c85590a470
Correct is-inside logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13259
2022-12-27 14:34:35 +00:00
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
5eb3f5d3e7
Use correct translation macro for group names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13277
2022-12-26 20:11:20 -05:00
dee5357d4d
Properties: give focus back to canvas after committing changes
...
Only needed on MSW, but safe to enable everywhere I think
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13275
2022-12-26 16:46:03 -05:00
ab6aa08f33
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13263
2022-12-26 20:33:04 +00:00
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
f214f6f44c
Temporarily work around buggy zone refresh behavior
...
The actual problem is that EVENTS::SelectedItemsModified (via EDA_DRAW_FRAME::UpdateMsgPanel) is being called on every OnModify call, where it really should only be called if the *selected* items are modified. This problem will take longer to fix.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13279
2022-12-26 14:04:53 -05:00
eb5a831a99
Fix typo.
2022-12-26 14:11:46 +00:00
0094a0fc15
Treat teardrops as tracks not zones for disallow constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13264
2022-12-26 11:33:09 +00:00
fbaf4af489
Properties: Allow dynamic update of read-only state
2022-12-25 20:35:44 -05:00
b85fab9ab6
Support DXF ellipses and elliptical arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12563
2022-12-24 22:46:07 -05:00
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
34e134c5e5
Don't allow clearanceEpsilon to force clearance < 0.
...
Also, a plated hole has the max clearance of hole_clearance and
copper_clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/13237
2022-12-24 12:56:41 +00:00
020f8f61db
Let's try fixing the doxygen-python again
2022-12-23 23:11:04 -05:00
59f0e428fa
Fix a PnS router issue doesn't respect knockout texts.
...
Fixes #13251
https://gitlab.com/kicad/code/kicad/issues/13251
2022-12-23 18:17:44 +01:00
eef47c2a79
DRC: ensure tracks are tested against holes, even if hole clearance is set to 0.
...
Even with clearance = 0, copper to hole must be tested because it cannot be
inside the hole
2022-12-23 14:06:10 +01:00
e152cf0a92
Undo one doxygen-python build change, remains broken
2022-12-22 21:35:21 -05:00
e19fb101ef
Properties: Show basic marker props
2022-12-22 17:45:16 -05:00
18788b03eb
Properties: Hide unsupported hyperlink property
2022-12-22 17:45:16 -05:00
2b4cafe9f7
Properties: Fixes for arc tracks
2022-12-22 17:45:16 -05:00
4a0588db7a
Properties: translation fixes
2022-12-22 17:45:16 -05:00
cc2b107649
Footprint Viewer: resolve canvas type after menus are created
...
SaveSettings can't be called until the menus are in place
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13243
2022-12-22 12:14:55 -05:00
8bfec30761
Fix the pcbnew.py dependency causing the doxygen to fail
...
The doxygen-python target recreates pcbnew.py that got deleted by xml-to-docstrings
2022-12-21 23:49:23 -05:00
caeb579174
Fix the dependencies for the python doxygen build
...
DEPENDS was being used for targets which is invalid for add_custom_target...as confusing as that is.
It is files only.
2022-12-21 23:39:35 -05:00
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
1590e48ec1
Use translated strings for property display
2022-12-21 18:03:15 -05:00
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
e28f6ecc00
Fetch a better location for keepout area collsions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13220
2022-12-21 18:22:15 +00:00
e8f755c665
router: Match segment endpoint calculation between dragger and the tool.
...
Prevents always picking point A when dragging short segments.
2022-12-21 20:55:49 +03:00
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
b0cbab5c4b
Footprint Editor: Focus search field when window is first opened
...
The search field on the Symbol Editor is focused when its window
is first opened. Similar behavior has been implemented in the search
field of the Footprint Editor with this change.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13100
2022-12-20 19:54:02 +00:00
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
161a1e21f5
PnS router: NPTH can be on copper layers, depending of the pad size and the hole size.
...
Now: round NPTH with a round hole bigger than the pad are not on a copper layer.
Other pas shapes are seen on copper layers (far from ideal, but reasonable)
Fixes #13214
https://gitlab.com/kicad/code/kicad/issues/13214
2022-12-20 12:50:22 +01:00
f601c87cea
Export UNITS_PROVIDE into SWIG
2022-12-19 17:30:37 +00:00
abff7975f1
Python scripting: fix some issues when trying to create a DRC Report:
...
- avoid aborting the DRC report on a .dru issue without any error message.
- ensure the list of layer names is up to date (contains both canonical
and user layers names, that can be used in DRC tests.
Fixes #11410
https://gitlab.com/kicad/code/kicad/issues/11410
2022-12-19 12:39:20 +01:00
6c73fe05e9
python scripting: better fix for commit 5a79821 (fix crash due to a null pointer):
...
Try to use a better error message for severity.
