0ab583cf72
Special-case clearances of NPTH pads with no copper on layer.
...
These should get the hole clearance, not the copper clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/4017
2020-10-07 16:31:55 +01:00
4565631728
Finish moving eeschema assigned netclasses to sheet-path-relative.
...
Also adds code for the case where a new label is created on a net
with an existing netclass assignment.
Fixes https://gitlab.com/kicad/code/kicad/issues/5886
2020-10-07 16:31:55 +01:00
cfc636d25f
Minor adjustments to DRC syntax help.
2020-10-07 16:31:55 +01:00
eb8287ded8
router: bring back legacy GetEffectivePolygon() for complex pad shapes (more info in comments)
2020-10-07 16:36:37 +02:00
8a7fc7e970
drc: more robust segment pair detection, still issues with approximated arc corners though...
2020-10-07 16:36:37 +02:00
719363fa4a
Factor out class MINOPTMAX<> into a separate header
2020-10-07 16:36:37 +02:00
c3da54b741
Allow editing properties of locked pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5861
2020-10-06 17:54:50 -04:00
42496a7d62
Convert DRC rules syntax help to markdown
...
Note, the original markdown spec specifies using 4 spaces to indent a
code block (https://daringfireball.net/projects/markdown/syntax )
Wrapping with three backticks doesn't work with this lib. Wrapping
with a single backtick for span elements works ok.
2020-10-06 17:18:35 +00:00
7c46cb0a05
Make GetCenter() return the boundingbox center by default.
...
Leaves pads and markers returning the position.
Fixes https://gitlab.com/kicad/code/kicad/issues/1924
2020-10-06 18:00:18 +01:00
f620f8bdd3
Report silk/edge collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5854
2020-10-06 13:20:52 +01:00
ee95d8fe2e
Improve SNR in status bar (and use common code).
2020-10-06 12:08:31 +01:00
305fe54971
Drawing tool needs to pass resetLocalCoords event after recording it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5879
2020-10-06 12:08:31 +01:00
00baaaa831
Add substrateMaterial FR408-HR
...
https://docs.oshpark.com/resources/four-layer-substrate-FR408HR.pdf
2020-10-06 10:31:00 +00:00
728c207105
Deduplicate settings migration handling
2020-10-05 23:21:57 -04:00
d23d5510e7
Restore a side-effect that the router appears to depend on.
2020-10-06 00:07:34 +01:00
35fa857fd8
Make sure router tool passes events it doesn't handle.
...
Fixes undo/redo when router tool is active but not routing.
2020-10-05 23:16:37 +01:00
18a3c4c1db
Fix some fairly catastrophic bugs in shape collision optimization.
...
I did a little too much copy & paste last time around....
2020-10-05 22:32:07 +01:00
6d50c9749c
Mark the colliding shape so we know which one to highlight.
...
Also checks the nets when checking for a pad being flashed on a particular
layer (so we don't end up thinking the currently-routing-collided track
is a connection).
2020-10-05 22:32:07 +01:00
8f870e87d6
Flip default for KeepTopBottom in parser.
...
File only has a token if it's set to true.
2020-10-05 22:32:07 +01:00
bb5d393917
Respect "keep top/bottom" setting when checking pad layer.
2020-10-05 22:32:07 +01:00
d063c56971
Move PNS pad solids to COMPOUND_SHAPE.
...
Also fixes plated holes solids to include plating thickness.
2020-10-05 22:32:07 +01:00
0751965b2b
Be more responsive to user cancel.
2020-10-05 22:31:52 +01:00
43c14face0
Switch to showing metric/imperial units in comboboxes and menus
...
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
2020-10-05 20:26:33 +01:00
27f3ac980f
Fix broken Python builds.
2020-10-05 10:52:51 -04:00
1416280662
Cleanup: Move Eagle files into plugins folder
2020-10-05 14:19:07 +00:00
5705859e9e
Remove accidental debug code.
2020-10-05 12:27:21 +01:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
a28a0e14ba
Fix conversion warnings
2020-10-05 10:41:14 +00:00
49f0d80f14
gen_footprints_placefile: fix unit selection not stored in config.
...
Fixes #5884
https://gitlab.com/kicad/code/kicad/issues/5884
2020-10-05 10:50:40 +02:00
0eaf7bfd1f
Ensure visible layers are synchronized properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5873
2020-10-04 16:55:22 -04:00
8b0fb9f4cf
Remove units and polar settings from the preferences panels
...
These options are already available in menus, toolbars and hotkeys,
so having them in the preferences pane is more trouble than it is
worth.
