d78b41969f
Fix broken autosave when board is modified.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12700
2022-10-22 15:49:03 -04:00
63002cec57
Do not add a title/comment in mandatory field strings when writting netlists.
...
This is mainly for "Sheetfile" property because current it is the only one
that has a title when plotting/drawing it.
2022-10-22 12:50:26 +02:00
ce2dbdec75
Formatting and a bit of cleanup.
2022-10-21 18:41:39 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
d1bf889e71
Resolve embedded text vars
...
Title Block text variables are embedded into the pcb file and should
be used for resolving when the project file is missing
2022-10-21 08:37:37 -07:00
67985510a8
Fix selecting pads of footprints in groups.
2022-10-21 17:13:24 +03:00
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
3451506d25
Slight performance improvement.
2022-10-20 18:37:48 +01:00
323c04af2c
Fix order-of-ops issue with calling collide before tesselating.
2022-10-20 18:37:48 +01:00
6aa515e2f8
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:27:35 +02:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
1f0fa3ef63
Fix bug in new optionally-flashed via/pad zone fill logic.
2022-10-18 14:02:47 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
92f1ee556f
Don't fill drawing sheet rects with transparent fill.
...
It might make sense to do that with board and/or schematic items for
hit-testing or something, but it definitely doesn't make any sense for
the drawing sheet border.
Also, when reading in items with a transparent fill, treat them as
unfilled (otherwise we get filled with layer colour in at least PCBNew).
2022-10-17 17:51:11 +01:00
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
f3bb34779a
TransformTextShapeWithClearanceToPolygon() add optimization for 3D viewer.
...
This function convert a text shape to a set of polygons for the 3D viewer.
Texts shapes are a bit special and can generate a lot of small overlapping polygons.
These polygons are now merged before being added to the list of polygons handled
by the 3D viewer draw functions.
Locally merging polygons is usually not efficient but in this case it can speedup
the 3D viewer (up to 10x).
Mainly noticeable for silkscreen layers when the "copper" thickness is shown
2022-10-17 07:32:30 +02:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
631980b0ab
We were saving the old board pointer, but not updating the current one.
...
This also makes a few other adjustments to order and to where we look
for the enabled layers which should make it more robust.
Fixes https://gitlab.com/kicad/code/kicad/issues/10925
2022-10-16 18:39:37 +01:00
73e1676bdb
Fix const-reference property access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12639
2022-10-15 20:22:38 +01:00
d1fb32f26c
Formatting.
2022-10-15 19:09:25 +01:00
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
b012cc1ac3
Don't resolve footprint text variables in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-15 16:05:22 +01:00
0d7185c2ff
Fix mismatch between PCB_VIA defaults and file format defaults.
2022-10-15 11:17:58 +01:00
a855c9a40c
Fix not handled exceptions.
2022-10-15 10:27:00 +02:00
8098db2a20
BuildBoardPolygonOutlines: enable multiple main outlines: it works fine in 3D viewer.
2022-10-15 09:33:27 +02:00
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
7ffdfb1067
Clear Scintilla undo history after setting initial text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12650
2022-10-14 22:01:20 +01:00
6f9bc0980b
Refactor poly outline generator to handle multiple outlines.
...
Note: disjoint outlines are handled in footprint courtyards, but not
for board outlines.
Fixes https://gitlab.com/kicad/code/kicad/issues/7660
2022-10-14 20:32:04 +01:00
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
46a41e2e34
Pin 0-sized pads at 1um rather than throwing them out.
...
(See bug report for more commentary.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12617
2022-10-13 14:47:50 +01:00
08260661b8
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
2022-10-13 13:05:51 +01:00
d1450e1802
Commenting.
2022-10-13 13:05:51 +01:00
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
efa14e501c
Cleanup.
2022-10-12 16:36:54 +01:00
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
bd1114d94d
Move footprint properties dialogs to symbol properties grid resizing strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9883
2022-10-12 00:38:44 +01:00
e02c05d38f
Add unit and eval support to WX_GRIDs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1871
Fixes https://gitlab.com/kicad/code/kicad/issues/4285
2022-10-11 23:40:58 +01:00
c9f11827a7
Don't connect disparate nets
...
