Also improves some terminology for english-speakers.
Also substitues [] vector access (which creates empty elements) over
at() (which throws if the item is not found).
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
The search field on the Symbol Editor is focused when its window
is first opened. Similar behavior has been implemented in the search
field of the Footprint Editor with this change.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13100
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
Check for already loaded schematics in the current sheet path as well
as the current project root sheet path to prevent multiple loads of
shared schematic. This bug was causing shared sheets to be loaded more
than once which caused instance data to get separated by each copy rather
than saved in one copy of the schematic which would result in all instance
data being lost except the last saved copy of the schematic. This bug has
been around forever and may be the cause of some unexplained schematic
instance data corruption issues. This bug does not apply when opening
the full project.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11076
Some of these are due to moving to wxWidgets 3.2, but I'm not sure
all of them are. In particular, the need for CallAfter() in the
search pane's selection handler is probably just a wxWidgets bug on
Mac (the control lies about the current selection inside the event
handler).
Also sets better column widths in the search pane.
Also removes a bunch of std::string stuff from the file handling in the
simulator. All our file handling, env variable expansion, project path,
etc. stuff is wxString based, and jumping through std::string in between
just makes it more complex and increases the potential bug surface.
Also fixes a bug where you'd get two error messages when a spice model
library wasn't found.
Also fixes a bug where you'd get a spice model library not found error
when the text field was empty.
Also fixes a bug where we'd try to absolutize a path starting with an
unresolved text or environment variable. If the path starts with a
variable it's probably absolute, and tacking on the project path in the
error message just obfuscates things.
Fixes https://gitlab.com/kicad/code/kicad/issues/13082
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
The properties editors are global but the frame that they reference is
not static, so we need to be able to update the frame reference when
restarting pcb editor from the main window. This updates the frame,
being careful to remove the signalling when closing pcbnew but keeping
the instance of the editor in place.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
The modifier keys on the keyboard control the motion spacing (Ctrl) and
shouldn't be confused with the modifier key used to disable grid
snapping when moving with the mouse (also Ctrl)
Fixes https://gitlab.com/kicad/code/kicad/issues/13027
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
Oh dear, there was a bunch going on here. Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places). But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.
Fixes https://gitlab.com/kicad/code/kicad/issues/12577
Keeping a function reference is only in scope when the call is
immediately executed, not when it enters its own event loop.
This commit also excises one more onUpdateUI call as it is not needed
Fixes https://gitlab.com/kicad/code/kicad/issues/12395
Using arc angles to plot an arc is really error prone due to different
options between plotters, and angles defined in Kicad, using this version of
arc plotting from Kicad is no longer allowed in Kicad code.
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
1) Push a VAR onto the stack, not a resolved value
2) Don't collapse a PCB_LAYER_VALUE to a VALUE during processing
3) Make sure we run overloaded operators from the correct side
Fixes https://gitlab.com/kicad/code/kicad/issues/12437
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
We used to use the bold setting, but since PCBNew allows you to
directly define the width you end up with settings in between normal
and bold that get clamped to the normal max.
Fixes https://gitlab.com/kicad/code/kicad/issues/12367
CHANGED: Symbol chooser search now considers custom symbol fields
Visible columns can be controlled in database libraries.
In standard KiCad libraries, we show columns for all custom fields for now.
Customizable column visibility will be added in the future.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11946
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
Pinned packages don't affect available update notification and will not
be updated with "Update All" button. Manual update is still possible but
will trigger a confirmation dialog.
Since single-row queries are performed rapid-fire during certain actions like
stepping through the symbol browser, there is high value in caching them for
a small amount of time. The default cache parameters will keep results for
10 seconds, which errs on the side of getting fresh data from the database
on most user interactions.
Since EDA_TEXT is a base class, we can just force the child classes to pass the correct iu scaled size
ALLOW_BOLD_THICKNESS removed because it's a pre-custom font holdover
Sub-libraries allow a single-level hierarchy inside a symbol library.
This is useful for database libraries and for supporting other EDA library types where a
single file can contain multiple logical groupings of symbols.
Also moves most navigation code to SCH_NAVIGATION_TOOL.
Also changes page number href to anchor syntax ('#foo').
