Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
Use standard button layout and remove extraneous heading.
Move to TransferDataTo/FromWindow.
Close dialog after printing.
Fixes: lp:1763319
* https://bugs.launchpad.net/kicad/+bug/1763319
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
Take field name sizes and user preference line thickness into account
when calculating placement of the text fields of a hierarchical sheet on
the canvas.
The previous calculations contained some magic numbers which seem to
have been well suited to cases where line width is 8 and text size is
0.050. However, the text collided with the sheet outline as soon as text
size or line width was increased.
This commit has been evaluated with line widths ranging from 5 to 100
and text sizes ranging from 0.02 to 0.200. Also in combination with
characters such as qyg and ÅÄÖÜ in the file/sheet names.
(cherry picked from commit b1a60b2)
When drawing a hierarchical sheet symbol, the text line width for
"Sheet: ..." and "File: ..." are now clamped (limited).
Clamp_Text_PenSize() is used for the calculation.
Before, without the clamping, these text widths grew with the line width
preferences option. That resulted in characters cluttering up.
(cherry picked from commit b76407e)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
Also makes better use of space to significantly increase number
of markers shown.
Fixes: lp:1748676
* https://bugs.launchpad.net/kicad/+bug/1748676
(cherry picked from commit a1d8097)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Three instances of variables named "reference" shadow a typedef
within std::vector producing:
warning: declaration of ‘reference’ shadows a previous local [-Wshadow]
note: shadowed declaration is here
typedef typename _Alloc_traits::reference reference;
This patch works around by renaming "reference" to "schReference".
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
For the path separator in full filename, the sheet filename from the dialog uses the Unix notation,
and the "old" sheet filename uses the default notation (it is the actual filename).
Therefore, on Windows, after closing the dialog, the filename was always seen as modified,
and the hierarchy was incorrectly modified (annotation cleared).
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
Also sets the initial footprint to the current footprint when
doing a Choose Footprint from the Eeschema Edit Property
dialog.
Fixes: lp:1776126
* https://bugs.launchpad.net/kicad/+bug/1776126
Any errors in the dialog should be handled and, at worst, allowed to
redo. SPICE_VALUE throws KI_PARAM_ERROR, so we catch that explicitly.
Fixes: lp:1776051
* https://bugs.launchpad.net/kicad/+bug/1776051
This refactors the symbol field editor's checkbox state-saving code to
deal with multiple projects with disjoint field sets more consistently.
For instance, imagine I have a two projects
* Proj1 has fields A, B, C
* Proj2 has fields A, B, D
Under the old scheme, when I switch from one project to the other the
state of fields C and D will be forgotten. With the new approach,
however, they are retained.
Not to mention, the implementation is considerably simpler. Fixes
This makes it significantly easier to find a particular component when
using the field editor, as I often do for part selection.
Fixes: lp:1772169
* https://bugs.launchpad.net/kicad/+bug/1772169
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
When you search for an item that exists on a separate sheet in the
schematic, the newly loaded schematic sheet needs to have the dangling
flags set so that we don't have a mess of non-connected "o" markers.
Clearing annotations should only clear the settings that can be set by
the matching annotate function. Even in components where the units are
functionally the same, the unit choice should be retained as there are
often other considerations when chosing the unit.
Fixes: lp:1769457
* https://bugs.launchpad.net/kicad/+bug/1769457
The splitter window can not be the parent to any additional windows.
If it acquires a child that persists past the lifetime of the splitter
window, we get a segfault.
Also hooks up the Python netlist reader to the descriptions so
that they appear correctly in BOMs. (The BOM generators used
to always get the root component's description rather than the
alias's description.)
Fixes: lp:1774358
* https://bugs.launchpad.net/kicad/+bug/1774358
std::invalid_argument does not work fine with translated strings as argument for message.
(the translated message is incorrectly or not displayed if it contains non ascii8 chars, at least on Windows).
KI_PARAM_ERROR can be throw-ed with a translatable/translated string (a wxString)
Empty project path is a valid case when eeschema is executed in
standalone mode without any file loaded.
There were no observed harmful consequences of running eeschema without
the project path set, but to stay safe the project specific
sym-lib-table load code is executed only when the project path is set.
In the scenario described in the bug report, the SCH_SCREEN current item
pointer stores an address of a stale object that had been deleted when
the symbol was reloaded. To prevent the crash, the current item pointer
is reset whenever a symbol is loaded.