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-18 18:31:19 +01:00
639626fda4
Include the proper header instead of the entire lockfile function
2022-12-17 23:37:24 +00:00
82a11c71af
Clean up extra control creator logic in pcbnew save file dialog
2022-12-17 23:37:24 +00:00
5abf73e3c9
Never call ReCreateMenuBar inside a menu event handler
...
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
2022-12-16 16:37:51 -05:00
90fb315113
Add missing text alignment types to SWIG export
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13174
2022-12-16 18:55:21 +00:00
e699c25d98
Add operators for the SWIG wrapper of EDA_ANGLE
2022-12-16 18:55:21 +00:00
66c2462c7e
Eliminate angle as double in SWIG wrapper
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13171
2022-12-16 18:55:21 +00:00
66e9d5c61c
Return reference rather than copy
...
No need to return a const copy by default in GetItems(). The const
reference will be faster. Thanks to @GyrosGeier for the suggestion
2022-12-16 10:52:57 -08:00
12ea3e0822
Fix wxWidgets crankiness.
2022-12-16 00:53:53 +00:00
7750d2e00e
Microvias always use separate uvia netclass properties.
...
There is no current microvia size/drill.
Fixes https://gitlab.com/kicad/code/kicad/issues/13176
2022-12-16 00:10:03 +00:00
b5cb9eccbf
Generate dependency files from Swig
...
The wrapper is only rebuilt if one of the files that were parsed during
generation has changed.
2022-12-15 23:42:07 +00:00
e91c039ed3
Prevent event stackup when init pages
...
The paged book initialization (and others) can generate events,
re-laying out the whole dialog multiple times during initialization.
This halts events during the layout period
Fixes https://gitlab.com/kicad/code/kicad/issues/13158
2022-12-15 11:39:03 -08:00
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
366cad1f01
Uniformly translate "<no net>" message.
2022-12-15 13:59:25 +00:00
5a7982161d
python scripting: fix crash due to a null pointer use.
...
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-15 14:27:29 +01:00
034981ff9d
Add tooltip to add existing library button in pcbnew
2022-12-15 02:08:41 +00:00
93879532f7
More wxTextCtrl minimum widths.
2022-12-14 23:23:41 +00:00
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
19a5a3ae16
Remove unused member variable.
2022-12-14 13:36:28 +00:00
2f8cc84551
Hotglue footprint to svg export
...
This needs additional work
2022-12-13 22:50:15 -05:00
eb10d7d1d8
PCB Search: fix untranslated string
2022-12-13 16:35:15 -05:00
5652eaea82
Search Pane: name net 0 as "No Net" with no class
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13148
2022-12-13 15:52:07 -05:00
c0872364d4
Get rid of bloated bitmap buttons on wxWidgets 3.2.
2022-12-13 20:48:02 +00:00
88038907fa
Pcbnew, graphic importer: do not import 0 length segments and smaller than 20 nm Bezier curves.
...
Degenerated Bezier curves (i.e. straight lines) are imported as segments.
They create issues in kicad because they are hard to edit and manage.
2022-12-13 20:23:40 +01:00
d3228dbab2
Differentiate search panel font between Mac and others.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13145
2022-12-13 00:47:19 +00:00
f24372bc18
Layout adjustments for wxWidgets 3.2.
2022-12-13 00:47:19 +00:00
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
2fd500e20b
Respect the "report all errors" checkbox
...
When we have objects spanning multiple layers, the user doesn't need to
see every layer/hole combination violation if they do not request it
(cherry picked from commit c07043e762
2022-12-12 11:14:38 -08:00
6d73d9a08e
Split another couple of hairs in the never-ending "how big is a font".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13009
Fixes https://gitlab.com/kicad/code/kicad/issues/13115
2022-12-12 17:37:17 +00:00
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
7e53663d5d
Add a bulk gerber export that's a wee bit smarter
2022-12-11 20:13:26 -05:00
65538ccad4
Rename files and classes to match dialog name.
...
Also a bit of formatting cleanup.
2022-12-11 18:42:57 +00:00
d27fb35780
A few more adjustments to wx 3.2 layout issues.
2022-12-11 14:12:35 +00:00
4e47b5c25f
Fix some layout and selection issues on Mac.
...
Some of these are due to moving to wxWidgets 3.2, but I'm not sure
all of them are. In particular, the need for CallAfter() in the
search pane's selection handler is probably just a wxWidgets bug on
Mac (the control lies about the current selection inside the event
handler).
Also sets better column widths in the search pane.
2022-12-11 00:56:46 +00:00
a7df573748
Clear bounding box caches *before* reverting commit.
...
We're going to re-add items to the view assuming they will have their
current locations, which requires the bounding boxes to be refreshed.
