1890426669
native: Reformatted the TMS and SWDIO macros in the platform header
2022-08-15 22:16:15 -07:00
4ca3982599
native: Cleaned up the SWDIO turnaround macros
2022-08-15 22:16:15 -07:00
e7f45aea7e
hosted/remote_jtagtap: Refactored out another unnecessary snprintf() call from TAP init remote call code
2022-08-15 22:16:15 -07:00
cf07861405
hosted: Implemented support for the new target clock tristating on BMP
2022-08-15 22:16:15 -07:00
450581cc0a
hosted/bmp_remote: Implemented support for the new remote protocol target clock tristating
2022-08-15 22:16:15 -07:00
84527d501b
remote: Implemented support for target clock tristating
2022-08-15 22:16:15 -07:00
01110a206b
remote: Run clang-format across most of the rest of the remote interface header
2022-08-15 22:16:15 -07:00
3efcc9b0f5
remote: Fixed the naming style of the JTAG and SWD packet processors to comply with the project style
2022-08-15 22:16:15 -07:00
e1007a98bb
remote: Run clang-format on the JTAG and SWD packet processors
2022-08-15 22:16:15 -07:00
dd0e99b0e6
remote: Run clang-format on the JTAG and SWD protocol header definitions
2022-08-15 22:16:15 -07:00
682ae75431
remote: Rewrote remotehston using a for loop and a const-correct type signature
2022-08-15 22:16:15 -07:00
52160db72b
native: Done a spring pass in platform_init() with clang-format and removed a duplicate gpio_set_mode() call
2022-08-15 22:16:15 -07:00
7a0f6597ff
platform: Implemented sub support in the non-native platforms for target clock tristating
2022-08-15 22:16:15 -07:00
adcfe22f86
native: Implemented platform support for tristating the TCLK/SWCLK pin
2022-08-15 22:16:15 -07:00
b70b807a4e
F072/F3: Rework Readme.md
...
Give explicit instructions for initial firmware loading and updating.
2022-08-15 19:11:44 -07:00
eedf21e821
usb_serial: run clang-format on the code
2022-08-12 22:25:52 -07:00
0477d5ee8e
traceswo: Replaced two magic numbers with the proper macros
2022-08-12 22:25:52 -07:00
0f37edc36a
misc: Renamed cdcacm.{c,h} to usb_serial.{c,h}
2022-08-12 22:25:52 -07:00
8f41217d29
gdb_if: Run clang-format and done some cleanup
2022-08-12 22:25:52 -07:00
aa6d0fa7e4
usb: Moved usb_get_config() into the main usb header
2022-08-12 22:25:52 -07:00
832c056e6d
usb: Moved usb_get_state() into the main usb implementation
2022-08-12 22:25:52 -07:00
bf6c146786
cdcacm: Renamed cdcacm_get_config() -> usb_get_config()
2022-08-12 22:25:52 -07:00
983a541cab
cdcacm: More naming fixes for various functions
2022-08-12 22:25:52 -07:00
49d21b0f44
cdcacm: Made gdb_uart_dtr a bool, saving space and memory
2022-08-12 22:25:52 -07:00
109f661e31
gdb_if: Cleanup in the include order
2022-08-12 22:25:52 -07:00
82c83bb77e
usb_gdb_uart: Renamed cdcacm_get_dtr() -> gdb_uart_get_dtr()
2022-08-12 22:25:52 -07:00
2e5143bb5f
common: Moved blackmagic_usb_init() into the main USB header
2022-08-12 22:25:52 -07:00
da320a42f3
cdcacm: Refactored cdcacm_set_modem_state()
2022-08-12 22:25:52 -07:00
adf8ae1ef1
common: Moved the DFU stub out into its own file with seperate handler registration so we don't cross the handler streams
2022-08-12 22:25:52 -07:00
400ee0c76c
serialno: Improved the naming of the serial number reading function
2022-08-12 22:25:52 -07:00
886c790b25
serialno: Refactored the serial number code, cleaning up its API and localising implementation details
2022-08-12 22:25:52 -07:00
259077a87d
common: Moved the USB initialisation code into usb.c
2022-08-12 22:25:52 -07:00
ada59291c2
common: Broke the USB descriptors out to their own header
2022-08-12 22:25:52 -07:00
d6f8a343a2
platform: Fixed the order of operations with the physical UART init vs the USB stack init
2022-08-12 22:25:52 -07:00
