Without a measured quantity in packet.meaning->mq the C++ binding function
sigrok::Analog::mq() throws an exception and there is no way to check if
there is any measured quantity set in the analog package.
Add support for the Pepino-style of accessing >256K of memory. Because
this the only known extension of accessing >256K currently, we apply it
as soon as the sample size is bigger than 256K. Let's hope other
devices (if any) will follow this style. If not, we need to add support
depending on the device name later.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Magnus (creator of the Pipistrello) confirmed that he mixed up the
register names. The code was doing it correctly nonetheless but was
confusing to read because of this. Fix it to make it easier to
comprehend.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Let max_channels really carry the number of maximum channels the
hardware supports. We will handle the limitation of only half the
channels available in 200MHz mode later. Note that there won't be a
regression because we only set the variable but never check it. The
desired result of this patch is the removal of the NUM_CHANNELS macro.
The number of channels needs to be dealt with at runtime.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We needs this twice so put it into a seperate function, so updates to it
will automatically handled for both callers.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
commit f51acd69 ("ols: combine demux samples") wrongly replaced the bit
pattern of 0x20 with the number of channels which just happens to be 32
as well. So, the code works but is confusing to read. Reword the
for-loop to make it more comprehensible.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The OLS protocol sends 16bit values to specify the sample count and
delay count. However, this 16bit value is the number of 32bit words to
be sampled, so the actual sample count is 4 times larger and does not
fit into a uint16_t. Extend it to support the full range of 256K
(LogicShrimp will need this) and to prepare support for devices with
even more memory (Pepino).
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The previous implementation assumed that a receive data chunk ends
exactly with a sensor packet's end. Yet the buffer had 32 bytes while
the packets have 19 bytes.
Separate the data reception from the packet processing. Collect whatever
chunks the USB connection provides, and scan the resulting buffer for
packets. Cope with either incomplete or corrupt or misaligned packets as
well as with multiple packets in receive chunks. The latter might happen
upon initial synchronization, when a device already sends data or the
serial port buffered previously communicated data.
In the regular case, the computer will process so fast that each single
character will be handled individually. We don't mind. The frequency is
some 60 times per second, and the data volume is 19 bytes. The software
works for the regular case, and synchronizes fast at startup or after
comm errors.
Always print the data bytes of received buffers in the packet parser,
then check some more fixed fields to not process invalid packets, then
process the packet content as the previous implementation did.
Call the packet parser for incomplete packets and discarded input
buffers as well (initial synchronization, re-sync after comm errors).
This results in the availability of more diagnostics during development.
Pass the packet's location and size from outside. This prepares the
logic to cope with situations where the receive buffer contains multiple
(potentially incomplete) packets.
Slightly unobfuscate the UT32x packet parser. The protocol is mostly
ASCII based, checks for hex numbers may be unexpected. Use symbolic
identifiers for the packet length and some special characters.
The previous implementation of the UT32x driver expected to see a conn=
spec, without it no device is found. Default to the USB identification
of the CH9325 chip, to make the driver work out of the box. Users still
can provide conn= specs and override the default for other cables.
Fill in the scan, open/close, get/set/list, acquisition start/stop logic
such that data acquisition with a PICkit2 works.
Trigger support needs more attention. User specified triggers either
seem to not take effect, or the trigger position is not in the expected
location. It's yet to get determined what's the issue.
This implementation is based on protocol information gathered from the
pk2-la project.
Remove a free() call in an error path for a list which immediately
before the call was determined to be NULL. Use index 0 and 1 for
channels P1 and P2 respectively (the previous implementation used 0
for both channels).
The current implementation of the SCPI DMM driver is conservative about
checking the device's being operational, but the *OPC? queries are found
in unfortunate locations. Run the OPC query right before running the
next "actual" command, not afterwards. And certainly not between sending
requests and potentially gathering responses in subsequent calls.
This commit does not change current behaviour, but improves maintenance
before pending commits.
The "get MQ" helper routine communicates SCPI responses and translates
them to internal "MQ and flag" values. Optionally return the MQ table
entry reference to callers, so they don't have to repeat the table
lookup when the function's default precision is required, or should
future "start acquisition" requests need to refer to the meter's current
function.
Supported SCPI DMM devices will differ in the set of options and whether
parameters can get queried or configured. Use a "generic" set of devopts
during scan and for simpler models, prepare support for other sets of
devopts for more complex models.
Implement the scpi-dmm driver in such a generic way that it could work
with several protocol variants and with differing models which happen to
use any of these protocol variants. Prepare a list of supported models
with their respective SCPI command set, set of DMM functions and their
precision.
Add support for Agilent 34405A. The ten functions of this device got
tested and are operational, in continuous mode as well as with sample
count or capture time limits. The driver can query the current meter's
function, can change the function, and can run acquisitions in either
the current mode or with a user specified function selection. There is
some potential for improvement: AUTO/MIN/MAX/HOLD indicators are not
supported by this implementation.
The SCPI protocol may communicate strings in quoted form, enclosed by a
matching pair of single or double quote characters, and occurances of
this very quote character within the string get doubled (escaped). Add a
common routine to undo the quotes.
Free the SCPI hardware info after successful model detection, too. Only
allocate the device instance when a supported model was found. Link the
device context earlier right after allocation, for easier verification.
The Fluke 45 probe routine tries to detect whether the serial port is
"in echo mode" (which already is questionable before the IDN query).