Fixes https://gitlab.com/kicad/code/kicad/issues/13084
2022-12-11 00:56:46 +00:00
75f1067642
GRAPHICS_CLEANER: fix bad detection of short Bezier curves that can be cleaned
...
eda_shape: small enhancement: when generating a polyline from the Bezier curve,
filter the last point if the last segment is shorter than the given min lenght
2022-12-10 18:19:09 +01:00
492e6548ff
If item is on mask layer then we won't call it again on copper layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13075
2022-12-10 13:51:00 +00:00
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
02325130fa
Initial arm64 work
2022-12-09 23:48:31 +00:00
aff5245041
Fix enum class DRILL_MARKS no export to python
2022-12-09 18:07:58 +00:00
b4b25a7009
Fix Pack & Move footprints when working with groups.
2022-12-09 20:42:35 +03:00
c1f82d0c80
Canceling Move cancels Pack too in Pack & Move footprints.
2022-12-09 20:41:56 +03:00
3d2b1aaf90
Improve H/V/45 deg mode when drawing zones and polygons.
2022-12-09 19:11:56 +03:00
ad33515916
Properties: mask visibility for free text
2022-12-08 18:06:14 -05:00
67df342255
Properties: mask irrelevant NPTH properties
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13087
2022-12-08 18:00:44 -05:00
72939e8918
Properties: enable in PCB editor for everyone
...
Leaving the AC flag around for future use in the footprint editor etc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2039
2022-12-08 17:38:36 -05:00
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
2b0d7f65d0
Properties: sync wxPGGlobalVars map state with editor global state
...
Thanks to @dsa-t for suggesting this
(maybe)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12297
2022-12-08 07:55:57 -05:00
435651237c
Properties: Support overridden availability functions
2022-12-08 00:09:51 -05:00
2fc0cd68ed
Avoid crashing due to empty lib tables in cli
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13097
2022-12-07 23:56:03 -05:00
33d76f63b0
Properties: save and restore splitter position
2022-12-07 21:38:33 -05:00
e03a91c9c7
Reduce static ratsnest opacity when moving items; tweak colors.
2022-12-07 21:01:56 +03:00
82874daf08
router: Limit the amount of move attempts in ROUTER::Finish
...
Otherwise auto-finish hangs in some cases.
2022-12-07 19:24:13 +03:00
aa537fe559
Change bezier curve iteration to be easier to read
...
Fix #https://gitlab.com/kicad/code/kicad/-/issues/11153 somewhat
2022-12-06 23:25:04 -05:00
25688eb75e
Include plotprint_opts.h in swig
2022-12-07 04:02:59 +00:00
24ca892afb
Update tinysplice to latest
...
A few years worth of bug fixes
2022-12-06 22:28:23 -05:00
61119fbf64
Poke a const to make gcc happy
2022-12-06 22:00:23 -05:00
c0b5fe58c3
Implement output targeting of symlib/fplib upgrade per request
2022-12-06 21:20:27 -05:00
593dc9e8b6
Some fixes in Gerber job file:
...
- Ensure colors use a normalized value (normalized name or RnnGnnBnn notation).
- Better code.
2022-12-06 17:01:37 +01:00
008704fc6f
router: Allow highlighting both DP nets when routing.
2022-12-06 05:24:23 +03:00
38a509e768
Properties: support bitmaps
2022-12-05 18:31:40 -05:00
c771d866f5
Cleanup 3D caches before d'tors run.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10973
2022-12-05 22:39:09 +00:00
d8f94962ff
Prevent halting the main GUI thread
2022-12-05 11:10:57 -08:00
0089df8ca4
Update comment in zone filler.
2022-12-05 21:48:12 +03:00
c4aed1d941
Make sure that threads are not running after zone filling.
2022-12-05 21:36:59 +03:00
6d513e7ecf
Expose changing arc edit mode in arc button context menu and Preferences
...
Ctrl+Space can still be used to cycle through modes.
Fixes https://gitlab.com/kicad/code/kicad/issues/5412
2022-12-05 21:28:16 +03:00
c3dddaf41f
panel_board_finish: mark board as modified when a finishing parameter is modified.
...
Fixes #13074
https://gitlab.com/kicad/code/kicad/issues/13074
2022-12-05 18:39:18 +01:00
295ef6588d
Fix uninitialized variable.
2022-12-05 14:42:05 +00:00
b7d41e0e56
Update simulator with NUMERIC_EVAL, decimal separator processing, etc.
...
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
2022-12-05 12:40:29 +00:00
4482e9f634
Minor UI fixes.
2022-12-05 00:37:25 +03:00
47e7cd2e90
Don't allocate/delete a PG_UNIT_EDITOR unless needed
...
We cannot actually delete the PG_UNIT_EDITOR without substantial issues
from the global variables in wx.
2022-12-04 10:27:38 -08:00
90ad4dcc05
router: Various bugfixes in length tuning meandering
...
