Take field name sizes and user preference line thickness into account
when calculating placement of the text fields of a hierarchical sheet on
the canvas.
The previous calculations contained some magic numbers which seem to
have been well suited to cases where line width is 8 and text size is
0.050. However, the text collided with the sheet outline as soon as text
size or line width was increased.
This commit has been evaluated with line widths ranging from 5 to 100
and text sizes ranging from 0.02 to 0.200. Also in combination with
characters such as qyg and ÅÄÖÜ in the file/sheet names.
(cherry picked from commit b1a60b2)
When drawing a hierarchical sheet symbol, the text line width for
"Sheet: ..." and "File: ..." are now clamped (limited).
Clamp_Text_PenSize() is used for the calculation.
Before, without the clamping, these text widths grew with the line width
preferences option. That resulted in characters cluttering up.
(cherry picked from commit b76407e)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
Also makes better use of space to significantly increase number
of markers shown.
Fixes: lp:1748676
* https://bugs.launchpad.net/kicad/+bug/1748676
(cherry picked from commit a1d8097)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Three instances of variables named "reference" shadow a typedef
within std::vector producing:
warning: declaration of ‘reference’ shadows a previous local [-Wshadow]
note: shadowed declaration is here
typedef typename _Alloc_traits::reference reference;
This patch works around by renaming "reference" to "schReference".
When parsing component names, we need to account for the possibility of
illegal characters (e.g. "/", ":") in the names from v4 libraries. They
are fixed internally by the cache parser but if we don't fix them
in the rescue routine, the symbol won't match it's cache name.
This standardizes all schematic illegal character routines into LIB_ID
Fixes: lp:1774774
* https://bugs.launchpad.net/kicad/+bug/1774774
For the path separator in full filename, the sheet filename from the dialog uses the Unix notation,
and the "old" sheet filename uses the default notation (it is the actual filename).
Therefore, on Windows, after closing the dialog, the filename was always seen as modified,
and the hierarchy was incorrectly modified (annotation cleared).
During the symbol library table implementation, the legal character
tests for the footprint library table were changed and the forward
slash '/' character became illegal. This change broke editing some
users footprint library tables that already had '/' in library table
nicknames. This change split the library nickname and library item
name illegal character tests.
Also sets the initial footprint to the current footprint when
doing a Choose Footprint from the Eeschema Edit Property
dialog.
Fixes: lp:1776126
* https://bugs.launchpad.net/kicad/+bug/1776126
Any errors in the dialog should be handled and, at worst, allowed to
redo. SPICE_VALUE throws KI_PARAM_ERROR, so we catch that explicitly.
Fixes: lp:1776051
* https://bugs.launchpad.net/kicad/+bug/1776051
This refactors the symbol field editor's checkbox state-saving code to
deal with multiple projects with disjoint field sets more consistently.
For instance, imagine I have a two projects
* Proj1 has fields A, B, C
* Proj2 has fields A, B, D
Under the old scheme, when I switch from one project to the other the
state of fields C and D will be forgotten. With the new approach,
however, they are retained.
Not to mention, the implementation is considerably simpler. Fixes
This makes it significantly easier to find a particular component when
using the field editor, as I often do for part selection.
Fixes: lp:1772169
* https://bugs.launchpad.net/kicad/+bug/1772169
There are a bunch of problems with event processing and closing
documents, etc., when enabled. See the bug report for more
info.
Fixes: lp:1774777
* https://bugs.launchpad.net/kicad/+bug/1774777
When you search for an item that exists on a separate sheet in the
schematic, the newly loaded schematic sheet needs to have the dangling
flags set so that we don't have a mess of non-connected "o" markers.
Clearing annotations should only clear the settings that can be set by
the matching annotate function. Even in components where the units are
functionally the same, the unit choice should be retained as there are
often other considerations when chosing the unit.
Fixes: lp:1769457
* https://bugs.launchpad.net/kicad/+bug/1769457
The splitter window can not be the parent to any additional windows.
If it acquires a child that persists past the lifetime of the splitter
window, we get a segfault.
Also hooks up the Python netlist reader to the descriptions so
that they appear correctly in BOMs. (The BOM generators used
to always get the root component's description rather than the
alias's description.)