In the absence of a response, the library segfaults. Fix it.
Align the scaling items such that all numbers are aligned. Drop unneeded
"prefixes" for the 2nd display's tables, the main and sub displays already
have their individual tables which reside in their respective groups.
Add an "eevblog-121gw" subdriver entry for the EEVblog 121GW multimeter.
Use device dependent channel names instead of the default "P1" etc names.
It's assumed that the device's binary packet data is available at a COM
port. This means that an external BT to UART gateway is required until
BLE communication will be one of libsigrok's native connection types.
Introduce the dmm/eev121gw.c source file with parse routines for the
EEVblog 121GW meter's 19-bytes binary packets. Get the values and MQ
properties of the device's several displays (main, sub, bar) in several
individual parse calls.
This commit introduces initial support for the device. Some of the modes
and features are untested, as are some of the device's ranges.
Due to some SCPI command changes that Siglent made, the connection
failed due to the wrong commands being send to the device.
This might fix parts of bug #1242, though initial tests show that
further changes might be needed.
[Note: This commit consists of multiple squashed commits from
marchelh <marchelh@gmail.com> and various fixups and rebasing
operations by Uwe Hermann <uwe@hermann-uwe.de>]
Regular operation of serial DMM drivers optionally can dump packet bytes
after the intialization phase has synchronized to the stream. Failure to
synchronize to the stream left developers without a dump, which complicates
research what went wrong.
Do dump packet content while the serial_stream_detect() routine tries to
synchronize to the stream. Use the spew level since the dump occurs upon
every attempt, which translates to: every received byte until a valid
packet was seen (or the synchronization phase expired).
The previous implementation always dumped 23 data bytes for received
packets. This could result in truncated diagnostics information, and/or
access to invalid buffer content.
Rephrase the packet dump routine such that the specific meter's exact
packet length gets dumped, and use the common hex dump support code.
Introduce common support for hex dumps in the string util collection.
There are explicit allocation and release routines for the textual
representation of the data bytes, so that callers are free to chose
whether and how to decorate the dump and where to send the message.
Keep (part of) previous results around when the VCD input module gets
reset, and check the header of the next import against previous runs to
avoid issues in applications. This addresses the VCD specific part of
bug #1241, and resolves the remaining part of bug #1306.
Applications are not prepared to handle changes in the channel list
between multiple acquisitions from the same source (device drivers
or input modules). Introduce common helpers to compare channels and
channel lists.
There was the sr_channel_new() allocation routine, but releasing that
allocation was open-coded in call sites. Add the sr_channel_free()
routine for code re-use and consistency.
This addresses part of bug #1306. The reset() method of the VCD input
module was incomplete, and did not process new data upon second read.
Improve robustness and add missing reset instructions. Void invalid
pointers and avoid NULL dereferences in cleanup paths.
Example:
In file included from src/hardware/kecheng-kc-330b/protocol.h:26,
from src/hardware/kecheng-kc-330b/api.c:22:
src/hardware/kecheng-kc-330b/api.c: In function ‘config_list’:
src/libsigrok-internal.h:51:34: warning: division ‘sizeof (void *) / sizeof (void)’ does not compute the number of array elements [-Wsizeof-pointer-div]
#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
^
src/libsigrok-internal.h:55:32: note: in expansion of macro ‘ARRAY_SIZE’
#define ARRAY_AND_SIZE(a) (a), ARRAY_SIZE(a)
^~~~~~~~~~
src/libsigrok-internal.h:964:43: note: in expansion of macro ‘ARRAY_AND_SIZE’
std_opts_config_list(key, data, sdi, cg, ARRAY_AND_SIZE(scanopts), \
^~~~~~~~~~~~~~
src/hardware/kecheng-kc-330b/api.c:296:10: note: in expansion of macro ‘STD_CONFIG_LIST’
return STD_CONFIG_LIST(key, data, sdi, cg, NULL, drvopts, devopts);
^~~~~~~~~~~~~~~
Default to the existing "P1" etc naming scheme for analog channels of
serial-dmm subdrivers. Add support for subdriver specific channel names
(which can reference the channel number if they desire). This is useful
for devices with multiple displays, or special purpose devices where
other names than P1 can better reflect the channel's nature.
Commit 556a926d43 introduced support for multiple displays in
subdrivers of serial-dmm, but also changed user visible channel numbers
to start from 0. Restore the previous behaviour, start counting from 1
which users may perceive as more natural (serial-dmm used to start at P1
in the past, scopes start with CH1 as well).
There are code paths where dev_close() tries to access a USB handle
which does not exist. This was observed with this command:
$ sigrok-cli -d brymen-bm86x --scan
On Windows, this device can either enumerate as 04b4:602a or 04b5:602a,
depending on which vendor driver is currently being used, so we have to
support both in the hantek-6xxx driver as well.
This fixes bug #1295.
In the case where the input unit was not in the array, the for loop would
complete, but the following test would then read past the end of the array
since 'i' would already have been incremented to the array size.
Spotted because unitless data was getting SI prefixes with no unit, though
this would not have been deterministically reproducible.
This fixes parts of bug #950.
The comment says "A requested value is certainly on the way", but the code no
longer works this way. The receive handler requests a value and blocks until
it is received. There is no value pending between receive handler calls, so
this code now only leads to a timeout.
Applications might pass NULL for the buffer, and input modules might
accept it (or just cope). Eliminate a potential NULL dereference in
the emission of diagnostics messages.
