5f985df23c
Add support for the UNI-T UT61C multimeter.
2013-12-29 17:35:51 +01:00
683fd16137
fx2lafw: Fix incorrect unitsize when a trigger fires.
...
The unitsize was always being set to 2, regardless of whether an fx2lafw
device with 8 or 16 probes was used.
This fixes bug #182 .
2013-12-29 14:18:51 +01:00
87b545fba4
fx2lafw: Minor cleanups.
2013-12-29 14:18:51 +01:00
0709197deb
rigol-ds: Correct usage of NUM_TIMEBASE and NUM_VDIV config keys.
2013-12-29 13:22:32 +01:00
bc7b7eb196
scpi: Strip trailing newline from *IDN response if present.
2013-12-29 13:22:31 +01:00
b178c79d35
victor-dmm: Fix MIN/MAX always being reported.
...
This fixes bug #228 .
2013-12-29 12:33:10 +01:00
8b2d41edb3
demo: Analog probe support.
2013-12-29 10:58:56 +01:00
c07f60e73d
demo: User-configurable number of probes.
...
The sigrok and incremental patterns repeat every 8 probes, shifted by
one probe.
2013-12-29 10:58:56 +01:00
05c644ea08
Revise SCPI read API to allow backend-independent data handling.
2013-12-29 04:26:36 +01:00
227a0981c0
rigol-ds: Support the rest of the DSO1000 range.
2013-12-29 01:39:49 +01:00
821fbcadcc
rigol-ds: Support 4 analog channels.
2013-12-29 01:34:58 +01:00
0d9f5a12cb
rigol-ds: Use correct live waveform size for Agilent DSO1000 series.
2013-12-29 00:35:09 +01:00
10afee13a3
rigol-ds: Add support for Agilent DSO1014A.
2013-12-29 00:27:11 +01:00
77c16c0463
scpi: Log IDN? result.
2013-12-29 00:26:54 +01:00
07ccb2b3f1
rigol-ds: Fix rigol_ds_channel_start() for digital channels.
2013-12-28 14:05:56 +01:00
9e4b7d9833
rigol-ds: Use correct analog frame size for VS5000 series.
2013-12-28 14:05:56 +01:00
6396b0a76b
rigol-ds: Use set_cfg wrapper for capture setup commands.
2013-12-28 14:05:56 +01:00
1fed20cb38
rigol-ds: Select channels before issuing RUN command.
2013-12-28 14:05:55 +01:00
48460c6f3e
rigol-ds: Unify partial read handling.
2013-12-27 22:47:42 +01:00
f80a0bf232
rigol-ds: Unify code for counting expected incoming bytes.
2013-12-27 22:47:42 +01:00
677f85d00b
rigol-ds: Use rigol_ds_channel_start() function for legacy protocol too.
2013-12-27 22:47:42 +01:00
0d87bd93eb
rigol-ds: Rename and document some confusingly named variables.
2013-12-27 22:47:42 +01:00
c36923b03b
asix-sigma: fix incorrect pointer cast (non-aligned memory and endiannes issue)
...
This fixes the following warning:
asix-sigma.c: In function 'receive_data':
asix-sigma.c:1064:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
devc->state.lastts = *(uint16_t *) buf - 1;
^
2013-12-27 17:36:08 +01:00
9ee78f2347
appa-55ii: Don't use _t suffix for a typedef.
...
Names ending with _t are reserved for POSIX.
http://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html
(last line in table 2)
2013-12-27 17:27:52 +01:00
53cd1c78f5
hameg-hmo: Support DC LINE coupling.
2013-12-27 16:28:42 +01:00
b95dd7619d
log prefixes: Cosmetics, consistency fixes, typo fixes.
2013-12-27 13:17:20 +01:00
3544f848e0
Centralise duplicated logging helper defines.
2013-12-27 12:54:05 +01:00
dafafb0e94
teleinfo: Minor cleanups.
2013-12-27 12:27:52 +01:00
76b4d4f422
appa-55ii: Minor cosmetics, whitespace fixes.
2013-12-27 12:27:52 +01:00
27fd2eaacb
gmc-mh-1x-2x: Use standard API callback names for now.
...
If multiple functions need to be differentiated later, we can bring
back more specific names.
2013-12-27 12:27:49 +01:00
873e0c1295
gmc-mh-1x-2x: Don't put driver-specific things in sr/SR namespace.
2013-12-27 12:27:49 +01:00
3a6095d005
gmc-mh-1x-2x: Use 'di' variable to match other drivers.
