0c9d08249f
Fix crash where dummy edge doesn't have a valid parent.
2020-08-13 00:07:59 +01:00
393bb0fd83
Fix assert where geometry routine wasn't ready to handle layers.
...
This introduces layer handling to a lot of the geometry routines.
Many of them don't do much with it now, but it does help multi-layer
zones and will help when padstacks are implemented.
2020-08-12 22:20:08 +01:00
463100d67f
Remove a long-standing hack to keep divots out of adjacent zones.
...
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.
Fixes https://gitlab.com/kicad/code/kicad/issues/3812
2020-08-12 22:20:08 +01:00
2c8d20207e
Allow micro-via to begin/end in middle layers
...
Microvias can be drilled through adjacent layer pairs, not just F_Cu and
B_Cu
2020-08-10 03:27:27 +00:00
41edf5c5bf
Updating DRC to handle vias with differing layers
2020-08-10 03:27:27 +00:00
5fc6b74c89
ADDED: Remove unused pads
...
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
2020-08-10 03:27:26 +00:00
9b3ff5af47
Fix a few I18N issues.
...
Especially keywords should not be included in translated strings.
2020-08-09 20:38:35 +02:00
c6e388db14
Implement an app progress indicator in the taskbar
...
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
2020-08-09 10:55:00 +00:00
02bf5d27df
Fix crash when a DRC rule specifies an empty zone as a keepout.
2020-08-08 16:25:30 +01:00
db501c2002
Fix issue with doing DRC on a multi-layer zone.
...
Testing for an intersection of layers between the zone and the
item (track in this case) isn't enough: we need to test for the
presence of the item on each layer of the zone.
Fixes https://gitlab.com/kicad/code/kicad/issues/5102
2020-08-07 22:40:18 +01:00
1671c3356d
Fix typo where "continue" got put on wrong side of closing brace.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5100
2020-08-07 22:40:18 +01:00
e5b50d90a7
Update DRC rules to new layer and disallow grammars.
...
Also adds support for hooking rules up to named zones.
Fixes https://gitlab.com/kicad/code/kicad/issues/2041
2020-08-07 21:49:36 +01:00
f27661fa39
Be more flexible with user input; more multibyte safety.
2020-08-06 19:38:06 +01:00
9c9fdb2569
More performant (and more correct) deletion of DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5057
2020-08-04 11:45:07 +01:00
c56599ab07
Allow ERC/DRC markers to be deleted without deleting exclusions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4953
2020-08-02 22:45:48 +01:00
6d319e5bf7
Both pads must have nets to be shorting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5047
2020-08-02 17:05:13 +01:00
fdb23d1a2d
Add DRC check for items (pads for now) shorting two nets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4955
2020-07-30 21:42:23 +01:00
577c1be391
Report all DRC rule errors, not just the first.
2020-07-30 14:27:42 +01:00
5a1b1c544a
Add layer to rule grammar.
2020-07-30 14:27:42 +01:00
89a953e039
Migrated GetEffectiveShape(s) to SHAPE_COMPOUND
2020-07-29 23:14:03 +02:00
0fecb5f277
Be more explicit about string/character conversions.
...
This *may* fix the bug where a layer name isn't displayed correctly
in the error dialog. But probably not.
2020-07-28 20:44:40 +01:00
bf445c1a95
Performance enhancements.
...
1) cache pad polygon outlines
huge improvement in connectivity performance and a decent
improvement in DRC performance
2) don't pre-allocate CONTEXT stack
significant improvement in DRC rule performance
2) don't keep re-encoding strings
decent improvement in DRC rule performance
2020-07-25 13:03:33 +01:00
f97c50bfde
Give excluded DRC items their own layer.
...
(And fix a bug with the new mulit-layer zones and rule-based keepouts
at the same time which prevented me from testing it.)
Fixes https://gitlab.com/kicad/code/kicad/issues/4954
2020-07-24 01:28:25 +01:00
6529e339a9
Don't store context in the uCode. (It's not thread-safe.)
...
Although it does give some pretty funny results when filling zones.
2020-07-23 22:21:13 +01:00
a6b6084a60
Add preflighting for DRC rule function calls.