Fixes: lp:1774358
* https://bugs.launchpad.net/kicad/+bug/1774358
std::invalid_argument does not work fine with translated strings as argument for message.
(the translated message is incorrectly or not displayed if it contains non ascii8 chars, at least on Windows).
KI_PARAM_ERROR can be throw-ed with a translatable/translated string (a wxString)
Empty project path is a valid case when eeschema is executed in
standalone mode without any file loaded.
There were no observed harmful consequences of running eeschema without
the project path set, but to stay safe the project specific
sym-lib-table load code is executed only when the project path is set.
In the scenario described in the bug report, the SCH_SCREEN current item
pointer stores an address of a stale object that had been deleted when
the symbol was reloaded. To prevent the crash, the current item pointer
is reset whenever a symbol is loaded.
Fixes: lp:1774296
* https://bugs.launchpad.net/kicad/+bug/1774296
Button "Toggle the search tree" from left toolbar of Symbol Library
Editor does not show actual state of visibility of the search tree
panel. State of this button (checked or unchecked) changes on clicking
only. Toggling panel visibility from menu does not make effect on tool
state.
Applied changes makes tool state (checkd/unchecked) synced with panel
state (shown/hidden).
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
1) Commit in-progress edits before closing preferences.
2) Handle default fields in Symbol Fields Editor.
3) Save state of checkboxes in Symbol Fields Editor.
The original algorithm picked the value from the last component having
non empty value for a given field, but the processing order was
dependent on the layout of the components in the memory. It means that
for each component, the field values could have been taken from any
unit, randomly.
The patch improves the algorithm, trying to get all values from the unit
with the lowest number and resorts to other units only when there are
field values left empty.
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
It was always replaced with space in a graphic text, but it should happens
only in non quoted texts
Now graphic texts containing ' ' or '~' or '"' are always quoted
(work fine with 4.0 version)
Fixes: lp:1771105
https://bugs.launchpad.net/kicad/+bug/1771105
Also fixes a bug where unannotated components would get references
of the form R-1 (because their reference number was -1).
Fixes: lp:1768814
* https://bugs.launchpad.net/kicad/+bug/1768814
Path keeping stack copes well with paths pointing outside the project
directory (e.g. "../path"). The so far used wxFileName::GetDirCount() and
wxFileName::RemoveLastDir() remove too many directories, as ".." is also
counted as a directory.
Fixes: lp:1769746
* https://bugs.launchpad.net/kicad/+bug/1769746
It happens only with option "Reset, but keep order of multi-unit parts, because the algo tried
to propagate the new reference to parts having the same old reference,
without testing if this old reference was duplicated.
Fixes: lp:1769250
https://bugs.launchpad.net/kicad/+bug/1769250
Both "Leave Sheet" and "Library Browser" menu entries were mapped to the
'L' key. Mapped the "Library Browser" entry to the 'B' key.
Fix "Show hidden pins" menu entry capitalization.
Map "Show Hidden Pins" to 'P' key and "Full Window Crosshair" to 'W' key.
Fixes lp:1768671
https://bugs.launchpad.net/kicad/+bug/1768671
This patch prevents fields with long text values from unreasonable
dialog resizing. It is basically commit f4eb63f8 applied to a
corresponding field editor dialog in the Symbol Editor.
Values generated by NETLIST_EXPORTER_PSPICE::GetSpiceFieldDefVal()
and the actual value that was stored in a netlist differed when a
component has multiple units.
Due to that, the Spice model editor dialog incorrectly recognized
"alternate node sequence" value as the default one and cleared it
when the dialog was closed.
Also changes Save Library and Save Library As to work off the
visible selection if there is one.
Also implements enablement for Save All Libraries.
Fixes: lp:1764081
* https://bugs.launchpad.net/kicad/+bug/1764081
This is particularly important when bulk adding (by director, etc.)
as otherwise the user might end up having to click OK to many
many error dialogs.
Fixes: lp:1764057
* https://bugs.launchpad.net/kicad/+bug/1764057
Code fixing Spice device names (prefixing reference with a character
corresponding to the assigned device model type) that was duplicated in
a few places has been moved to a function (NETLIST_EXPORTER_PSPICE::GetSpiceDevice()).