2013-12-27 12:27:49 +01:00
ec29a878e0
gmc-mh-1x-2x: Fix two compiler warnings.
2013-12-27 12:27:49 +01:00
fc348b770a
gmc-mh-1x-2x: Cosmetics, whitespace, cleanups.
2013-12-27 12:27:49 +01:00
7574e58c1a
appa-55ii: Coding style fixes.
2013-12-23 01:53:30 +01:00
81a9ab725f
appa-55ii: driver implementation with Live and Memory data source support
2013-12-23 01:21:52 +01:00
5e7a8e57d4
appa-55ii: Initial driver skeleton.
2013-12-23 01:21:51 +01:00
61c39f54bb
demo: Code cleanup.
2013-12-22 23:47:50 +01:00
34ea7f9695
Windows usb: don't try to resume thread if shut down in callback.
2013-12-22 17:38:24 +00:00
6640324f7f
usb: Enforce that there can only be one USB event source for now.
2013-12-22 17:27:13 +00:00
b5328e1dfa
Windows usb: Unlock mutex when shutting down wait thread.
2013-12-22 17:10:57 +00:00
589edd9b81
Winsock2.h must be included before anything that includes Winsock.h.
2013-12-22 14:59:43 +00:00
5321ac6b52
Implement usb_source_add and usb_source_remove for Windows.
2013-12-22 07:16:56 +00:00
6c60facc19
Use common usb_source_add and usb_source_remove functions.
2013-12-21 23:09:23 +00:00
ba1949f583
Use new libserialport event set API to make GPollFDs for serial sources.
2013-12-21 19:38:45 +00:00
95ecc76546
bbcgm-m2110: Minor cosmetics.
2013-12-19 00:40:31 +01:00
825da8b20f
serial-dmm: Add BBC Goerz Metrawatt M2110 DMM driver.
2013-12-19 00:40:31 +01:00
5d03743096
serial-dmm: Commented struct dmm_info.
2013-12-19 00:40:31 +01:00
e9a6213976
hameg-hmo: Move the declaration of the driver info out of protocol.h
...
This fixes duplicate symbol error on Mac OS X.
BugLink: http://sigrok.org/bugzilla/show_bug.cgi?id=216
2013-12-18 22:17:30 +01:00
cb7b165b3d
serial.c: Show both error code and error message.
...
This is helpful in many cases, e.g. when trying to identify which of the
16000 system error codes from
http://msdn.microsoft.com/en-us/library/ms681381%28VS.85%29.aspx
has been encountered (which is not trivial if you only have an,
e.g. German, string message alone).
2013-12-17 17:46:24 +01:00
04cb915716
Improved doxygen docs.
2013-12-09 15:17:17 +01:00
854434de0b
Use std_serial_dev_open().
2013-12-07 21:54:08 +01:00
d43b090816
std: Standardize function name.
...
std_dev_acquisition_stop_serial() is now std_serial_dev_acquisition_stop().
2013-12-07 21:23:39 +01:00
b6eb8252e5
Remove now-unused fd field from struct sr_serial_dev_inst.
2013-12-07 19:43:47 +00:00
bf72f64999
ols: Get fd from sp_get_port_handle() rather than serial struct.
2013-12-07 19:43:47 +00:00
64ecf7ee52
Eliminate internal usage of serial->fd in serial.c.
2013-12-07 19:43:47 +00:00
a0a4c0fb09
Use sp_get_port_handle to get an fd for adding/removing serial sources.
2013-12-07 19:43:47 +00:00
af473e0eb2
brymen-dmm: Use port name instead of fd in debug message.
2013-12-07 19:43:47 +00:00
bf2c987fde
Use std_serial_dev_close() to replace matching dev_close functions.
2013-12-07 19:43:47 +00:00
7faa3e8821
Route sr_source_remove for all serial devices through a wrapper.
2013-12-07 19:43:47 +00:00
abc4b3356d
Route sr_source_add for all serial devices through a serial_source_add wrapper.
2013-12-07 19:43:47 +00:00
b4936bae0a
rigol-ds: close SCPI device after using for scan.
2013-12-07 19:43:47 +00:00
721fc2272e
scpi_serial: Iterate serial_write as necessary to send full commands.
2013-12-07 19:43:47 +00:00
0f4a435057
scpi_tcp: must define _WIN32_WINNT to 0x0501 or higher to get getaddrinfo().
2013-12-06 03:24:30 +00:00
987a053084
scpi_tcp: Fix building on Windows.