Only some elements get their nets assigned based on connectivity. Other
elements should be keps in different clusters for connection
Fixes https://gitlab.com/kicad/code/kicad/issues/12622
2022-10-11 15:03:51 -07:00
57a6aeb86a
Redraw ratsnest after removing teardrops.
...
No, I don't know why this is needed. But after a couple of hours trying
to chase it down, return-on-investment is fading....
Fixes https://gitlab.com/kicad/code/kicad/issues/12420
2022-10-10 21:07:18 +01:00
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
3221877fe8
Push autosave-require down in to EDA_BASE_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11790
2022-10-10 14:03:52 +01:00
be6f08deca
Code clarity. (No functional changes.)
2022-10-10 14:03:52 +01:00
b2f05c758b
We don't always have a line when dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12612
2022-10-10 11:44:17 +01:00
ea6fb84351
Formatting.
2022-10-10 11:44:17 +01:00
6bc00eabaf
dialog_dxf_import dialog minor UI fixes
2022-10-10 02:51:24 +00:00
35a14b8e5d
Better error messages (and make an empty pad an error, not a warning).
2022-10-09 20:28:54 +01:00
e866dfe137
Avoid trying to draw empty pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
2022-10-09 20:28:54 +01:00
4a66203493
Update zone layers for all layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12128
2022-10-08 23:27:59 +01:00
3b63ce8a48
Don't use the 3d resolver config anymore
2022-10-08 14:27:10 -04:00
27f8abd8a1
Fix compatibility with wxWidgets 3.0
...
change wxOVERRIDE -> override
2022-10-08 17:34:37 +02:00
faae4f9eea
kicad2step: force immediate printing of messages (mingw issue: we need to flush the stdout buffer)
2022-10-08 16:43:14 +02:00
aaa1d166a7
Redirect step export output to a pretty window
2022-10-08 09:48:00 -04:00
51c20da93e
Areas might have layers defined in area as well as rule.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12584
2022-10-07 23:52:47 +01:00
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
2577ebb94d
Increase dynamic ratsnest opacity for better visibility.
2022-10-07 21:50:12 +00:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
d6f1d5da76
Start-routing list needs to be a white list, not a black list.
...
We check the collisions later in the same routine, which is where all
the black-listed objects come in.
Fixes https://gitlab.com/kicad/code/kicad/issues/12595
2022-10-07 18:18:02 +01:00
b8dfbe02ad
Fix some issues in STEP exporter
2022-10-07 18:53:31 +02:00
bc58480e24
Missed some other uses of m_startItem in previous commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 14:01:46 +01:00
cbb997a3b5
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 10:34:11 +01:00
01a1d148e6
Make a sentence understandable and translatable.
...
Fix a minor compil warning
2022-10-07 10:11:02 +02:00
165654f114
Expose Switch Arc Posture in context menu.
2022-10-07 08:28:13 +03:00
d26b59a0bf
Improve arc construction using angles from arc geometry manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11713
2022-10-07 06:51:00 +03:00
2741d0eb4b
Fix crash on Specctra import.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12583
2022-10-07 03:03:34 +03:00
22917860ef
Move Enter Group for easier access.
2022-10-07 03:03:33 +03:00
098e96f1c7
Use more precise formatting in DRC messages when less precise values are identical.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
9119b5072a
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
d6c7f46842
Formatting.
2022-10-06 22:18:53 +01:00
0fea6f5ac3
Fix selection and entering in nested groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12586
2022-10-06 21:02:36 +03:00
f818f3a445
Fix footprint rule and zone area anchors
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12575
2022-10-06 15:29:18 +00:00
40ad5b6de3
Broaden reset-sizes-after-layer-switch algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-06 15:50:22 +01:00
6927e75eae
Handle keepout areas with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12581
2022-10-06 15:08:56 +01:00
19d270fe74
Text size sanity checking for TEXT_ITEMS_GRID.
...
Oh dear, there was a bunch going on here. Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places). But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.
Fixes https://gitlab.com/kicad/code/kicad/issues/12577
2022-10-06 13:19:08 +01:00
d8a3ba7917
Update router sizes when switching layers.
...
