sys64738
/
blackmagic
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
1,327 Commits 3 Branches 0 Tags 5.2 MiB
Commit Graph

1070 Commits

Author SHA1 Message Date
Uwe Bonnes 726d4b4496 adiv5.c: Add missing DEVTYPE and ARCHID to some existing PIDRs(#698,#699) 
Probably more additions are needed.
 2020-07-14 16:26:32 +02:00
Uwe Bonnes 52bfe538e3 cdcacm.c: Set bMaxPacketSize0 to 32 (#693, #697) 
Smaller bMaxPacketSize0  resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
 2020-07-14 15:57:03 +02:00
Uwe Bonnes 09ceaea70f adiv5_swdp: Fix another memory leak. 2020-07-14 15:02:13 +02:00
UweBonnes 2ae62433d2
Merge pull request #690 from themadinventor/arm_v8m 
Add ROM table support for Cortex-M33 and Cortex-M23
 2020-07-13 10:56:03 +02:00
Aled Cuda a673efc26b Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux 2020-07-12 23:14:19 +02:00
Fredrik Ahlberg 7ebb94d134 cortexm: Add comment on CPUID register 2020-07-12 22:54:39 +02:00
Fredrik Ahlberg 4391851f4d adiv5: Change component descriptions from MTB to Micro Trace Buffer for consistency 2020-07-12 22:29:04 +02:00
Fredrik Ahlberg 0aadd0abce Adiv6: Add comment on DEVTYPE and ARCHID fields with references 2020-07-12 22:27:46 +02:00
Fredrik Ahlberg fcd945a529 cortexm: Read CPUID to identify core version 2020-07-12 12:08:22 +02:00
Fredrik Ahlberg 39a20d78ff v8m: only check relevant bits in DHCSR when polling in cortexm_forced_halt 2020-07-12 12:07:12 +02:00
Fredrik Ahlberg a35e9c8e5c Adiv6: Read DEVTYPE and ARCHID to identify Cortex-M23 and Cortex-M33 debug components 2020-07-12 12:00:31 +02:00
Uwe Bonnes 661f78033a stm32f1: Add F1 XL with dual bank handling, 2020-07-08 14:31:58 +02:00
Uwe Bonnes fc6ca5bc06 Remote: Add procedure to test if high-level remote functions are available 
Removes need for updated version string.
 2020-07-08 14:15:35 +02:00
Uwe Bonnes bfda64c656 stlink: Remove unused double defined variable "running_status"(#683) 2020-07-02 19:44:31 +02:00
Uwe Bonnes 85d35b75ce libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination. 2020-07-02 14:56:10 +02:00
Uwe Bonnes a4cdd6b310 hosted: Report missing USB access rights only if no debugger found. 2020-06-07 16:29:19 +02:00
Uwe Bonnes eabd69dcdb Adiv5: Protect DBG/SYSTEM Power-Up request with timeout too. 
CMSIS-DAP without connected target looped infinite in that situation.
 2020-06-07 13:14:32 +02:00
Uwe Bonnes e35025d214 CMSIS_DAP: Warn when hidapi-libusb is not found. 2020-06-06 15:28:53 +02:00
Uwe Bonnes 5097a23196 jlink: Fix wrong sized array. 2020-06-06 15:28:53 +02:00
Uwe Bonnes 4ede113ca7 hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py 
This allows "make all_platforms" to succeed on python3 only systems.
 2020-06-05 16:23:28 +02:00
Uwe Bonnes aabd07738e cl_utils: Use start of flash in memory map as default flash start. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 425002a38f hosted: Add -l argument to list only available debuggers and exit. 2020-06-05 14:59:30 +02:00
Uwe Bonnes dc3fd2eb06 Classify debug messages 
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
 2020-06-05 14:59:30 +02:00
Uwe Bonnes 9ade8b24f7 hosted: Add Readme.md 2020-06-05 14:59:30 +02:00
Uwe Bonnes 4698a26bab common/swdptap: Slight speed increase and better setup time for write. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 64f3dff8a8 PC-Hosted: Better debug output. 2020-06-05 14:59:30 +02:00
Valmantas Paliksa b06c0ba8d5 bmp_remote: Use high level functions. 
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
 2020-06-05 14:59:30 +02:00
Uwe Bonnes 921c23eb74 serial_unix: Return instead of exit in case of error. 2020-06-05 14:59:30 +02:00
Uwe Bonnes ef558eebb8 CMSIS-DAP support. 
Thanks to edbg, pyocd and openocd for code and ideas.
 2020-06-05 14:59:30 +02:00
Uwe Bonnes 4ba6afed28 Add jlink pc-hosted platform. 2020-06-05 14:59:30 +02:00