Fixes: lp:1774296
* https://bugs.launchpad.net/kicad/+bug/1774296
Button "Toggle the search tree" from left toolbar of Symbol Library
Editor does not show actual state of visibility of the search tree
panel. State of this button (checked or unchecked) changes on clicking
only. Toggling panel visibility from menu does not make effect on tool
state.
Applied changes makes tool state (checkd/unchecked) synced with panel
state (shown/hidden).
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
1) Commit in-progress edits before closing preferences.
2) Handle default fields in Symbol Fields Editor.
3) Save state of checkboxes in Symbol Fields Editor.
The original algorithm picked the value from the last component having
non empty value for a given field, but the processing order was
dependent on the layout of the components in the memory. It means that
for each component, the field values could have been taken from any
unit, randomly.
The patch improves the algorithm, trying to get all values from the unit
with the lowest number and resorts to other units only when there are
field values left empty.
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
It was always replaced with space in a graphic text, but it should happens
only in non quoted texts
Now graphic texts containing ' ' or '~' or '"' are always quoted
(work fine with 4.0 version)
Fixes: lp:1771105
https://bugs.launchpad.net/kicad/+bug/1771105
Also fixes a bug where unannotated components would get references
of the form R-1 (because their reference number was -1).
Fixes: lp:1768814
* https://bugs.launchpad.net/kicad/+bug/1768814
Path keeping stack copes well with paths pointing outside the project
directory (e.g. "../path"). The so far used wxFileName::GetDirCount() and
wxFileName::RemoveLastDir() remove too many directories, as ".." is also
counted as a directory.
Fixes: lp:1769746
* https://bugs.launchpad.net/kicad/+bug/1769746
It happens only with option "Reset, but keep order of multi-unit parts, because the algo tried
to propagate the new reference to parts having the same old reference,
without testing if this old reference was duplicated.
Fixes: lp:1769250
https://bugs.launchpad.net/kicad/+bug/1769250
Both "Leave Sheet" and "Library Browser" menu entries were mapped to the
'L' key. Mapped the "Library Browser" entry to the 'B' key.
Fix "Show hidden pins" menu entry capitalization.
Map "Show Hidden Pins" to 'P' key and "Full Window Crosshair" to 'W' key.
Fixes lp:1768671
https://bugs.launchpad.net/kicad/+bug/1768671
This patch prevents fields with long text values from unreasonable
dialog resizing. It is basically commit f4eb63f8 applied to a
corresponding field editor dialog in the Symbol Editor.
Values generated by NETLIST_EXPORTER_PSPICE::GetSpiceFieldDefVal()
and the actual value that was stored in a netlist differed when a
component has multiple units.
Due to that, the Spice model editor dialog incorrectly recognized
"alternate node sequence" value as the default one and cleared it
when the dialog was closed.
Also changes Save Library and Save Library As to work off the
visible selection if there is one.
Also implements enablement for Save All Libraries.
Fixes: lp:1764081
* https://bugs.launchpad.net/kicad/+bug/1764081
This is particularly important when bulk adding (by director, etc.)
as otherwise the user might end up having to click OK to many
many error dialogs.
Fixes: lp:1764057
* https://bugs.launchpad.net/kicad/+bug/1764057
Code fixing Spice device names (prefixing reference with a character
corresponding to the assigned device model type) that was duplicated in
a few places has been moved to a function (NETLIST_EXPORTER_PSPICE::GetSpiceDevice()).
With uninitialized COMPONENT_TREE::m_menuActive there were cases when
application logic erroneously decided to fetch the current library name
from the right click menu selection, even though there was no menu
opened, so an empty string was returned. Empty library name is
equivalent to no library loaded, therefore the save button appeared
disabled.
Fixes: lp:1765937
* https://bugs.launchpad.net/kicad/+bug/1765937
When a relative sheet path was not in the project path or a subfolder
within the project path, the schematic path would be empty. Set the
base path to the project path when the schematic path is no within
the project path hierarchy.
When LIB_ALIAS is renamed, it validates the new name. In case the name
typed in the field edit dialog is invalid, there was a discrepancy
between the name used further in the code and the actual alias name.
Fixes: lp:1765375
* https://bugs.launchpad.net/kicad/+bug/1765375
The main purpose of the patch is to load libngspice from macOS bundle.
There are also some additional paths that could make Windows developers
easier.