On Windows, this device can either enumerate as 04b4:6022 or 04b5:6022,
depending on which vendor driver is currently being used, so we have to
support both in the hantek-6xxx driver as well.
This fixes bug #918.
This is happening because the send() and recv() functions
have different prototypes on POSIX and Windows. Using the casts
is required on Windows and doesn't hurt on POSIX systems.
[...]/protocol.c: In function 'tcp_send':
[...]/protocol.c:161:26: warning: pointer targets in passing argument 2 of 'send' differ in signedness [-Wpointer-sign]
out = send(tcp->socket, buf, len, 0);
^
In file included from [...]/protocol.c:24:0:
[...]/include/winsock2.h:997:34: note: expected 'const char *' but argument is of type 'const uint8_t * {aka const unsigned char *}'
WINSOCK_API_LINKAGE int WSAAPI send(SOCKET s,const char *buf,int len,int flags);
^
[...]/protocol.c: In function 'ipdbg_la_tcp_receive':
[...]/protocol.c:201:32: warning: pointer targets in passing argument 2 of 'recv' differ in signedness [-Wpointer-sign]
int len = recv(tcp->socket, buf, 1, 0);
^
In file included from [...]/protocol.c:24:0:
[...]/include/winsock2.h:992:34: note: expected 'char *' but argument is of type 'uint8_t * {aka unsigned char *}'
WINSOCK_API_LINKAGE int WSAAPI recv(SOCKET s,char *buf,int len,int flags);
^
[...]/protocol.c: In function 'data_available':
[...]/protocol.c:73:38: error: 'bytes_available' undeclared (first use in this function)
ioctlsocket(tcp->socket, FIONREAD, &bytes_available);
^
[...]/protocol.c:73:38: note: each undeclared identifier is reported only once for each function it appears in
[...]/protocol.c:84:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
The fx2lafw(4) driver supports mere logic analyzers as well as mixed
signal devices, but does not support channel group specific device
options. Avoid an error message when channel group device options get
queried, the condition is perfectly legal and non-fatal.
How to reproduce:
$ pulseview -d fx2lafw
$ sigrok-cli -d fx2lafw -g Logic --show
This fixes bug #1267.
The "firmware load failed" message would be even more helpful if users
could learn which firmware file failed to load. Add those filenames to
various FX2-based drivers.
This addresses bug #1262.
As per Daniel Anselmi <danselmi@gmx.ch> in an email conversation, the
code was actually written by Eva Kissling <eva.kissling@bluewin.ch>
(as indicated in the commit logs as well). Fix the headers accordingly.
Use "ipdbg-la" everywhere to refer to the driver, including
in function name prefixes etc. There's no need to encode
website details (.org) into the driver/function name(s).
With gcc 8 this yielded:
src/input/wav.c: In function ‘receive’:
src/input/wav.c:345:51: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 6 [-Wformat-truncation=]
snprintf(channelname, sizeof(channelname), "CH%d", i + 1);
^~
src/input/wav.c:345:48: note: directive argument in the range [1, 2147483647]
snprintf(channelname, sizeof(channelname), "CH%d", i + 1);
^~~~~~
src/input/wav.c:345:5: note: ‘snprintf’ output between 4 and 13 bytes into a destination of size 8
snprintf(channelname, sizeof(channelname), "CH%d", i + 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The previous implementation accepted either empty integer or empty
fractional parts of a floating point number, but also when both parts
were missing ("." input). Insist in at least one of the parts to be
present.
Programmatic output of floating point numbers might choose to print
spaces instead of an explicit '+' sign, to align the output with the
result of formatting negative numbers yet achieve a screen appearance
similar to what humans would have written. Skip leading whitespace
before insisting in seeing either signs or digits or decimals.
Accept numbers like "123." where the period (dot) is present yet the
fractional part is empty. Adding a period but no additional digits is a
popular method of turning an otherwise integer literal into a float.
Compilers and strtod() routines accept this notation, too, so we have to
expect seeing such input.
The VCD specification requests that timestamps will strictly increase as
one advances through the file. Add another check where the previous
implementation resulted in a tight loop and made the application stall.
Do print an error message and abort file processing in that case.
This fixes bug #1250.
Adjust the calculation of the '^' marker's position in T: lines of the
-O ascii/bits/hex output modules such that it matches the sample data
lines' layout. Add comments which discuss the motivation of the marker
position's calculation, which differs among each of those modules.
Strictly speaking -O bits was already correct. But I chose to adjust and
comment the logic such that multiple output modules follow a common
pattern. If performance is an issue, the bits.c change might be worth
reverting.
This commit fixes bug #1238.
- add support for multiple transfers.
- set nummber of samples to 1 for FPGA FW version 0
- increase size of data transfer buffer to 2kB.
Signed-off-by: Andrej Valek <andy@skyrain.eu>
Callback for data transfer is separated from status. This change will be
used for better data transfer sending/receiving. Cast signal, that trigger
has been captured was moved into state: H4032L_STATUS_FIRST_TRANSFER.
Signed-off-by: Andrej Valek <andy@skyrain.eu>
- get FPGA version in dev_open
- enable some features only for newer FPGA
- decrease printing number of message of FPGA version
Signed-off-by: Andrej Valek <andy@skyrain.eu>
Split the creation of channels and groups as well as the creation of the
session feed buffer into separate routines. Re-allocate the buffer after
reset but do not re-create the channels and groups.