- When fine-tuning, keep adjust to the original baseline length
- Enforce a minimum amplitude based on settings, DP gap and track width
- Use binary search to fine-tune amplitude if the length is not trivial
- Account for inequalities in balancing
- Don't add the meander if adding it with min. amplitude will make the
tuning worse
- Keep a distance after meandering end to prevent overlaps in DP
Fixes https://gitlab.com/kicad/code/kicad/issues/9267
Fixes https://gitlab.com/kicad/code/kicad/issues/1776
2022-12-04 16:30:00 +00:00
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
f6822120b3
Enable tab and return commit in property grid.
2022-12-04 11:51:44 +00:00
f805fd267f
Divorce UNIT_BINDER from wxFrame.
...
This allows us to supply Pcbnew or Eeschema as the unitsProvider when
called from the main frame.
Fixes https://gitlab.com/kicad/code/kicad/issues/13066
2022-12-04 11:51:44 +00:00
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
8c97a7b8c6
If fps contain complete board-edge holes then exclude those edges from main calc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12921
2022-12-04 11:51:44 +00:00
92266635cc
Add an advanced config value for the minimum sliver
...
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
2022-12-03 16:03:43 -08:00
b5bd633625
Strict-order points in connection_width
...
The connection width checker uses morton codes to order elements. The
sort should be primarily morton-based but needs to be stable in order to
ensure that nextZ/prevZ elements are properly placed as the actual
next/prev elements in the list. Otherwise, hitting a fracture point
might make us skip in the wrong direction
Fixes https://gitlab.com/kicad/code/kicad/issues/12831
2022-12-03 16:03:43 -08:00
497b368006
Pcbnew menubar: View/Drawing Mode/Sketch Text Items and Skecth Graphic Items:
...
Handle the Checked/Unchecked bitmap symbols of these 2 submenus.
2022-12-03 11:03:14 +01:00
4134db3c47
GCC fixes
2022-12-02 22:38:15 -05:00
050d282c12
Properties: Hide some copper-only properties from non-copper zones
2022-12-02 21:59:17 -05:00
a5f7ecbe00
Properties: support text knockout
2022-12-02 21:46:03 -05:00
0bc06d506c
Properties: reselect after canceled move
2022-12-02 21:40:21 -05:00
f9a36b9c91
Update thread_pool to 3.3
...
Fixes an issue with `wait_for_tasks()` and adds a lower-overhead
`push_loop` helper. We replace our usage of `parallelize_loop` with
`push_loop` as we didn't use the multi-future vector return and don't
need the extra overhead.
2022-12-02 12:01:34 -08:00
50d34e232b
pcbnew: fix a bug that crashes pcbnew on startup when running under gdb/msys2
2022-12-02 15:14:17 +01:00
bba8a0826e
Clear caches before undo operation.
...
The undo will remove/re-add items to the view in order to update the
RTree. However, if we only clear caches at the end (in the OnModify
call), then the (stale) bbox caches are still used for the re-add
operation, and they end up at the wrong place in the RTree.
Fixes https://gitlab.com/kicad/code/kicad/issues/13048
2022-12-02 10:59:48 +00:00
93c631af44
drawing_stackup_table_tool: fix incorrect color of dielectric sublayers.
...
when a dielectric has sublayers, the printed color was always the main layer color.
2022-12-02 10:41:20 +01:00
73b3f28c25
Properties: mask layer property for items that can't set it
2022-12-01 22:22:29 -05:00
ef3f2a8f1e
Properties: ignore shape props for textbox
2022-12-01 21:54:12 -05:00
e0ff8ba09c
Fix normalize flags for wx3.1
2022-12-01 18:49:08 -05:00
e56064696b
router: Refactor m_padToDieLength out of meander placer base.
2022-12-02 01:03:34 +03:00
3b25fdc212
Properties: Fix zones stomping on position props for other items
2022-12-01 16:55:12 -05:00
6066ccdfd5
STEP: Normalize path to kicad-cli
...
Keeping the path relative messes up the logic that loads the DSO
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12728
2022-12-01 16:55:12 -05:00
3501ad1b4d
Record layer for starved thermal exclusions.
2022-12-01 18:04:34 +00:00
20791c99ac
Allow conversion of single track segments and vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 17:15:29 +00:00
1aa05c0e10
router: Fix up single meander side switching.
2022-12-01 18:39:19 +03:00
d7368588db
stackup manager: fix incorrect handling of colors for multi-layer dielectrics
...
The dialog allows a color selection for each dielectric layer.
However for a "dielectric" defined by more than one layer, the color was handled
only for the first layer, and not for the other sub-layers.
2022-12-01 16:19:13 +01:00
c378d01068
code cleaning.
2022-12-01 16:01:38 +01:00
6befa1c57e
A bit of cleanup to recent convert tool changes.
2022-12-01 14:53:13 +00:00
4d8e73a630
Allow tracks as input to bounding hull generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 14:53:13 +00:00
757b73e50e
Hide some unusable zone properties
2022-11-30 23:36:53 -05:00
7dbdb68730
router: ADDED option to create single-sided meanders.