Fixes: lp:1630675
* https://bugs.launchpad.net/kicad/+bug/1630675
The messages on sheet duplication are changed to reflect the action
perceived by the user when accepting/rejecting the change.
Annotation is also reset for duplicating sheets where maintaining
existing annotation would conflict with existing sheets.
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
Because the cache is broken, the rescue library was never created after missing library or change in lib.
This was due to the fact the symbol name inside the cache is broken, since commit a5844c9,
because all illegal chars in symbol name are replaced by '_'.
Unfortunately, in library cache, the ':' (illegal in usual libraries) is used to build the cached symbol name.
so in lib cache, symbol names were broken, making this lib useless.
this fix allows the ':' char in symbol name in lib.
Fixes: lp:1764166
https://bugs.launchpad.net/kicad/+bug/1764166
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
Nets assigned by power pins are weak, meaning they are valid
as long as there is nothing else attached to such pins. This patch
checks whether there are other wires or pins attached to a power pin
before placing a global net label.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Each named power input pin in Eagle creates an implicit connection to a
net with the name of the pin (e.g. GND, VCC). It is also done for the
units (gates in Eagle nomenclature) that have not been instantiated in
the schematics.
To emulate this behaviour in KiCad:
- Placed components are checked for power input pins, so they will have
global net labels attached to create the described implicit connections.
- As the components are placed, the remaining units of the symbol are
checked for power inputs to see if they need to be instantiated together
with global net labels.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Field Editor dialog calls LIB_EDIT::SetFields() that deletes the old
LIB_FIELD objects and creates new ones. If any of the old LIB_FIELD
objects had been selected before invoking the dialog, then one of the
update UI event handlers will crash trying to access the object.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Renaming a subsheet but keeping the filename should not present a
warning to the user. The was triggered due to comparing a
fully-qualified filename to a relative filename.
Fixes: lp:1744475
* https://bugs.launchpad.net/kicad/+bug/1744475
Eagle support net labels that are naming wires not directly connected to
the labels. In KiCad it is not possible, therefore such detached net
labels need to be moved, so they touch the corresponding wire.
The initial algorithm did not take into account that a moved net label
might be placed on a wire crossing, effectively shorting two nets. This
commit improves the placement algorithm by avoiding the wire crossing
points when placing a label.
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
With hash character starting the reference value, schematic components
are considered as virtual and therefore netlist updater do not warn about
an unsigned footprint anymore. This approach is useful to handle logos,
frames or other virtual Eagle components.
Fixes: lp:1756281
* https://bugs.launchpad.net/kicad/+bug/1756281
ngSpice frequently ends up a simulation with an error:
"Error: ngspice.dll cannot recover and awaits to be detached"
The only way forward is to reload the shared library and
reinitialize ngSpice.
Fixes: lp:1753101
* https://bugs.launchpad.net/kicad/+bug/1753101
Schematic components have illegal characters replaced during load,
leading to broken component-symbol links. To avoid this, library symbols
should have their names fixed in the same way.
Fixes: lp:1752419
* https://bugs.launchpad.net/kicad/+bug/1752419
Duplicate is handled like move/drag but shouldn't mark the original
items as moving. This prevents a redraw from drawing the original
items.
Fixes: lp:1750083
* https://bugs.launchpad.net/kicad/+bug/1750083
The backup code was designed for a project with all of the schematics
in the project folder which is not always the case. Fix the schematic
backup to keep the schematic folder structure in tact during backups.
Fixes lp:1751662
https://bugs.launchpad.net/kicad/+bug/1751662
Keep any Eeschema color except background a fraction off of true white
to ensure that BW printing shows the lines as black. Only the
background is allowed to be white in an Eeschema printout.
Fixes: lp:1662859
* https://bugs.launchpad.net/kicad/+bug/1662859
For some reason, when calling python and giving a full filename script, the last separator in the filename
must be '/', not '\'.
Otherwise the import command inside the script does not find files to import in the same folder as the script.
We cannot replace blindly '\' to '/' in command line because it does not work for file on a server (name starting by \\server_name\).
So the fix is just replacing one '\' in python script full filename.
This is not perfect, but at least it works for newly created plugin commands.
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
Currently, if a old label already containing a '/' (or a space) is edited, it is accepted,
but no new not allowed char can be added to the label.
