The wire between two points should not be trimmed if it starts or ends
on one of the component's connection points.
(cherry picked from commit d2906f7975)
If the user is carefully selecting the zone edge, we do not filter the
zone preemptively from our disambiguation list in the same manner as we
do for selecting on zone copper.
Fixes: lp:1796719
* https://bugs.launchpad.net/kicad/+bug/1796719
(cherry picked from commit f11cb736e5)
The '/' and ':' are reserved and cannot be used in symbol or footprint
names. They will cause the LIB_ID parser and formatter to fail. While
it seems like they should be legal in symbol alias names, they will
trigger a symbol rescue the next time the schematic is loaded.
Use ID_SCH as in the Eagle schematic plugin rather than ID_ALIAS to
ensure symbol names do not need rescued the next time the schematic is
opened.
Remove ID_ALIAS since the rules for alias names are the same as the
rules for symbol names. Otherwise, allowing '/' and ':' in alias names
will force a symbol rescue on the next schematic load.
Fixes lp:1795600
https://bugs.launchpad.net/kicad/+bug/1795600
This fix draws a "sub bitmap" having a width multiple of 4.
(The loss of 1 to 3 pixels in horizontal size should be not really noticeable)
(cherry picked from commit 3a02e54411)
Deselection by clicking on a zone makes working with plane zones easier
by allowing the selected item to de-selected by clicking on a zone.
Once the selection is cleared, the zone may be re-selected as normal.
Clicking on non-zone items while a separate item is selected will still
select the new non-zone item without requiring a second click.
Allows selection of polygons and zones by their visible area. Will only
select polygons/filled areas when they are unobstructed by other
elements in the footprint/pcb. Also adds a "skip heuristics" modifier
key for clicking (ALT) that allows the full disambiguation list to be
displayed without removing less-likely elements. This dovetails the
zone/polygon selection as it allows selecting even when areas a fully
overlapped.
Fixes: lp:1753153
* https://bugs.launchpad.net/kicad/+bug/1753153
(cherry picked from commit 6a6d580a1c)
We want to keep at most 1 thread per 2 connectivity updates but we need
to force that floor to be at least 1 for when there is only 1
connectivity update.
Fixes: lp:1795245
* https://bugs.launchpad.net/kicad/+bug/1795245
(cherry picked from commit 89a3d2b451)
SEGZONEs are no longer created by pcbnew but may exist in older boards.
This allows deleting the old fills in a manner similar to the deletion
in Legacy canvas.
Fixes: lp:1794571
* https://bugs.launchpad.net/kicad/+bug/1794571
(cherry picked from commit ef6f7e96f3)
SEGZONE types were confusingly named PCB_ZONE_T. Zones in pcbnew are
now _only_ PCB_ZONE_AREA_T, so we name segzone types PCB_SEGZONE_T to be
clear.
This also removes processing of the SEGZONEs from connectivity
calculations.
(cherry picked from commit b3a5e08c2f)
This is caused by:
* Not checking the hotkey data is not null when performing a
hotkey action
* Allowing hotkey actions on non-hotkey rows.
This fixes both of these, and adds an assert to warn if someone
does manage to fire a hotkey action on a non-hotkey row (but it
won't crash).
This is a ported version of commit 704615721 on the master branch.
Fixes: lp:1794756
* https://bugs.launchpad.net/kicad/+bug/1794756
m_dragstatus is set to true when a valid route is created given the
user's constraints. We need to check this before committing the route
to the board.
Fixes: lp:1794810
* https://bugs.launchpad.net/kicad/+bug/1794810
(cherry picked from commit 317ca8e64d)
Deselecting each individually had the side-effect of possibly re-drawing
the view in between actions, leading to visible artifacts in the router
(where invisible items are set visible before committing a change)
(cherry-picked from commit 491098af35)
(cherry picked from commit 65678b223a)
Commit efdbc91e42 broken the primary
alignment mechanism for maintaining the current point as an auxilliary
grid reference. This reverts that commit and fixes both the initial
issue and the associated bug by applying the primary constraint after
the secondary. In this way, we consider the secondary constraint as an
additive rather than alternative constraint.