2022-11-30 20:39:02 +00:00
b31349b679
Get consistent point for gfx import
...
TopLeftItem() should always return same element for our import
Fixes https://gitlab.com/kicad/code/kicad/issues/13041
2022-11-30 12:25:34 -08:00
cf33f33899
Standardize placement tool modifiers
...
PlaceImage, PlaceImportedGraphics and PlaceText need to handle the grid
and hotpoint snapping as well as the modifiers to disable them
2022-11-30 10:57:42 -08:00
3c4c4e5166
Remove shortened debug time from zone refill message.
...
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
074c087c21
Allow disabling of grid snapping while placing imported image.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13040
2022-11-30 14:38:22 +00:00
98ab078905
Remember conversion strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13043
2022-11-30 14:29:16 +00:00
17bb57cc73
PCB: fix stale ratsnest between moves in Move Individually
2022-11-30 09:11:37 -05:00
03f79f512c
Nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12966
2022-11-30 14:02:22 +00:00
6dc1c9b0b7
Step exporter: filter very small segments when exporting them.
...
very small segments create issues in step export.
Add also more messages and more controls.
Fixes #13038
https://gitlab.com/kicad/code/kicad/issues/13038
Fixes #12905
2022-11-30 14:56:02 +01:00
8dbd6fee00
Go back to smaller chaining epsilon.
...
Using a large epsilon here to allow for sloppy drawing can cause
the algorithm to miss very short segments in a converted bezier.
So use an epsilon only large enough to cover for rouding errors in
the conversion.
Fixes https://gitlab.com/kicad/code/kicad/issues/12951
2022-11-30 13:26:45 +00:00
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
9fa8b9e49f
Fix memory leak and re-code non-memory-leak so Coverity can understand it.
2022-11-30 13:00:20 +00:00
ec4fd42bee
Pcbnew: force courtyard area shape rebuild afret rotation/flip.
...
Fixes #13039
https://gitlab.com/kicad/code/kicad/issues/13039
2022-11-30 09:07:32 +01:00
8c468dcffc
Use ecoords for distance comparison in PCB grid helper.
...
Fixes a bug where a cursor would jump to a far location while hovering
over some 45-degree tracks.
2022-11-30 08:18:19 +03:00
e4b7bc82be
Prevent UI events during footprint dialog ctor
...
Errors may get thrown when the 3d models are loaded for missing search
paths. This triggers the idle event that makes assumptions about the
state of the dialog. We halt event handling until the ctor finishes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12944
(cherry picked from commit be86e9f57f
2022-11-29 19:39:35 -08:00
81ab8a0499
Properties: Move orientation to basic
2022-11-29 18:56:15 -05:00
41ca2789a6
Get rid of shadowing warning
2022-11-29 18:12:39 -05:00
1a670f4673
Catch IO_ERROR thrown in timestamp gen
...
Missing nickname can throw when generating a timestamp, this should be
caught and prevent further work in the footprint loading (the entry does
not exist)
Fixes https://gitlab.com/kicad/code/kicad/issues/13029
2022-11-29 14:09:22 -08:00
abd818a426
Update msgpanel after entering or exiting group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13031
2022-11-29 21:33:04 +00:00
31eb91e9e5
Infobar for slow zone auto-refill.
2022-11-29 21:09:16 +00:00
0ee7f8e2bd
Fix 436f95e02e
...
NanoSVG does handle opacity (thanks Mark) but the check needs to be
unsigned if we are comparing the resulting down-shifted value against
zero
Fixes https://gitlab.com/kicad/code/kicad/issues/13033
2022-11-29 11:21:16 -08:00
436f95e02e
Don't look for alpha in nanosvg color
...
Nanosvg colors are only RGB, so we will never get an alpha value here.
Fixes https://gitlab.com/kicad/code/kicad/issues/13033
2022-11-29 10:44:03 -08:00
b6bd74d822
Replace single zone fill under "draft" terminology.
...
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
5fc5a2132b
Fix Properties panel to reference the correct frame
...
The properties editors are global but the frame that they reference is
not static, so we need to be able to update the frame reference when
restarting pcb editor from the main window. This updates the frame,
being careful to remove the signalling when closing pcbnew but keeping
the instance of the editor in place.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
2022-11-29 09:24:41 -08:00
ad6ef35c9f
PCB: Add skip action to Move Individually
2022-11-29 15:42:03 +00:00
6d52601241
Update stale tooltip.
2022-11-29 15:21:20 +00:00
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
8260f0ee13
Add support for unitless values to PCB_EXPR_EVALUATOR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13016
2022-11-29 14:24:20 +00:00
25d5defc10
Add cli for "fp" upgrade
2022-11-28 20:48:14 -05:00
bd40684ecd
Handle polygons' triangulation
...
Graphic polygons may be invalid and so need to be explicitly simplified
before triangulation.