82bca86806
platform: Renamed cdcacm_init -> blackmagic_usb_init
2022-08-12 22:25:52 -07:00
105f6a3dce
common: Begun splitting the USB code into more sensibly named implementation files
2022-08-12 22:25:52 -07:00
3606784663
hosted/cmsis_dap: Add a dummy read to the end of dap_mem_write_sized() so we always wait on the write to ensure it's complete before any DP access can occur
2022-08-08 14:45:38 -07:00
4c544bad28
adiv5: Add a dummy read to the end of firmware_mem_write_sized() so we always wait on the write to ensure it's complete before any DP access can occur
2022-08-08 14:45:38 -07:00
7107d14bbc
sfdp: Moved the read debugging into the implementation
2022-08-08 14:43:29 -07:00
1556db88de
rp: Made use of the extra information we pull back from the SFDP data in rp_flash_erase
2022-08-08 14:43:29 -07:00
09b044e351
rp: Cleanup in the Flash write/erase routines
2022-08-08 14:43:29 -07:00
e69a79cecf
rp: Types cleanup for the Flash erase/write routines
2022-08-08 14:43:29 -07:00
4630353be4
rp: Created a Flash container type for the SPI-specific configuration bits
2022-08-08 14:43:29 -07:00
d883fd0cdc
rp: Refactored the SPI Flash parameter and size readout into rp_add_flash()
2022-08-08 14:43:29 -07:00
8e99e8ec4d
rp: Added some debugging to the SFDP read routine to aid with SFDP failures
2022-08-08 14:43:29 -07:00
298299d85b
rp: Cleaned up some variable naming in the ROM function table reader
2022-08-08 14:43:29 -07:00
9681475ab5
rp: Made use of the SFDP routines to extract the necessary Flash parameters
2022-08-08 14:43:29 -07:00
253d0cc1d9
rp: Entirely rewrote the SPI Flash read routine so we can implement SFDP support
2022-08-08 14:43:29 -07:00
6559c46ce9
sfdp: Implemented a structure for the JEDEC ID data
2022-08-08 14:43:29 -07:00
969c7c6c14
rp: Naming cleanup for the memory region base addresses and sizes
2022-08-08 14:43:29 -07:00
ff30b66b3a
rp: Cleaned up the RP register definitions for the SPI Flash and the chip select line control routine
2022-08-08 14:43:29 -07:00
2058725dd8
rp: Cleaned up and rewrote the ROM function table readout code to be more understandable and transparent
...
This saves 20 bytes of Flash
2022-08-08 14:43:29 -07:00
a372cfd787
rp: Fixed the private structure naming and made a typedef for it
2022-08-08 14:43:29 -07:00
11b43a7c66
rp: Refactored the ROM table tags using a helper macro
2022-08-08 14:43:29 -07:00
f2b0d3030c
rp: Fixed the UB _-prefixed naming of the ROM routines
2022-08-08 14:43:29 -07:00
8d772d048b
rp: Cleaned up ROM table function table readout
2022-08-08 14:43:29 -07:00
8382b0aa7d
rp: Magic numbers cleanup using top of file definitions
2022-08-08 14:43:29 -07:00
96259d11c8
sfdp: Implemented the logic needed to read the headers and basic parameter table
2022-08-08 14:43:29 -07:00
d9c7c8bc13
sfdp: Implemented types and helpers for the basic parameter table
2022-08-08 14:43:29 -07:00
c6133a8cae
sfdp: Begun implementing the machinary needed to read and parse out SFDP headers from SPI Flash
2022-08-08 14:43:29 -07:00
64c0b8a298
target_internal: typedef'd the target_flash structure to make use nicer
2022-08-08 14:43:29 -07:00
802c5fb87c
hosted/jlink: fix bad line reset cmd building
...
extra memset set bits that were not set before code cleanup
2022-08-08 12:30:34 -04:00
1b8dd3a5d9
target: Made target_flash_for_addr() available as a target internal
2022-08-07 20:16:04 -07:00
253a12f014
native: Enable uart on HW >=V3 when debugging.
...
We were disabling the UART on all Hardware V1 and newer, as V1 and V2
had the SWD pins connected to the UART pins. Since V3 this is not the
case any more so we can keep the UART enabled when an SWD debugger is
connected to the BMP.