2013-12-06 02:33:05 +01:00
b9a5614dbf
zeroplus: Rework triggerbar/trigger address logic
...
This reworks the triggerbar/trigger address logic to match the values sent
by the windows app for all models (The zerominus tool was used to reprogram
the USB device ID on a single device). Additionally, the DONT_CARE_TRIGGERBAR
register is always set by the windows app and does not seem to indicate that
these registers are "don't care"'s.
2013-12-05 01:09:51 +01:00
c38e64c742
zeroplus: Clip sampling sizes larger that our sample memory
...
Otherwise, we'll return a non-sensical result for our memory_size
enumeration.
2013-12-05 01:09:51 +01:00
3e43da1f70
zeroplus: Add support for additional memory sizes
...
The zeroplus can have up to a 8M SRAM. Avoid some extensive if/else
blocks by noting that all sizes except the first are related by their power
of 2.
2013-12-05 01:09:51 +01:00
e93fb98b8a
zeroplus: Rename max_memory_size to max_sample_depth
...
This private variable is measured in samples, not bytes. Avoid confusion
by renaming it.
2013-12-05 01:09:51 +01:00
d20844e28b
zeroplus: Just wait until not busy on data capture
...
While captures using a trigger do set the STATUS_READY bit, immediate
captures do not set the STATUS_READY bit, they just clear the STATUS_BUSY
bit. This was confirmed with packet captures using the "official" driver/app.
2013-12-05 00:41:22 +01:00
60cc6f8579
zeroplus: Add usb IDs for 32 channel models, but only use 16 channels
...
The code needs some work to support 32 channels. Until then, support
the 32 channel models, but only allow the use of 16 channels.
2013-12-05 00:41:22 +01:00
7cf1a98d73
rigol-ds: Minor error reporting fix.
2013-12-05 00:21:15 +01:00
91e406b921
scpi/usbtmc: Prototype fixes.
2013-12-05 00:16:11 +01:00
bc03a7cc2c
scpi/serial: Use stubs for all SCPI functions.
...
Avoids some gcc warnings, since the SCPI prototypes don't exactly
match serial_*.
2013-12-05 00:09:34 +01:00
962af1a379
rigol-ds: Support VS5000 series devices.
2013-12-04 21:38:05 +00:00
b8705e99e4
scpi_tcp: Adjust to observed protocol for Rigol VS5000 series.
2013-12-04 21:32:47 +00:00
3520422fc7
rigol-ds: Support TCP connection.
2013-12-04 20:59:24 +00:00
08a359138b
Add implementation for SCPI over TCP.
2013-12-04 20:59:20 +00:00
56868b5d6b
rigol-ds: Handle partial analog frame reads.
...
Reading a frame over the DS1xx2 RS232 connection now sometimes works,
but most of the time stalls part way through with g_poll showing the
fd as not ready.
2013-12-04 13:31:42 +00:00
9dfeb81b09
scpi_serial: Flush buffers after opening port.
2013-12-04 13:03:23 +00:00
0dc7b43eb7
rigol-ds: Support RS232 connection.
...
Probing tested OK over RS232 for DS1052E and DS1102D. Capture needs work.
2013-12-04 12:50:12 +00:00
4d7a9a14a3
rigol-ds: Eliminate fixed-size buffer in set_cfg.
2013-12-04 10:56:09 +00:00
87c410830d
Add sr_scpi_send_variadic() function.
2013-12-04 10:53:51 +00:00
17b5b20264
Replace rigol_ds_send() function with sr_scpi_send().
2013-12-04 10:30:46 +00:00
504f40a574
Make sr_scpi_send() take printf-style arguments.
2013-12-04 10:30:43 +00:00
ae1bc1cc26
Port rigol-ds driver to use common SCPI functions.
2013-12-03 23:19:40 +00:00
a1ff9c1897
Add sr_scpi_read() operation for reading arbitrary data.
2013-12-03 23:18:37 +00:00
31034792da
Implement SCPI over USBTMC.
2013-12-03 22:25:33 +00:00
23f43dff15
Make SCPI functions device independent, with separate serial backend.
2013-12-03 22:00:31 +00:00
082972e8c5
hameg-hmo: Reduce unnecessarily high nesting level.
2013-12-03 17:13:50 +01:00
719eff68ad
hameg-hmo: Use hmo_ prefix for driver-local SR_PRIV functions.