(Previously, a sheet pin label was not filtered)
This also makes the dialog modeless so that one switch between
sheets while annotating to choose the base numbers for each
sheet (assuming they don't like the base number we pick because
of the order of the sheets).
Fixes: lp:1154131
* https://bugs.launchpad.net/kicad/+bug/1154131
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
Local net labels are preceded with sheetpath (even for single sheet
schematics it is '/') causing net name conflicts between schematics and
layout. It can be easily avoided by using exclusively global net
labels, at the cost having uglier schematics.
After Eagle project import, schematic and board netlists are inconsistent:
footprints do not have sheetpaths assigned, schematics are unannotated.
One can update netlist either by references or timestamps, but timestamps
are empty in pcbnew, and updating by reference must by preceded by
annotation which may lead to broken links between board and schematics
(Eagle does not require references to end with a number, so KiCad annotater
will add numbers in such cases).
To fix the problem, there is a two step netlist update:
- update by reference without the annotation step, to assign
correct sheetpaths to footprints
- update by timestamp, after symbols are annotated, in order to
update references in the board
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
Board update KiWay request may now contain options in the message
payload:
- "no-annotate": do not enforce annotation
- "quiet-annotate": annotate without displaying a dialog
- "by-reference": update netlist by reference, no dialog displayed
- "by-timestamp": update netlist by timestamp, no dialog displayed
Sheet file name paths were not being saved and restored properly under
certain conditions when walking the sheet hierarchy causing schematic
load errors.
Changed debugging output to use wxLogTrace left over from last fix.
Fixes lp:1748401
https://bugs.launchpad.net/kicad/+bug/1748401
Deleting lines can create new ones when old lines are merged as the
result of a delete operation. This checks that all items inside a
selection block are deleted before finishing.
Fixes: lp:1748907
* https://bugs.launchpad.net/kicad/+bug/1748907
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
Try as you might to keep them fresh, there's no gaurantee.
Instead, just treat them as weak references and search the
existing items for a pointer-value match.
This also allows us to remove some code which kept recycling
the search position back to the start ever time a replace
was done.
Fixes: lp:1559258
* https://bugs.launchpad.net/kicad/+bug/1559258
Extra labels to preserve eagle named nets feature are now placed at the
end of a wire segment instead of the middle of a wire. Prevents a label
being placed on crossing wires that are not connected by a junction
resulting in an incorrent netlist.
Many had already been fixed but weren't working on Mac because
of the DIALOG_SHIM hack (now fixed). Others hadn't been updated
yet. Also includes some cleanup for elipses in buttons and
layout.
Fixes: lp:1748506
* https://bugs.launchpad.net/kicad/+bug/1748506
File names can be reliable compared only after normalization. The
problem is the easiest to observe on Windows, where one can use slash or
backslash as path separator, so even though C:/file.txt and C:\file.txt
pointed to the same file - simple string comparison would indicate they
are different files.
Fixes: lp:1744724
* https://bugs.launchpad.net/kicad/+bug/1744724
1) don't call UI-level LIB_PIN routines when reading library --
not only are they a performance hit, they set the modified flag
too
2) limit progress dialog updating to 15 times a second (this
had crept back up to 31% of the time spent loading libraries)
Fixes: lp:1734773
* https://bugs.launchpad.net/kicad/+bug/1734773
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
1) Edit Symbol gets similar fix as Place Symbol
2) progress dialog updating reduced to once every 50ms
3) SearchText gets lazy normalization
4) TypeNames get lazy translation
5) default fieldNames get translated a single time per language change
These fixes reduce first-load-time of both Edit Symbol and Place Symbol
by about 2/3, and second-load-time of Edit Symbol to near-instantaneous.
Spice netlist exporter processes all texts on the exported schematic
sheet to find spice directives and include them in the output file.
By default it also added ".title KiCad schematic" in the first line, so
if there was another .title directive in the exported schematic sheet,
the generated file would contain two .title directives.
This patch looks for .title directive and when one is found - it uses
the specified title in the first line.
This commit aims at making the pin edit coupling easier to understand.
It renames the mode to 'synchronized pin edit', shortens the description
and inverts the logic to avoid double negation.
To make the code clearer, two items have their name changed to fit the
new description:
- m_editPinsSeparately -> m_syncPinEdit
- ID_LIBEDIT_EDIT_PIN_BY_PIN -> ID_LIBEDIT_SYNC_PIN_EDIT
This adds a set of conditions that will prevent a wire from being
automatically trimmed. Wires that are currently being moved or are
newly created or are explicitly avoided will not be removed. This also
adds a function to set a flag on items in a block.