This implementation assumes that after reset() of the input module, the
very same set of channels (including their order, names and enabled
state, as well as group membership) results from processing the
subsequently fed file content. Reading rather different configurations
from the same input file by means of repeated reset and re-read may not
work as expected.
Explicitly check GString pointers for validity before calling glib
routines that would access string content. This silences an assertion
error for a non-fatal runtime condition:
(process:17044): GLib-CRITICAL **: g_string_free: assertion 'string != NULL' failed
Rephrase common input reset logic such that additional common code can
execute after the individual module's reset callback. No behaviour has
changed, the module's reset callback still is optional, and identical
log output gets emitted.
Do clear the sdi_ready flag in the common sr_input_reset() routine, so
that all input modules will parse header information again before
processing sample data when subsequent calls receive new file content.
Void the input module's receive() buffer from common reset code. This
unbreaks the feature of re-reading previously consumed input files.
Extend comments in the common reset and free code paths, which involve
the modules' reset and cleanup routines, which interact in non-trivial
ways. Discuss the responsibilities of common and individual routines, to
remain aware during maintenance.
Acquisition won't work correctly in a multi-threaded environment, when
config_set() and config_get() are called with a channel group.
The channel switching itself has moved to scpi/scpi.c, to be able to
handle switching in a thread safe way.
Use of the thread safe SCPI functions, so no write+read operation is
interruped.
Also return float values instead of double value in acquisition mode.
This is related to bug #779.
This ensures that SCPI read/write/write+read operations are thread safe.
F.e.: If a write operation expects a return value (in other words: a
read operation), it is not allowed to be interrupted by another write
operation.
To simplify things, the SCPI helper functions are moved from
scpi/helpers.c to scpi/scpi.c and also are renamed to fit the naming
scheme.
libgpib in particular will abort the program execution in case of
concurrent operations.
The chronovu_la8 input module is capable of handling either file type,
generated by LA8 or LA16 vendor software. Automatic detection is not
available, but user provided channel counts work fine.
Adjust the input module's name and description, and claim support for
.kdt as well as .kd1 files.
Add developer notes on implementation details, the file content's
constraints, and potential future adjustment.
The file format is funny, a data part is leading (fixed size) and a
"header" part follows. The previous implementation sent the header part
to the session, too, pretending it was part of the data. This change
limits the number of samples that get sent to the session.
Comment on the file layout and header fields while we are here. This
information got lost in commit 02e24c0ce0 when the input module got
converted from do-it-yourself file operations to having intrinsic
handler routines invoked from common logic which handles the file.
Prefer the more portable UINT64_C() macro over the UL suffix when a
literal needs to span "more than 31 bit positions". Adjust other
locations for consistency across the source file.
Commit 8c4bff1d25 introduced a routine which prints what mostly should
be text, and avoids non-printable characters. This implementation used an
incorrect format string, which could result in data getting written past
the end of a buffer. Fix the format string.
src/hwdriver.c: In function ‘log_key’:
src/hwdriver.c:648:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
^~
src/hwdriver.c: In function ‘check_key’:
src/hwdriver.c:681:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
^~
src/hardware/siglent-sds/api.c:596:3: warning: Argument to g_free() is the address of a global variable, which is not memory allocated by malloc()
g_free(cmd);
^~~~~~~~~~~
src/hardware/siglent-sds/api.c:641:3: warning: Argument to g_free() is the address of a global variable, which is not memory allocated by malloc()
g_free(cmd);
^~~~~~~~~~~
Reported by scan-build:
src/hardware/lecroy-xstream/protocol.c:680:12: warning: Potential leak of memory pointed to by 'analog.data'
return SR_ERR;
^~~~~~
Reported by scan-build:
src/input/logicport.c:1186:18: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
.format_match = format_match,
^~~~~~~~~~~~
Log determined header format when parsing trace32 file headers. Keep
another log message during regular processing, but silence it during
format match.
Use more appropriate data types for local and instance variables. Adjust
format strings accordingly.
There were several issues with the previous implementation of the logic
which parses trace32 input files: A string comparison was inverted, and
compared a seven character literal to a five character copy of the input.
One more character was trimmed before CTRL-Z (the CP/M EOF), which often
is SPACE in input files, but might be excessive on other input files.
Replace a DIY character search while we are here. Use symbolic names for
special characters. Factor out a test and memory release, to simplify
error code paths in the remaining logic. Extend comments.
There is not much point in log messages about format mismatch in the
auto detect phase, where each module gets queried in turn and most are
supposed to not match.
Do not print non-printable characters in log messages. Those could occur
in the format detection phase, or in the regular processing of input
files that either are unexpected or invalid (or is there a binary header
format variant even?).
Although the file format handled by this input module appears to be of
fixed size (8MiB plus 5 more bytes), it's more reliable to use a data
type for the file size that is larger than "an int". Although off_t
would be most portable, use uint64_t to match the code which passes the
parameter to the input module.
The previous implementation already was inconsistent (used to allocate
255 bytes and claimed that 128 bytes were sufficient). While existing
formats already required more than a few bytes of input (regular VCD
files' header sections exceed 255 bytes length).
Increase the buffer size that gets passed to input modules' match
method. Use 4MiB for consistency with other locations. Do not enforce a
minimum size, as there are valid input files which are shorter than 128
bytes. Auto-detection failed on those.
