877b4be8ee
cortexm: Restrict probing by using the ap_designer.
...
More designers need to be observed and reported by users and added.
Request users to send needed data.
2020-10-07 20:12:35 +02:00
91d1ef8bf6
target/stm32: Use t->idcode with probe.
2020-10-07 20:12:35 +02:00
44bfb62715
Adiv5: Print Designer/Partno when device is not recognized
...
t->idcode is now 16 bit.
2020-10-07 20:12:35 +02:00
c456fc7f61
adiv5: Store AP designer and partno in the AP structure.
2020-10-07 20:12:32 +02:00
159196c2ad
Cortexm: Remove forced_halt.
2020-10-07 20:11:33 +02:00
9bb2807706
adiv5/romtable: Prepare CortexM devices to read the ROMTABLE
...
It seems, writing to DHCSR fails silent when the device is sleeping.
Reading DHCS during sleep may return nonsense.
Repeated write may at some point catch the device running and succeed.
With devices sleeping for long time and running on faster clock the
chance for a successful hotplug gets smaller.
- Try hard to halt a sleeping device
- Prepare vector catch and enable all debug units by TRACENA
- Release reset
- Apply device specific fixes
-- STM32F7: Store old value of DBGMCU_CR, enable debug in sleep in
DBGMCU before reading PIDR and restore DBGMCU on detach.
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
2020-10-07 20:11:17 +02:00
a254bc6308
Fix icdi usb error https://github.com/blacksphere/blackmagic/issues/740 https://github.com/blacksphere/blackmagic/pull/748
2020-10-07 18:08:04 +02:00
ceaee2a11e
hosted: Hint about BMPs in bootloader mode.
2020-10-07 17:12:22 +02:00
dc8924a2bc
stm32h7: Don't tc_printf from flash functions ( #747 )
...
* stm32h7: Don't tc_printf from flash functions
Receving an 'O' packet while flashing confuses GDB and then
weird stuff happens.
* Replace tc_printf with DEBUG_WARN
2020-10-05 10:45:18 +02:00
9bba3165fb
swdptap: Turnaround immediate after a reading with parity.
...
Thanks to JojoS.
Probably mostly cosmetic, but is keeps the device from driving SWDIO
until the next commands.
2020-10-02 10:51:14 +02:00
4d18496a6f
hosted: Allow to disable high level commands for BMP.
...
Useful for tracking low level problems on native with hosted.
2020-10-01 15:49:21 +02:00
014abf6cc9
adiv5.c: Reduce number of errors if reading cidr fails.
2020-10-01 15:33:28 +02:00
be40d2b851
adiv5: Check Debug Base Address early
...
Reduces printout when scanning the romtable
2020-10-01 15:22:17 +02:00
747336e927
f4discovery: Slow done JTAG pin slew rate to avoid ringing #742
2020-10-01 15:06:16 +02:00
38bc5bbf82
Add LPC546xx support #741 #553
2020-09-30 12:56:53 +02:00
2fdd94adeb
STM32F7: Add another missing Arch ID.
2020-09-24 16:20:34 +02:00
0ae65cc10f
src/Makefile: Fix version.h generation.
...
It seems, some git behaviour change got by unnoticed.
2020-09-22 19:02:26 +02:00
61d919c1ac
libftdi: Remove no longer needed workaround for travis CI.
2020-09-20 14:10:37 +02:00
77231e8972
serial_no: Fix error with "mon trace" #732
...
launchpad-icdi: Allow to set a serial number with make
2020-09-20 13:23:52 +02:00
bdb351a6ea
adiv5_swdp: On ACK_FAULT, error() and try again once #731
...
when writing CSW.
2020-09-18 20:07:32 +02:00
a4a934f461
Add comments for hardware revision of v2.1
2020-09-17 11:54:19 +02:00
75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
120b3134bb
Add SAM4SD32C/B support.
2020-09-07 17:36:15 +02:00
8289862b55
gdb: Reset flash_mode with when erase or flash fails.
...
Thanks to Dave Marples <dave@marples.net>, extracted from #607
2020-09-04 15:17:29 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
8a2bce26f2
Hosted: Fix memory leak when platform_swdptap_init fails.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
f65afb1588
Use correct IAP entry address for LPC84x
2020-08-14 20:00:18 +02:00
dd74ec8e6f
stlinkv2: Detect fail mem_read on jtag too.
2020-08-05 16:20:52 +02:00
805cfbdcb5
Build hosted for widows with hidapi static linked.
2020-08-03 18:59:50 +02:00
fca8593d92
serial_win: Find BMP comport by serial number.
2020-08-03 18:59:50 +02:00
3eb51ce94f
serial_win.c: Copy the enough of the device name.
2020-08-01 14:00:17 +02:00
11217f8a45
serial_win: GDB needs to handle DTR.
2020-08-01 14:00:17 +02:00
71e9d78210
adiv5.c: Add another ARCH_ID found STM32F205.
2020-08-01 14:00:17 +02:00
1b12e407fd
adiv5: Add missing arch identifiers for Cortex-M7 ETM.