2020-10-04 17:53:55 +01:00
3a570c27f0
Update unit handling in the preview ruler
...
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
2020-10-04 17:53:55 +01:00
5828416960
Simplify area printing in the board statistics dialog
...
Store the board area in IU, and then convert it to the user
units on display using the common unit printing functions.
2020-10-04 17:53:55 +01:00
122bd7ca7c
Make the statubar aware of mils units
...
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
2020-10-04 17:53:55 +01:00
ad29a2f3b4
Update more places to properly display mils
2020-10-04 17:53:55 +01:00
b1bd1f2a97
Introduce new action to switch to mils as a unit
2020-10-04 17:53:55 +01:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
8e515d0069
Standardize default hotkey refresh
2020-10-04 05:48:26 -07:00
85c6cebd77
Rework silk-to-pad checker to handle all solder mask clipping of silk.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5851
2020-10-04 13:21:01 +01:00
36ceb8075e
Fix logic bug in DRC RTree handler.
...
Return value from visitor is whether or not to keep searching, not
whether or not there was a collision.
2020-10-04 13:21:01 +01:00
4702e279b9
A DRAWSEGMENT can be stroked *and* filled.
...
Make sure its effective shape reflects that. Note also that the
strokes need to have the correct width.
2020-10-04 13:21:01 +01:00
ba8b8d2738
Fix incorrect vertical position of some ckeckboxes in some wxGrid used in dialogs
2020-10-04 10:34:31 +02:00
9e115a548e
Add advance config variable to skip bounding box loading on footprints
2020-10-03 22:01:42 +00:00
bb753aaadf
Clean up terminology around active & high contrast layers.
2020-10-03 22:55:34 +01:00
44580acee2
Clean up some compiler warnings.
2020-10-03 22:55:34 +01:00
d14761bee6
Fix inches being sometimes used instead of mils
2020-10-03 20:06:56 +00:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
b69d396afc
Turn the toolbar context menus into unique_ptr for easier management
2020-10-03 19:09:18 +01:00
81154c9270
Back out check-for-mouse-in-selection-bbox for PCBNew.
...
Unlike eeschema, PCBNew has had a selection model for two major
releases so folks have gotten used to RMB acting on the selection
rather than what's under the mouse.
Plus it makes RMB after a drag-select nearly useless as your mouse
by definition ends up outside the selection bbox.
Fixes https://gitlab.com/kicad/code/kicad/issues/5857
2020-10-03 18:50:49 +01:00
3144bab36f
final cleanup about removing useless include
2020-10-03 16:40:36 +02:00
0b23cb7dbb
more cleanup about removing useless include
2020-10-03 15:26:03 +02:00
bea5914726
Make sure all DRC paths check for via/pad being flashed on layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5830
2020-10-03 14:20:19 +01:00
8eb8d967d7
Show correct clearance lines for pads & vias not flashed on cur layer.
2020-10-03 14:19:33 +01:00
ba26e056ec
Implement groups for modedit.
...
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
2020-10-03 12:19:50 +01:00
e76736b7bf
Fix a few Coverity warnings
2020-10-03 12:47:41 +02:00
b38cef409b
Rename CopyFile() to KiCopyFile() to avoid name colliding with a windows header.
...
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
2020-10-03 10:08:21 +02:00
8c783687a9
pcbnew: Add "All supported formats" drop-down to the "Import Non Kicad Board" file dialog
2020-10-03 02:19:13 +00:00
716598ac24
Layout tweaks to CADSTAR layer mapping dialog
2020-10-02 22:17:08 -04:00
72d9a36fd6
ADDED: Dialog to handle import of unmatched layers from CADSTAR
2020-10-03 01:21:57 +00:00
45d7f2b6f5
Expose via holes to color theme properly
2020-10-02 21:12:59 -04:00
a25d091b6c
Add Convert Shapes tool to footprint editor
2020-10-02 18:42:41 -04:00
4c5db9681c
Naming conventions.
2020-10-02 21:25:14 +01:00
cc617b715f
Implement hypertext links for intersheet references.
2020-10-02 21:18:34 +01:00
5ef1dc17ad
drc: ignore silk2pad/silk2silk violations for hidden text objects
2020-10-02 21:06:52 +02:00
ca8aca6faa
drc: implement DRC_RTREE::CheckColliding
2020-10-02 21:06:52 +02:00
87a220b8e2
more cleanup about removing useless include
2020-10-02 14:51:11 +02:00
732f588d83
Don't hit-test groups; allow only selection promotions from members.
...
Also fixes some bugs were the selection filters weren't getting
applied correctly on drag-selects.
