da5a0cd3f5
Infrastructure for command line interface to target
...
- Program, read and verify flash
- Test mode: Probe and attach to device and exit
2019-12-08 16:43:19 +01:00
ab396f9745
Allow %z specifier in windows builds. Supercedes #562 .
2019-12-08 16:43:19 +01:00
1bef51e145
adiv5: Abort scanning APs after 8 void APs.
2019-12-08 16:43:19 +01:00
6d01c3c55b
stlinkv2: Propagate AP errors
...
Needed when reading some memory region of unknown size.
2019-12-08 16:43:19 +01:00
bdd76de517
Erase: Fix endless erase when erase-area did not end on (page|block) boarder.
2019-12-08 16:43:19 +01:00
25d24e5c34
efm32: Allow to compile with -Og.
2019-12-08 16:43:19 +01:00
5943552a6b
[efm32] Probe for the EFM32 Authentication Access Port (AAP)
...
Supported functionality through this AP:
* Issuing a DEVICEERASE command
2019-12-08 16:21:02 +01:00
260fc88d8f
[efm32] Add command to set and print bootloader enable status
...
This is a bit in the Lock Bit (LB) flash page, so it can only be
cleared by this routine
2019-12-08 16:17:02 +01:00
7f0d5febc3
[efm32] Print MSC Interrupt Flags to DEBUG after each flash write
2019-12-08 16:16:55 +01:00
e85df763b7
[efm32] add new devices PG12B, JG12B, GG11B, TG11B, GG12B
...
Rework MSC layout check
2019-12-08 15:55:12 +01:00
f89542c79f
Merge pull request #203 from dlaw/master
...
Add LPC11xx command to read out unique ID from target. Restore Ram and registers after call.
2019-12-08 15:45:49 +01:00
5ec12e4103
Support arbitrary bit counts jtagtap_tdi_tdo_seq pc-hosted
2019-12-08 14:34:35 +01:00
d42477ebc5
Fix infinite loop in jtagtap_tdi_tdo_seq
2019-12-08 14:34:35 +01:00
f10ccfd83e
f4discovery: Fix error with GCC9 being more picky with sizes.
2019-12-05 19:36:05 +01:00
8a07f44435
Add support for the kinetis KL16Zxx devices. Tested on KL16Z128VFM4 custom hardware
2019-11-21 20:37:13 +01:00
1924aa4999
Make baudrate parameter of traceswo command mandatory for stlink/swlink, and superfluous on other platforms; change help message accordingly.
2019-11-19 20:20:13 +01:00
e7e34600a4
lpc11: Only print Idcode if not zero and not yet handled.
...
Otherwise for all Cortex-M not yet handled this LPC messages appears.
2019-11-17 13:24:39 +01:00
9198c951bb
Reduce flash space required for SAM D51/E5x driver
...
* Reuse functions that are common with the SAM D1x/D2x driver
* Only include the mbist and write8/16/32 user commands if
SAMX5X_EXTRA_CMDS is defined
2019-11-17 12:45:49 +01:00
d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
5a05cedd7d
pc-hosted/jtagtap.c: Handle DO as bytes (PR #552 )
...
Fixes #540/#542
2019-11-10 17:36:58 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
04d9749f25
Makefile: Publish DFU binaries with the daily build. ( #549 )
...
Fixes #548 .
2019-10-28 16:37:41 +01:00
76f9a6ad42
stm32: Portability changes.
2019-10-20 22:20:06 +02:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
c6f43cf23f
Stlinkv2: Always call stlink_leave_state() first.
...
V2 devices after power on are in DFU mode. It is needed to leave DFU before
doing anything else.
2019-10-19 20:57:26 +02:00
58febdff79
Fixed tokenization of gdb monitor commands.
2019-10-19 13:25:26 +02:00
2eef202ee1
Use pkg-config to get CFLAGS & LDFLAGS for libftdi1
...
Pull request #535
2019-10-14 19:22:53 +02:00
0aedff6623
Set the accepted to socket to be blocking as that is what the code expects.
...
This is necessary on OSX (and probably BSDs) where they default to non blocking which causes recv() to return -1 with errno set to EAGAIN.
2019-10-14 12:45:10 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
1d868bfffb
pc-stlinkv2: Detect stlink detach.
...
As libusb has no real async callback, we need to call libusb_handle_events()
in different places. While waiting for the gdb connection, we set the
socket to non-blocking and check additional for usb events in that loop. That
way, detach is also detected while waiting for connection. With debugger
attached, SET_IDLE_STATE ist missused for checking for usb events.