2020-07-31 11:53:15 +02:00
71e5b4d3cb
hosted/stlinkv2.c: Fix bug introduced with #703
2020-07-29 13:42:07 +02:00
72387164eb
hosted/stlinkv2.c: Handle AP_WAIT error when switching to SWD
2020-07-29 12:22:18 +02:00
a392480631
hosted/stlinkv2.c: Use V2 API to read coreid.
2020-07-29 12:22:18 +02:00
696daa8352
adiv5: fix debug print of dev_type
...
Since dev_type is an 8 bit unsigned integer, use the PRIx8 macro instead
of PRIx32.
2020-07-29 11:32:24 +02:00
64cf30e4cd
Rework/update/add Readme.md in the platforms directories.
2020-07-29 10:32:49 +02:00
726d4b4496
adiv5.c: Add missing DEVTYPE and ARCHID to some existing PIDRs(#698,#699)
...
Probably more additions are needed.
2020-07-14 16:26:32 +02:00
52bfe538e3
cdcacm.c: Set bMaxPacketSize0 to 32 ( #693 , #697 )
...
Smaller bMaxPacketSize0 resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
2020-07-14 15:57:03 +02:00
09ceaea70f
adiv5_swdp: Fix another memory leak.
2020-07-14 15:02:13 +02:00
2ae62433d2
Merge pull request #690 from themadinventor/arm_v8m
...
Add ROM table support for Cortex-M33 and Cortex-M23
2020-07-13 10:56:03 +02:00
a673efc26b
Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux
2020-07-12 23:14:19 +02:00
7ebb94d134
cortexm: Add comment on CPUID register
2020-07-12 22:54:39 +02:00
4391851f4d
adiv5: Change component descriptions from MTB to Micro Trace Buffer for consistency
2020-07-12 22:29:04 +02:00
0aadd0abce
Adiv6: Add comment on DEVTYPE and ARCHID fields with references
2020-07-12 22:27:46 +02:00
fcd945a529
cortexm: Read CPUID to identify core version
2020-07-12 12:08:22 +02:00
39a20d78ff
v8m: only check relevant bits in DHCSR when polling in cortexm_forced_halt
2020-07-12 12:07:12 +02:00
a35e9c8e5c
Adiv6: Read DEVTYPE and ARCHID to identify Cortex-M23 and Cortex-M33 debug components
2020-07-12 12:00:31 +02:00
661f78033a
stm32f1: Add F1 XL with dual bank handling,
2020-07-08 14:31:58 +02:00
fc6ca5bc06
Remote: Add procedure to test if high-level remote functions are available
...
Removes need for updated version string.
2020-07-08 14:15:35 +02:00
bfda64c656
stlink: Remove unused double defined variable "running_status"( #683 )
2020-07-02 19:44:31 +02:00
85d35b75ce
libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination.
2020-07-02 14:56:10 +02:00
a4cdd6b310
hosted: Report missing USB access rights only if no debugger found.
2020-06-07 16:29:19 +02:00
eabd69dcdb
Adiv5: Protect DBG/SYSTEM Power-Up request with timeout too.
...
CMSIS-DAP without connected target looped infinite in that situation.
2020-06-07 13:14:32 +02:00
e35025d214
CMSIS_DAP: Warn when hidapi-libusb is not found.
2020-06-06 15:28:53 +02:00
5097a23196
jlink: Fix wrong sized array.
2020-06-06 15:28:53 +02:00
4ede113ca7
hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py
...
This allows "make all_platforms" to succeed on python3 only systems.
2020-06-05 16:23:28 +02:00
aabd07738e
cl_utils: Use start of flash in memory map as default flash start.
2020-06-05 14:59:30 +02:00
425002a38f
hosted: Add -l argument to list only available debuggers and exit.
2020-06-05 14:59:30 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
9ade8b24f7
hosted: Add Readme.md
2020-06-05 14:59:30 +02:00
4698a26bab
common/swdptap: Slight speed increase and better setup time for write.
2020-06-05 14:59:30 +02:00
64f3dff8a8
PC-Hosted: Better debug output.
2020-06-05 14:59:30 +02:00
b06c0ba8d5
bmp_remote: Use high level functions.
...
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
2020-06-05 14:59:30 +02:00
921c23eb74
serial_unix: Return instead of exit in case of error.
2020-06-05 14:59:30 +02:00
ef558eebb8
CMSIS-DAP support.
...
Thanks to edbg, pyocd and openocd for code and ideas.
2020-06-05 14:59:30 +02:00
4ba6afed28
Add jlink pc-hosted platform.
2020-06-05 14:59:30 +02:00
efce2ae892
Do not compile jtagtap and swdptap when not needed.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
Uwe Bonnes
David A. Aguirre Morales
Gareth McMullin
Eivind Alexander Bergem
jxltom
Raghu
Damien Merenne
Matthew Skolaut
David Lawrence
Francesco Valla
Aled Cuda
Fredrik Ahlberg
Valmantas Paliksa