This addresses part of bug #1200.
When users don't specify the input format, applications can try to have
the format auto-detected. Some of the tests were weak and could result
in false positives.
Add a 'confidence' parameter to the input modules' format_match()
method. Claim high confidence (1) for those formats which can check
magic strings or the presence of essential keywords (vcd, wav). Claim
medium confidence (10) for those formats which happened to mis-detect
inputs in the past (trace32_ad). Claim weak confidence (100) for those
formats which totally lack reliable conditions and rather guess than
detect (chronovu_la8).
Prefer the best match in public scan routines. Return at most one module
to callers even if multiple modules matched, to keep the current API.
This addresses part of bug #1200.
Implement an input module for .lpf files, the "LogicPort File" format of
the Intronix LA1034 vendor software. This version supports wires with
enabled and inverted state, compressed samples, signal names, signal
groups (but not multiple assignment), and automatic format detection.
The logic which determines whether "the file header" was completely
received, and sample data can get sent to the session, implements an
assumption in the absence of a better and more reliable condition.
Invalid input gets rejected, but diagnostics is rather limited. Since
all channels get to be the member of a channel group, either specified
by the user in the input file, or arranged for in the input module, the
"missing separator" part of bug 1186 has become obsolete.
src/analog.c:205:23: warning: declaration of ‘i’ shadows a previous local [-Wshadow]
for (unsigned int i = 0; i < count; i++) {
^
src/analog.c:178:18: note: shadowed declaration is here
unsigned int b, i, count;
^
[...]
src/analog.c: In function ‘sr_analog_to_float’:
src/analog.c:194:9: warning: declaration of ‘offset’ shadows a previous local [-Wshadow]
float offset = analog->encoding->offset.p / (float)analog->encoding->offset.q;
^~~~~~
src/analog.c:177:8: note: shadowed declaration is here
float offset;
^~~~~~
Allow developers to specify the (default) number of frames at compile
time (default to "off" as before). Accept the frame limit spec at scan()
time as well. This is useful when applications don't run config_set() at
runtime.
Tested with:
$ pulseview -d demo:logic_channels=0:analog_channels=1:limit_frames=4
The previous implementation supported the generation of frames as a
compile time option. This change lets users adjust the feature at
runtime.
In the absence of a frame count limit no frame begin/end markers get
sent (the default behaviour of the previous implementation). When a
frame count limit is specified, the respective number of frames gets
sent and acquisition stops.
The fixed amount of 1000 samples per frame is an arbitrary choice. This
compile time option is easily adjusted in the source code.
Introduce support for the "graycode" logic pattern. Generate up to
64 bits of graycode output (all logic lines, no repetition, not limited
by the generator's internal pattern buffer). The implementation was
tested with 16 channels.
Keep a context variable around with a bit mask for all logic channels.
This is convenient in setup and generation routines, to avoid garbage
in unassigned bit positions of session feed packets.
Move the declaration of codes for pattern types before the declaration
of the context container such that the latter can reference the former.
Add 'int' to an unsigned variable that omitted the base type.
When auto-detection tries to find the input module that can handle a
file, unexpected input format should be considered non-fatal. Only emit
error messages when process_header() got invoked from process_buffer()
after initialization. Emit debug messages in early stages where no input
module context exists yet.
The initial voltage threshold in dev_open() was being set to a
default value in the devc->cur_threshold variable but not actually set
in the device itself.
Patch by Jörg Alpers <jalpers@gmx.net>, thanks a lot!
- fix LIBUSB_TIMEOUT errors
- fix same data receiving
- send reset vendor request before new data getting
- decrease USB polling timeout
This fixes bug #1190.
Signed-off-by: Andrej Valek <andy@skyrain.eu>
- use pragma to handle different behavior between gcc and minGW bit-field packing
- bit-field integer variables needs to be align to 2-byte boundary
Compiler does not produce an error when accessing into non-__packed pointer.
However, the field might not be properly aligned for this type.
More information could be found on:
- https://sourceforge.net/p/mingw-w64/bugs/275/
- http://www.keil.com/support/man/docs/ARMCC/armcc_chr1359124990875.htm
Signed-off-by: Andrej Valek <andy@skyrain.eu>
Before this change, the loglevel check would only be performed for the
default log handler in libsigrok, but not for other handlers set
via sr_log_callback_set().
This fixes bug #698.
A local buffer was too small, snprintf() was used to write the
name of the analog-1-1-xxx ZIP archive names in that buffer.
Due to the limited size, only 3 characters were usable for the last
number component, i.e. the code would loop around from analog-1-1-999
to analog-1-1-100 (instead of analog-1-1-1000).
As a quickfix, increase the buffer size by a large margin, a nicer
fix should be used later on.
These trigger quite often with unrelated devices and confuse people.
scpi_usbtmc: Failed to get configuration descriptor: LIBUSB_ERROR_NOT_FOUND, ignoring device.
The Modbus RTU implementation was inappropriately returning lengths
from the serial functions when the calling functions expect only an
sr_error_code value.
Make sure to not exceed the ctx->analog_samples[] array bounds. Don't
use the (huge) channel's index in the device's(!) channel list, instead
use the zero-based and dense index into the array of analog samples in
the accumulation buffer, before writing to the external file.
This fixes the segfault reported in bug #1124.