Also clean up hole handling in triangulation routine
2022-11-28 15:46:12 -08:00
8165fc6c44
Give up trying to infer what kind of polygon the user wants.
...
In many instances there are 3 valid answers: mimic linewidths, use
centerlines, and build a bounding hull.
Fixes https://gitlab.com/kicad/code/kicad/issues/12950
2022-11-28 22:12:53 +00:00
137b4de1c2
Allow groups in groups
...
This was allowed in the qa test, so we allow it going forward
2022-11-28 11:28:31 -08:00
4a4fab78a3
PCB: allow swap while moving
2022-11-28 14:16:08 -05:00
3042633f4a
PCB: block unroute and move individually when already moving
2022-11-28 14:16:08 -05:00
259e41be2d
Don't add non-groupable items to the group
...
Things like markers and netinfo should never get added to the group,
even if we are inside the group while adding the items
Fixes https://gitlab.com/kicad/code/kicad/issues/13026
2022-11-28 09:11:20 -08:00
d232ade752
Remove cloned items from groups
...
When destroying, the group must be null and there's no group purpose in
the DRC checks
2022-11-28 09:11:20 -08:00
eb19e32b40
Performance optimization for pad drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-28 13:20:12 +00:00
b2b3f5752f
Properties: Add grouping and sorting by creation order
2022-11-27 22:40:23 -05:00
64f315c649
Move properties panel to widgets with the other AUI panels
2022-11-27 22:40:23 -05:00
3460c50afa
Attempt to avoid double-free when shutting down on Windows
2022-11-27 16:21:06 -08:00
5bbe21f540
Properties: don't rebuild the panel when closing an editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12984
2022-11-27 14:29:16 -05:00
c0ab2258a4
Update LAYER_PAD_FR when F_Cu colour changes (and same for back).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13012
2022-11-27 18:55:00 +00:00
ec9c6a8053
Separate creation of polygons for open and closed shapes.
...
This allows us to create a bounding hull from an open shape-line-chain,
which is useful for defining milled slots.
2022-11-27 18:29:41 +00:00
740e193871
Increase bounding box of stroke text and the leader box of all text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13009
2022-11-27 15:27:30 +00:00
1e3186b9cb
Allow pad-to-copper-graphic collisions in net-ties.
...
This is done under the same conditions as track-to-copper-graphic --
the pad or track must also collide with a net-tie pad, and the pad or
track to copper-graphic collision must be within the boundary of said
pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/13008
2022-11-26 15:04:33 +00:00
3f50199dad
TEARDROP_MANAGER: fix a corner case that generate a invalid teardrop polygon.
...
Also add a better handling of connected tracks when searching for a track connected
to a too short track to create a teardrop, search was stopped to Y connections.
Now the selected track is the longest of these 2 candidates.
Fixes #13006
https://gitlab.com/kicad/code/kicad/issues/13006
2022-11-26 14:37:20 +01:00
86d7638f10
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13005
2022-11-26 10:45:07 +00:00
b3559ae12c
Minor fix: make DIALOG_EXPORT_STEP_PROCESS_BASE correctly re-sizable.
2022-11-26 07:40:48 +01:00
74a2e4cad9
Properties: Add support for zone connection style
2022-11-25 18:44:02 -05:00
96fe93618e
Properties: Stop sorting by name
...
It's more useful to have properties shown in add order,
since we can group them
2022-11-25 16:29:56 -05:00
611c19016f
Properties: add support for string escaping
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12975
2022-11-25 13:15:46 -05:00
5061f0556f
Properties: implement ellipsization for name column
2022-11-25 12:37:47 -05:00
220ef6fb44
Properties: Add some missing footprint properties; cleanup
...
Add concept of "internal" properties that will be accessible from
Python/DRC but not shown in the Properties Manager
2022-11-25 12:37:47 -05:00
4aff5c7618
Keep courtyard caches alive during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-25 17:20:11 +00:00
fbc321c4c1
Fix initialization order
...
This avoids a conditional branch on an uninitialized value in valgrind.
2022-11-25 16:00:23 +00:00
8c7691fbc3
Harmonize on "Manager" for now, since we use that in the docs
2022-11-25 09:13:23 -05:00
bbea5b3fbc
Save and restore properties and search panel sizes
2022-11-25 09:11:30 -05:00
308576b78d
Properties: Use parent footprint references instead of UUIDs
...
Also remove redundant Net Name property (Net is used)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12334
2022-11-24 22:40:45 -05:00
11e784cf10
Properties: specialize layer setting for footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12480
2022-11-24 22:11:26 -05:00
88495e5be1
Properties: Fix masking of layers for non-copper items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12884
2022-11-24 20:34:40 -05:00
7a9467b0d5
Get rid of some gcc warnings
2022-11-24 17:05:58 -05:00
32836da14b
Don't show annular rings controls for vias that span only a single layer.
