7556d7152f
Fix errant return and improve progress reporting.
2022-08-01 13:09:51 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
f2f04b1d20
Better progress reporting for thermal connections.
2022-08-01 13:09:51 +01:00
b0a9cea6f6
Better progress reporting, and don't report necks that don't have items.
...
Since we aren't searching zones (they aren't in the m_CopperItemRTreeCache)
this will drop all errors that are zone-only (which are better handled by
zone-min-width).
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
bf5e649e44
Fix log errors in new solder masking checking code.
2022-07-23 09:26:04 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
a2c002e1da
Improve solder mask aperture testing.
...
1) For solder mask apertures report both the aperture and both
exposed items.
2) Don't process solder mask apertures in footprints with the
"bridging allowed" flag set.
Fixes https://gitlab.com/kicad/code/kicad/issues/12064
2022-07-22 23:06:07 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
c7746fa000
Fix copy pasta error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11986
2022-07-08 17:44:36 -06:00
521b231873
Don't zero out width of shapes on Margin, only Edge_Cuts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11967
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
f611f9f5d3
Allow zone connection rules to target footprints.
...
If the pad is set to inherit and a rule targets its parent footprint,
then that rule should fire.
2022-07-08 17:27:05 -06:00
fa2e43f696
Reduce noise in board <-> library footprint tests.
2022-07-08 17:27:04 -06:00
7f9f37e507
Avoid double-caching FP zones
...
Leads to crashes/invalid data when multi-threading hits both at same
time
2022-07-05 20:07:18 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
a852286eb5
Cleanup compile warnings
2022-06-21 17:04:56 -07:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
4043dca613
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
2022-06-16 08:26:28 -07:00
5327b10064
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
5e80e2a421
58f553a9ca requires that cache be layer-sensitive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11814
2022-06-15 00:30:11 +01:00
d14fd5a9da
Fix logic error with silk overlap test.
2022-06-04 19:34:24 +01:00
8b75a32cfa
We only want "actual" shapes, not anything derived from SHAPE.
...
Also fixes a bug where GetParentFootprint would get confused by
groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/11741
2022-06-04 00:24:27 +01:00
d2a9cbe6e8
Use effective width for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11740
2022-06-03 23:27:10 +01:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
ecf6773f74
Remove dead code.
2022-05-07 21:10:04 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
f590dcf513
Fix a couple of typos.
2022-05-06 00:06:00 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
bf2566a44f
Post-process board min clearance rather than building it in to netclasses.
...
The later makes the diagnostic messages harder to decipher.
2022-05-03 13:39:14 +01:00
d192d3c31d
Better violation title for disabled layers check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11451
2022-04-25 09:39:49 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
e6684bf7c7
Add footprint checks to board-level DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11437
2022-04-23 11:34:18 +01:00
4525b1f085
More consistency in DRC error messages.
2022-04-23 09:39:34 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
819276bd98
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
(cherry picked from commit d0796399a2
2022-04-11 16:58:10 -07:00
82820d4b1c
Cleanup.
2022-04-09 20:39:35 +01:00
722b2588f4
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
2022-04-08 11:40:53 +01:00
a118249093
NPTHs obey HOLE_CLEARANCE, not CLEARANCE.
...
Also, plating thickness appears on both walls, so diameter is drill
plus 2X plating thickness.
2022-04-04 20:43:08 +01:00
f7cdc7af75
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
2022-04-02 15:12:42 +01:00
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
914e706023
Replace zone-with-no-pads test with isolated copper test.
...
The later is far more discriminating.
Fixes https://gitlab.com/kicad/code/kicad/issues/11009
2022-03-01 12:02:17 +00:00
79c7859052
Apply a19d9105f0 to zone case as well.
...
Also improves on the previous comments.
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-02-21 13:48:34 +00:00
86988225c3
Exclude some fab attrs from library parity check.
...
Also excludes zone outline hatching, which is just a visualization
property.
Fixes https://gitlab.com/kicad/code/kicad/issues/10903
2022-02-19 14:59:50 +00:00
a19d9105f0
Fix SolderBridge check to only check across multiple
...
We should not generate an error when overlapping a single copper element
with a soldermask that is not associated with copper.
Fixes https://gitlab.com/kicad/code/kicad/issues/10906
2022-02-18 11:47:28 -08:00
6f6cf995ba
Don't ask for layer of multi-layer item.
2022-02-18 14:53:10 +00:00
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
ce0233577b
Don't try to fetch layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
e09ecd8380
Don't ask for layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
ca56de7816
Show DRC overflows in both tab titles and number badges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10617
2022-02-09 17:04:32 +00:00
06e00c7957
Fix shadow variable compile warning in text DRC provider.
2022-02-08 09:26:12 -05:00
3b5474f190
Don't punt on TrueType char thickness; analyze it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
137edbe3f3
Add disclaimer for TrueType fonts to thickness test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
3c5ae6d317
Don't let zone cutout on different layer confuse us about intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-08 14:10:37 +00:00
091055fa1d
Don't count track as a pre-existing connection.
2022-02-08 14:10:37 +00:00
5ce559176d
Overhaul the font metrics calcs for overbar, italics and bboxes.
2022-02-07 17:36:40 +00:00
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
193dee11e8
Add missing null check PVS V595
2022-02-05 11:25:09 -05:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
63a3b1e20a
Estimate outline font thickness for DRC readability checks.
2022-02-01 12:01:04 +00:00
1f8c29c395
Coverity fixup.
2022-02-01 12:01:04 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
c01e2dcfec
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
(cherry picked from commit c2707f3cc0
2022-01-28 17:08:33 -08:00
29841ba315
Bring ERC & DRC dialogs into parity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9350
2022-01-22 22:27:41 +00:00
14006495d5
Angle cleanup.
2022-01-20 22:35:41 +00:00
038db715a3
Move zone hatch orientation to EDA_ANGLE.
2022-01-19 00:34:03 +00:00
Jeff Young
Seth Hillbrand
luz paz
Wayne Stambaugh
Marek Roszko