805464db23
Fix redefinition of io function
...
Now it should work fine with any gcc version. Old one produces error
like in #657
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-10 10:58:03 +02:00
9b939f4a3a
stm32f4: Fix option byte handling ( #654 )
...
Option bytes are not accessible with level 1 protection, so
Use FLASH_OPTCR(x)
Fix crash with "mon opt write xxxx"
Handle option manipulation better when HW Watchdog fuse is set
Allow abbreviated "mon option x<yyy>" commands
2020-05-05 12:52:32 +02:00
923949d5dd
Fixed variable/function name clash building on Windows
2020-05-03 15:45:31 +02:00
9f8c7be360
semihosting
2020-05-02 12:55:29 +02:00
d63e870e82
cdcacm: Fix UART interface OUT endpoint MPS in descriptor.
...
3e3e450Fixes #538
2020-05-01 12:39:40 +02:00
08bb4d5775
pc-hosted: Make JTAG work.
2020-04-27 20:30:51 +02:00
8851504a41
new semihosting commands
2020-04-23 09:43:46 +02:00
ada17ada23
stm32f4/7: Always use largest flashsize for device family ( #633 , #635 , #644 )
...
Do not care for the FLASHSIZE register. Leave it up to the user to abuse
flash area the ST did not announce.
2020-04-21 17:04:07 +02:00
164eb43f00
NRF5: Do not reset target options.
2020-04-14 19:01:43 +02:00
bea8436561
NRF5: Always set CORTEXM_TOPT_INHIBIT_SRST( #230 )
...
The problem also happens with NRF52840. Set CORTEXM_TOPT_INHIBIT_SRST
for all NRF5 device.
People should be more persistent!
2020-04-14 18:11:23 +02:00
d1468530bd
add basic support for LPC11U68 (and maybe LPC11U68)
2020-04-06 23:36:49 +02:00
846dadcc39
lmi: add support for TM4C1294NCPDT
2020-04-03 19:42:24 +02:00
58a8571d5b
stlink: Print Target voltage
...
This adds about 600 bytes.
2020-04-03 16:19:20 +02:00
8a9980cd06
pc/serial_unix: bump device path buffer size to 4096 bytes
...
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
2020-04-03 11:05:11 +02:00
b4ab9f328e
pc-hosted: Put serial handling in own files for unix and implement for windows.
...
- If host provided /dev/serial/by-id, device must not be given and
multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
2020-03-31 17:02:56 +02:00
18ae2bb50d
cl_utils.c: Include <windows.h> for windows builds that work on files.
2020-03-31 17:02:56 +02:00
1a0cee4e9d
pc-hosted: Clean up Makefile.inc.
2020-03-31 17:02:56 +02:00
bd73adf9c7
bmp/pc platforms: Deduplicate code.
2020-03-31 17:02:56 +02:00
9ca401497c
stm32/timing_stm32.c: Remove fixed constants and direct SCB access
2020-03-31 16:54:04 +02:00
c4d7232223
Export function to read out PIDR and use for samd and samx5x.
2020-03-26 19:05:57 +01:00
a0e42e229b
Make more things static.
...
No functional change intendend.
2020-03-26 18:44:19 +01:00
eca3a8dd8f
pc-stlinkv2: Make stlink_usb_get_rw_status static and allow to suppress errors
...
This helps to not overflow the console.
2020-03-26 17:56:12 +01:00
91d7656d86
stlink/bootloader: Really allow to detach.
...
- To reenumerate, rcc_periph_reset_pulse(RST_USB) seems enough.
- Document bootloader entry and exit behaviour of ST-LINK V2
- Document bootloader entry on ST-LINK V2-1
2020-03-26 17:15:32 +01:00
890b494290
pc-stlinkv2: Update README.md
2020-03-26 12:21:22 +01:00
effd43ce38
Harden cortexm_reset() and remove double reset( #601 )
...
Thanks to Dave Marples <dave@marples.net> for input.
- Issue only one reset. Start with SRST. Only if not seen, use SYSRESETREQ
- Wait for release of DHCSR_S_RESET_ST before issuing more commands
- Add timeout to catch reset line stuck low
- Remove AP errors
2020-03-25 11:22:14 +01:00
2e185ba578
BMP/PC: Allow to compile with mingw64 ( #615 )
...