2019-09-01 12:19:14 +02:00
6f1cae9203
pc-stlinkv2: Wait for device attach.
2019-09-01 12:19:07 +02:00
86d0be9708
pc-hosted: Display morse message on controlling terminal.
2019-09-01 12:11:51 +02:00
80a9fd51ca
Clarify STM32F103x8 Flashsize handling.
...
Should finally fix #471 .
2019-09-01 12:11:51 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
d1ee827b4d
pc-stlinkv2: STLINK_SWD_DP_ERROR seem unrecoverable. Throw exception.
2019-08-31 11:20:17 +02:00
0d61106f90
pc-stlinkv2: Remove redundant read of CoreID.
2019-08-31 11:20:17 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
a01109543e
pc-stlinkv2: Return failure if STLINK_DEBUG_APIV2_INIT_AP fails.
2019-08-31 11:20:17 +02:00
d994565f2e
pc-stlinkv2: Fix crash with serial given not matching connected devices.
2019-08-31 11:19:13 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
35cb4e51e4
Windows Build Fixes GNU make 4.2.1 ( #502 )
...
After update of GNU make the tests for Windows OS are no longer needed. Note that GNU make 4.2.1 is used to build BMP under Windows OS.
Make native working
Again, the newer version of GCC make does not need the OS tests.
2019-08-28 10:45:41 +02:00
5d59338de5
pc-stlinkv2: Try first to reset device if we read a strange version number.
2019-08-27 15:13:26 +02:00
44f471db53
pc-stlinkv2: READMEM_8BIT needs to read 2 bytes for 1 byte requested.
...
Fix as seen in openocd.
SYSROM_PIDR2 has only 3 bits for the JEP106 identity code field, bits [6:4].
2019-08-27 15:13:26 +02:00
82be49f052
Stlink: Add a README.md, mostly deprecating reflashing Stlinkv2/1.
2019-08-27 15:13:26 +02:00
5fbb3a44fd
PC-STLINKV2/Libftdi: Better version string.
2019-08-27 15:13:26 +02:00
fa27649f87
Remove debug_bmp command on PC hosted platforms.
2019-08-27 15:13:26 +02:00
6bf4fd3598
pc-stlinkv2: CPU register read and write must be done with the AP set.
...
FIXME: Writing CPU registers on M4 of STM32H745 seems not to work.
2019-08-27 15:13:15 +02:00
443ced62d4
Target latest libopencm3
...
Required fixes:
* use usbd_request_return_codes -- commit 54b117c5a5767df8dc114612dfd8e8cb88b72c6b
* drop deprecated timer_reset() -- commit 034dbf20ff8c54dcbee5238390b37a0d35180f44
* drop 48 & 120 MHz configs -- commit a9dde2832eb8039b9e0d21a50b9b991ddbfc4e2d
* ld scripts: drop duplication of standard sections -- commit 9a05dcb6c0aef712052d337457838f6041ffd57a
2019-08-14 00:57:15 -07:00
4289788e0b
src: Replace sprintf with snprintf
...
snprintf is needed anyway, that's one less function to have :p
And it's bad practice anyway.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:43:33 +02:00
1d4152a36f
target: Make sure variant_string is consistent in size
...
It's a global symbol and LTO will complain if the one in this file and
the one in EFM32 target are inconsistent.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:42:29 +02:00
544bcd9845
build: Allow support for .S assembly file in SRC
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:41:46 +02:00
804ec24df9
build: Apply OPT_FLAGS after platform Makefile.inc include
...
This allows the platform to specify another optimization level than
the default (like -Os if space is limited)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:29:00 +02:00
ef372d0161
build: Use a separate NO_LIBOPENCM3 flag to disable libopencm3
...
This prepares to allow other architectures than pc
that don't use libopencm3.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:24:16 +02:00
06078a8a98
stlinkv2.c: Ignore zero length memory transactions.
2019-07-28 16:28:18 +02:00
d92635b6a3
stlinkv2: Use stlink_usb_get_rw_status() where possible.
2019-07-28 16:27:52 +02:00
1b3acf3b8a
pc-stlinkv2: Print serial number of V20 devices readable.
2019-07-20 13:34:21 +02:00
e29f2b4fb9
jtag/swd: Rename defines/make variables to allow removal of weak attribute
...
jtagtap.c is libopencm3 generic. Move to common.
2019-07-18 20:54:10 +02:00
067956266c
Adiv5: Remove weak attribute to ease windows compile.
2019-07-18 18:16:19 +02:00
9e898cc4b8
adiv5: Add more coresight part numbers found on STM32MP157c-DK2 ( #492 ).