Uwe Bonnes efce2ae892 Do not compile jtagtap and swdptap when not needed. 2020-06-05 14:59:30 +02:00
Uwe Bonnes da45281696 GetTargetVoltage: Print info about voltage only when info is relevant. 2020-06-05 14:59:30 +02:00
Uwe Bonnes ef816e3183 hosted: add libftdi implementation, remove old implementation. 2020-06-05 14:59:30 +02:00
Uwe Bonnes ab7991c3a6 hosted: Add bmp_remote, remove old pc-hosted platform. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 13c3c934d2 Hosted: Add Stlink, remove old pc-stlinkv2 platform 2020-06-05 14:59:30 +02:00
Uwe Bonnes 09602a9e74 serial_unix: Simplify timeout setting. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 8fea3f6baa pc/serial_xx: Change arguments for the open call. 2020-06-05 14:59:30 +02:00
Uwe Bonnes a09104c281 Build firmware executables as *.elf file 2020-06-05 14:59:30 +02:00
Uwe Bonnes dd022fcb44 platforms/pc: Add common usb utilities. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 52739def01 Copy relevant stlink files. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 386a4bfce7 hosted: Device detection and selection. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 3290def5f8 Add empty compilable project. 2020-06-05 14:59:30 +02:00
Uwe Bonnes c3d509e6c0 Clean up PLATFORM_HAS_DEBUG 
Use only for firmware platforms.
 2020-06-05 14:59:30 +02:00
Uwe Bonnes 9a46c6fd25 Allow BOARD_IDENT as function 2020-06-05 14:59:30 +02:00
Uwe Bonnes 563df2d354 Detour ADIv5 high-level functions. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 9969c984f3 detour jtag primitives. 2020-06-05 14:59:30 +02:00
Uwe Bonnes e34a27f72c Detour swd primitives. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 1e10b96b03 Allow multiple scan routines. 2020-06-05 14:59:30 +02:00
Uwe Bonnes b0cf7d24bd adiv5.c: Fix another leak. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 783ec377d9 adiv5: Export extract. 2020-06-05 14:59:30 +02:00
Uwe Bonnes eee16cf08a platforms/tm4c/jtagtap.c: Remove unreferenced and incomplete file. 2020-06-05 14:59:30 +02:00
Uwe Bonnes f3790b90e5 command.c: Simplify usage of serial_no serial number string. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 966ac4036d target.c: Check for valid flash structure. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 60f39f55b4 MSP432: Warn when hardware version not supported. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 7956fbc361 cl-utils: Print memory map when test is specified. 2020-06-05 14:59:30 +02:00
Uwe Bonnes b5182e09d0 cl_utils: When reading from flash to file, truncate the file. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 8db979798c cl_utils.c: Report read/write speed. 2020-06-05 14:59:30 +02:00
Uwe Bonnes c5d0902d4c cl_utils: Fix memory leak. 2020-06-05 14:59:30 +02:00
Uwe Bonnes 815e09bb1b cl-utils: Add more arguments 2020-06-05 14:59:30 +02:00
Uwe Bonnes 05adcd9bf5 remote.c: Compile only relevant functions. 
Do no compile firmware functions when compiling pc-hosted.
 2020-06-05 14:59:30 +02:00
Uwe Bonnes 16967b4328 adiv5: Remove only local dp_idcode used from ADIv5_DP_t struct. 2020-06-05 14:59:30 +02:00
Uwe Bonnes b8b34e7b1d adiv5: remove cfg for AP structure, cfg is only used local. 2020-06-05 14:59:30 +02:00
Stoyan Shopov 34a13723d8 Decrease the control USB pipe size on f103 blackmagic probes to 8 bytes 
Rationale:
In USB device mode, the f103 chip provides 512 bytes
of memory for USB traffic. In the 'master' branch
of the blackmagic probe, the control endpoint pipe size
is set to 64 bytes, effectively consuming a quarter
(1 'in' endpoint, 1 'out' endpoint == 2 endpoints,
2 /* endpoints */ x 64 /* bytes per endpoint */ == 128 bytes
out of 512 /* bytes of precious usb packet memory */).
The USB standard, for full speed devices, does allow
a control endpoint size of 8 bytes.