2022-11-24 18:05:37 +00:00
d6ae915616
Pay attention to layers when sorting pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-11-24 15:47:10 +00:00
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
16db0440ba
Fix logic that was accidentally flipped in earlier commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12962
Fixes https://gitlab.com/kicad/code/kicad/issues/12969
2022-11-23 23:10:28 +00:00
1aad2fb37b
Change via keep-start-end to be start/end, not top/bottom.
...
The implementation used to always check F_Cu and B_Cu, rather than
where the via started and ended (which will be different for blind/
buried vias and microvias).
2022-11-23 21:37:50 +00:00
5de4bfde93
Move drilled NPTH holes to hole-clearance checking. Edge-clearance
...
checking is just for milled holes (slots).
Fixes https://gitlab.com/kicad/code/kicad/issues/12980
2022-11-23 13:31:51 +00:00
e62463b52b
Don't store optimized anchors in CN_ITEMs.
...
It appears that multiple RN_NETs can refer to the same CN_ITEMs meaning
that we run into threading problems if we modify the CN_ITEM.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-23 00:46:06 +00:00
60d42a7b1e
Spelling: fix various suppress misspellings
2022-11-22 13:47:10 -05:00
b42d5da07d
Check keepTopBottom when determining whether or not to flash a pad/via.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12961
2022-11-22 18:18:43 +00:00
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
9403b5ce99
Unescape strings in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12963
2022-11-22 05:51:31 -08:00
50089ce558
Fix errors in handling of std::shared_ptrs.
...
We can't reset to a pointer owned by another std::shared_ptr.
2022-11-22 13:14:00 +00:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
740dbdf09a
De-initialize propertygrid when done
...
There doesn't appear to be a nice way to de-register wxPropertyGrids, so
we need to reach into the singleton and remove our registered editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
2022-11-21 16:36:00 -08:00
0e818360c4
Unescape netnames in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12960
2022-11-21 15:47:14 -08:00
50ecb5b498
Remove errant printf
2022-11-21 15:19:45 -08:00
11130bfd88
Backing out earlier fix in favour of fixing std::shared_ptr usage.
...
Assigning to a reference to a std::shared_ptr does not update the
reference to a different std::shared_ptr; it changes what the
std::shared_ptr points to.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 21:56:17 +00:00
106508f266
Split ratsnest optimization into separate parallel threads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 18:50:44 +00:00
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
c5fe265eb4
Take axis inversion into account when importing graphics. Fixes #9351 .
2022-11-19 17:25:27 +01:00
9b2606018e
Fix shadowed variable.
2022-11-19 11:53:33 +00:00
bab2b6c4b6
Don't assume a 1:1 map between Altium and Kicad nets.
...
We've found at least one Altium board which has duplicate netcodes
for the same net.
Fixes https://gitlab.com/kicad/code/kicad/issues/12909
2022-11-19 11:53:33 +00:00
b82ec9595a
Allow board importing into project.
2022-11-19 11:53:33 +00:00
035031d902
BOARD_CONNECTED_ITEM::GetShortNetname(): protect against nullptr.
...
m_netinfo was not tested against nullptr in this method, although it is
tested in all other places.
2022-11-19 11:16:47 +01:00
9f0c03db94
Export STEP dialog: Fix outdated text (virtual components). Replaced by
...
"not mounted components" and added a tooltip.
No actual code change.
Fixes #12922
https://gitlab.com/kicad/code/kicad/issues/12922
2022-11-19 09:31:37 +01:00
126d224e44
array_creator: Transform item before adding, modify only the first one.
2022-11-19 04:07:35 +05:00
11dddefd05
Implement GetEffectiveShape for groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12940
2022-11-18 21:13:23 +00:00
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
24c271d508
router: GetUpdatedItems() now returns an unique_ptr to the temporary NODE so that the items it owns do not get deleted upon return from the method
2022-11-18 15:14:33 +01:00
644c76b9c6
router: follow up via force propagation interface changes in the via DRAGGER
2022-11-18 15:14:09 +01:00
dcfb35f002
router: more resilient via force propagation
2022-11-18 15:14:09 +01:00
3960f48b5d
Fix a fatal compil error on gcc.
2022-11-17 08:39:42 +01:00
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
5e7c4b734c
Small optimizations in DRC and SHAPE_POLY_SET.
2022-11-17 02:10:22 +05:00
3dea146488
router: Clear rule resolver caches on routing/dragging start.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-17 02:10:21 +05:00
3f790d9dae
Revert "router: Disable writing clearance cache for items in local variables."
...
This reverts commit 6d71f27500
2022-11-17 02:10:20 +05:00
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
6d71f27500
router: Disable writing clearance cache for items in local variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-16 21:19:56 +05:00
1b3f03a800
Don't feed wxWidgets negative column widths.