...
Only print corename if not NULL.
2019-07-18 17:39:48 +02:00
b9249ca8a6
stlinkv2: Recognize V21_MSD, e.g. on STM32MP157C-DK2.
2019-07-17 17:38:21 +02:00
dd3cb193f3
Indicate the Core in the Target list.
2019-07-17 17:38:21 +02:00
c44cb904b0
adiv5.c: Format debug output more tense.
2019-07-17 17:38:21 +02:00
205fce20e5
stlinkv2: mem_[read|write] needs to honor AP.
2019-07-17 17:38:21 +02:00
634c07c432
adiv5: Add TSGEN.
2019-07-17 17:38:21 +02:00
82424b100b
stlinkv2: Require STLINK V3 Rev > 2 as revision 1 can not read TARGETID.
2019-07-17 17:38:21 +02:00
9b764534e6
stlinkv2: Recognize Stlink V3E
2019-07-17 17:38:21 +02:00
3388e48d92
stlinkv2: Do not loop endless when Read DP fails.
2019-07-17 17:38:21 +02:00
9ed26645d3
Add pc_stlinkv2 platform, running on host, talking to original StlinkV2/3.
...
Stlink firmware needs to be recent.
2019-07-17 17:38:01 +02:00
fd3af639b0
Clean up some includes.
...
Includes #465 , noticed by Sid Price.
2019-07-17 17:26:00 +02:00
32d2b2c4bf
jtag: Move device list to it's own file to allow reuse.
2019-07-17 17:26:00 +02:00
bd530c8951
adiv5.c: Make functions weak where high level platforms may implement different.
2019-07-17 17:26:00 +02:00
5aebef4f64
Makefile: Indicate high level SWD/JTAG implemenatation.
2019-07-17 17:26:00 +02:00
3b75cb9a5a
gdb-server: Allow multiple instance.
2019-07-17 17:26:00 +02:00
9075411c93
Move gdb_if.c for stand-alone servers to common.
2019-07-17 17:26:00 +02:00
df7458e35a
Build-Infrastructure: Allow a different target name.
2019-07-17 17:26:00 +02:00
b4c680bb15
Add STM32G4
...
Based on #488 Stephen Roe, done as #491 .
Fixes ID of STM32G03.
2019-07-17 17:24:23 +02:00
5a7ffe7a40
Fixed SAM3X8C large file flashing.
...
The datasheet specifies the EEFC_BASE(0) is at `0x400E0A00` and EEFC_BASE(1) is at `0x400E0C00` which means they're spaced 0x200 bytes apart rather than 0x400.
2019-07-17 14:37:07 +02:00
02b2fdb2ae
fix overwriting of still-needed value (refs #487 )
...
this fixes a bug that was introduced in blackmagic PR #475 which lead to
firmware crashes when connecting to a BMP more than once without a
power-cycle.
2019-06-24 16:45:18 +02:00
589d297d20
stm32l0: Fix crash when only "monitor option" was requested.
...
PR #485
2019-06-12 12:54:29 +02:00
880613d641
lpc_common: restore RAM and registers after IAP call
...
Restore the RAM and registers which are clobbered by an LPC IAP call.
This does not restore any additional RAM which might be clobbered
by a *particular* IAP call. (For example, flash programming always
clobbers the last page of RAM.)
2019-05-30 14:01:27 -04:00
d3979a57b6
Add LPC command to read out unique ID from target.
...
This commit modifies lpc_iap_call() to work with IAP commands that
return additional data. If the "result" argument is non-null, 16
bytes of data (the maximum returned by any IAP command) are copied
to the specified address.
2019-05-30 14:01:12 -04:00
21434d6fbb
Remove redundant include file
2019-05-26 23:27:32 +02:00
600bc9f029
Generate DEBUG warnings and return if `malloc`/`calloc` fail.
...
This is will make debugging earier if this does happen, rather than
dereferencing the null pointer (or passing it to memcpy, or worse).
blackmagic PR #475
2019-05-26 18:56:12 +02:00
61e9607594
[adiv5] Improvements in ADIv5
...
* Reference latest version of the ARM specification
* ROM tables - more debug information, including printing SYSMEM bit
* MEM-AP - reject when Debug Base Address entry is not
present/invalid. These would only have errored in
adiv5_component_probe.
* Fix maximum number of entries in Class 0x1 ROM Table to 960. See ARM
IHI 0031E Table D3-1 ROM Table register summary.
* Resolve note in STM32H7 driver with explaination
blackmagic PR #474
2019-05-24 22:00:44 +02:00
703f88a969
gdb_main: Always release CPU when detaching.