The process_analog() logic is rather complex, dealing with the total
list of channels in the device (which can be of different types), and a
number of submitted samples for a specified list of channels. Replace
the rather short variable names for i, j, c (and num_channels) with
something longer that hopefully increases readability of the complex
loop bodies.
Note that this change merely renames identifiers, and does not change
behaviour.
Instead of nesting indentation levels upon equality of a value, skip
iterations upon inequality. This reduces indentation, and might improve
readability.
[ Indentation changes, see 'diff -w -b' for the essence. ]
Use serial_readline in acquisition mode, otherwise data from the
Re:load Pro could get lost.
Use reloadpro_receive_data() for all commands when in acquisition
mode. When not using a single point of receiving data, data could get
lost.
Prefer sigrok's endianess conversion helper over the inet htons()
routine which is harder to read (is "network order" little or big?).
Writing the conversion results in units of bytes also avoids misaligned
memory access. The header length is odd, each payload item got written
as an uint16_t item to an odd address.
The config.h file must always be included as first file.
src/output/csv.c: In function 'gen_header':
src/output/csv.c:64:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
#define LOG_PREFIX "output/csv"
^
./src/libsigrok-internal.h:753:42: note: in expansion of macro 'LOG_PREFIX'
#define sr_info(...) sr_log(SR_LOG_INFO, LOG_PREFIX ": " __VA_ARGS__)
^
src/output/csv.c:244:3: note: in expansion of macro 'sr_info'
sr_info("Set sample period to %" PRIu64 " %s",
^
src/output/csv.c: In function 'dump_saved_values':
src/output/csv.c:462:34: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
g_string_append_printf(*out, "%" PRIu64 "%s",
^
In file included from src/hardware/ftdi-la/protocol.c:21:0:
src/hardware/ftdi-la/protocol.c: In function 'send_samples':
src/hardware/ftdi-la/protocol.h:28:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
#define LOG_PREFIX "ftdi-la"
^
./src/libsigrok-internal.h:751:42: note: in expansion of macro 'LOG_PREFIX'
#define sr_spew(...) sr_log(SR_LOG_SPEW, LOG_PREFIX ": " __VA_ARGS__)
^
src/hardware/ftdi-la/protocol.c:29:2: note: in expansion of macro 'sr_spew'
sr_spew("Sending %" PRIu64 " samples.", samples_to_send);
^
Optionally create multiple analog channels in serial-dmm's scan()
routine. Allow the meters' parse routines to fill in more than one
analog value from the inspection of a single packet.
Use "large" (4 times 14 bytes) packets for the Metex M-3860M and the
PeakTech 4390A meters, and have those large packets parsed by wrapping
the routines for regular 14-byte Metex packets, and sending four values
to the session bus after reception of one large packet.
Thanks to Frank Stettner <frank-stettner@gmx.net> for testing and
fixing the initial implementation of this extension.
Move the initial assignment to the 'offset' variable to the very spot
where it gets evaluated and subsequently manipulated.
Replace a DIY copy loop with the corresponding memmove(3) call.
Also use "r" and "f" as trigger slope values for now, since that's
what most other drivers do currently.
This also fixes two scan-build issues:
api.c:559:3: warning: Value stored to 'tmp_str' is never read
tmp_str = g_variant_get_string(data, NULL);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
api.c:561:9: warning: Use of memory after it is freed
ret = siglent_sds_config_set(sdi, "%s:TRSL %s",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The strcasestr() function is non-portable (e.g. not available on
MinGW, possibly elsewhere). Replace it with g_strstr_len() for the time
being. While the latter is not case-insensitive it appears that
that property doesn't matter here ("." should not be relevant anyway,
and e.g. an SDS1202X-E does indeed report "Mpts" as such).
Should it become necessary to have this code be case-insensitive,
we'll have to find a more portable solution than strcasestr().
This causes some compile errors on platforms where RPC is not available, e.g.
siglent-sds/api.c:25:21: fatal error: rpc/rpc.h: No such file or directory
Surrounding the #include (and later code) with "#if HAVE_RPC" should avoid
these compile errors, but since it's not used at all for now, drop it.
Make the USB reset for USB TMC devices conditional. Check a whitelist,
which in this implementation exclusively contains the Siglent VID.
The whitelist's comment may need adjustment. The VID probably not only
applies to SDS devices, but could be used for SDG and others as well.
And lsusb output suggests the VID is used by Atten, too.
Add the Siglent's VID to a list of blacklisted USB TMC devices.
Unconditionally reset USB devices in the open routine.
This was taken from marchel's development for Siglent SDS. Though the
reset should probably be conditional, and only get applied to devices
which are known to need it.
The comment may need adjustment, maybe individual PID entries are
required. The VID probably not only applies to SDS devices, but could
be used for SDG and other gear as well. And lsusb output suggests the
VID is used by Atten, too.
Implement a first version of the driver for the Siglent SDS1000 and
SDS2000 oscilloscopes.
[ gsi: This commit corresponds to git 0228126017e6 of marchelh's tree,
I adjusted the source to closer match the project's coding style. The
conversion was verified by this command:
$ git diff --word-diff=color -w -b <branch>:<dir> <branch>:<dir>
Changes include: Whitespace adjustment, dead code removal, separation
of variable declaration and assignment, alpha-sorted includes. Line
length was not addressed and not every location got adjusted, to keep
the diff minimal and to reduce effort during review of this version. ]
Check for successful allocation before accessing struct members. Return
with an error from device initialization when allocation fails.