2020-07-22 14:33:32 +01:00
c52df811ae
Add expression eval to constraint min/max/opt values.
...
Also adds error reporting for above.
2020-07-21 23:43:10 +01:00
095937563b
Hook libeval compiler up to rule parser
...
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
2020-07-20 22:11:53 +01:00
998c216487
Remove some nag tests which keep you from doing a DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4845
2020-07-09 16:22:59 +01:00
5226d6b4df
libcommon build: add NGSPICE_INCLUDE_DIR in include list (similar to Eeschema build).
...
Useful when ngspice is build by the developer in a specific folder.
Fix also an other minor compil warning.
Fixes #4851
https://gitlab.com/kicad/code/kicad/issues/4851
2020-07-09 08:46:59 +02:00
d85a707385
Move rest of DRC to SHAPE collision architecture.
2020-07-06 20:00:50 +01:00
2a1550d1d2
Don't crash when failing to deserialize old exclusions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4820
2020-07-06 12:53:55 -04:00
0d8c6d43a8
fix minor I18N issues.
2020-07-06 13:47:42 +02:00
8ffa86a63f
get it to compile after rebase
2020-07-05 22:44:38 +02:00
8bb442ac37
pcbnew: try to compile 'old' DRC alongside the new prototype
2020-07-05 22:44:38 +02:00
12b4a55ae8
Port Eeschema to new project settings
...
DRC/ERC error serialization changed to use explicit tokens
Old stored severities and ignored errors are discarded
2020-07-02 22:08:54 -04:00
c0aa6965de
Migrate PcbNew project settings to new framework
...
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
2020-07-02 22:08:54 -04:00
441dfa30f0
Return individual custom pad shapes instead of a SHAPE_POLY_SET.
...
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.
Fixes https://gitlab.com/kicad/code/kicad/issues/4774
2020-07-02 17:09:15 +01:00
424d551054
Cache pad bounding boxes for performance.
...
Also allows us to return to a LOD test for pad numbers which treats
round and square pads the same.
2020-07-01 16:57:00 +01:00
40a72d9530
Add SH_RECT handling to 3D shape conversion.
...
Also add some debugging for not-implemented shape cases in other
places to catch simmilar issues in future.
Fixes https://gitlab.com/kicad/code/kicad/issues/4757
2020-06-30 18:32:31 +01:00
42296d7eb9
fix issues in DRC and fill zone, related to recent changes in code.
...
Note also: the actual clearance between 2 pads when < minimal clearance
is incorrectly calculated.
2020-06-30 12:59:26 +02:00
0d4ee39f75
CHANGED: Copper zones can be on more than one layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1963
2020-06-28 08:52:37 -04:00
d01b29ab37
Cleanup pad geometry handling.
...
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.
This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
2020-06-22 22:28:37 +01:00
c57c21f577
Pad bounding radius is from pad centre, NOT shape centre.
2020-06-22 20:36:54 +01:00
7877e4083e
Don't match to an unknown layer.
2020-06-20 14:34:53 +01:00
32738862b8
Fix build error in linux
2020-06-18 09:52:04 -07:00
76d1b8bfa1
Make sure selectors match against user layer names.
...
Also allows for user specification of units in rule constraints.
2020-06-18 15:38:01 +01:00
a7703d1207
Cleanup Graphics to parallel Cleanup Tracks & Vias.
...
This also allows for easier migration to DRAWSEGMENT::S_RECTs by
auto-converting 4 rectilinear lines to a rectangle.
2020-06-17 18:44:39 +01:00
aeed8e6e2c
Finish implementation of DRAWSEGMENT::C_RECT.
...
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
2020-06-15 20:51:31 +01:00
d7d877241a
More explicit type conversion to attempt to fix GCC compile issue.
2020-06-10 13:41:45 +01:00
4138c8554c
Parse DRC rules when closing Board Setup dialog.
2020-06-10 12:03:37 +01:00
f4d8c30f9a
Tighten DRC epsilon value until we decide what to do about it.
2020-06-04 18:28:48 +01:00
36d197d8b6
Increase pad clearance test epsilon to polygonization max error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4604
2020-06-03 18:47:19 +01:00
d2cd4de280
Allow rules to operate on hole when hole-to-track testing.