Fixes https://gitlab.com/kicad/code/kicad/issues/5668
Fixes https://gitlab.com/kicad/code/kicad/issues/5804
2020-10-02 13:50:16 +01:00
13304d0870
more cleanup about removing useless include
2020-10-02 13:40:00 +02:00
0cca2a0ad2
Rect, Round Rect, Oval, Trapezoid (rotated) pads now use flashed apertures.
...
Complex shapes are plot using regions.
The old code is still available, just in case...
2020-10-02 10:19:45 +02:00
8285110c2a
more cleanup about removing useless include
2020-10-02 08:58:19 +02:00
60046a1bcc
Dynamically scale cross-probe zooming
...
CHANGED: When doing cross-probe zooming, KiCad zooms the selected
component to fill the screen. This makes it hard to understand the
part in context so users would have to always zoom out manually. This
commit uses the default text height in Eeschema and Pcbnew as a
constant to compare the height of selected parts or components against.
This lets the code determine how big the part is and scale the zoom
wider accordingly. Big parts get less scaling and small part get more.
NOTE: There is a little bit of debug code present. There are #ifdefs
to let developers easily swap in the original KiCad zoom for comparison.
There is also a bool added that can force each program to always perform
the new calculated zoom since KiCad ignores zooms that are close to the
current value. This debug code can be removed later as desired.
2020-10-02 00:56:52 +00:00
daac95400f
Make sure new DRC_ENGINE is initialized.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5824
2020-10-01 23:44:52 +01:00
b369506697
Don't test forbidden footprint layers in board editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5847
2020-10-01 18:34:17 -04:00
71ed7ee707
Revert "Drag preselected items even when "prefer selection to dragging" enabled"
...
This reverts commit d530e2c2cd
2020-10-01 18:23:30 -04:00
803f53d6b2
Don't reload DRC lists on activate event.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5701
2020-10-01 22:45:54 +01:00
ff463842a8
Fix memory management with DIMENSION shapes
...
The previous way leaked the temporary SHAPE that was used
to construct the shared_ptr. Also, emplace_back shouldn't
be used with make_shared - since we already have the shared_ptr
and emplace_back will try to construct a new one.
2020-10-01 20:11:35 +01:00
481026e901
Move microwave tools into a group on the main drawing toolbar
...
ADDED: Drawing group for microwave tools on main drawing toolbar
REMVOED: Microwave toolbar no longer exists
2020-10-01 19:47:55 +01:00
8eb9d34aad
drc: silk to silk clerance test should not report errors for hidden text
2020-10-01 18:55:53 +02:00
aee16efe32
drc: LVS test should not throw an error if running in no-project mode
2020-10-01 18:55:53 +02:00
9b470b6c09
EDA_TEXT: Use actual draw rotation angle to generate the effective shape.
...
Fixes : #5814
2020-10-01 18:55:53 +02:00
35e129ed47
Minor code cleanup, step3: remove more useless include.
2020-10-01 18:28:12 +02:00
f702da95c7
Minor code cleanup, step2: remove more useless include.
...
fix also a minor compil warning
2020-10-01 15:39:47 +02:00
42350a4928
Minor code cleanup: remove useless include or useless code.
...
fix also a minor compil warning
2020-10-01 11:36:15 +02:00
d530e2c2cd
Drag preselected items even when "prefer selection to dragging" enabled
...
Not being able to drag an already-selected item feels broken
2020-09-30 20:10:13 -07:00
4dda3a1715
Don't allow editing design rules without a project
...
Also fix a crash initializing DRC engine on an empty board
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5835
2020-09-30 19:12:26 -04:00
8fad4bb34c
Remove ratsnest visibility from PcbNew preferences
...
Ratsnest visibility is a quick toggle, not a preference
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5261
2020-09-30 19:12:26 -04:00
6f54a9982c
Remove PCB_LAYER_WIDGET
2020-09-30 19:12:26 -04:00
e7c31f5dba
Fix build error due to variable renaming
2020-09-30 23:42:56 +01:00
a5ed5e5675
Handle single line segments on footprint edgecuts
...
Also, only display an infobar message for footprints when
there is no footprint loaded (instead of if the outline
isn't closed).
Fixes https://gitlab.com/kicad/code/kicad/issues/4866
2020-09-30 23:34:04 +01:00
37eed564ab
Process all drawsegments on the outline layer
2020-09-30 23:34:04 +01:00
0ac2803624
Create footprint edgecuts differently than the board edge cuts
2020-09-30 23:34:04 +01:00
78c43158f4
Annotate the board class with if it is for a footprint edit/view
2020-09-30 23:34:04 +01:00
4165ae6df1
Make zero-stripping sensitive to locale separator.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5813
2020-09-30 23:27:03 +01:00
6abe68fff0
Cleanup. No changes to execution.