...
Fixes Issue #413 and released as PR #477 .
2019-05-23 13:17:54 +02:00
24a7b8b2bf
[stm32h7] add revision command which reads the `DBGMCU_IDC` register
...
blackmagic PR #476
2019-05-21 23:20:13 +02:00
c336c300a3
[stm32h7,bugfix] Fix bug: target_add_flash called in attach
...
When `target_add_flash` or `target_add_ram` are called in an attach
function they may be added multiple times. This very much confuses
GDB. This issue has already been reported and fixed for `stm32l4` (See
Issue #455 ).
`stm32f4` and `stm32l4` are the only other cortexm drivers that
implement this pattern. These are both fine.
2019-05-21 22:38:16 +02:00
984813a29d
Add Stm32G03 from reference manual Rev.2
...
Not yet tested on a real part.
2019-04-24 12:29:58 +02:00
2108bb7137
Native Windows builds
...
All except hydrabus and launchpad-icdi building in PowerShell.
2019-04-07 10:26:45 -06:00
302ff20a6d
Merge pull request #434 from UweBonnes/nrf5
...
Nrf5
2019-03-21 19:43:29 +01:00
3235fa2005
Improve parsing of commands that require enable or disable arguments:
...
* Accept prefixes of the words 'enable' and 'disable'
* Prevent silent failures on parse errors
* Print status after flag changes
* Fix missing includes
2019-03-19 12:56:44 -07:00
691ada17e9
Implement read device info for NRF5x
2019-03-10 21:45:47 +01:00
3f89fed32e
nrf51: Use buffered direct write to flash.
2019-03-10 21:45:47 +01:00
4ecd13a9a3
nrf51: Fix crash with not argument given to "mon read".
2019-03-10 21:45:47 +01:00
db2f403417
sam4l: Remove noisy debug message.
2019-03-10 21:45:47 +01:00
a336ac2084
NRF5: New detection scheme.
2019-03-10 21:45:47 +01:00
6887628eaa
Correction of #445 attach-detach problem
...
Memory map is now completely freed and rebuilt in the separate attach
function.
It was previoulsy split beween probe and attach and never released,
causing problems when reattaching to the same target.
2019-03-03 15:55:40 +01:00
da62cbaa3d
Merge pull request #449 from jelson/width-fix
...
Use 32-bit variable for 32-bit read
2019-02-25 13:21:55 +01:00
86ed86c2a2
Use 32-bit variable for 32-bit read. (Also fixes DEBUG compile
...
error due to mismatch of format and argument.)
2019-02-24 17:49:30 -08:00
56fb0f7766
Handle STM32F730 and STM32H750.
...
Flash sector calculation was wrong with small flash sizes.
2019-02-21 19:19:10 +01:00
3f8c40d3f5
Fixing stm32l4 target to allow probing w/o halting
2019-02-21 18:06:38 +01:00
8de1b45c85
Kinetis KE04: Flash and debug support
...
Support for Kinetis KE04 8KiB, 64KiB and 128KiB variants in nxpke04.c
Target monitor commands for sector and mass erase.
Changes to kinetis.c MDM-AP target to support KE04.
Only KE04Z8 tested in HW.
2019-02-17 22:48:23 +01:00
02c1934c03
Added ability to lock and unlock boot rom for samd controllers
2019-02-13 16:33:07 -08:00
a6b75bb4ef
Makefile: Add -Wnocast-function-type for compilation on gcc8.
...
Older GCC versions do not warn for disabled warnings they do not know yet.
This is needed to compile with gcc8.
2019-01-16 23:17:17 +01:00
0b28232f72
[efm32] Assume Device Identification (DI) version 1 if we don't know the OUI ( #402 )
...
* [efm32] Assume Device Identification (DI) version 1 if we don't know the OUI
Silabs are using some additional OUIs we don't know about. Reported in issue #389
These should use a DI version 1 layout, so assume version 1 layout for OUIs we don't
know. However do print a notice about this on DEBUG() as suggested by @UweBonnes
The IDCODE value is sufficient to make a positive identification of an EFM32 device.
See AN0062 Section 2.2. Therefore accepting any OUI is reasonable behaviour.
Additionally the part familiy is checked, and the target rejected if not in the
`efm32_devices` table. This commit makes that rejection explicit, although it does
not change the logical behaviour here.
Note that the important registers (part number, part family, flash size) are at the
same addresses in both layouts anyhow. Currently only `efm32_cmd_serial` and
`efm32_cmd_efm_info` functions use registers that differ between DI versions.