With uninitialized COMPONENT_TREE::m_menuActive there were cases when
application logic erroneously decided to fetch the current library name
from the right click menu selection, even though there was no menu
opened, so an empty string was returned. Empty library name is
equivalent to no library loaded, therefore the save button appeared
disabled.
Fixes: lp:1765937
* https://bugs.launchpad.net/kicad/+bug/1765937
When a relative sheet path was not in the project path or a subfolder
within the project path, the schematic path would be empty. Set the
base path to the project path when the schematic path is no within
the project path hierarchy.
When LIB_ALIAS is renamed, it validates the new name. In case the name
typed in the field edit dialog is invalid, there was a discrepancy
between the name used further in the code and the actual alias name.
Fixes: lp:1765375
* https://bugs.launchpad.net/kicad/+bug/1765375
The main purpose of the patch is to load libngspice from macOS bundle.
There are also some additional paths that could make Windows developers
easier.
Fixes: lp:1630675
* https://bugs.launchpad.net/kicad/+bug/1630675
The messages on sheet duplication are changed to reflect the action
perceived by the user when accepting/rejecting the change.
Annotation is also reset for duplicating sheets where maintaining
existing annotation would conflict with existing sheets.
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
Because the cache is broken, the rescue library was never created after missing library or change in lib.
This was due to the fact the symbol name inside the cache is broken, since commit a5844c9,
because all illegal chars in symbol name are replaced by '_'.
Unfortunately, in library cache, the ':' (illegal in usual libraries) is used to build the cached symbol name.
so in lib cache, symbol names were broken, making this lib useless.
this fix allows the ':' char in symbol name in lib.
Fixes: lp:1764166
https://bugs.launchpad.net/kicad/+bug/1764166
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
When updating toolbars make sure the events are coming from the
toolbar in question (and not the menus which share the same ID).
Fixes: lp:1763563
* https://bugs.launchpad.net/kicad/+bug/1763563
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
Nets assigned by power pins are weak, meaning they are valid
as long as there is nothing else attached to such pins. This patch
checks whether there are other wires or pins attached to a power pin
before placing a global net label.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Each named power input pin in Eagle creates an implicit connection to a
net with the name of the pin (e.g. GND, VCC). It is also done for the
units (gates in Eagle nomenclature) that have not been instantiated in
the schematics.
To emulate this behaviour in KiCad:
- Placed components are checked for power input pins, so they will have
global net labels attached to create the described implicit connections.
- As the components are placed, the remaining units of the symbol are
checked for power inputs to see if they need to be instantiated together
with global net labels.
Fixes: lp:1755191
* https://bugs.launchpad.net/kicad/+bug/1755191
Field Editor dialog calls LIB_EDIT::SetFields() that deletes the old
LIB_FIELD objects and creates new ones. If any of the old LIB_FIELD
objects had been selected before invoking the dialog, then one of the
update UI event handlers will crash trying to access the object.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Renaming a subsheet but keeping the filename should not present a
warning to the user. The was triggered due to comparing a
fully-qualified filename to a relative filename.
Fixes: lp:1744475
* https://bugs.launchpad.net/kicad/+bug/1744475
Eagle support net labels that are naming wires not directly connected to
the labels. In KiCad it is not possible, therefore such detached net
labels need to be moved, so they touch the corresponding wire.
The initial algorithm did not take into account that a moved net label
might be placed on a wire crossing, effectively shorting two nets. This
commit improves the placement algorithm by avoiding the wire crossing
points when placing a label.
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
With hash character starting the reference value, schematic components
are considered as virtual and therefore netlist updater do not warn about
an unsigned footprint anymore. This approach is useful to handle logos,
frames or other virtual Eagle components.
Fixes: lp:1756281
* https://bugs.launchpad.net/kicad/+bug/1756281
ngSpice frequently ends up a simulation with an error:
"Error: ngspice.dll cannot recover and awaits to be detached"
The only way forward is to reload the shared library and
reinitialize ngSpice.
Fixes: lp:1753101
* https://bugs.launchpad.net/kicad/+bug/1753101
Schematic components have illegal characters replaced during load,
leading to broken component-symbol links. To avoid this, library symbols
should have their names fixed in the same way.
