b7e5005679
[native] Check for hardware version by pull-up and -down. Print HW Version in mon command.
...
Until now the native hardware was pulling PB5-7 down and checking if
they were asserted high. BMPMV2b is pulling the pins down instead of
high. The hardware version routine now determines the hardware version
based on the fact if a pin is asserted at all. This means that if a pin
is left floating, the version number bit will be 0, and if the pin is
asserted either high or low the bit will be set to 1. While we were
already at it the "monitor version" command in GDB will now also print
the hardware version number.
2016-02-14 22:49:29 -08:00
ac9d87635c
Merge pull request #114 from markrages/master
...
Add nRF52 support.
2016-02-11 15:49:13 +13:00
9c846d5029
Add nRF52 support.
2016-02-10 20:23:43 -07:00
d5e263122f
Increase JTAG_MAX_DEVS to 32.
...
Fixes #112
2016-02-02 10:04:57 +13:00
3527880452
Merge pull request #110 from markrages/master
...
Update nRF51 IDs, add nRF51422 and xxAB/xxAC devices.
2016-01-04 10:39:00 +13:00
7d957cbfdf
Update nRF51 IDs, add nRF51422 and xxAB/xxAC devices.
...
There were a lot of nRF51 device ids missing. I wrote a script to pull nRF51 IDs from the openocd repository, which seems to be more up-to-date. The script's output goes in nrf51.c.
2015-12-17 17:50:41 -07:00
c9d3cf71dd
gdb_main.c: fix buffer overflow on large reads
...
When gdb issues a `m xx,200` command, the probe should respond with a
packet of size 2*0x200=1024 which is the size of the packet buffer.
However, the `hexify()` procedures writes 1025 bytes in the buffer.
During my tests, it caused the probe to hang when issuing a `dump`
command. Presumably by overwritting the `cur_target` variable.
2015-12-14 11:28:28 +01:00
2d7b24c566
efm32: inhibit srst
...
EFM32s don't seem to like to be completely resetted while being debugged
(load and break were broken)
2015-12-14 11:28:28 +01:00
1e5c053f4f
flashstub: build efm32.stub with makefile
2015-12-14 11:28:28 +01:00
ff748e8fa1
flashstub: factor Makefile rules
...
Use target-specific variables
2015-12-14 11:28:28 +01:00
1f62fa4909
CRC32: improved computation time
...
Reading one byte at a time was so slow that it caused the gdb client to
timeout.
2015-12-14 11:28:28 +01:00
61c6c767b0
Merge pull request #107 from richardeoin/efm32
...
[efm32] Use SW-DP IDCODE register for identification
2015-12-13 14:59:49 +13:00
544e1080a3
[efm32] Use SW-DP IDCODE register for identification
...
Instead of the Device ID register which isn't constant for EFM32 parts
2015-12-01 21:41:08 +00:00
e6d388d057
Merge pull request #106 from richardeoin/efm32
...
Support for Silicon Labs EFM32/EZR32
2015-11-17 07:59:35 -08:00
fa7cccff23
[efm32] Formatting fixes
2015-11-14 14:56:03 +00:00
b678b83062
[efm32] oops, fixed ezr32lg probe message
2015-11-14 14:42:09 +00:00
fe3874bc82
[efm32] add extra details to probe message
2015-11-14 14:41:48 +00:00
091adda0b4
Merge branch 'umetronics-master'
2015-11-11 12:41:57 -08:00
600f0d27d9
Use sniprintf on newlib platforms.
2015-11-11 12:41:13 -08:00
56b10a1255
Merge branch 'f205' of https://github.com/schodet/blackmagic into schodet-f205
...
Conflicts:
src/stm32f4.c
2015-11-11 12:27:27 -08:00
07f7571dd1
Add basic support for EFM32/EZR32 chips
...
Tested with EZR32LG230
2015-10-23 19:58:44 +01:00
3f9ea8250a
Defined snprintf to sniprintf on launchpad-icdi
2015-10-22 19:33:45 +03:00
2365bbe010
TI TM4C/LM4F cdc-acm fixes
2015-09-30 15:48:01 +03:00
7e5a664df9
Merge pull request #98 from UweBonnes/stm32l4
...
Add STM32L4 handling. No option write handling yet.