* [efm32] tidy format warning about portability UB
* [efm32] Simplify OUI checking
* Only read the OUI once
* Accept the device even if the OU is unknown, as silabs have been using
a variety of OUIs
* Perform fewer register reads before checking the device family is valid
2019-01-16 09:58:59 +13:00
7cc02867ae
stm32f4: Fix problems with small flash sizes creating overflow or empty regions.
...
Thanks to "DerMeisteRR" for pointing out.
2019-01-09 12:23:49 +01:00
47fad2bf7f
Add Stm32L41x.
2019-01-09 12:23:49 +01:00
f0c6e2bbd2
Add STM32G07x.
2019-01-09 12:23:49 +01:00
0793dac2cf
libftdi: Allow to compile with mingw and cygwin and use recent libftdi1.
...
Tested with x86_64-w64-mingw32-gcc-8.2.0 and cygwin gcc (GCC) 7.3.0.
Use libftdi1 unconditionally.
Try to convice github travis to use libftdi1.
Remove unportable "uint ". Thanks to jacereda for pointing out in #400 .
2019-01-07 15:31:57 +01:00
3f0c9ccee1
Fix support for LPC1115 and LPC1115XL devices ( #415 )
...
* Add support for LPC11U3X devices.
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
* Fix support for LPC1115 and LPC1115XL devices
* Fix whitespace
2019-01-07 13:34:00 +13:00
02b9d5f1ac
Add delay to cortexm_reset
2019-01-07 13:32:17 +13:00
d7e2923990
Debug on stm32f1_flash_erase errors
2019-01-07 13:32:17 +13:00
6df793dbf0
Revert "Allow to specificy if SRST is asserted and when it is released."
...
This reverts commit 44fc24e0e7
2019-01-07 13:22:01 +13:00
9ce05ae67b
stm32h7/f7: Store DBGMCU_CR on attach() and restore on detach().
...
On STM32[FH]7, DBG_SLEEP must be set for debugging.
2019-01-07 13:22:01 +13:00
8d6092b73f
cortexm_forced_halt: Only release SRST after "Halt on reset" command.
...
This should make life easier if program remaps JTAG/SWD pins so that
with program running, JTAG/SWD access is impossible.
2019-01-07 13:22:01 +13:00
3ebf049424
cortexm: Only force halt before probe if idcode is unknown and ROM TABLE unreadable.
2019-01-07 13:22:01 +13:00
6633f74d95
stm32h7/f7: Write DBGMCU_CR only on attach.
...
Split probe/attach for STM32H7.
2019-01-07 13:22:01 +13:00
8575d3e7a6
stm32f7/h7: Use the DPv2 provided idcode for MCU identification.
2019-01-07 13:22:01 +13:00
525b90d4e5
cortexm: Only force halt before probe() if probe was forced.
2019-01-07 13:22:01 +13:00
da75acf015
adiv5: Only force cortexm_probe() once.
2019-01-07 13:22:01 +13:00
489f24584b
adiv5: Read TARGETID on DPv2 devices.
2019-01-07 13:22:01 +13:00
cde7726b87
cortexm: detach still needs extra cycles.
2019-01-07 13:22:01 +13:00
14bedcc441
Add support for LPC11U3X devices.
...
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
2018-10-04 08:53:05 -07:00
771d81a5f0
Fix link for windows_dfu_util
2018-10-03 15:20:09 -07:00
d8b01ff61f
swlink: Enable UART2 for SWO.
...
Stlink on STM8S-Disco needs additional wiring for SWO.
2018-10-03 15:19:33 -07:00
7cafc44bd9
swlink: Allow to enable debug on second VCOM.
2018-10-03 15:19:33 -07:00
0d246fb31a
swlink: Measure voltage on VDD pin of Stlink/Stm8s.
2018-10-03 15:19:33 -07:00
184ef991bf
swlink: Handle LED.
2018-10-03 15:19:33 -07:00
Uwe Bonnes
Richard Meadows
Roland Ruckerbauer
Artur Maciuszonek
Thiadmer Riemersma
Ken Healy
Kirill Zhumarin
dpslwk
Daniel O'Connor
Thomas Bénéteau
Dave Marples
Gareth McMullin
Sid Price
Brennan Ashton
Sylvain Munaut
Stephen Roe
Simon Rasmussen
David R. Piegdon
Alexander Zhang
David Lawrence
Sid Price
Jeremy Elson
Boris Sorochkin
newbrain
anyn99
Carl
Ingmar Jager
Josh Robson Chase
Ingmar Jager
Benjamin Vernoux