I am not too aware of all the details of the USB standard,
but the USB standard seems to allow fragmented transactions
on the control USB pipe (endpoint 0), which libopencm3
apparently supports:
libopencm3/lib/usb/usb_control.c:usb_control_send_chunk()

I am using this change (from 64, to 8 bytes)
on a windows 10 machine, on an stlink hardware
('PROBE_HOST=stlink'). It works on my machine.

This change can potentially provide other USB endpoints
in the blackmagic firmware with more memory
 2020-06-05 13:58:08 +02:00
Dömötör Gulyás 69e330849d fix flash map for STM32G431, as it is a special case different from the STM32G47x and STM32G48x chips 2020-06-05 13:41:18 +02:00
Thomas Bénéteau f9f928e9d6 Add support for LPC8N04 2020-06-05 12:33:51 +02:00
Mark Rages 34c0d5a1c9 When timeout is 0, `timeout_is_expired()` should return immediately. 2020-06-05 12:33:24 +02:00
Koen De Vleeschauwer 6eb1b09c1c pc-hosted semihosting 2020-05-27 12:51:29 +02:00
Koen De Vleeschauwer 541861e978 traceswo decoding 2020-05-16 15:04:35 +02:00
Koen De Vleeschauwer 54ee00b0f6 set semihosting sys_clock time origin 2020-05-13 17:50:39 +02:00
Uwe Bonnes 499309f648 stm32f1: Tell user about STM32F10(3) clone. 2020-05-13 13:07:55 +02:00
Alexey Shvetsov 1a83bc6892
Rename variant_string in efm32 samd samx5x (#659) 
* Rename variant_string

Files efm32 samd samx5x uses same function name that collides during
linking (checked with gcc10)

Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>

* Also make xxx_variant_string static

Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
 2020-05-12 17:47:04 +02:00
Alexey 'Alexxy' Shvetsov 805464db23 Fix redefinition of io function 
Now it should work fine with any gcc version. Old one produces error
like in #657

Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
 2020-05-10 10:58:03 +02:00
Uwe Bonnes 9b939f4a3a stm32f4: Fix option byte handling (#654) 
Option bytes are not accessible with level 1 protection, so
Use FLASH_OPTCR(x)
Fix crash with "mon opt write xxxx"
Handle option manipulation better when HW Watchdog fuse is set
Allow abbreviated "mon option x<yyy>" commands
 2020-05-05 12:52:32 +02:00
Sid Price 923949d5dd Fixed variable/function name clash building on Windows 2020-05-03 15:45:31 +02:00
Koen De Vleeschauwer 9f8c7be360 semihosting 2020-05-02 12:55:29 +02:00
Vegard Storheil Eriksen d63e870e82 cdcacm: Fix UART interface OUT endpoint MPS in descriptor. 
3e3e450 reduced the buffer size for the UART interface OUT endpoint to
32B, but left wMaxPacketSize at 64B. This effectively configures the
hardware to receive packets up to 32B in size while telling the host it
can send larger packets. On reception of a larger packet, the usb core
treats it as an error, drops the packet and replies with a STALL
handshake.

This commit fixes the issue by updating the descriptor to match the
buffer configuration.