Fixes: lp:1752419
* https://bugs.launchpad.net/kicad/+bug/1752419
Duplicate is handled like move/drag but shouldn't mark the original
items as moving. This prevents a redraw from drawing the original
items.
Fixes: lp:1750083
* https://bugs.launchpad.net/kicad/+bug/1750083
The backup code was designed for a project with all of the schematics
in the project folder which is not always the case. Fix the schematic
backup to keep the schematic folder structure in tact during backups.
Fixes lp:1751662
https://bugs.launchpad.net/kicad/+bug/1751662
Keep any Eeschema color except background a fraction off of true white
to ensure that BW printing shows the lines as black. Only the
background is allowed to be white in an Eeschema printout.
Fixes: lp:1662859
* https://bugs.launchpad.net/kicad/+bug/1662859
For some reason, when calling python and giving a full filename script, the last separator in the filename
must be '/', not '\'.
Otherwise the import command inside the script does not find files to import in the same folder as the script.
We cannot replace blindly '\' to '/' in command line because it does not work for file on a server (name starting by \\server_name\).
So the fix is just replacing one '\' in python script full filename.
This is not perfect, but at least it works for newly created plugin commands.
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
Currently, if a old label already containing a '/' (or a space) is edited, it is accepted,
but no new not allowed char can be added to the label.
(Previously, a sheet pin label was not filtered)
This also makes the dialog modeless so that one switch between
sheets while annotating to choose the base numbers for each
sheet (assuming they don't like the base number we pick because
of the order of the sheets).
Fixes: lp:1154131
* https://bugs.launchpad.net/kicad/+bug/1154131
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
Local net labels are preceded with sheetpath (even for single sheet
schematics it is '/') causing net name conflicts between schematics and
layout. It can be easily avoided by using exclusively global net
labels, at the cost having uglier schematics.
After Eagle project import, schematic and board netlists are inconsistent:
footprints do not have sheetpaths assigned, schematics are unannotated.
One can update netlist either by references or timestamps, but timestamps
are empty in pcbnew, and updating by reference must by preceded by
annotation which may lead to broken links between board and schematics
(Eagle does not require references to end with a number, so KiCad annotater
will add numbers in such cases).
To fix the problem, there is a two step netlist update:
- update by reference without the annotation step, to assign
correct sheetpaths to footprints
- update by timestamp, after symbols are annotated, in order to
update references in the board
Fixes: lp:1748502
* https://bugs.launchpad.net/kicad/+bug/1748502
Board update KiWay request may now contain options in the message
payload:
- "no-annotate": do not enforce annotation
- "quiet-annotate": annotate without displaying a dialog
- "by-reference": update netlist by reference, no dialog displayed
- "by-timestamp": update netlist by timestamp, no dialog displayed
Sheet file name paths were not being saved and restored properly under
certain conditions when walking the sheet hierarchy causing schematic
load errors.
Changed debugging output to use wxLogTrace left over from last fix.
Fixes lp:1748401
https://bugs.launchpad.net/kicad/+bug/1748401
Deleting lines can create new ones when old lines are merged as the
result of a delete operation. This checks that all items inside a
selection block are deleted before finishing.
Fixes: lp:1748907
* https://bugs.launchpad.net/kicad/+bug/1748907
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
Try as you might to keep them fresh, there's no gaurantee.
Instead, just treat them as weak references and search the
existing items for a pointer-value match.
This also allows us to remove some code which kept recycling
the search position back to the start ever time a replace
was done.
Fixes: lp:1559258
* https://bugs.launchpad.net/kicad/+bug/1559258
Extra labels to preserve eagle named nets feature are now placed at the
end of a wire segment instead of the middle of a wire. Prevents a label
being placed on crossing wires that are not connected by a junction
resulting in an incorrent netlist.
Many had already been fixed but weren't working on Mac because
of the DIALOG_SHIM hack (now fixed). Others hadn't been updated
yet. Also includes some cleanup for elipses in buttons and
layout.
Fixes: lp:1748506
* https://bugs.launchpad.net/kicad/+bug/1748506
File names can be reliable compared only after normalization. The
problem is the easiest to observe on Windows, where one can use slash or
backslash as path separator, so even though C:/file.txt and C:\file.txt
pointed to the same file - simple string comparison would indicate they
are different files.