2020-06-03 12:11:50 +01:00
6d5b6c8b81
A bit more refactoring to get code out of the DRC tool.
2020-05-29 22:06:48 +01:00
39ec63c4e9
Fix some inconsistencies in clearance priorities.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4555
2020-05-29 13:41:45 +01:00
9f2be3714f
Add unresolved variable testing for worksheet items.
2020-05-28 17:36:22 +01:00
e61185775f
Implement testCopperDrawItem() for POLYGON draw items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4549
2020-05-26 23:48:21 +01:00
1db799d841
Implement "disallow" rules and integrate with keepout settings.
2020-05-25 22:51:47 +01:00
c415130de9
Improve parse error messages.
2020-05-25 22:51:47 +01:00
160981ee71
Better error reporting for DRC rule parsing.
2020-05-25 22:51:47 +01:00
416d82727f
Redo DRC rules to get ready for new system.
2020-05-25 22:51:47 +01:00
9a08ee2778
Add a 1nm tolerance to prevent rotated pad roundoff errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4139
2020-05-22 18:04:29 +01:00
0a9adaef73
Don't use bboxes for non-cartesian-rotated pad collision testing.
2020-05-22 14:12:56 +01:00
69f121d907
Another attempt to get DRC and status bar to share message content.
2020-05-22 14:12:56 +01:00
4f14769ce1
Use both pads when calculating pad-to-pad clearance.
2020-05-21 21:26:36 +01:00
a5b53a623d
Update status bar with clearance & rule sources.
2020-05-21 21:26:30 +01:00
98be50883d
Fix bug in single-item layer matching.
2020-05-21 11:25:39 +01:00
89c46e6834
Fix typo in DRC check of rule-based track-width.
2020-05-19 21:17:49 +01:00
f4d7c323f5
Coverity fixes
2020-05-18 22:58:28 -04:00
7d537e83ea
Match layers only if both items are on the given layer.
2020-05-18 22:37:37 +01:00
ae9662c5cd
Fix some unitialized variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4477
Fixes https://gitlab.com/kicad/code/kicad/issues/4473
2020-05-18 21:30:38 +01:00
d046f165de
Fix board outline issues.
...
1) Don't try and do board-edge clearance checking against a
synthetic polygon constructed because we didn't find any edges.
2) Check pads against board edge.
3) Don't report vias as "Track too close to board edge".
2020-05-18 21:11:01 +01:00
cec857c0f4
Complete hookup of zone filler to new clearance engine.
2020-05-18 19:20:46 +01:00
05855a5a1c
Performance enhancements for DRC.
2020-05-18 13:38:17 +01:00
8dc6f8e82b
Allow empty rules files.
2020-05-17 15:49:02 +01:00
75b139c7b4
Move hole testing to DRC client and improve performance.
2020-05-17 15:49:02 +01:00
3656297f99
Add a simple editor for DRC rules.
2020-05-16 23:30:30 +01:00
5b07889347
Better error messages for rule parsing.
2020-05-16 20:53:49 +01:00
d3f017d825
DRC rules parser and engine.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2182
Fixes https://gitlab.com/kicad/code/kicad/issues/2116
Fixes https://gitlab.com/kicad/code/kicad/issues/1958
Fixes https://gitlab.com/kicad/code/kicad/issues/1965
2020-05-16 15:53:05 +01:00
13493437d0
Add hole-inside-courtyard DRC checks.
...
One for NPTH and one for PTH; both default to "ignore".
Fixes https://gitlab.com/kicad/code/kicad/issues/3434
2020-05-14 22:02:47 +01:00
aedc624340
Add DRC checks for dangling vias and tracks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1999
2020-05-14 22:02:47 +01:00
74ee143d45
Add via annulus minimum.
2020-05-11 22:56:09 +01:00
2568c168a2
Silence Coverity warning.
2020-05-09 14:14:38 +01:00
8efa8af8cc
Add persistence of DRC error severities.