Fixes: lp:1793888
* https://bugs.launchpad.net/kicad/+bug/1793888
(cherry picked from commit edde02481e)
Change "OK" to "Export" so user is not surprised by the fact that the
dialog does not close after the step file is created..
Fixes lp:1784260
https://bugs.launchpad.net/kicad/+bug/1784260
Somewhere during v5 rc cycle, the trimming of wires laid over simple
components was removed. The wires were still removed as soon as the
user moved the component again. This corrects the first behavior to
intended action for simple components.
Fixes: lp:1794019
* https://bugs.launchpad.net/kicad/+bug/1794019
This is a boyscouting commit to standardize the threading of zone fills.
We do not need to join threads after their completion, instead we simply
allow them to clean up their memory without blocking the user. This
also sets the maximum number of threads that may be created to the
number of zones being filled. More than this will only leave un-used
threads being created and immediately killed.
We also include the connectivity search as a phase in the fill progress
reporter. This was the case before but did not utilize the correct
maxsize, leading to stalled progress bar.
(cherry picked from commit 969e85daa3)
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
(cherry picked from commit f8784f30a8)
When editing the pcb, Ctrl-Click will highlight a net. This allows
de-highlight with the ESC/cancel action from the selection tool. Inside
the highlight tool, ESC reverts to the selection tool while keeping the
net highlighted.
Fixes: lp:1793842
* https://bugs.launchpad.net/kicad/+bug/1793842
(cherry picked from commit 518b53f78c)
Reset lock file when saving a schematic sheet to a different file name.
This prevents a file is already open error from being displayed when
opening the original file.
Fixes lp:1788507
https://bugs.launchpad.net/kicad/+bug/1788507
Clang++ seems to be in left-field here as it processes a stringstream
1.0X1.0 >> double as a hexadecimal floating point ('X' character) and
throws an error rather than converting 1.0 and stopping when it reaches
a non-numeric character. This causes errors when exporting step on Mac,
which uses clang++ by default.
Adding spaces to the string is more explicit and doesn't break gcc. It
will be sufficient until we get rid of kicad2step as an external
utility.
Fixes: lp:1778564
* https://bugs.launchpad.net/kicad/+bug/1778564
The lock file code would reset the lock file every other time the same
board file was opened in Pcbnew in the stand alone mode. This created
the perfect toggle switch causing the board to be reloaded every other
time the same board was selected.
Fixes lp:1777599
https://bugs.launchpad.net/kicad/+bug/1777599
OpenMP is not available for macos, so moving to a std::threads
implementation brings platforms into shared code.
This also reduces the OpenMP overhead when computing connectivity and
ratsnests.
Fixes: lp:1780130
* https://bugs.launchpad.net/kicad/+bug/1780130
(cherry picked from commit c0f067bf90)
The CMake scripts calculate the install path for python scripts by
distutils.sysconfig.get_python_lib(
plat_specific=0,
standard_lib=0,
prefix=''
)
which generates a string in line with
lib/python2.7/site-packages
This string ends up in the CMake variable PYTHON_DEST and is used by the
install step as destination directory for pcbnew.py.
There has been a hard-coded assumption on the content of that string in
PcbNew which is not compatible with FreeBSD 11.1.
This commit eliminates the hard-coded assumption in PcbNew and reuses
the install path as known by CMake.
Fixes: lp:1777921
* https://bugs.launchpad.net/kicad/+bug/1777921
Commit 73c229714 was a bit of a sledgehammer for the associated problem
of degenerate points. This commit replaces that one by only performing
additional simplification of the zone polygons on those polygons that
fail our initial triangulation attempt.
(cherry picked from commit 3ebba6cbe1)