2022-11-16 13:33:55 +00:00
13f5c78e89
More tightening of group parent lifecycles.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12908
2022-11-16 00:42:38 +00:00
26a38797c7
router: log and replay the 'unfix' events too
2022-11-15 23:05:53 +01:00
b507c44d74
router: fix regression in Backspace (unfix/undo last segment) caused by redesign of the line placement algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12835
2022-11-15 23:05:53 +01:00
f9bfb8534f
Fix orientation of track netnames.
2022-11-16 00:43:06 +05:00
5759a3a10a
Fix copy/pasta from previous commit.
2022-11-15 16:01:24 +00:00
f13ffa8276
Step export: fix incorrect export of a pcb with multiple main outlines.
...
The code was existing but did not work fine with more than one outline
Fixes #6684
https://gitlab.com/kicad/code/kicad/issues/6684
2022-11-15 16:37:00 +01:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
93c6d99a6d
Move saving preferences out of the destructor.
...
For other reasons we wrap the adapters in a wxDataObject, which has
delayed destruction semantics, but that means the settings stuff may
no longer be around when the d'tor executes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12371
2022-11-14 20:01:37 +00:00
bc0a753238
Slight improvement to overly-wide checkbox columns.
2022-11-14 20:01:37 +00:00
e85a84b8a3
Fix the step export for now
...
Need to fix argparse to handle single quotes and double quotes better
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12899
2022-11-14 07:31:23 -05:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
50dcf258e6
Adjust the position file comment header
2022-11-13 18:43:49 -05:00
d3606cb4e4
Fix position export job not running
2022-11-13 18:42:23 -05:00
f4944f0db3
Quiet clang getting its knickers in a knot over case fallthroughs.
2022-11-13 23:01:48 +00:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
cedef5912e
Link to zlib for pcbnew due to step
2022-11-13 17:58:41 -05:00
126914859a
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
2022-11-13 21:07:09 +00:00
ea83449ef7
Change up the step export arg handling to single quote for now
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12890
2022-11-13 11:49:20 -05:00
0a8db3bb88
Fix forgotten handling of origin offsets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12889
2022-11-13 09:22:59 -05:00
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
365674dfdf
Footprints in the footprint editor can't be in a group.
2022-11-13 13:18:42 +00:00
6a9a1e6e65
Print hole walls if in colour (and printing real drill sizes).
2022-11-13 13:18:42 +00:00
49ff3513e7
Add missing lib (libz) in lib list to link on msys2
2022-11-13 09:29:48 +01:00
9c5fbdb040
Fix compatibility with OCC version 7.4 and older
2022-11-13 08:18:10 +01:00
066a609b39
Cleanup warnings in the step exporter
2022-11-12 21:52:54 -05:00
3dd2ae762d
Refactor step export to use our normal board processing routines
2022-11-12 21:27:10 -05:00
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
90238dede8
PCBNEW_PRINTOUT: fix incorrect size of holes printed with the "small drill" option
...
Fixes #12880
https://gitlab.com/kicad/code/kicad/issues/12880
2022-11-12 16:02:24 +01:00
31bad5baaa
Avoid duplicating similar options in print and plot headers
2022-11-12 16:02:24 +01:00
348c3d4216
Fix an incorrect calculation in length tuning tools.
...
MEANDER_PLACER_BASE::lineLength wasn't calculating the length correctly
when starting and ending pads were on different layers.
Naturally, now jointA corresponds to the start of the path, jointB to the end.
Fixes https://gitlab.com/kicad/code/kicad/issues/12881
2022-11-12 13:11:27 +00:00
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
f846bc833b
Don't error out when enumeration of footprints fails.
...
We still want to load the ones that did enumerate.
Fixes https://gitlab.com/kicad/code/kicad/issues/12864
2022-11-10 13:48:04 +00:00
36eb853570
Formatting.
2022-11-10 13:48:04 +00:00
3e3ed0f3ee
Formatting and naming. (No functional changes.)
2022-11-09 16:31:29 +00:00
da171b9665
0,0 origin isn't an option we give to the user.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12324
2022-11-09 16:20:52 +00:00
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
85e44c2dae
pcbnew, SVG import: fix an issue for SVG files using a CR+LF end of file
...
The issue was in a validity test working only if CR+LF is not replaced by LF
Fixes #10096
https://gitlab.com/kicad/code/kicad/issues/10096
2022-11-09 09:33:51 +01:00
8b7d997a6d
Fix broken refactor
...
Don't trust the automatic refactor. It misses the strangest things
2022-11-08 20:30:30 -08:00
39774463db
Remove extra line
2022-11-08 16:35:03 -08:00
2ada7db282
Update footprint editor's board with changed prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12678
2022-11-09 00:30:39 +00:00
Jeff Young
Jon Evans
Marek Roszko
jean-pierre charras
Seth Hillbrand
Mike Williams
Alex
Tanay Gupta
Jan Mrázek
Ian McInerney
Simon Richter
Alexander Dewing
Yang sheng
qu1ck
Graham Keeth
Kliment
Tomasz Wlostowski