This was reported by clang's scan-build.
Make sure to release the allocated "pod enabled" memory, too, when SCPI
communication during channel setup fails. Defer the return with an error
(instead of duplicating the free() invocation).
This was reported by clang's scan-build.
The compiler marks a potential use after free, which the current
implementation won't trigger. The error only occurs when a sigrok
channel is neither logic nor analog.
Address the issue nevertheless, to silence the compiler warning, and to
protect against possible programming errors when a future implementation
should support more channel types.
This was reported by clang's scan-build.
Fixup unbalanced braces for more complex if statements, to better
reflect the project's official coding style.
Adjust data types in the float_to_le() routine. A float value gets
copied to a buffer of bytes (uint8_t). Don't use 'char' on the other
side of assignments, to not assume a specific width for char, and to
avoid potential signedness issues. Copy from bytes to bytes instead.
The WAV output module supports an optional 'scale' factor, in its
absence the samples will pass unmodified. The builtin help text is
unexpected, and reads:
$ sigrok-cli -O wav --show
...
Options:
scale: Scale values by factor (default 0.0)
Setup a default scale factor of 1.0, which results in identical
behaviour and better reflects what is happening.
The previous implementation only emitted data for the first enabled
channels, and "saw no changes" after emission of the initial value for
channels on positions that followed a disabled channel.
Assume that the received data from the session bus communicates the bits
of enabled channels in a packed representation. Skip the mapping of
output bit indices to sigrok channel numbers.
This fixes the remaining part of bug #519.
Tested by inspecting in gtkwave the result of command:
$ sigrok-cli -d demo -C D1,D3,D6 -c samplerate=2M --samples 2500 -O vcd -o trace.vcd
When we find that all input sources (device drivers, and input modules)
provide a dense bit field, all of the mapping logic can get removed
here. This commit just quickly disables the logic.
Identifiers for channels in the VCD header section could be "sparse"
when sigrok channels were disabled. Make sure to not assign names to
disabled channels. This will e.g. assign !, ", and # to channels D1, D3,
and D6, when D0, D2, D4-D5, and D7 are disabled.
This addresses part of bug #519.
Few DMM drivers already did it. This commit adjusts the remaining DMM
drivers, to set the "DC" flag for measurements in diode mode.
This fixes bug #144.
Although I don't have the hardware to test, the nature of the change and
the arrangement of driver code suggests it's good. When a meter already
communicated the "DC" status, the change does nothing and won't harm.
The change ensures "DC" is flagged for those meters which previously
didn't, which is desirable.
Some SCPI based drivers fail to convert response data, because strutil
conversion helpers sr_atol() and sr_atof() don't like trailing spaces
after the number's text that successfully got converted.
It's yet to get determined whether all call sites of the conversion
routines like their eating adjacent whitespace. But given that the
conversion routine explicitly checks for end of the string after the
number, no call site should expect or even depend on trailing text to
keep its whitespace.
See bug #788 for a discussion and example data.
Synchronize sr_parse_sizestring() with sr_si_string_u64() capabilities.
Add support for the T/P/E suffixes. Since this conversion helper deals
with integer values exclusively, there is no issue with case insensitive
matches. The value cannot be pico. Neither is there an ambiguity with
the 10e6 notation.
This addresses bug #763.
Fix a style nit while we are here. Put braces around both arms of a
complex conditional.
Explicitly assign NULL to param to avoid the "may be used uninitialized"
warning reported in bug #1094. Behaviour remains unchanged. All references
to the variable were under "if (!conn)", and the assigning arm of the
branch checked for "if (!param)" after assignment. So the error could
not happen, but compilers may not have noticed depending on the width of
their scope during compilation.
Move the initialization of 'conn' closer to the conditional assignment,
such that all paths are seen in one spot during maintenance.
This fixes bug #1094.
Although log messages are terminated by a line feed, output still might
get buffered when the program does not talk to a terminal (that it is
aware of). Add an fflush(3) call to the printf(3) sequence such that log
output will immediately show up when writing to pipes or sockets, too.
Early sr_init() steps can just 'return' fine. After allocation of the
'context' memory, make all error paths 'goto done' before returning,
to undo the memory allocation.
The srzip output module dropped support for the "filename" option in
commit 37875f7506 on 2015-07-30, but still used to assign to slot
options[0] which clobbers the array's sentinel. Remove those accesses
to the non-existing option.
api.c: In function 'config_set':
api.c:352:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'uint64_t' [-Wformat=]
sr_err("invalid sample range 2k...64M: %ld",
^
beaglelogic_tcp.c: In function 'beaglelogic_tcp_send_cmd':
beaglelogic_tcp.c:114:3: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat=]
sr_dbg("Only sent %d/%lu bytes of command: '%s'.", out,
^
Check pointers' validity before dereferencing them. Release partially
allocated memory in an error path. Remove an assignment which never took
effect.
This was reported by clang's scan-build.
Each code path either assigns to 'flags', or leaves the routine. There
is no potential path that leaves the variable at the initially assigned
value, so the assignment took no effect. Remove it.
Nit: Trim the source code line length while we are here.
This was reported by clang's scan-build.
Check pointers' validity before dereferencing them. Explicitly assign a
default value to variables, before conversion routines conditionally
assign the "real" value (and don't in case of conversion errors). This
avoids processing "garbage" data.