2020-05-07 17:51:27 +01:00
0f8c7ffd11
Add pad keepout and footprint keepout areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2365
2020-05-07 17:51:27 +01:00
e0da677d4d
Add min clearance to DRC; rename Min Via Drill to Min Through Hole.
...
Also fixes a crash bug when ignoring a DRC violoation with multiple
markers.
Fixes https://gitlab.com/kicad/code/kicad/issues/2528
2020-05-04 22:08:36 +01:00
e39d145d72
Add DRC tests for minimum drill size (based on min via size).
2020-05-04 22:08:36 +01:00
fd991db0a9
Forgot last commit.
2020-05-01 21:10:36 +01:00
9954484dfd
Don't show source in violation "name".
2020-05-01 18:49:42 +01:00
058108dd6d
There are 3 courtyard DRC checks, not 2.
2020-05-01 18:49:42 +01:00
4a60b8a776
Improve DRC error reporting and fix some bugs.
2020-05-01 18:49:42 +01:00
068874a626
Add clearance source for zone-to-zone clearance violations.
2020-05-01 18:49:42 +01:00
bba2fa3028
Fix bug with doubling the pad corner radius twice.
2020-05-01 18:49:42 +01:00
dfe4a00d43
Add distance reporting for copper item DRC tests.
...
Also adds some performance improvements.
2020-05-01 18:49:42 +01:00
0c20c0b4af
Fix broken hole-to-track test.
2020-05-01 18:49:42 +01:00
874f13e29e
Fix some issues with rotated oval pads.
2020-05-01 18:49:42 +01:00
5c8d712a56
Fix some issues with rotated rectangular pads.
2020-05-01 18:49:42 +01:00
1280a4d2f3
Add pre-flighting to DRC checks for performance.
2020-05-01 18:49:42 +01:00
c955f45728
Fix compile error on gcc.
2020-05-01 18:49:42 +01:00
f7e518dbc6
Add clearance sources to some DRC violation reports.
2020-05-01 18:49:42 +01:00
a56191b658
Add distances to a bunch of DRC violation reports.
2020-05-01 18:49:42 +01:00
99dcadf7e6
Introduce new KI_FALLTHROUGH macro
...
Annotate purposeful fallthroughs in switch statements with the
KI_FALLTHROUGH macro.
2020-04-25 00:44:09 +01:00
32db9eb0f1
Add some distances to a few DRC errors.
2020-04-24 22:17:45 +01:00
3f9b3e505e
Add some virtual destructors
2020-04-24 18:24:39 +01:00
1535c83b88
Lay some groundwork for adding distances to DRC errors.
...
modified: eeschema/lib_rectangle.cpp
2020-04-24 14:46:22 +01:00
9c8941e040
Remove a bunch of globals.
2020-04-16 17:34:46 +01:00
6e800bddae
Rationalize penWidth processing as first step in removing some globals.
2020-04-13 20:58:13 +01:00
41b5872f12
Add ERC & DRC checks for unresolved variables.
2020-03-30 14:15:59 +01:00
64d217edda
drc.h: replace a list of #define by an enum.
...
Due to changes in code, the reason for using #define does not exist
since a long time.
2020-03-18 10:19:46 +01:00
cee973dc04
Move ERC error reporting over to the new framework.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-16 11:06:15 +00:00
61704cb508
Initialize missing variable
2020-03-11 15:24:08 -07:00
fbd01f2f7d
DRC_TREE_MODEL: Fix incorrect display of DRC errors on linux+wxGTK 3.0
...
Fixes #4038
https://gitlab.com/kicad/code/kicad/issues/4038
2020-03-11 10:46:08 +01:00
f079c41118
Prevent the board setup dialog from opening when DRC is open
...
The board setup dialog controls DRC error visibility, so the
two dialogs shouldn't be open at the same time to prevent
data contention.
Follow-up to https://gitlab.com/kicad/code/kicad/-/issues/4023
2020-03-08 15:55:14 +00:00
1e4ae5d526
Bug fix for DRC tree view on MSW.
2020-03-07 18:52:30 +00:00
44b8bb8f60
Fix a bug when deleting DRC markers from their child items.
2020-03-06 16:23:44 +00:00
d20f36511f
Fix issue with severities not get initialised in DRC_TREE_MODELs.
