8b7c6bbaba
Added monitor commands to set GPNVM bits on SAM3X.
2012-06-24 21:55:22 +12:00
03fdd23e9c
Added mechanism for target driver to add new monitor commands.
2012-06-24 21:41:32 +12:00
a16123997b
Added target.c for common target routines.
2012-06-24 19:08:49 +12:00
8872315e82
Updated lmi, nxp and stm32f4 drivers to use adiv5_target_ap().
2012-06-24 14:44:02 +12:00
cb19164f2f
Added flash erase function for Atmel SAM3X.
2012-06-23 21:13:08 +12:00
c09cbe8719
First cut at an Atmel SAM3X driver.
2012-06-22 23:13:25 +12:00
33905d7203
Check target error after target specific probes.
2012-06-21 20:54:56 +12:00
6089a66dce
Renamed target_flash_write_words to target_flash_write.
...
Buffer from GDB may not be aligned or integer number of words.
Corrected alignment in in STM32F1 driver.
2012-06-18 20:53:06 +12:00
bc7e7d2112
Removed target header files containing a single prototype.
...
Target probe prototypes are all in target.h now.
2012-06-18 20:27:06 +12:00
bc5a6f022b
Renamed Cortex-M driver appropriately since it support M0, M3 and M4F.
2012-06-18 19:56:19 +12:00
0599bdc5c4
Cleaned up STM32F1 driver and renamed appropriately.
2012-06-18 19:46:41 +12:00
3a0cc44bbe
Cleaned up access to ADIv5 AP in Cortex-M driver.
2012-06-18 19:28:06 +12:00
8920864cb3
Cleaned up access to ADIv5 AP for target.
2012-06-18 19:19:13 +12:00
77aab2d336
Updated HACKING file to new libftdi platform name.
2012-06-10 19:10:15 +12:00
54f4467c0f
Added stlink platform for Discovery boards and ST's ST-Link hardware.
2012-06-10 19:06:37 +12:00
89bcdcc60a
Moved stm32 generic platform files out of native platform dir.
2012-06-10 17:34:26 +12:00
acff8d4497
Made jtagtap.c and swdptap.c STM32 generic.
2012-06-10 17:08:14 +12:00
8d190cdbb9
Renamed platforms to 'native' and 'libftdi' and moved into 'platforms' dir.
2012-06-10 16:40:07 +12:00
c825270561
Indicate UART activity on yellow LED.
2012-06-10 15:45:38 +12:00
c1a34f3f59
Removed incorrect directory references in Makefile.
2012-06-10 15:45:38 +12:00
eabd4654f9
Use the same LED for run/idle. Reserve spare LED for UART.
...
Enable AFIO to fix EXTI for USB VBUS detect.
2012-06-10 15:45:38 +12:00
c35d0b29b3
Removed a stray printf.
2012-06-03 21:28:39 +12:00
bad49dbb90
Added missing stm32/usbuart.h.
2012-05-27 13:02:45 +12:00
6030ff6f26
Separated USB UART interface into separate file.
2012-05-26 22:53:29 +12:00
3dcdc5b26f
Improve USB UART handling. Fix interrupt priorities.
2012-05-26 20:57:47 +12:00
b98d01dff8
Update Windows drivers to use new USB IDs.
2012-05-26 15:33:16 +12:00
e533812c32
Use our new USB VID/PID. Thanks OpenMoko, Inc.
...
DFU now uses the same short serial number as application.
2012-05-26 15:20:23 +12:00
01bf5e6b44
Fixed and cleaned up build for libftdi platform.
2012-05-26 15:05:37 +12:00
09330d7fa9
HACKING: Corrected libftdi instructions.
2012-05-24 18:23:58 +12:00
8d2c0ff9e5
Report target voltage on scan.
...
ADC is used on mini hardware, standard hardware reports ok/absent.
2012-05-23 21:44:39 +12:00
40bb74cc81
Detect hardware version. Disable UART on mini h/w under debug.
2012-05-23 20:25:45 +12:00
700f9e6ad1
DFU: Erase option bytes before writing.
2012-05-23 19:31:51 +12:00
241bf765ec
DFU: Protect bootloader sectors if needed.
...
Check address bounds on erase/set address.
2012-05-22 21:47:18 +12:00
5eb3a375e0
Added Windows libusb driver for Trace port interface.
...
Converted windows driver inf file to utf-8 encoding.
2012-05-19 14:43:57 +12:00
de49a9a21f
Remove dependencies on make clean.
2012-05-19 11:54:22 +12:00
32c1af05de
Don't clobber watchpoints used for trace.
2012-05-19 11:53:41 +12:00
38bea69f8a
Fixed some issues with trace port capture.
...
Process last capture even on timeout. Prevents last bit getting lost.
On timeout, don't allow next edge to resync decoder.
Timeout on 6 bit periods instead of 5.
Set systick interrupt to low priority.
2012-04-29 20:35:19 +12:00
86626085d8
Fixed TRACESWO capture.
...
'mon traceswo' reports serial number and interface/endpoint no for libusb.
Interrupt priorities set so TIM3 for trace is highest priority.
Increased trace endpoint packet size to 64.
Buffer many trace packets into a single usb packet. Stall on overflow.
Fixed stop bit detection in TIM3 interrupt handler.
2012-04-22 12:27:18 +12:00
b39572e17c
Correct jtag port init to not interfere with usb vbus detect.
2012-04-22 12:21:24 +12:00
c1e9425725
Cleaned up traceswo capture routine.
2012-04-20 17:56:41 +12:00
21ecbd23ea
Added capture of SWO, passed to host over a vendor specific USB interface.
2012-04-18 19:15:44 +12:00
9cff48dc6b
Added .gitignore
2012-04-18 19:13:38 +12:00
405570636b
Added a Makefile for generation of some hardware outputs.
2012-04-12 18:47:30 +12:00
b513799c10
hardware: Removed solder paste openings on fiducials.
2012-04-02 16:57:40 +12:00
75a2f97a0b
Added new mini hardware design.
2012-03-25 20:19:31 +13:00
c0493ee0e8
Monitor USB VBUS to control D+ pull-up resistor.
2012-03-24 19:25:16 +13:00
ebf15cf5e2
Windows driver now supports 64-bit.
2012-03-24 19:02:03 +13:00
537cbcdbd8
Added Windows driver setup info for DFU interfaces.
...
These use libusb and work with the uploader in the upgrade dir.
2012-03-18 15:16:51 +13:00
87c14c294b
Fixed some issues in Windows DFU uploader.
2012-03-18 15:15:00 +13:00
a43cbf65c9
Report FP registers as feature "org.gnu.gdb.arm.vfp".
...
This allows GDB to synthesise single precision registers S0-S32.
2012-02-12 14:59:42 +13:00
Gareth McMullin