Also adds hypertext processing to SCH_TEXTBOXes.
Also adds combobox with schematic pages to text properties dialog.
The problem is that "real" page numbers can be duplicated, so we work around it
by using virtual page numbers instead which are guaranteed unique.
Example "goto:3" will go to page 3. If customised page numbers are used such as
a, b, c, then to go to page b, we should specify goto:2 (i.e. the virtual page
number).
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
Allows placing parts from an external database that reference symbols from another loaded library.
Includes:
- nanodbc wrapper
- database schematic library plugin
- basic tests
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7436
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
wxWidgets 3.1 has deprecated wxPATH_NORM_ALL when normalizing file
paths when calling wxFileName::Normalize(). This change keeps the
existing behavior except in places where our own internal
ExpandEnvVarSubstitutions() to expand environment variables.
Reduces multibyte conversion banging on library load. uuids already are ASCII by their nature and the logic checks that or else it generates a new kiid.
Unconnected items and schematic partity violations are also now
represented by markers, so the ERC/DRC window itself needs to do
the deep-delete.
Fixes https://gitlab.com/kicad/code/kicad/issues/12182
This allows us to switch back to a standard modal dialog (instead of
quasi-modal, which has problems with Ctrl-V in a search box inside a
standard file dialog -- such as when picking a path).
Fixes https://gitlab.com/kicad/code/kicad/issues/9473
This allows them to work in places like search boxes in standard file
dialogs. If wxWidgets doesn't find the standard IDs in our menus
then it won't enable them.
In wxWidgets 3.15 (and perhaps older version) the call to GetTextExtent() probably
creates major issues when called too many times, at least oo msys2.
It was probably also time costly.
Calling it and resize the PROGRESS_REPORTER only when needed fixes these serious issues.
Issues happened only when the board has a lot of zones (when teardrops are added)
With that also begin reworking the internal structure of the simulation
model storage. Some models have parameter information extracted from
Ngspice, which was specially patched to faciliate that. The model is
stored and managed by the SPICE_MODEL class (later will be renamed to
SIM_MODEL).
The wxtimer can fire multiple times and there exists the possiblity for
this to happen before the flags are properly set to prevent it. This
creates a concurrency mutex to skip the EDA_DRAW_PANEL_GAL refresh if
one is already underway.
Fixes https://gitlab.com/kicad/code/kicad/issues/12094
(cherry picked from commit 39dd51490d)
These can happen when a tool is active that sends signals when exiting
(e.g. deselectEvent). These may be caught by the active loop in another
tool which might try to update the UI after it has been freed. By
marking all tools as "shutdown", the only event returned to them should
be null. As an extra precaution, we flag the shutdown globally within
the tool manager and check this flag before launching either events or
new tools
Fixes https://gitlab.com/kicad/code/kicad/issues/10698
Board setup rows should be sortable when inserting new elements. They
get sorted when saving, this keeps that representation while editing
Fixes https://gitlab.com/kicad/code/kicad/issues/12015
Also find a few more places where we are reaching into a new frame to
perform actions that need to have dialogs closed.
Running actions should also wait for the next cycle rather than being
immediately executed when we are calling into a new frame. This allow
for the cleanup actions onClose() to happen prior to the next action
starting
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Converts dialog_image_editor to panel_image_editor. Embeds this panel in
a new properties dialog for the schematic and PCB editors that allows
editing position, layer, locked status, etc. like other items.
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
on gcc 12.1 / msys2 the large initialized list in bitmap_info.cpp breaks
the compiler (perhaps a bug in the compiler).
So, as workaround, the initialization sequence is modified.
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
The swatches are surrounded by non-scaling icons. We should not scale
the swatches unless we also scale the icons. This patch makes all
elements in the appearance panel equally non-scaling
This relates to https://gitlab.com/kicad/code/kicad/-/issues/11880
The main purpose is to make changes in g_BitmapInfo more easy.
Although it is automatically generated, it is sometime more easy to modify
it by hand (the recreation of bitmaps stuff is time consumming), especially
during testing.
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
gcc ignores the c++17 standard advisory in some versions and simply
doesn't warn about unused private variables. Clang and MSVC do warn
about unused private variables and do follow the standard
When using the "Filter" search for footprints/symbols, the least
surprising outcome is that the window filters the existing
(alphabetically sorted) list but does not change the display order based
on scoring.