2015-09-01 11:01:36 +12:00
6ec35bc9ff
Merge pull request #97 from UweBonnes/stm32f7
...
Stm32f7
2015-09-01 10:58:57 +12:00
3aa333ee1c
Merge pull request #95 from bvanheu/feature/nrf51_new_idcode
...
Add 0x0072 as a valid & supported idcode for NRF51
2015-09-01 10:30:55 +12:00
f7492d93be
Cortex-M: Detect and handle flash patch revision.
...
According to ARM v7-M Architecture Reference Manual
ARM DDI 0403E.b (ID120114)
2015-08-22 13:01:24 +02:00
51e2adc6d9
Add STM32F7.
2015-08-22 13:01:24 +02:00
043a2d804d
flashstub/stm32f4.c: Add barrier needed for STM32F7.
2015-08-22 13:01:24 +02:00
2336a313e4
Add STM32L4 handling. No option write handling yet.
2015-08-22 12:59:56 +02:00
97cb75145d
Add support for STM32F2xx family
...
The F405 rev A uses a wrong CPUID, this patch use the core identifier to make
the distinction.
Tested with:
- F205
- F405 rev Z
- F429
Unfortunately, I do not have any F405 rev A.
2015-08-17 14:35:11 +02:00
ef574b72b1
Add support for STM32F446x family.
...
Tested with a custom hardware.
2015-07-31 09:05:27 -07:00
e4bb1e8c55
Merge pull request #93 from richardeoin/stm_bugfix
...
[Bugfix] stm32f1_probe would always return true, breaking support for…
2015-07-31 09:02:05 -07:00
420d2c41c7
Add 0x0072 as a valid & supported idcode for NRF51
2015-07-31 00:00:00 -04:00
beacf9c85c
Refactor stm32f1_probe
2015-07-30 07:58:55 +01:00
101821ae31
[Bugfix] stm32f1_probe would always return true, breaking support for all other targets
...
The intention of `if (t->driver)` conditional was to test if any of the cases in the preceeding switch/case were met. However t->driver was previously set to point to a default value in cortexm.c:200 and therefore this would always evaluate to true. I've replaced the broken if statement with a duplicate of the switch/case run above.
It looks like this was introduced in 09544bc710#92 ) but 492d6c9cf8
2015-07-12 17:32:48 +01:00
762e54060f
Merge pull request #92 from maknoll/master
...
Fixes #90 flashing of STM32 m0 chips
2015-06-29 19:29:57 -07:00
c97d3f0f63
flashstub: Stubs need to run on different targets. Compile for M0.
2015-06-22 16:44:28 +02:00
a7f6753153
STM32f0: F07 and F09 have 2kiByte blocksize.
2015-06-22 16:44:19 +02:00
09544bc710
src/stm32f1.c: More verbose FO detection message.
2015-06-22 16:44:08 +02:00
492d6c9cf8
Merge pull request #87 from gsmcmullin/new_flash
...
Rework flash memory driver interface.
2015-05-19 10:21:55 +12:00
4af5c03d75
lmi: Use registers for stub parameters.
2015-04-21 20:05:41 +12:00
ca17de6243
lpc11xx: Correctly detect LPC8xx devices.
2015-04-11 17:23:01 -07:00
9009ed6581
cortexm: Add target option to inhibit assersion of SRST.
2015-04-11 16:08:59 -07:00
24122aa318
lpc43xx: add chipid for LPC43S37.
2015-04-11 16:08:25 -07:00
09b781f1c1
target: Remove old flash interface.
2015-04-11 16:05:41 -07:00
3d8b34f180
lpc: split out common code and rewrite to use new interface.
2015-04-11 16:05:40 -07:00
cd5d569d38
lpc: Reduce differences between lpc11xx and lpc43xx code.
2015-04-11 16:05:40 -07:00
54eb3a719f
samd: use new flash interface.
2015-04-11 16:05:40 -07:00
d340053078
nrf51: use new flash interface.
2015-04-11 16:05:40 -07:00
Piotr Esden-Tempski
Gareth McMullin
Mark Rages
Mark Rages
Laurent Bonnans
Clement Burin des Roziers
Richard Meadows
Antti Nykänen
Uwe Bonnes
Nicolas Schodet
Benjamin Vanheuverzwijn