7dc18768c4
Support erasing + flashing the User Information Configuration Registers (UICRs)
2014-06-11 13:43:59 +01:00
380f128d0a
Added monitor commands for reading various nRF51 device parameters
2014-06-11 13:39:06 +01:00
none
3543e560af
Fix lpc11xx magic number programming when chunks overlap
...
In the case where the vectors are in a separate section smaller than
the chunksize, the lpc11xx magic number calculation could generate an
incorrect value.
2014-06-10 21:23:17 -07:00
c1b1d45155
TRST only exists on hardware version 0
2014-05-28 12:45:21 +01:00
42e41edfa1
Target power option is only for versions > 0
2014-05-28 12:33:43 +01:00
c9089f5851
Added monitor option to toggle target power
2014-05-28 12:25:48 +01:00
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
8ba0265383
Merge pull request #44 from miek/nrf51
...
Nordic nRF51 series support
2014-05-01 15:43:59 -07:00
34d0f64529
Nordic nRF51 series support
2014-05-01 15:09:59 +01:00
3077472620
Unwind hardfaults in dual-stack mode.
2014-03-31 20:58:06 +13:00
096e1b32c6
Add support for LPC11U14 (tested) and related U-series microcontrollers (untested).
2014-03-08 19:07:50 +13:00
cbb85b6a45
LPC812 support
2014-03-08 18:58:39 +13:00
12aeaad441
[locm3] Use the new clock-enabling mechanisms in locm3.
2014-02-13 18:21:16 +01:00
690e99c6b2
Fix the STK_CTRL to the STK_CSR library change.
2014-02-13 17:52:09 +01:00
e5624a7e6d
Added support for the LPC1115FBD48/303 (ID determined experimentally)
2014-01-29 08:02:04 +08:00
d27c50c601
Add STM32F03X and STM32F07X handling.
2014-01-24 05:03:38 +08:00
0c9d5d8166
Add dfu bootloader update application and use absolute delay for stlink
...
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30 )
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
2014-01-24 04:59:09 +08:00
ac0fc8216a
Merge pull request #35 from burgrp/upstream
...
Fix in checksum calculation condition
2014-01-23 10:52:09 -08:00
eb2f2afa9a
Merge pull request #32 from aibara/lpc43xx_updates
...
Lpc43xx target support updates
2014-01-23 10:51:46 -08:00
a7fd985cfc
Merge pull request #31 from BuFran/pulls/libopencm3_update
...
Update to the newest libopencm3
2014-01-23 10:51:09 -08:00
ce17cc2e2b
Fix in checksum calculation condition
2014-01-22 10:35:35 +01:00
01244fc84d
LPC43XX: Force target to use internal clock.
...
Without this, flash write timing might be incorrect.
2014-01-10 13:24:25 -08:00
2b798fa8fc
LPC43XX: Make the chunk_offset logic more explicit.
2014-01-10 13:24:25 -08:00
487252150f
LPC: Cleanup regs_size (in bytes).
...
Also use sizeof() to make it clear why we multiple and divide by 4.
2014-01-10 13:24:25 -08:00
df9c19f071
LPC43XX: Remove type cast for erase function
2014-01-10 13:24:25 -08:00
911af3b836
LPC43XX: Add reset command to do a system reset (but not the debug).
2014-01-10 13:24:25 -08:00
813622b1b6
LPC43XX: Add mkboot target command; dont make banks bootable by default.
...
This used to be done transparently in the write step, however that
breaks the 'verify' command. This is also more flexible for cases
where you want to write a flash bank without ever intending it to
be bootable.
2014-01-10 13:24:25 -08:00
29c7846612
LPC43XX: Make sure to align target struct to word alignment
2014-01-10 13:24:25 -08:00
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
8835df1822
Merge remote-tracking branch 'origin/usbuart_highrate'
2013-12-04 16:16:08 +13:00
42570efaf8
Revert "STM32F4: Add handling of second bank and dual boot devices."
...
This reverts commit 536482f804
2013-10-22 07:48:06 +08:00
09fbe783c5
f4discovery: Limit clock to 48 MHz and stack 24 kiByte so that code can be compiled unchanged for F401Discovery too.
...
TODO: Bump clk up to 84 MHz as soon as libopencm3 supports that speed.
2013-10-22 07:26:35 +08:00
536482f804
STM32F4: Add handling of second bank and dual boot devices.
2013-10-22 07:21:35 +08:00
cbd73cfb8f
STM32F4: Recognize F401.
2013-10-22 07:21:35 +08:00
5aa802969b
stlink: Give the NRST check more time as otherwise some L1 discovery board stayed in the bootloader.
2013-10-22 07:18:09 +08:00
086f3565f0
stm32f1: Fix handling of option byte write. Write needs to happend on erased option bytes.
2013-10-20 16:14:25 +02:00
15e529a43a
stm32f1.c: On a read protected device, deny any other option action than erase.
...
Otherwise the first option action triggers an error, inhibiting further option
actions.
2013-10-20 16:14:19 +02:00
c395c6f73a
Configure SRST output as open-drain for BMP Mini hardware
2013-10-05 13:14:03 +08:00
3cce6f472c
Add support for the SYS_WRITEC semihosting operation.
...
This is implemented in the same manner as QEMU semihosting
support, specifically, a SYS_WRITEC results in a single
character write to STDERR.
2013-10-05 13:14:03 +08:00
b8f9a2ed4b
Bugfix: Always apply the vector table magic number correctly.
...
Previously when the flash write length was less than the Chunk size the 2nd chunk write would re-calculate and apply an incorrect magic number
2013-10-05 13:14:03 +08:00
40820a2354
Added internal pull-up to PWR_BR.
...
o Prevent probe from inadvertently powering target. If PWR_BR is
allowed to float, the gate on Q1 (blackmagic_mini) will tend to be
close enough to zero to turn the transistor on. We activate the
internal pull-up on this IO pin to force the transistor off.
2013-10-05 13:14:03 +08:00
e5d253bf81
Merge pull request #24 from richardeoin/master
...
New contrib board
2013-10-04 21:33:39 -07:00
e67192348f
FIX: usbd_init compatibility fix
...
Updated compatibility with libopencm3 commit 113e5c22e6390ba072148315e83a5faa5ff7ce86
2013-10-05 12:23:23 +08:00
c857165c12
FIX: FLASH_* collision with libopencm3 definitions
...
Resolve collision to FLASH_* from the libopencm3 by adding STM32F1_ prefix to the L1's
2013-10-05 12:23:23 +08:00
c28350f242
FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new library
...
The use of u8, u16, u32 has been deprecated in libopencm3.
Update it with standard uint8_t, uint16_t, uint32_t types
2013-10-05 12:23:23 +08:00
f1584b266b
[BUILD] Don't throw error on already cleaned output
2013-10-05 12:23:23 +08:00
78464c8562
[LIB] Updated to newest libopencm3
2013-10-05 12:23:23 +08:00
e5e67e5740
Made assembly notes titles
2013-09-04 22:07:08 +01:00
c04ccf3ccc
Tided up README, added note about board being proven
2013-09-04 22:05:14 +01:00
Richard Eoin Meadows
none
Gareth McMullin
Mike
Jared Boone
Frantisek Burian
bon@elektron.ikp.physik.tu-darmstadt.de
Pavel Burgr
Allen Ibara
Gareth McMullin
Michael Tharp
Benno Leslie
Marc Singer