We may have layer-specific rules involved. Note that at some point
we also need to do something similar on every "fix route" step to
handle area-specific rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-05 16:45:42 +01:00
6ddc5c1a6e
Fix run from build dir for step
2022-10-05 03:53:56 +00:00
3fe004fd1b
New kicad-cli will now be the cli interface
2022-10-04 22:24:13 -04:00
87171f53c7
Speedup dynamic ratsnest
...
Removes some unneeded calculations and threads the remaining.
Threading was previously removed to avoid overhead issues with small
boards. This is no longer needed with the thread pool implementation
Fixes https://gitlab.com/kicad/code/kicad/issues/12131
2022-10-04 17:06:45 -07:00
a0865082fb
Fix compile warnings
2022-10-04 17:06:45 -07:00
0c7b6c3cbc
fix minor compil warnings
2022-10-04 19:51:51 +02:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
436d75e7f9
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
2022-10-04 17:01:56 +01:00
524a43f95e
Don't select footprints on the wrong side if not visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12483
2022-10-04 13:22:06 +01:00
fb8a4c10f7
Shove kicad2step into pcbnew itself with a new cli
2022-10-04 01:53:37 +00:00
b716afd6f1
Clarify various uses of "Center"
...
Distinguish between the english verb "Center" and the noun "Center",
which may be translated differently
Fixes https://gitlab.com/kicad/code/kicad/issues/11109
2022-10-03 12:48:57 -07:00
15d52c91e4
Clear ratsnest when removing nets
...
While we can keep the vector for nets, we need to ensure that the data
are cleared to prevent stale pointer access
Fixes https://gitlab.com/kicad/code/kicad/issues/12564
2022-10-03 09:33:31 -07:00
97d4df4154
Better thread safety for zone boundingbox caches.
2022-10-02 19:30:43 +01:00
adbbceacda
Make footprint type check more narrow, and set default to ignore.
2022-10-02 18:19:43 +01:00
1fc5ecae6e
Minor dialog layout improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12497
2022-10-02 11:45:30 +01:00
a7775bab26
Manage the Search panel visibility state in view menu.
...
Fixes #12533
https://gitlab.com/kicad/code/kicad/issues/12533
2022-10-02 10:20:26 +02:00
7059ef9b89
Store netclass visibility separately from nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10290
2022-10-01 19:54:13 -04:00
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
6d298b661a
Minor speedup for some dynamic ratsnest cases
2022-10-01 13:43:57 -07:00
d776e908d0
Fix an edge-case in the spoke genration logic for non-cardinal spokes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12549
2022-10-01 19:31:47 +01:00
7be05e9eb1
Make sure we have nets before grabbing the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12554
2022-10-01 13:50:26 +01:00
ba630971af
Possible fix for move/esc/esc crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12553
2022-09-30 23:05:55 +01:00
c0a666507c
Work around more instances of the wxWidgets color string locale bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12552
2022-09-30 20:56:25 +01:00
f095453d3e
Optimize ratsnest line endings for zones.
2022-09-30 19:04:54 +00:00
a2a442a9f7
Plot Gerber, StartPlotBoard(): display a error message if the layer is not valid.
...
It can happens in Python scripts, when the layer is not set when starting plot,
and therefore the Gerber file header is incorrect.
2022-09-30 18:16:11 +02:00
6a6ef9b1f4
Bring adding-to-group and hiding in sync.
2022-09-30 16:45:00 +01:00
c87a5ff0ab
Remove elipsis from Remove Teardrops.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12550
2022-09-30 13:04:58 +01:00
2372f24cb0
Don't include hidden text in group boundingbox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12541
2022-09-30 13:02:08 +01:00
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
b6efb88ee9
Fix logic error when filling zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12542
2022-09-29 17:46:24 +01:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
b5dfa4e2fb
Fix not handled exception, creating a crash.
...
Fixes #12536
https://gitlab.com/kicad/code/kicad/issues/12536
2022-09-29 13:08:23 +02:00
7e486327d9
Ibis differential and PRBS models
2022-09-29 08:35:01 +00:00
9894acea76
Spelling
2022-09-28 17:09:43 -07:00
4095172259
ADDED: Pack and Move Footprints, improved footprint spread algorithm.
2022-09-28 13:37:23 +00:00
b6eb5f721a
Remove old rect placement algorithm.
2022-09-28 13:37:23 +00:00
ba6afafc86
Router Tool: get rid of getNearestRatnestAnchor
...