2020-09-30 23:07:12 +01:00
7c003f98d5
ADDED: Appearance panel for footprint editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5643
2020-09-30 17:46:58 -04:00
3f8c9d49f8
Revert "Code cleanup: remove useless wx/wx.h include inside a few files."
...
due to compil issue on Linux
This reverts commit cffccc3970
2020-09-30 20:47:20 +02:00
cffccc3970
Code cleanup: remove useless wx/wx.h include inside a few files.
...
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
2020-09-30 20:03:27 +02:00
12a30c43de
Fix missing refactor
2020-09-30 08:42:58 -07:00
bf3cb0b1d0
Standardize pad type enums
2020-09-30 08:38:35 -07:00
673b52b5c4
Non-copper zones need a different trim-outside-board strategy.
...
The copper zones are checking for any point being outside the board
as they will have already been broken in to islands either entirely
outside or entirely inside the board. Not so for non-copper zones.
However, non-copper zones are *already* trimmed to the board edges,
so we just need to avoid using the above faulty assumption.
Fixes https://gitlab.com/kicad/code/kicad/issues/5811
2020-09-30 11:50:51 +01:00
d3f8f2b81e
Remove confusion between pad->IsOnLayer and pad->IsPadOnLayer
2020-09-30 11:50:51 +01:00
31549cdc10
Clean up some things about pad locking
...
Allow selecting pads on a locked footprint (but not editing)
Don't create point editor for pads that should be locked
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5829
2020-09-29 18:53:49 -04:00
ab033327c7
Limit checks need to be done at start, not end.
...
(We also use the limit checks to ignore violations.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5831
2020-09-29 21:23:26 +01:00
2cf303bb09
Test against pad hole cylinder when pad is not on layer.
2020-09-29 18:18:19 +01:00
95f12d0826
Add some missing includes.
2020-09-29 16:32:44 +01:00
d0773cbe89
Be more careful with iterators when deleting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5811
2020-09-29 14:11:32 +01:00
66454ec895
Don't do hole-to-pad clearance testing on compound pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5822
2020-09-29 14:11:32 +01:00
d70f812255
Fix some initialisation issues in the Python framework.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5824
2020-09-29 14:11:32 +01:00
4bb3e9dd98
Better handling of rounded pad shapes in GRID_HELPER
2020-09-28 23:59:44 -04:00
30663c293c
GRID_HELPER: allow snapping to collinear points
2020-09-28 21:38:08 -04:00
fe0f6b5ac7
ADDED: snapping to pad shape endpoints and midpoints
...
ADDED: snapping to rectangle midpoints
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4749
2020-09-28 21:38:08 -04:00
e4ca4a2a47
REMOVED: "Delete twice to delete locked" action
...
Now that it is possible to disable selection of locked
items, it is better to just prevent accidental editing
of locked items
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5793
2020-09-28 21:38:08 -04:00
74b0e1fa47
Break apart locked items from the rest of the selection filter
...
Disable selection of locked items by default
See discussion in https://gitlab.com/kicad/code/kicad/-/issues/5793
2020-09-28 21:38:08 -04:00
8dfb5b5640
Go back to separate intermediate and final corner strategies.
...
While we can *almost* get away with only chamfering/rouding acute
corners, some ugly edge cases turn up.
Fixes https://gitlab.com/kicad/code/kicad/issues/5581
2020-09-29 00:51:36 +01:00
bf67648562
Support optional location reporting in SHAPE collisions.
...
Also fixes a few bugs in the collision routines.
2020-09-28 23:28:33 +01:00
39d2a46b30
Avoid Pcbnew crash when double clicking in DIALOG_DRC on a error item.
2020-09-28 21:07:51 +02:00
c21883c8c9
fix minor I18n issues.
2020-09-28 20:52:55 +02:00
258d1a1971
Pcb: Get proper "Break Track" location when invoked from RMB context menu
...
When invoking "Break Track" from the RMB context menu, Pcbnew
gets and uses the current position of the mouse to figure out where to
break the track. The problem is that the mouse has to be moved to select
the "Break Track" menu item, and the mouse position used is wrong. This
can result in the break in the wrong location or not happening at all.
CHANGED: This commit determines if the "Break Track" was invoked from a
context menu or a hotkey. If a hotkey, it uses the current mosue position.