Fixes #538
 2020-05-01 12:39:40 +02:00
Uwe Bonnes 08bb4d5775 pc-hosted: Make JTAG work. 2020-04-27 20:30:51 +02:00
Koen De Vleeschauwer 8851504a41 new semihosting commands 2020-04-23 09:43:46 +02:00
Uwe Bonnes ada17ada23 stm32f4/7: Always use largest flashsize for device family (#633, #635, #644) 
Do not care for the FLASHSIZE register. Leave it up to the user to abuse
flash area the ST did not announce.
 2020-04-21 17:04:07 +02:00
Uwe Bonnes 164eb43f00 NRF5: Do not reset target options. 2020-04-14 19:01:43 +02:00
Uwe Bonnes bea8436561 NRF5: Always set CORTEXM_TOPT_INHIBIT_SRST(#230) 
The problem also happens with NRF52840. Set CORTEXM_TOPT_INHIBIT_SRST
for all NRF5 device.
People should be more persistent!
 2020-04-14 18:11:23 +02:00
mean d1468530bd add basic support for LPC11U68 (and maybe LPC11U68) 2020-04-06 23:36:49 +02:00
Francesco Valla 846dadcc39 lmi: add support for TM4C1294NCPDT 2020-04-03 19:42:24 +02:00
Uwe Bonnes 58a8571d5b stlink: Print Target voltage 
This adds about 600 bytes.
 2020-04-03 16:19:20 +02:00
Francesco Valla 8a9980cd06 pc/serial_unix: bump device path buffer size to 4096 bytes 
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
 2020-04-03 11:05:11 +02:00
Uwe Bonnes b4ab9f328e pc-hosted: Put serial handling in own files for unix and implement for windows. 
- If host provided /dev/serial/by-id, device must not be given and
  multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
 2020-03-31 17:02:56 +02:00
Uwe Bonnes 18ae2bb50d cl_utils.c: Include <windows.h> for windows builds that work on files. 2020-03-31 17:02:56 +02:00
Uwe Bonnes 1a0cee4e9d pc-hosted: Clean up Makefile.inc. 2020-03-31 17:02:56 +02:00
Uwe Bonnes bd73adf9c7 bmp/pc platforms: Deduplicate code. 2020-03-31 17:02:56 +02:00
Uwe Bonnes 9ca401497c stm32/timing_stm32.c: Remove fixed constants and direct SCB access 2020-03-31 16:54:04 +02:00
Uwe Bonnes c4d7232223 Export function to read out PIDR and use for samd and samx5x. 2020-03-26 19:05:57 +01:00
Uwe Bonnes a0e42e229b Make more things static. 
No functional change intendend.
 2020-03-26 18:44:19 +01:00
Uwe Bonnes eca3a8dd8f pc-stlinkv2: Make stlink_usb_get_rw_status static and allow to suppress errors 
This helps to not overflow the console.
 2020-03-26 17:56:12 +01:00
Uwe Bonnes 91d7656d86 stlink/bootloader: Really allow to detach. 
- To reenumerate, rcc_periph_reset_pulse(RST_USB) seems enough.
- Document bootloader entry and exit behaviour of ST-LINK V2
- Document bootloader entry on ST-LINK V2-1
 2020-03-26 17:15:32 +01:00
Uwe Bonnes 890b494290 pc-stlinkv2: Update README.md 2020-03-26 12:21:22 +01:00
Uwe Bonnes effd43ce38 Harden cortexm_reset() and remove double reset(#601) 
Thanks to Dave Marples <dave@marples.net> for input.
- Issue only one reset. Start with SRST. Only if not seen, use SYSRESETREQ
- Wait for release of DHCSR_S_RESET_ST before issuing more commands
- Add timeout to catch reset line stuck low
- Remove AP errors
 2020-03-25 11:22:14 +01:00
Uwe Bonnes 2e185ba578 BMP/PC: Allow to compile with mingw64 (#615) 
__USE_MINGW_ANSI_STDIO 1 must be set befor any windows specific included.
 2020-03-24 17:59:13 +01:00
Uwe Bonnes 2b76ec0ea3 dfucore: Reject erase outside the allowed range 
An illegal erase request may get emitted as the DFU program may erase
first. Checking before flashing is not enough.
 2020-03-22 16:38:54 +01:00
Uwe Bonnes a7efe7cc14 cl-utils: Display targets found. 
+ other small changes in DEBUG output.
 2020-03-10 17:34:30 +01:00
Uwe Bonnes 65cb886bb6 Export connect_under_reset. 2020-03-10 11:44:53 +01:00