Unused now that the PNS Router handles the actions that needed it.
2022-09-28 13:29:52 +00:00
6252840abd
PNS/Router Tool: Refactor Continue From End
2022-09-28 13:29:52 +00:00
1be0deb58f
PNS/Router Tool: Refactor Finish Route
2022-09-28 13:29:52 +00:00
b1f2273bc6
PNS: Add CurrentStart() to placers.
2022-09-28 13:29:52 +00:00
dcc325b3b2
More about fix compil issues and warnings, especially in ibis code.
...
A few are msys2 specific and due to include files order.
2022-09-28 11:26:07 +02:00
7d20418d6f
Fix compil issues and warnings, especially in ibis code.
2022-09-28 09:55:00 +02:00
5b9fcc0ba0
Cvpcb: Reload footprint libraries in CVPCB
...
CHANGED: Reload footprint libraries in CVPCB when footprint library table(fp-lib-table) is updated
2022-09-27 22:58:03 +00:00
3a7068b346
Iterate on a copy of the selection since we're going to delete from it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12484
2022-09-27 23:54:19 +01:00
6b15231f4b
Add code to set better default layer widths.
...
This affects both the layer count dropdown and the "Adjust dielectric thickness" button. Changing layer widths will now maintain the same total board width and set layer widths to common manufacturer values. Layer widths can be locked (as before) to keep any manually defined values.
2022-09-27 21:24:48 +00:00
528fe4d371
Add Ibis to spice model editor
...
ADDED: IBIS models are now supported in Sim Model Editor
2022-09-27 20:47:00 +00:00
1a812727cb
Fix some logic errors in importing SVG polygons with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11479
2022-09-27 17:45:21 +01:00
dc07ab9df1
Replace PROF_COUNTER with PROF_TIMER in some conditional places.
2022-09-27 14:07:47 +00:00
b70ffddb04
Terminology and coding style.
2022-09-27 12:23:38 +01:00
9e580b3116
Other -> Unspecified and a couple of other terminology improvements.
2022-09-27 12:15:18 +01:00
57a79f3020
Coding standards.
2022-09-27 11:50:14 +01:00
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
f4a3062684
PCB: Select Unconnected
...
Selects the all unconnected items for each selected routable item.
2022-09-26 16:17:41 -04:00
e66393c4dd
PCB Tools: Move Individually
...
Allows moving a selection of components one by one.
2022-09-26 16:17:41 -04:00
cfa26fb706
Fix footprint relative path resolution for idf/vrml export
2022-09-25 23:40:25 -04:00
707a598e5d
Prevent a crash due to the 3d preview dummy board stealing setting ownership
2022-09-25 23:04:13 -04:00
c50b4fb04f
Add relative to footprint 3d model path resolution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2073
2022-09-25 22:56:16 -04:00
8e96751af2
Strip out and migrate 3d search paths in favor of env vars
...
This mainly stops reading/writing 3dresolver.cfg
We still keep some sillyness for kicad2step for now
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9164
2022-09-25 21:29:52 -04:00
16d5c43c14
Fix shadowed variable.
2022-09-25 22:04:56 +01:00
b4701593fb
Restore parent group pointers on undo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11914
2022-09-25 21:45:29 +01:00
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
05a8650158
Add forgotten save of setting
2022-09-25 12:03:45 -04:00
2490ad1458
Fix search panel not remembering visibility
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12494
2022-09-25 11:56:41 -04:00
59d62f7df1
Untangle some includes
2022-09-25 11:37:06 -04:00
40ff7cb9bd
Fix some UI element spacing in settings panels
2022-09-25 15:41:39 +01:00
ea259fd093
Remove extra creation of an outline for the soldermask zone
...
The zone class initializes the outline with an empty SHAPE_POLY_SET, so
adding a new SHAPE_POLY_SET outline in the BOARD constructor causes a
leak of the original.
2022-09-25 15:41:39 +01:00
a381a0acb2
Generalize bookmarks to support additional groups and names
2022-09-24 22:35:20 -04:00
6f8205235f
ADDED: Add outline support to schematic PDF and PCB plot
2022-09-24 21:45:48 -04:00
1683e552f7
Add/fix some variable initializations
2022-09-25 00:48:38 +01:00
f6d0fb8eed
Fix copy/paste error.
