugs.launchpad.net/kicad/+bug/1774358
std::invalid_argument does not work fine with translated strings as argument for message.
(the translated message is incorrectly or not displayed if it contains non ascii8 chars, at least on Windows).
KI_PARAM_ERROR can be throw-ed with a translatable/translated string (a wxString)
Empty project path is a valid case when eeschema is executed in
standalone mode without any file loaded.
There were no observed harmful consequences of running eeschema without
the project path set, but to stay safe the project specific
sym-lib-table load code is executed only when the project path is set.
In the scenario described in the bug report, the SCH_SCREEN current item
pointer stores an address of a stale object that had been deleted when
the symbol was reloaded. To prevent the crash, the current item pointer
is reset whenever a symbol is loaded.
Fixes: lp:1774296
* https://bugs.launchpad.net/kicad/+bug/1774296
Button "Toggle the search tree" from left toolbar of Symbol Library
Editor does not show actual state of visibility of the search tree
panel. State of this button (checked or unchecked) changes on clicking
only. Toggling panel visibility from menu does not make effect on tool
state.
Applied changes makes tool state (checkd/unchecked) synced with panel
state (shown/hidden).
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
1) Commit in-progress edits before closing preferences.
2) Handle default fields in Symbol Fields Editor.
3) Save state of checkboxes in Symbol Fields Editor.
The original algorithm picked the value from the last component having
non empty value for a given field, but the processing order was
dependent on the layout of the components in the memory. It means that
for each component, the field values could have been taken from any
unit, randomly.
The patch improves the algorithm, trying to get all values from the unit
with the lowest number and resorts to other units only when there are
field values left empty.
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
It was always replaced with space in a graphic text, but it should happens
only in non quoted texts
Now graphic texts containing ' ' or '~' or '"' are always quoted
(work fine with 4.0 version)
Fixes: lp:1771105
https://bugs.launchpad.net/kicad/+bug/1771105
Also fixes a bug where unannotated components would get references
of the form R-1 (because their reference number was -1).
Fixes: lp:1768814
* https://bugs.launchpad.net/kicad/+bug/1768814
Path keeping stack copes well with paths pointing outside the project
directory (e.g. "../path"). The so far used wxFileName::GetDirCount() and
wxFileName::RemoveLastDir() remove too many directories, as ".." is also
counted as a directory.
Fixes: lp:1769746
* https://bugs.launchpad.net/kicad/+bug/1769746
It happens only with option "Reset, but keep order of multi-unit parts, because the algo tried
to propagate the new reference to parts having the same old reference,
without testing if this old reference was duplicated.
Fixes: lp:1769250
https://bugs.launchpad.net/kicad/+bug/1769250
Both "Leave Sheet" and "Library Browser" menu entries were mapped to the
'L' key. Mapped the "Library Browser" entry to the 'B' key.
Fix "Show hidden pins" menu entry capitalization.
Map "Show Hidden Pins" to 'P' key and "Full Window Crosshair" to 'W' key.
Fixes lp:1768671
https://bugs.launchpad.net/kicad/+bug/1768671
This patch prevents fields with long text values from unreasonable
dialog resizing. It is basically commit f4eb63f8 applied to a
corresponding field editor dialog in the Symbol Editor.
Values generated by NETLIST_EXPORTER_PSPICE::GetSpiceFieldDefVal()
and the actual value that was stored in a netlist differed when a
component has multiple units.
Due to that, the Spice model editor dialog incorrectly recognized
"alternate node sequence" value as the default one and cleared it
when the dialog was closed.
Also changes Save Library and Save Library As to work off the
visible selection if there is one.
Also implements enablement for Save All Libraries.
Fixes: lp:1764081
* https://bugs.launchpad.net/kicad/+bug/1764081
This is particularly important when bulk adding (by director, etc.)
as otherwise the user might end up having to click OK to many
many error dialogs.
Fixes: lp:1764057
* https://bugs.launchpad.net/kicad/+bug/1764057
Code fixing Spice device names (prefixing reference with a character
corresponding to the assigned device model type) that was duplicated in
a few places has been moved to a function (NETLIST_EXPORTER_PSPICE::GetSpiceDevice()).
With uninitialized COMPONENT_TREE::m_menuActive there were cases when
application logic erroneously decided to fetch the current library name
from the right click menu selection, even though there was no menu
opened, so an empty string was returned. Empty library name is
equivalent to no library loaded, therefore the save button appeared
disabled.