Fixes: lp:1744632
* https://bugs.launchpad.net/kicad/+bug/1744632
Don't use wxFileName == operator when comparing cache file name. There
is a lot of overhead the wxFileName == operator that is not necessary
so just do a comparison with the original string used to create the
cache.
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
The alias list now displays the user model (multiple aliases *of*
a root part, rather than a collection of names *including* the
root part). This simplified the error detection logic, fixing
the first bug in the bug report.
Updating the part in the library is now done uniformly on OK
(which was the second bug in the bug report).
Fixes: lp:1744656
* https://bugs.launchpad.net/kicad/+bug/1744656
The crash happened when during rename operation, when the original part
buffer has been marked as deleted, but its memory was not yet freed. The
renamed part was still using the original SCH_SCREEN object, which was
freed together with the original part buffer.
The highlight colour on some platforms (OSX, for instance)
renders nearly invisible against a white background. However,
wxWidgets doesn't handle background colours on OSX and GTK+.
A separate commit to the new kicad/wxWidgets fork fixes OSX,
and we continue to use the old highlighting on GTK+
Fixes: lp:1741719
* https://bugs.launchpad.net/kicad/+bug/1741719
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
At least on Linux, if a null icon is used as icon in Pin Type column, other icons are not
displayed. So the workaround is to use a neutral icon when a specific icon cannot be used
(i.e. when pins are grouped)
Fixes: lp:1559542
https://bugs.launchpad.net/kicad/+bug/1559542
Schematic cleanup only makes sense after the libraries are fully updated
and loaded. Before pin caching, this was a minor difference but once we
needed to update pin caches, schematic cleanup can remove junctions from
pin-wire connections incorrectly.
Instead, we use the global OpenProjectFiles() schematic cleanup call to
be sufficient and not call a second time, prior to all libraries being
rescued and loaded.
Fixes: lp:1743148
* https://bugs.launchpad.net/kicad/+bug/1743148
Major cleanup of many icons (started as a simple effort to tweak libedit and modedit icons)
Ref: https://lists.launchpad.net/kicad-developers/msg32860.html
* Each application icon has been updated
* Consolidated icon "modifiers" across many icons
* Replaced confusing arrows with "load" and "save" icons
* Slight code updates to reference correct icons
* Consolidate multiple representations of single icon type(s)
The component tree model was always saving the root symbol name which
prevented the actual alias from be selected in the symbol chooser
dialog. This also prevented the correct documentation information
from being shown in the information panel.
Fixes lp:1740742
https://bugs.launchpad.net/kicad/+bug/1740742
Change the behavior of the remapping algorithm to remap even if a
project symbol library table exists in the project file in case a
previous attempt to remap failed. The existing symbol library table
is backed up to the back folder and rebuilt.
Fixes lp:1741983
https://bugs.launchpad.net/kicad/+bug/1741983
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
File names with spaces were causing invalid symbol names in both the
rescue library and the cache which would cause both libraries to fail
to load because library symbol names are not escaped so the spaces
tripped up the library parser. Replace the spaces in the file names
with hyphens and in both the rescuer and the remapping code so the
library nickname in the symbol library table does not contain spaces.
Update the symbol library table dialog to prevent users from defining
library nicknames with spaces. This is different than the footprint
library table which allows nicknames with spaces. This solution is
a temporary fix until the new symbol library and schematic file formats
are implemented.
Fix off by one row in illegal nickname error message in the symbol
library table editor.
Crash was caused by removal of the selected item from the
wxDataViewModel, which was later accessed in
COMPONENT_TREE::GetSelectedLibId(). To avoid the problem, the selection
is validated before regenerating the tree widget.
Fixes: lp:1740952
* https://bugs.launchpad.net/kicad/+bug/1740952
This commit is a partial revert of aa81f5b9 & 445ac505. LIB_ID should
not be modified when a library is assigned to its part, as the library
nickname cannot be evaluated during the assignment and might be
different than its filename.
Fix a bug where the full LIB_ID was not being used to look up the name
of the symbol in the cache library preventing the rescue to work when
rescuing symbol library table projects.
Add information as to why a symbol was rescued rather than only showing
what symbols were rescued.