2022-09-24 20:00:01 +01:00
7e71dc084c
Implement Mirror H/V for tracks and vias.
...
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
328cc27020
Add pad-recombining to FPEditor's Cleanup Graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12487
2022-09-24 19:34:06 +01:00
fdb97a46c1
Don't copy items in for loops when not needed
2022-09-24 03:46:06 +01:00
28f836ab5c
Fix overzealous string replacement
2022-09-23 10:56:58 +02:00
58b03b0a1c
Small optimizations.
2022-09-22 17:22:04 +00:00
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
f75266d130
Keep selection order in SCH->PCB cross-selection.
2022-09-22 11:43:37 +00:00
839d31d427
Only update properties from a "real" project.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6268
2022-09-22 10:14:08 +01:00
c44e54756a
search panel: fix a crash and a refresh issue after selecting a second item
...
at least on W10/msys2
2022-09-21 19:36:35 +02:00
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
25f1f7b0df
Fix a compil issue on GCC
2022-09-21 09:04:31 +02:00
5af00486c3
Set a default floating size for the search pane
...
aui panes unforunately get a default of 0,0 and no attempts to detect a size
2022-09-21 00:06:45 -04:00
ec25463fed
Allow multi-selecting from the search pane
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/12476
2022-09-20 23:58:49 -04:00
dc9909f83f
Show all on empty searches
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12478
2022-09-20 23:44:42 -04:00
30dbcbbcf5
Only search the current tab on events
2022-09-20 23:38:06 -04:00
1b962a1660
Expand zone info a little
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12479
2022-09-20 22:16:50 -04:00
35201eac52
Add textboxes to Text tab of search
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12477
2022-09-20 22:16:50 -04:00
728ef8a61c
Hide properties panel menu entry if flag isn't set
2022-09-20 21:48:38 -04:00
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
7f34586c7e
Allow text variable resolution through properties in drawing sheet text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12473
2022-09-20 15:28:05 +01:00
cf1a411a19
Allow net to be selected with mixed track & via selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12412
2022-09-20 11:37:13 +01:00
9b4eb91f12
Zone Fill performance enhancement
...
Don't wait until all zones are filled before tesselating fills.
Tesselation happens on a layer-by-layer basis, so once the zones' layers
are filled, we can tesselate them in parallel with the remaining fill
work
2022-09-19 11:53:50 -07:00
0295090135
Zone Fill performance for overlapping zones
...
When multiple zones overlap each other, we need to synchronize the
filling. This should not wait for all zones to try to fill before
restarting. Instead, zones that cannot be filled because the depend on
another zone finishing are immediately re-inserted into the fill queue.
2022-09-19 10:11:06 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
ca0c9f12e0
PCB Editor: Unroute Footprint
...
Also works on selected pads.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1955
2022-09-19 10:37:10 -04:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
1566bd8b14
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
2022-09-18 18:14:47 +01:00
57f8a248a5
Remove unused settings
2022-09-17 18:03:43 -04:00
97963a2bba
Better after base_units.cpp changes in python stuff.
...
Move an include to kicad.i
2022-09-17 11:21:48 +02:00
71bb7d63d9
Fix isses after base_units.cpp changes.
2022-09-17 10:56:56 +02:00
ece23d434b
Split up Double2Str to a format function to make its use case clear
2022-09-17 00:10:22 -04:00
1e0eca0916
Eyeball swig fix after the units changes
2022-09-16 22:31:52 -04:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
7a5829f8d6
Move IU2Mils
2022-09-16 21:09:27 -04:00
61e11d6896
Strip out Mils2Iu
2022-09-16 21:09:27 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
33f8161799
Merge in MM_PER_IU to EDA_IU_SCALE
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
8e361e8a15
Be more diligent about checking for zone file deps
...
The outline collision is relatively cheap (especially after filtering
bbox collisions) so check if a zone REALLY depends on another zone
before making it wait. Waiting for zones can really increase the total
fill time
2022-09-16 17:23:06 -07:00
Wayne Stambaugh
jean-pierre charras
Jeff Young
Seth Hillbrand
Alex
aris-kimi
Marek Roszko
Jon Evans
Mike Williams
Fabien Corona
Scott Hanson
Jonathan Haas
Ian McInerney