Fixes: lp:1744724
* https://bugs.launchpad.net/kicad/+bug/1744724
1) don't call UI-level LIB_PIN routines when reading library --
not only are they a performance hit, they set the modified flag
too
2) limit progress dialog updating to 15 times a second (this
had crept back up to 31% of the time spent loading libraries)
Fixes: lp:1734773
* https://bugs.launchpad.net/kicad/+bug/1734773
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
1) Edit Symbol gets similar fix as Place Symbol
2) progress dialog updating reduced to once every 50ms
3) SearchText gets lazy normalization
4) TypeNames get lazy translation
5) default fieldNames get translated a single time per language change
These fixes reduce first-load-time of both Edit Symbol and Place Symbol
by about 2/3, and second-load-time of Edit Symbol to near-instantaneous.
Spice netlist exporter processes all texts on the exported schematic
sheet to find spice directives and include them in the output file.
By default it also added ".title KiCad schematic" in the first line, so
if there was another .title directive in the exported schematic sheet,
the generated file would contain two .title directives.
This patch looks for .title directive and when one is found - it uses
the specified title in the first line.
This commit aims at making the pin edit coupling easier to understand.
It renames the mode to 'synchronized pin edit', shortens the description
and inverts the logic to avoid double negation.
To make the code clearer, two items have their name changed to fit the
new description:
- m_editPinsSeparately -> m_syncPinEdit
- ID_LIBEDIT_EDIT_PIN_BY_PIN -> ID_LIBEDIT_SYNC_PIN_EDIT
This adds a set of conditions that will prevent a wire from being
automatically trimmed. Wires that are currently being moved or are
newly created or are explicitly avoided will not be removed. This also
adds a function to set a flag on items in a block.
Fixes: lp:1744632
* https://bugs.launchpad.net/kicad/+bug/1744632
Don't use wxFileName == operator when comparing cache file name. There
is a lot of overhead the wxFileName == operator that is not necessary
so just do a comparison with the original string used to create the
cache.
Rename GetPolyPoint() to BuildPolyPointsList(), because GetPolyPoint() looks like an accessor, but it is not an accessor.
(Using it as accessor can creates a *very long calculation time* for very basic access to polygon vertices)
Fixes: lp:1745050
https://bugs.launchpad.net/kicad/+bug/1745050
The alias list now displays the user model (multiple aliases *of*
a root part, rather than a collection of names *including* the
root part). This simplified the error detection logic, fixing
the first bug in the bug report.
Updating the part in the library is now done uniformly on OK
(which was the second bug in the bug report).
Fixes: lp:1744656
* https://bugs.launchpad.net/kicad/+bug/1744656
The crash happened when during rename operation, when the original part
buffer has been marked as deleted, but its memory was not yet freed. The
renamed part was still using the original SCH_SCREEN object, which was
freed together with the original part buffer.
The highlight colour on some platforms (OSX, for instance)
renders nearly invisible against a white background. However,
wxWidgets doesn't handle background colours on OSX and GTK+.
A separate commit to the new kicad/wxWidgets fork fixes OSX,
and we continue to use the old highlighting on GTK+
Fixes: lp:1741719
* https://bugs.launchpad.net/kicad/+bug/1741719
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
At least on Linux, if a null icon is used as icon in Pin Type column, other icons are not
displayed. So the workaround is to use a neutral icon when a specific icon cannot be used
(i.e. when pins are grouped)
Fixes: lp:1559542
https://bugs.launchpad.net/kicad/+bug/1559542
Jeff Young
Martin Aberg
Maciej Suminski
Carsten Schoenert
jean-pierre charras
John Beard
Seth Hillbrand
Wayne Stambaugh
Ben Gamari
Simon Richter
Damien Espitallier
Baranovskiy Konstantin
Marco Ciampa
Jon Evans
Marco Ciampa
Tomasz Wlostowski
hauptmech
Michael Kavanagh
Russell Oliver
Kristoffer Ödmark
Michael Geselbracht
Chris Pavlina
Martin Sivak
ludovic léau-mercier