Do not add rescue suffix to symbol name for symbol library table rescues
because if a symbol name exists in multiple libraries that need rescued
at the same time will cause subsequent symbol rescues to be overwritten.
Append the nickname of the schematic symbol library to prevent symbol
name clashes in the rescue library.
Verify the library symbol of the field being edited still exists rather
than use an assertion because it is entirely feasible that the library
symbol or library containing this symbol has been deleted and will cause
a segfault. Unfortunately there is no way to determine if the symbol is
a power symbol or not so just set it as a regular symbol so the user can
still edit the schematic symbol field.
Fixes lp:1742111
https://bugs.launchpad.net/kicad/+bug/1742111
When a LIB_PART object is removed, it deletes all of its aliases.
When the last one is removed, it tries to report the name of the
parent part, but as it has no aliases - it cannot return a valid name.
Use the symbol found in the library when the symbol is not in the cache
library.
Add an assert to prevent dereferncing a null pointer in the future even
thought this should not happen as the rescue algorithm does not add a
candidate when a symbol cannot be found in either the cache or any other
library.
Fixes lp:1741964
https://bugs.launchpad.net/kicad/+bug/1741964
Calling wxListBox::SetSelection( wxNOT_FOUND ) changes the internal
state of the widget without the intended visual effect (show nothing
selected). It leads to a situation when the default choice is overridden
with wxNOT_FOUND, even though the list box shows a valid value.
As there is no point in calling wxListBox::SetSelection( wxNOT_FOUND ),
the confusing call has been removed.
Dialogs displaying a lot of scrollable data should use SetSizeInDU()
instead, as FinishDialogSettings() will set a minimum size equal to
whatever can contain all the data (making it overflow the screen for
large amounts).
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
CHANGED: When a workbook file is saved from the simulation dialog
in eeschema, the extension is automatically added if it is not
specified. This behaviour is consistent with the workbook loading
dialog, which filters the filelist for only ".wbk" files with no
"all files" option.
Change term "Flip Horizontal" to "Mirror About Horizontal(X) Axis" in
the schematic editor symbol context menu to improve clarity.
Change term "Flip Vertical" to "Mirror About Vertical(Y) Axis" in the
schematic editor symbol context menu to improve clarity.
Change to the same mirror terminology in the block context menu.
Change "Exchange Footprint" to "Change Footprint" in the board footprint
context menu for improved clarity.
Fixes lp:1740593
https://bugs.launchpad.net/kicad/+bug/1740593
Create separate folder in project path to backup files changed during
remapping.
Add time stamp to backup file names in case multiple remappings are
performed.
Add backup file information to report panel instead of using debug
trace messages.
Disable the remap button if the user does not have write privileges to
the current project path.
The Windows drive specifier C: was being interpreted as a valid URL by
wxURI which was performing a URL comparison instead of a file comparison
which always failed in LIB_TABLE_BASE::FindRowByURI(). Change test for
URI to search string for "://" to determine if the comparison should be
a URI (string) comparison or a file (wxFileName) comparison.
Don't run final rescue unless the user performs the remapping.
When an attempt to resolve a library symbol link having a library
nickname that was no longer found in the symbol library table, the
symbol resolution was not falling back to the cache library due to
a silently handled exception. Add check for valid symbol library
table nickname before attempting to resolve symbol link to prevent
exception bypassing falling back to the cache library.
Fixes lp:1740609
https://bugs.launchpad.net/kicad/+bug/1740609
A new legacy symbol library plugin deletes all of the aliases from each
LIB_PART object that it owns cause an assertion in the dtor which calls
GetName() which checks for an empty alias list to prevent a segfault.
Remove the call to GetName() from the dtor trace message.
Fixes lp:1740597
https://bugs.launchpad.net/kicad/+bug/1740597
Store the currently-edited item in the base screen class
instead of the libedit_frame. This allows us to access it
for double-click disambiguation and harmonizes the library
editor with the schematic editor code that already does this.
Fixes: lp:1738694
* https://bugs.launchpad.net/kicad/+bug/1738694
The GetName() method attempts to access the first LIB_ALIAS pointer in
the m_aliases member without checking if m_aliases is empty. This
should never happen because a new LIB_PART creates a LIB_ALIAS object
in the ctor. Some how, this is getting bypassed and causing Eeschema
to crash in the LIB_PART dtor on debug builds. GetName() now checks
for an empty alias list to prevent a null pointer segfault.