2020-03-04 21:52:30 +00:00
0894674869
Save severities settings in the DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3978
2020-03-04 21:52:30 +00:00
b7cd0c54c2
Fix compil issues, especially on Windows:
...
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
2020-03-04 10:48:18 +01:00
85c2e0d23a
Add user-defined severities, exclusions and colors to DRC markers.
...
Exclusions are currently persisted in the project file.
Fixes https://gitlab.com/kicad/code/kicad/issues/1989
2020-03-04 00:39:28 +00:00
3860ab9f0c
Fix issue returning pointers to items inside std::vector.
...
(When the vector is re-allocated your pointers become bogus.)
2020-02-27 22:00:51 +00:00
82ae9db262
Another variation on the wxDataViewCtrl issue....
2020-02-26 17:56:47 +00:00
a2234b348d
Another attempt to work around wxDataViewCtrl bug on GTK.
2020-02-26 17:35:10 +00:00
4c563b541e
Another attempt to get GTK wxDataViewCtrl to reload properly.
2020-02-26 14:41:12 +00:00
7c6f7e6b01
Try some undocumented wxWidgets call to fix DRC.
2020-02-25 18:26:42 +00:00
0614bbc663
Silence a couple of compiler warnings.
2020-02-25 18:26:42 +00:00
4e0cb3c1ad
Another attempt at fixing Linux issue.
...
Note that I have no Linux machine, so this is shooting in the dark....
2020-02-25 13:51:59 +00:00
4b380f0dc3
Fix compile issue on Linux & crash issue on Windows.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3937
2020-02-25 12:28:05 +00:00
a4837f7d32
Move DRC dialogs to wxDataView.
...
This allows for hierarchy and better selection handling.
2020-02-24 23:19:17 +00:00
c5077aeb97
Move weak-reference stuff to UUIDs.
2020-02-24 23:19:17 +00:00
625249322e
Pcbnew: regroup drc files to the already existing drc folder.
2020-02-19 10:31:32 +01:00
fbeb0709ef
Formatting cleanup.
2020-02-03 19:35:48 +00:00
7c28c3838a
Comment-only changes
...
Makes class comments conform to coding standards
2020-01-10 16:43:01 -08:00
11ff16be4e
Switch to scoped enums
2019-12-20 14:11:39 +00:00
c4d853c1e8
SHAPE_LINE_CHAIN: Remove element access
...
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
2019-12-12 13:54:48 +00:00
fbfbb64387
A bit of cleanup of stale DRC code.
2019-06-04 13:56:54 +01:00
568c8c336b
Move DRC control to a tool; move assorted commands to ACTIONS.
2019-06-03 21:08:30 +01:00
d1877d7c1b
Moving modules from DLIST to std::deque
2019-06-01 09:53:23 -07:00
40309a17ef
pcbnew: Check exact overlapping polygons
...
Checks for polygon collisions in the outline when the polygon contains
two or more segments that exactly overlap. This also places the DRC
marker at the location where the collision happens.
Fixes: lp:1818163
* https://bugs.launchpad.net/kicad/+bug/1818163
Fixes: lp:1818218
* https://bugs.launchpad.net/kicad/+bug/1818218
2019-03-01 09:38:33 -08:00
8297ab24e4
DRC: Break out courtyard overlap function
...
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
2019-01-23 13:27:52 -05:00
e6edc1b670
DRC: Make the marker factory a separate class
...
This separates the "newMarker" functions from the DRC class. These
are moved to a new class, DRC_MARKER_FACTORY, which is now responsible for
constructing suitable markers from BOARD_ITEMS.
The reasons for this are:
1) Allow DRC related functions to access theese functions without having
to bake these functions into the main DRC class.
2) Thereby simplify the DRC class interface
3) As DRC_MARKER is now a small class with public interfaces, it's
possible to put unit tests on these functions.
The motivation here is to allow to start to split out pieces of DRC
into separate classes.
2019-01-23 13:27:52 -05:00
Jeff Young
Seth Hillbrand
jean-pierre charras
Mark Roszko
Tomasz Wlostowski
Jon Evans
Ian McInerney
Seth Hillbrand
John Beard