__USE_MINGW_ANSI_STDIO 1 must be set befor any windows specific included.
2020-03-24 17:59:13 +01:00
2b76ec0ea3
dfucore: Reject erase outside the allowed range
...
An illegal erase request may get emitted as the DFU program may erase
first. Checking before flashing is not enough.
2020-03-22 16:38:54 +01:00
a7efe7cc14
cl-utils: Display targets found.
...
+ other small changes in DEBUG output.
2020-03-10 17:34:30 +01:00
65cb886bb6
Export connect_under_reset.
2020-03-10 11:44:53 +01:00
2065c70888
adiv5: Split PRIx64 into two PRIx32 as nanolib does not support PRIx64.
2020-03-10 10:56:42 +01:00
75186f7d50
ADIv5: More CoreSight device decoding:
...
- MTB-M0+ (Simple Execution Trace)
- M33: Devices need finer decoding (DEVTYPE at offset 0xfcc)
2020-03-08 22:37:59 +01:00
c7e7bd61b6
stlink: Do not wait for the reaction on the reset line.
...
pc-hosted will abort, if the reset line is held externally to some value.
As assert is either driven or driven open drain, we can assume assert
immediate. For deassert, logic levels differences between the debugger and
the debuggee may apply and other ways to check the result are needed, like
CORTEXM_DHCSR_S_RESET_ST.
2020-03-08 16:27:03 +01:00
e48d9ebc92
cl_utils: Allow to connect under reset.
2020-03-06 23:15:56 +01:00
919d9320fd
Remove unrelated files.
2020-03-06 19:33:20 +01:00
05dc2e239e
pc-hosted: Disable TPWR when blackmagic command line interaction terminates.
2020-03-06 17:16:33 +01:00
c94a03af48
STM32F1 High density devices DFU support( #587 )
2020-03-05 19:58:55 +01:00
288620551f
adiv5: Print out SYSROM PIDR.
...
We need to know more about what devices indicate proper PIDR and what
devices fail to do so.
2020-03-04 19:02:07 +01:00
8c959defca
efm32: Make local functions static.
2020-03-04 18:44:40 +01:00
13b9fe1efc
cl_utils: There is no need for a (dummy) target controller.
...
Fix for #593 .
2020-03-04 16:57:05 +01:00
03d84d0d5c
command line tools: Allow to set power.
2020-02-20 12:12:26 +01:00
7a595ead25
fixup F103x8 flash size before build dfu iface string
...
we handle F103x8 as F103xB with 128k flash
2020-01-22 16:01:39 +01:00
45fb12f9b6
cl-utils: Care for -j (JTAG) argument in test mode.
2020-01-21 11:49:45 +01:00
1a1cabc90b
Remove explicit include of rcc.h and allow common file to steer the right file
...
Clean up DFU files with MCU explicit includes
2020-01-14 00:09:20 +01:00
2137e775a4
stlink: update docs on how ti reflash BMP back to STLink original firmware ( #572 )
...
* stlink: update docs on how ti reflash BMP back to STLink original firmware
* stlink: specify v2 in docs on reflashing back
2020-01-11 16:52:22 +01:00
ee553c9a50
Corrected error checking for socket functions ( #577 )
2020-01-11 16:47:02 +01:00
c3a3f7737f
Hosted: Allow command line interaction.
2019-12-13 14:59:42 +01:00
ee316431f5
stlink for st-bootloader: Reset with platform_request_boot()
...
Both V2 and V21 switch to (ST) bootloader with powered reset.
2019-12-13 14:59:42 +01:00
470c8e8cf1
target_flash_erase: Do not crash when requesting erase of unavailable flash.
...
Allow to erase from command line.
2019-12-13 14:59:42 +01:00
b9eb467ecf
Command line: Restrict verify to length of binary file.
2019-12-13 14:59:42 +01:00
269d38ce65
cl_utils: Allow to issue reset.
...
Issue reset only when flashing or when reset was requested.
2019-12-13 14:59:42 +01:00
da5a0cd3f5
Infrastructure for command line interface to target
...
- Program, read and verify flash
- Test mode: Probe and attach to device and exit
2019-12-08 16:43:19 +01:00
ab396f9745
Allow %z specifier in windows builds. Supercedes #562 .
2019-12-08 16:43:19 +01:00
1bef51e145
adiv5: Abort scanning APs after 8 void APs.