Fixes: lp:1765937
* https://bugs.launchpad.net/kicad/+bug/1765937
When a relative sheet path was not in the project path or a subfolder
within the project path, the schematic path would be empty. Set the
base path to the project path when the schematic path is no within
the project path hierarchy.
When LIB_ALIAS is renamed, it validates the new name. In case the name
typed in the field edit dialog is invalid, there was a discrepancy
between the name used further in the code and the actual alias name.
Fixes: lp:1765375
* https://bugs.launchpad.net/kicad/+bug/1765375
The main purpose of the patch is to load libngspice from macOS bundle.
There are also some additional paths that could make Windows developers
easier.
Fixes: lp:1630675
* https://bugs.launchpad.net/kicad/+bug/1630675
The messages on sheet duplication are changed to reflect the action
perceived by the user when accepting/rejecting the change.
Annotation is also reset for duplicating sheets where maintaining
existing annotation would conflict with existing sheets.
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
Because the cache is broken, the rescue library was never created after missing library or change in lib.
This was due to the fact the symbol name inside the cache is broken, since commit a5844c9,
because all illegal chars in symbol name are replaced by '_'.
Unfortunately, in library cache, the ':' (illegal in usual libraries) is used to build the cached symbol name.
so in lib cache, symbol names were broken, making this lib useless.
this fix allows the ':' char in symbol name in lib.
Fixes: lp:1764166
https://bugs.launchpad.net/kicad/+bug/1764166
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
Nets assigned by power pins are weak, meaning they are valid
as long as there is nothing else attached to such pins. This patch
checks whether there are other wires or pins attached to a power pin
before placing a global net label.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Each named power input pin in Eagle creates an implicit connection to a
net with the name of the pin (e.g. GND, VCC). It is also done for the
units (gates in Eagle nomenclature) that have not been instantiated in
the schematics.
To emulate this behaviour in KiCad:
- Placed components are checked for power input pins, so they will have
global net labels attached to create the described implicit connections.
- As the components are placed, the remaining units of the symbol are
checked for power inputs to see if they need to be instantiated together
with global net labels.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Field Editor dialog calls LIB_EDIT::SetFields() that deletes the old
LIB_FIELD objects and creates new ones. If any of the old LIB_FIELD
objects had been selected before invoking the dialog, then one of the
update UI event handlers will crash trying to access the object.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Renaming a subsheet but keeping the filename should not present a
warning to the user. The was triggered due to comparing a
fully-qualified filename to a relative filename.
Fixes: lp:1744475
* https://bugs.launchpad.net/kicad/+bug/1744475
Eagle support net labels that are naming wires not directly connected to
the labels. In KiCad it is not possible, therefore such detached net
labels need to be moved, so they touch the corresponding wire.
The initial algorithm did not take into account that a moved net label
might be placed on a wire crossing, effectively shorting two nets. This
commit improves the placement algorithm by avoiding the wire crossing
points when placing a label.
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
With hash character starting the reference value, schematic components
are considered as virtual and therefore netlist updater do not warn about
an unsigned footprint anymore. This approach is useful to handle logos,
frames or other virtual Eagle components.
Fixes: lp:1756281
* https://bugs.launchpad.net/kicad/+bug/1756281
ngSpice frequently ends up a simulation with an error:
"Error: ngspice.dll cannot recover and awaits to be detached"
The only way forward is to reload the shared library and
reinitialize ngSpice.
Fixes: lp:1753101
* https://bugs.launchpad.net/kicad/+bug/1753101
Schematic components have illegal characters replaced during load,
leading to broken component-symbol links. To avoid this, library symbols
should have their names fixed in the same way.
Fixes: lp:1752419
* https://bugs.launchpad.net/kicad/+bug/1752419
Duplicate is handled like move/drag but shouldn't mark the original
items as moving. This prevents a redraw from drawing the original
items.
Fixes: lp:1750083
* https://bugs.launchpad.net/kicad/+bug/1750083
Jon Evans
Jeff Young
Wayne Stambaugh
John Beard
Michael Kavanagh
jean-pierre charras
Baranovskiy Konstantin
Seth Hillbrand
Brian Henning
Frank Severinsen
Tomasz Włostowski
joel-bertrand-JKB
Maciej Suminski
D4p0up
Stefan Brüns
Simon Richter
Joël Bertrand
Ronnie Gaensli
Mark van Doesburg
Martin Aberg
Carsten Schoenert
Ben Gamari
Damien Espitallier
Marco Ciampa
Marco Ciampa
hauptmech