If a context menu, it uses the original postion of the mouse when the menu
was opened.
2020-09-28 16:56:02 +00:00
456112de03
Request redraw of 3D-Viewer when moving a footprint
2020-09-28 02:26:25 +00:00
5a362dfeeb
Request redraw of 3D-Viewer when a selection from Schematic is made
2020-09-28 02:26:25 +00:00
a1e94c2583
3D-Viewer: request a redraw when a footprint is selected in pcbnew
2020-09-28 02:26:25 +00:00
72b904a978
ADDED: CADSTAR Archive project importer
2020-09-27 23:50:20 +00:00
39995341d9
Compile fixes
...
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
2020-09-27 22:05:07 +00:00
db1d3ea710
Update track, via and pad clearances for the current layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5797
2020-09-27 21:33:37 +01:00
09ab269770
Support for 'L' in DRC expression language.
...
Also make layer testing work again against both canonical names and
user names.
2020-09-27 21:33:37 +01:00
a2d9acb647
Rename DRC rule function onLayer to existsOnLayer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5647
2020-09-27 21:33:37 +01:00
6f5f6a0fba
CADSTAR Schematic / PCB Archive Importers: Fix string formatting asserts
2020-09-27 18:14:02 +01:00
93242eb3ad
CADSTAR Schematic / PCB Archive Importers: Add missing import warnings and fix code formatting
2020-09-27 18:14:01 +01:00
2d99703e28
CADSTAR Schematic Archive Importer: Load all Sheets and Hierarchical Blocks
2020-09-27 18:13:58 +01:00
646a733556
CADSTAR Schematic Archive Importer: Parse all elements
2020-09-27 18:13:57 +01:00
1b20a2910a
Move all common CADSTAR Importer Parser code
...
Move all common code from CADSTAR_PCB_ARCHIVE_PARSER (pcbnew) to CADSTAR_ARCHIVE_PARSER (common)
2020-09-27 18:13:56 +01:00
c5c6b97c8b
drc: fixed warnings in length matcher
2020-09-27 17:51:16 +02:00
fbb669aa75
drc: diff pair test provider reports gap & max uncoupled length violations.
2020-09-27 17:50:57 +02:00
8e9a39e17c
drc: fix incorrect DRCE_LAST
2020-09-27 17:50:24 +02:00
3cca2ace44
pcbnew: fix warnings in FROM_TO_CACHE
2020-09-27 17:49:54 +02:00
5874373a0c
drc: unfinished version of diff pair gap/coupled length test
2020-09-27 16:45:46 +02:00
9b4504e73f
drc: report from-to paths for length matched signals
2020-09-27 16:45:46 +02:00
adf7d3260d
drc: parse diff pair constranits
2020-09-27 16:45:46 +02:00
cb2dfcde83
drc: error codes for diff-pair related stuff
2020-09-27 16:45:46 +02:00
3654e7b795
pcbnew: add QueryFromToPath() method to FROM_TO_CACHE
2020-09-27 16:45:46 +02:00
bd0bd5b84b
drc: support for skew & via_count constraints. Length test now generates a length report
2020-09-27 16:45:46 +02:00
f38147c201
drc: add support for via_count constraint to the parser
2020-09-27 16:45:46 +02:00
7b7c3bde88
pcb_new: CONNECTIVITY_DATA now keeps a cache of DRC from-tos
2020-09-27 16:45:46 +02:00
bc7369d70c
pcbnew: include silk2silk and length/skew DRC tests in the makefile
2020-09-27 16:45:46 +02:00
8d206a9ef0
PCB_EXPR_EVALUATOR: added fromTo() method
2020-09-27 16:45:46 +02:00
2258c861c9
drc: initial version of matched trace lengths test provider
2020-09-27 16:45:46 +02:00
2bacfe8202
drc: use R-Tree intersection for silk clearance tests
2020-09-27 16:45:46 +02:00
b215361b30
drc: default constraints for silk2pad, silk2silk
2020-09-27 16:45:46 +02:00
26e7dc6e14
drc: added length/skew constraint types
2020-09-27 16:45:46 +02:00
abe354773f
drc: initial version of tree intersection (QueryCollidingPairs)
2020-09-27 16:45:46 +02:00
Jeff Young
Tomasz Wlostowski
Jon Evans
Michael Kavanagh
Benjamin Vernoux
Ian McInerney
Wayne Stambaugh
Mark Roszko
jean-pierre charras
Seth Hillbrand
Mikolaj Wielgus
Roberto Fernandez Bautista
Peter Montgomery
PJM
Mario Luzeiro