Fixes lp:1739614
https://bugs.launchpad.net/kicad/+bug/1739614
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the common, 3D viewer, CvPcb, and Eeschema code paths.
Updated the use of component to symbol.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
The remapping utility would create a new project specific library when a
symbolic link pointed to a library already defined in the symbol library
table. Now the comparison checks to see if the library path and file
name are actually a symbolic link if the file names are not the same when
the symbol library table entry is a file name rather than a URL. URLs
are simple string comparisons.
Disable the remap button after the remapping completed.
Remove some commented out code from the edit symbol in schematic dialog.
Fixes lp:1738634
https://bugs.launchpad.net/kicad/+bug/1738634
Allows buses to acquire junctions based on their connections. Buses
can only have junctions with other buses. Also allows buses to be
draggable junctions for collections
This adjusts the selection addition criteria for
blocks to allow items such as labels to connect to
lines not at the endpoints. It also uses the same
logic to correctly gather bus-wire, bus-bus entries.
Fixes: lp:1738941
* https://bugs.launchpad.net/kicad/+bug/1738941
Apparently explicitly requesting a column to be sorted breaks component
filtering on Windows. Without SetSortOrder() call the list is sorted and
filtering still works as expected.
Fixes: lp:1739412
* https://bugs.launchpad.net/kicad/+bug/1739412
Please never ask me about the SetSortOrder() part. When it is set to
'true', wxDataViewCtrl::EnsureVisible() does not always work correctly,
so sometimes the best search result is not shown in the window (no
pattern found). Now it is set to 'false' to avoid the described
behavior, but the sorting order is reversed on Windows, not on Linux.
I could not test it on OSX, but I am sure it paints walls in your room
pink. /me burst into tears.
Fixes: lp:1738696
* https://bugs.launchpad.net/kicad/+bug/1738696
Enable "save curr lib" tool of main toolbar when modified even if this lib is empty.
It happens when all items are erased, and it is consistent with the close libedit dialog
that ask for saving all modified libraries
Standalone eeschema did not have the project path set when importing
a non-KiCad sheet. Due to this any libraries created during the import
were saved to the directory of eeschema executable instead of the actual
schematic directory.
The previous implementation relied only on the project name. When it is
set, the imported library was named '-eagle-import'. Now it tries
the project name and then the file name, using 'noname-eagle-import'
as fallback.
The library name is stored in the plugin to avoid changing the library
name after the project name has been set.
Marks wire-bus entries as not dangling if there is at least a wire
and a bus on each end. Corrects behavior when wires and buses overlap
at the endpoint.
The reason the component tree widget was cleared on Windows is the fact
m_adapter->UpdateSearchString( m_query_ctrl->GetLineText( 0 ) ) is
called on any change of the symbol. But if m_query_ctrl is empty,
m_query_ctrl->GetLineText( 0 ) returns the "hint" (currently the word
"Search") not the actual value, so there is no "candidate" symbol in
list. Using m_query_ctrl->GetValue() returns the actual value and fixes
this issue.
Fixes: lp:1737132
* https://bugs.launchpad.net/kicad/+bug/1737132
Pins are weak_ptrs to the library, so they require a lock() before
accessing. This imposes a performance hit on fast loops that access
the pin list repeatedly. This patch caches the pin position locally
for each component, updating only when needed.
Fixes: lp:1737363
* https://bugs.launchpad.net/kicad/+bug/1737363
COMPONENT_TREE::STATE used wxDataViewItem to store the selection, but it
will point to a deleted object if the selection was removed. Switched to
storing the selection using LIB_ID as it is much safer to use.
Show the NC box only on pins connected via the same component,
indicating a stacked pin group. Do not show NC box on pins for
different components with the same symbol.
If a schematic contains two symbols with the same name from different
libraries, the cache will contain the last symbol saved with that name.
Prepend the library nickname with the original schematic symbol library
nickname when saving the cache library to prevent name collisions.
With the implementation of the legacy schematic plugin, any I/O error
when parsing the schematics would prevent the entire schematic from
being loaded. This change restores (somewhat) the previous behavior
where as long as the root schematic is loaded properly, then all of
the remaining sub-sheet will attempt to load.
Add GetError() method the SCH_PLUGIN object to allow for partial
schematic loading.
Check the error message contents when no exception was caught to warn
the user of any accumulated errors.