2022-08-07 22:59:23 -04:00
7cacdab98e
hosted: Cleaned up the CFLAGS and LDFLAGS building to use pkg-config to find libusb1 and corrected the pkg-config presence check
2022-08-07 13:42:32 -07:00
3dadd64f9b
samd: Made all the defined constants unsigned
2022-08-07 13:38:42 -07:00
da2c4f24b0
samd: Done a little reformatting of the defined constants
2022-08-07 13:38:42 -07:00
5ade9143a6
samd: Removed piles of needless command handler casts
2022-08-07 13:38:42 -07:00
0be6c1bc72
samd: Corrected the DID family mask
2022-08-07 13:38:42 -07:00
d9e14645da
samd: Fixed a couple of clang-tidy warnings
2022-08-07 13:38:42 -07:00
aff2f4e428
hosted/cli: Made sure the command line options structure is initialised with opt_mode = BMP_MODE_DEBUG before args parsing
2022-08-07 13:37:09 -07:00
c89fd19632
adiv5_jtagdp: remove double-parens on if statement
...
Some parens were doubled-up, which can cause warnings on certain
platforms. Remove the double-parens in order to fix this warning.
Signed-off-by: Sean Cross <sean@xobs.io>
2022-08-07 11:10:05 -04:00
aeab1bae03
adiv5: use PRIxNN specifiers for debug printfs
...
This fixes a few printf-style warnings that slipped through due to the
fact that they're only enabled on debug builds. This enables building
this file on an Xtensa platform where -Werror and -Wformat is enabled by
default.
Signed-off-by: Sean Cross <sean@xobs.io>
2022-08-07 11:10:05 -04:00
d41bb2a7f0
Fix Windows build due to lack of alloca.h
2022-08-06 18:35:01 -04:00
0075abacbf
jlink_adiv5_swdp: remove duplicated logic on swdp low access
2022-08-06 18:02:30 -04:00
4f01ffe56c
misc: change return type of scan routines to size_t
2022-08-06 18:02:30 -04:00
7db6c71095
platform: set power flag to const
2022-08-06 18:02:30 -04:00
322af2506b
hosted/platform: make platform identifier nicer to read
2022-08-06 18:02:30 -04:00
3a673225b7
hosted/stlink: make swd scan function more consisted with other probes
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-08-06 18:02:30 -04:00
ce6477886f
target/adi: unify DPIDR TARGETID handling in adiv5_dp_init
...
this makes the assumption that DPs will be v1 or higher, for SWD-DP scans this is
guaranteed, but on JTAG-SCANS it may not be true, DPv0 does not have DPIDR
implemented and reads are UNPREDICTABLE
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-08-06 18:02:30 -04:00
c04b98435a
adiv5_jtagdp: code format
2022-08-06 18:02:30 -04:00
0fbb6921b9
jlink_adiv5_swdp: code cleanup
2022-08-06 18:02:30 -04:00
564114df13
platform: code format and style
2022-08-06 18:02:30 -04:00
a1f0d28913
platform: check calloc result
2022-08-06 18:02:30 -04:00
81890b1fe9
target/adi: clarify TARGETSEL mask and offset
2022-08-06 18:02:30 -04:00
20d4109c56
target/stm32h7: fix ids
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-08-06 13:46:53 -04:00
87cabb78e5
target/cortexm: print t->part_id not ap->partno in unknown device warning
...
this is the id used to probe, which may or may not be the same
2022-08-05 13:47:09 +01:00
180ceabae3
fix: Correct grammatical error
2022-08-03 19:30:27 -07:00
ae23cb879e
hosted/jlink: add warning when ignoring unkown pids
2022-08-01 23:04:28 +01:00
eb8b930841
hosted/jlink: add pid 0x1015 as a valid J-Link debugger
2022-08-01 23:04:28 +01:00
46fd32da5c
hosted/jlink: fix vid-pid transposition error
2022-08-01 23:04:28 +01:00
0077d31be3
rp: Make the function naming scheme uniform
2022-07-31 16:23:31 -07:00
6288d5884d
rp: Fixed another clang-tidy warning
2022-07-31 16:23:31 -07:00
7266e3cf54
rp: More code re-ordering to make the order of definitions make more sense
2022-07-31 16:23:31 -07:00
982d1ac847
rp: atoi() -> strtoul() to fix the clang-tidy warning and improve robustness and correctness
2022-07-31 16:23:31 -07:00
efb2e99408
rp: re-grouped the target-specific commands to the bottom of the implementation
2022-07-31 16:23:31 -07:00
ae982cae6b
rp: Begun re-ordering the code to make it more like other targets
2022-07-31 16:23:31 -07:00
9015013195
rp: static correctness for several of the RP2040 routines
2022-07-31 16:23:31 -07:00
f429898adb
rp: Removed rp_detach as the function serves no purpose
2022-07-31 16:23:31 -07:00
df513ebda8
Added support for AT32F403A/407/415.
2022-07-31 12:21:26 +01:00
dragonmux
Uwe Bonnes
Rafael Silva
Piotr ESden-Tempski
Sean Cross
SId Price
gatin00b
grumat