Strictly speaking I cannot see how the conversion routine returns OK and
has _not_ assigned a result. But the explicit assignment won't harm
either, and matches the fallback when the conversion fails (detectibly).
Which means that runtime behaviour won't change.
This was reported by clang's scan-build.
Remove an assignment that won't take effect. Check pointers' validity
before dereferencing. Fix a memory leak.
This was reported by clang's scan-build.
Check for successful allocation of multiple memory ranges, and release
partial allocations in the error path when one of them failed. This
fixes a potential memory leak, as well as avoids NULL dereferences.
This was reported by clang's scan-build.
Silence warnings about assigned values that never get used, potential
NULL deference, and potential memory leaks.
This was reported by clang's scan-build.
The scan_2x_bd232() routine used to always prepare one spare context,
and filled it in when a device was found, just to allocate another one
and continue scanning.
Free the last allocated context unconditionally, as it was allocated
unconditionally, and never used.
This was reported by clang's scan-build.
Stick with the prepared but unfinished "limit msec" code path, but
silence the warning about an unused variable value.
This was reported by clang's scan-build.
Avoid a division by zero, by not using a zero unitsize in a modulo
operation. As a byproduct, avoid processing and counting input that
neither has analog nor logic data. This should never have happened,
but the change now catches the error if invalid input is seen.
This was reported by clang's scan-build.
The sr_packet_copy() routine could have written to an arbitrary memory
location. Make sure to allocate the space before writing to it, and
check for successful allocation before accessing the memory.
It's assumed that this error never took effect, as the routine appears
to be unused.
This was reported by clang's scan-build.
The 'opc' variable was only conditionally assigned to (depends on
successful SCPI communication). Ensure there always is a known value.
This was reported by clang's scan-build.
After the first capture ->num_frames never got to be _equal_
to ->limit_frames; fixed by resetting to zero in dev_acquisition_stop(),
and protected against similar problems in the future by switching to
greater-or-equal instead.
[Note: This patch is basically a squashed version of the initial driver
commits by Andreas Zschunke <andreas.zschunke@gmx.net>, two fixes by
Andrej Valek <andy@skyrain.eu>, and various coding style / cosmetic
fixes by Uwe Hermann <uwe@hermann-uwe.de> to make the driver a lot more
consistent with the rest of the libsigrok code-base.]
When refactoring the code, some places where sr_scpi_send was replaced
by rigol_ds_config_set the first argument was not changed from sdi->conn
to sdi. Fix the remaining ones.
Fix: https://sigrok.org/bug/1073
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
This regression was introduced in f1ba6b4b2c.
Due to how the sysclk-lwla driver does up to 3 open/close operations in
one dev_open() API callback we cannot rely on the sr_dev_open() and
sr_dev_close() wrappers setting the sdi->status variable in this case.
Tested on LWLA1034.
When processing of large VCD input files was spread across multiple
parse_contents() invocations, the resulting sigrok stream of sample data
had gaps in them and total timing was off. For instance 74ms of input
data were interpreted as spanning some 600ms or 300ms, depending on the
number of channels in the input stream.
Move the "previous timestamp" variable to the input module context. This
eliminates the inappropriate gaps and fixes the translation of VCD file
timestamps to sigrok sample numbers.
This fixes bug #1075.
Some drivers used locale dependent functions for converting strings
to float/double values. These functions fail when the decimal mark
is a "," in the locale settings but the string contains a ".".
This fixes bug #1064.
A "low samplerate" in this case means anything where
samples_todo is less than SAMPLES_PER_FRAME. This case
wasn't handled properly before, resulting in wrong
amounts of data being sent out.
We can't use the memory size command because it returns
the *maximum* memory used, not the *actual* memory used.
Hence, we only know the number of samples per div once
sample data actually comes in.
As there is a huge range of supported LeCroy scopes, naming
the IDN response for every single one of them is going to be
impossible. Hence, it makes more sense to treat all LeCroy
devices as if they were scopes and supported. This approach
lets users try to see how far they get and if they run into
issues, they can then be treated separately - e.g. by creating
a custom device profile.
Unless we do this, the vast majority of LeCroy scopes will
not be recognized by the driver.
Set samplelimit to a sane value (was causing PulseView to
crash earlier), as well as advertise samplerate using SR_CONF_LIST
so that PulseView can show the sample rates.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
The function drains off all the remaining data in the receive socket
and is triggered before starting a capture and after a capture is
completed. In the absence of this function, there is a possibility of
data corruption and also the NodeJS TCP server throws an error if the
buffer is not completely read out before the socket is closed.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
Uwe Hermann
Frank Stettner
Soeren Apel
Thomas Andres
Michael Klengel
Daniel Anselmi
Wolfram Sang
Gerhard Sittig
Martin Ling
majekw
Mike Williams
Paul
Michał Janiszewski
luftek
Thomas Weißschuh
marchelh
Peetz0r
Andrej Valek
Eva Kissling
Valentin Ochs
Matthias Schulz
Adrian Stratulat
Joerg Alpers
JohnCh
Bastian Schmitz
Sergey Alirzaev
Mandl
Sven Bursch-Osewold
James Churchill
Axel Hinrichs
Romain Tartière
Philipp Marek
Andreas Zschunke
Michał Janiszewski
Stefan Brüns
Holger Müller
Timo Rothenpieler
Sylvain Pelissier
Joel Holdsworth
Kumar Abhishek