Fixes lp:1690644
https://bugs.launchpad.net/kicad/+bug/1690644
Fixes the connection display and dragging behavior of wires,
busses and their entries.
The implemented drag logic is:
-busses and bus-bus entries drag each other when connected at endpoints
-wires and wire-bus entries drag each other when connected at endpoints
-entries do not drag wires or busses when connected to wire middles
-wire-bus entries do not drag busses
The implemented connection logic is:
-bus-bus entries connect busses to busses but not wires
-wire-bus entries connect wires to busses but not wire to wires or
busses to busses
It turns out the fastest way to update wxDataViewCtrl is to nuke the
model and rebuild it from scratch rather than via
ItemAdded()/ItemDeleted() update notifications.
Fixes: lp:1734773
* https://bugs.launchpad.net/kicad/+bug/1734773
CHANGE: In Eeschema, when placing a component directly over an existing
wire, the wire is automatically removed where it shorted pins.
This helps workflow in Eeschema, allowing one to quickly add components
to existing lines.
Fixes: lp:1678449
* https://bugs.launchpad.net/kicad/+bug/1678449
This is the last of the object save/load code that was not moved into
the SCH_LEGACY_PLUGIN object. All schematic and library I/O is now
performed in the SCH_LEGACY_PLUGIN object and as been removed from the
schematic and library objects.
The old single symbol file format has been replaced with the normal
symbol library file format since there was no difference between them
except the SYMBOL token. The SYMBOL token was no longer being read
since the introduction of the SCH_LEGACY_PLUGIN symbol library loader.
Update the Doxygen comments in all of the modified files.
BreakSegment now breaks a known segment and BreakSegments
breaks all segments. This allows functions to break a
segment without needing to iterate through the whole list.
Changes to the schematic shouldn't be made
where the user isn't looking. Removing the
cleanup in ERC and netlisting prevents
unintended consequences
CHANGE: ERC and Netlist calls do not modify schematic
SCH_LINE can represent a bus, wire or graphic line. Checking
for the corner needs to distinguish between these types.
Fixes: lp:1635984
* https://bugs.launchpad.net/kicad/+bug/1635984
Make the user prompt an HTML control for improved layout.
Fix some column title sizing issues. This is not a complete fix but
it seems better than the default sizing done by wxWidgets.
Use symbol terminology instead of part and/or component.
Create trace string source files for a common place for them and their
Doxygen comments.
Don't back up schematic files unless the user requests a remap.
Back up all files that could be changed by a remap including the
schematic file(s), cache library, project file, and rescue library
files.
Use an HTML control instead of a static text control for improved layout
of the user remap prompt.
Improve the user prompt in the remap dialog to make it clear that changes
will be made to project files.
Duplicated aliases were given " (copy x)" suffix. There are two
problems: aliases cannot contain spaces and the string was translatable
which could create more issues. Now duplicated aliases receive "_x" suffix.
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
Dragging a full line that is connected to a component
now drags the component as part of the block, maintaining
connections.
Fixes: lp:1167714
* https://bugs.launchpad.net/kicad/+bug/1167714
Removed cut & copy toolbar icons in the schematic editor, as they
were inaccessible. One cannot have an item selected and move the
mouse outside the canvas area due to autopanning.
Added paste icon to the library editor.
Tree nodes now have an additional field 'InTree' to determine
if the view is aware of its existence. This way, there is no need
to rebuild the data structures from scratch when they need to be
filtered.
Library Editor updates its working copy of the edited part every time
it is modified. If LIB_EDIT_FRAME::PlacePin() calls OnModify() too early,
the working copy does not include the last change.
Jeff Young
Mark van Doesburg
Wayne Stambaugh
jean-pierre charras
John Beard
Martin Aberg
Baranovskiy Konstantin
Maciej Suminski
Carsten Schoenert
Seth Hillbrand
Ben Gamari
Simon Richter
Damien Espitallier
Marco Ciampa
Jon Evans
Marco Ciampa
Tomasz Wlostowski
hauptmech
Michael Kavanagh
Russell Oliver
Kristoffer Ödmark
Michael Geselbracht
Chris Pavlina
Martin Sivak
ludovic léau-mercier
Dan Weatherill
Oliver
Camille
Dan Weatherill
Mark Roszko
Nick ?stergaard
Christian Jacobsen
Andrew Wygle
Henner Zeller
Bernhard Stegmaier