This also needs to adjust the fix for
https://gitlab.com/kicad/code/kicad/-/issues/259 as that assumed the
selected element would be the first below the group (not the case if we
are sorting alphabetically)
Fixes https://gitlab.com/kicad/code/kicad/issues/11746
- Don't use GLX extension functions unless they are supported on the
connection. GLEW only checks for client library support.
- Don't try to set swap interval using glXSwapIntervalSGI when vsync is
not requested.
Fixes https://gitlab.com/kicad/code/kicad/issues/11751
Also implements a uniform mechanism for avoiding auto-scroll after
a prime event or dialog which results in a mouse position at the
edge of the canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/11057
Also adjusts metrics to better match stroke font.
Also removes text-halo highlighting as it's too expensive to re-render
when the zoom changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/11460
Our menu bar code is interestingly complex. But we were throwing away newly made menu items to the void in the cases of constructed on the fly submenus
CHANGED: The text variable ${SHEETNAME} now always represents the name of the
sheet when used anywhere in the schematic editor, including the title block
ADDED: A new text variable ${SHEETPATH} which is replaced with the path to the
current sheet - e.g. "/Sheet 1/Sheet 2".
To ensure backward compatibility, the default drawing sheet now uses
${SHEETPATH}. Custom drawing sheets will need to be manually edited.
This also fixes a failure to use the correct effective width for
shapes (which might, for instance, inherit their widths from schematic
defaults, netclasses, etc.).
Fixes https://gitlab.com/kicad/code/kicad/issues/11358
Only SVG can actually handle transparency, but we should at least mimic
the color value of other transparent fills by blending with a (presumed)
white paper.
Fixes https://gitlab.com/kicad/code/kicad/issues/11304
We only need one bottom to top layer sequence definition.
Plot a sequence of layer IDs (LSEQ) in the order of the sequence.
Add helper method to layer set (LSET) to create a sequence of layer IDs
using another sequence for ordering.
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
Previously, coordinates were clamped to +- 60 inches. It makes no sense to
clamp them at plotter level: max cooed depends on the editor (schematic/board...)
Rename MAX_PAGE_SIZE_MILS to MAX_PAGE_SIZE_EESCHEMA_MILS and use it only for Eeschema.
Fixes#11196https://gitlab.com/kicad/code/kicad/issues/11196
When moving windows between monitors on Mac that changes the DPI, we
observe incorrect re-sizing of columns and rows. This attempts to
rectify the situation by avoiding DPI changes for Mac builds.
Fixes https://gitlab.com/kicad/code/kicad/issues/10586
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
Arcs can be altered by the process of changing from on-disk
representation to in-memory representation. Saving back to disk without
modifying the arc should not modify the calculated values.
This stores a copy of the on-disk representation that is only used to
save back to disk in the event that the arc is not modified during
editing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10442
The fix for https://gitlab.com/kicad/code/kicad/issues/10529 kicked the
subsequent IDs for unit selection off the maximum ID value for popup
menus. This increases the maximum popup number (integers are free)
(cherry picked from commit 79b6991d7b)
This is for the out-of-box experience for novice users. It is presumed
that folks with larger more complicated boards will turn it off.
Fixes https://gitlab.com/kicad/code/kicad/issues/6413
It avoid trying to calculate arc angles (start, end or arc angle) that
frequently create issues due to reverse Y axis, plot mirrored and/or
angle normalization with different criteria.
Fixes#10914https://gitlab.com/kicad/code/kicad/issues/10914
Alex
Gary Kim
Jeff Young
Mike Williams
Wayne Stambaugh
Jon Evans
Seth Hillbrand
Tanay Gupta
Marek Roszko
jean-pierre charras
Mikolaj Wielgus
Bevan Weiss
Tomasz Wlostowski
Scott Hanson
Ian McInerney
qu1ck
lulu731
kliment
aris-kimi
Roberto Fernandez Bautista
Maciej Suminski
Fabien Corona
Miklós Márton
Mario Luzeiro
markus-bonk
Ola Rinta-Koski
Werni