2019-12-08 16:43:19 +01:00
6d01c3c55b
stlinkv2: Propagate AP errors
...
Needed when reading some memory region of unknown size.
2019-12-08 16:43:19 +01:00
bdd76de517
Erase: Fix endless erase when erase-area did not end on (page|block) boarder.
2019-12-08 16:43:19 +01:00
25d24e5c34
efm32: Allow to compile with -Og.
2019-12-08 16:43:19 +01:00
5943552a6b
[efm32] Probe for the EFM32 Authentication Access Port (AAP)
...
Supported functionality through this AP:
* Issuing a DEVICEERASE command
2019-12-08 16:21:02 +01:00
260fc88d8f
[efm32] Add command to set and print bootloader enable status
...
This is a bit in the Lock Bit (LB) flash page, so it can only be
cleared by this routine
2019-12-08 16:17:02 +01:00
7f0d5febc3
[efm32] Print MSC Interrupt Flags to DEBUG after each flash write
2019-12-08 16:16:55 +01:00
e85df763b7
[efm32] add new devices PG12B, JG12B, GG11B, TG11B, GG12B
...
Rework MSC layout check
2019-12-08 15:55:12 +01:00
f89542c79f
Merge pull request #203 from dlaw/master
...
Add LPC11xx command to read out unique ID from target. Restore Ram and registers after call.
2019-12-08 15:45:49 +01:00
5ec12e4103
Support arbitrary bit counts jtagtap_tdi_tdo_seq pc-hosted
2019-12-08 14:34:35 +01:00
d42477ebc5
Fix infinite loop in jtagtap_tdi_tdo_seq
2019-12-08 14:34:35 +01:00
f10ccfd83e
f4discovery: Fix error with GCC9 being more picky with sizes.
2019-12-05 19:36:05 +01:00
8a07f44435
Add support for the kinetis KL16Zxx devices. Tested on KL16Z128VFM4 custom hardware
2019-11-21 20:37:13 +01:00
1924aa4999
Make baudrate parameter of traceswo command mandatory for stlink/swlink, and superfluous on other platforms; change help message accordingly.
2019-11-19 20:20:13 +01:00
e7e34600a4
lpc11: Only print Idcode if not zero and not yet handled.
...
Otherwise for all Cortex-M not yet handled this LPC messages appears.
2019-11-17 13:24:39 +01:00
9198c951bb
Reduce flash space required for SAM D51/E5x driver
...
* Reuse functions that are common with the SAM D1x/D2x driver
* Only include the mbist and write8/16/32 user commands if
SAMX5X_EXTRA_CMDS is defined
2019-11-17 12:45:49 +01:00
d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
5a05cedd7d
pc-hosted/jtagtap.c: Handle DO as bytes (PR #552 )
...
Fixes #540/#542
2019-11-10 17:36:58 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
04d9749f25
Makefile: Publish DFU binaries with the daily build. ( #549 )
...
Fixes #548 .
2019-10-28 16:37:41 +01:00
76f9a6ad42
stm32: Portability changes.
2019-10-20 22:20:06 +02:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
c6f43cf23f
Stlinkv2: Always call stlink_leave_state() first.
...
V2 devices after power on are in DFU mode. It is needed to leave DFU before
doing anything else.
2019-10-19 20:57:26 +02:00
58febdff79
Fixed tokenization of gdb monitor commands.
2019-10-19 13:25:26 +02:00
2eef202ee1
Use pkg-config to get CFLAGS & LDFLAGS for libftdi1
...
Pull request #535
2019-10-14 19:22:53 +02:00
0aedff6623
Set the accepted to socket to be blocking as that is what the code expects.
...
This is necessary on OSX (and probably BSDs) where they default to non blocking which causes recv() to return -1 with errno set to EAGAIN.
2019-10-14 12:45:10 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
Alexey 'Alexxy' Shvetsov
Uwe Bonnes
Sid Price
Koen De Vleeschauwer
Vegard Storheil Eriksen
mean
Francesco Valla
Extreme kefir
zvova7890
Ondrej Mikle
Sid Price
Richard Meadows
Roland Ruckerbauer
Artur Maciuszonek
Thiadmer Riemersma
Ken Healy
Kirill Zhumarin
dpslwk
Daniel O'Connor
Thomas Bénéteau
Dave Marples
Gareth McMullin
