This one is primarily about pushing TEXT_ATTRIBUTES in to the GAL
API, but it also includes adding EDA_ANGLE signatures to some trig
routines to ease integration.
On wx3.0, the HTML format #RRGGBBAA cannot handle the alpha channel.
Instead, we route this through a COLOR4D routine when we need to use
these colors
Fixes https://gitlab.com/kicad/code/kicad/issues/9963
Improves rendering performance, esp. for large designs by:
- using a separate glDrawArrays calls() for large buffers of contiguous vertices (e.g. large zone fills)
- pooling smaller items into a small-sized index buffer held in system RAM (has to be DMAed to the GPU by the driver anyway)
Previously, the count of segments used a magic number optimized for Pcbnew.
This is not good, and does not work well on Gerbview.
The count uses now a max error acceptable is approximation (5 microns in Gerbview and Pcbnew).
Fixes#9101https://gitlab.com/kicad/code/kicad/issues/9101
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
Reduce each (Accel & Fallback) to 3 options: Off, Fast, Good. Fast AA
in accelerated canvas uses SMAA with tweaks suggested by David Beinder.
Good AA is super-sampled x2.
Cairo is similarly reduced to Off, Fast, Good, which map to the Cairo
options themselves. Best is removed as it mostly affects text rendering
and not line drawing (as our text is)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8522
Conservative makes SMAA usable in Eeschema through weaker AA.
Aggressive reduces some artifacts compared to the High preset.
Restores the unused Ultra preset in the shader source to its original state.
Avoid fractional pixel offsets by forcing integer division of m_screenSize.
Shift rounded lookAtPoint onto OpenGL pixel center to ensure consistent rounding to int.
The pixel 0..1 @ 1x needs to fill the area 0..2 @ 2x so its center moves by 0.5 * (pixel size @ 1x).
Initialized COLOR4D takes an EDA_COLOR_T enum but then referenced it as
an index to the color table. This uses the enum as comparison against
the table-stored enum.
Adds standard orange to picker swatches
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
The native cursor must be set on the GAL canvas wx object,
not its frame (otherwise on GTK the cursor is only set
when we get a request for it from the WM and not immediately).
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
Vertex memory allocation uses malloc and realloc without checking the
result. Throw exceptions that can be caught in the DoRepaint() method
in EDA_DRAW_PANEL_GAL when malloc and realloc return a null pointer.
We had been using each 4th column of spaces. But we needed an absolute
spacing rather than relative to the existing text to match spacing
between the input text box and our stroke font
On non-Unix, the platform selection is in platform.h, not on the command
line using the preprocessor macros from wx-config.
<wx/setup.h> relies on the platform being selected correctly, if it is
included directly, it cannot determine the correct configuration with
Visual Studio.
wxWidgets 3.1.5+ on Linux will compile with the Wayland EGL
canvas as the backend instead of the X11 backend. This requires a
version of GLEW compiled with the proper EGL defines and a different
header/code for certain parts that are X11 GLEW specific.
This introduces an in-tree version of GLEW that will be built with the
GLEW_EGL flag then statically linked into the KiCad executables when
EGL support is needed.
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
The base GAL has the linewidth property already, and its
accessor will only return the base version. This was causing
problems with the Cairo printing GAL, since that setter wasn't
using the base class version. Also, this removes the print-specific
setter, since the actual setting of line width shouldn't be done
there and is instead done where the drawing happens.
Fixes https://gitlab.com/kicad/code/kicad/issues/5089
On platforms with limited framebuffer attachments, like GC7000L
driven by the open source etnaviv driver, we can still use
GPU acceleration by drawing directly to the main buffer.
EDA_DRAW_PANEL_GAL::onPaint checks if an overlay target is
available in the GAL, and if not, redraws the whole view if the
overlay target should be dirty.
Clearing of the overlay target is a no-op if there is no overlay
buffer.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
aGridSize.x or aGridSize.y can be null if the config file has stored
0 as size.
This is illegal and crashed Kicad.
The min legal value is 1.0 in internal units
- New public static function OPENGL_GAL::CheckFeatures() gets called in EDA_DRAW_PANEL_GAL::SwitchBackend() before switching to OPENGL_GAL
- Moved all OpenGL feature checks from OPENGL_GAL constructor to OPENGL_GAL::init()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4714
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
The scaling factor stored inside the canvas is created by a DPI_SCALING
helper, which will call the platform-specific functions if no user scaling
is specified. This change only affects OSX and Retina displays, so this
now also allows custom scaling to be used on OSX if desired (although it
shouldn't be needed, since wx has detection for it in 3.0.4).
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Note that since the markup might exist for other reasons, it has
to be turned on with a preference setting. (It goes through a set
of bitflags so the same architecture can be used for other markup
structures that we might want to support in the future.)
Note also that this is more about engineering nomenclature than
visual formatting. In that respect it's more similar to overbar
than italic or bold.
deque structures have higher overhead than vectors. Not usually
problematic, but with hundreds of thousands of characters each with only
a few strokes, the overhead becomes dominant.
This mixes the de-emphasized layers into the background color rather
than merely a black color. This also keeps some of the original layer
color.
Fixes: lp:1831316
* https://bugs.launchpad.net/kicad/+bug/1831316
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
First, add automatic detection of toolkit DPI scaling options. For now, this
is, in order,
* Check the GDK_SCALE option under GTK+ (users can set this to force the scaling)
* Check the value from WX's GetContentScalingFactor(). This will start to work
correctly from WX 3.1 and GTK+ 3.10.
Then, add a user-settable override in the main prefs panel, next to the icon
scaling. This is independent of the icon scaling options.
DPI handling is performed in a standalone class, so they can be shared between
the prefs UI and the OpenGL backend easily. Also means Cairo could use the same
interface in future.
Also adjust the OpenGL grid drawing code to use the computed scale factor,
which avoids over-thick grids in scaled environments (the user can manually
thicken the grid if wanted).
Fixes: lp:1797308
* https://bugs.launchpad.net/kicad/+bug/1797308
Jeff Young
Mark Roszko
Ola Rinta-Koski
Mike Williams
Seth Hillbrand
Tomasz Wlostowski
Ian McInerney
jean-pierre charras
Wayne Stambaugh
luz paz
david-beinder
Hajo Nils Krabbenhöft
Jon Evans
Marcus A. Romer
Simon Richter
mntmn
Qbort
Seth Hillbrand
John Beard