2013-12-03 16:58:34 +01:00
89280b1a4c
hameg-hmo: Minor cosmetics, coding-style fixes.
2013-12-03 16:48:21 +01:00
d5976d8be5
scpi.c: Minor cleanups, cosmetics.
2013-12-03 16:08:59 +01:00
13f2b9d789
hameg-hmo: Add initial working driver version.
...
This patch adds initial support for Hameg's HMO oscilloscopes. It currently
supports only the HMO compact series (70MHz-200MHz).
2013-12-03 15:13:30 +01:00
06a3e78adb
hameg-hmo: Initial driver skeleton.
2013-12-03 15:13:30 +01:00
1bd9e678ac
serial: Add function to extract serial options.
...
This patch adds a function for a common operation of all serial based drivers.
It extracts the serial options from the options linked list that is passed down
to every hardware driver.
2013-12-03 15:10:01 +01:00
1a323dd887
scpi: Add function to fetch uint8_t.
...
This patch adds a function to read and parse a SCPI response which contains a
comma separated list of unsignet 8-bit integer numbers (e.g "1,0,64").
This is particularly useful if the instrument sends digital measurement data
in this format.
2013-12-03 15:10:01 +01:00
8acbb89a1d
scpi: Add function to get an array of floats.
...
This patch adds a function to read and parse a SCPI response which contains a
comma-separated list of floating-point numbers (e.g. "1.0e-5,2.0e-4,3.0e-3").
This is particularly useful if the instrument sends analog measurement
data in this format.
2013-12-03 15:10:01 +01:00
f5922adef5
scpi: Add a function to read and wait on a *OPC? reply.
...
The SCPI standard specifies the "*OPC?" command (Operation complete query) which
queries the instrument for its operative state. When all pending operations are
complete, the instrument responds with a "1".
Some manufacturers block before completing all operations and don't respond
with anything and some of them respond with a "0". This function handles both
cases uniformly.
2013-12-03 15:10:01 +01:00
d730f70e06
scpi: Add more functions (getting int/bool/float/double).
...
This patch adds helper functions to read an SCPI response and parse the response
as an integer, boolean, floating-point or double-precision floating-point number.
2013-12-03 15:10:01 +01:00
aa1e3b400b
scpi: Add function to strictly parse bool strings.
...
This patch adds a function that is similar to sr_parse_boolstring but its
matching rules are more strict.
2013-12-03 15:10:00 +01:00
7b9d732031
scpi: Add helper functions for SCPI communication.
...
The Standard Commands for Programmable Instruments (SCPI) defines a standard
for syntax and commands to use in controlling programmable test and measurement
devices.
SCPI documentation:
http://www.ivifoundation.org/docs/scpi-99.pdf
This patch adds helper functions for sending SCPI commands, reading a SCPI
response and reading and parsing a SCPI "*IDN?" response.
2013-12-03 15:10:00 +01:00
66a4357667
serial-dmm: No error message upon 0 new bytes.
2013-12-01 19:30:35 +01:00
9647ce694b
Use new libserialport blocking/nonblocking API calls.
2013-12-01 18:51:24 +01:00
b3916147a5
rigol-ds: Fix duplicated "LA" probe group.
2013-11-29 01:40:50 +00:00
ae67644fe5
Create & use new sr_usbtmc_dev_inst for Rigol DS driver.
2013-11-29 01:13:22 +00:00
babab6225b
DS2000 sample memory capture patches from Mathias Grimmberger.
2013-11-29 00:57:55 +00:00
355de5a110
Fix handling second channel on DS2000 series.
...
Patch from Mathias Grimmberger.
2013-11-29 00:55:21 +00:00
6ff1394ed1
rigol-ds: brown paper bag, using timebases instead of vdivs.
2013-11-29 00:55:20 +00:00
7cc1a55091
rigol-ds: fix calls to config_list with NULL sdi/devc.
2013-11-29 00:55:20 +00:00
bafd489094
rigol-ds: Add support for DS2xx2 series.
...
Based on patch by Mathias Grimmberger <mgri@zaphod.sax.de>.
2013-11-29 00:53:34 +00:00
3086efdd73
Rename rigol-ds1xx2 driver to rigol-ds.
2013-11-29 00:50:59 +00:00
c4d85a4026
serial.c: Re-enable serial_read() error reporting.
...
libserialport now returns 0 (not SP_ERR_FAIL) as return value when a
non-blocking read would return EAGAIN.
This fixes bug #188 .
2013-11-26 16:29:43 +01:00
25b66c3c61
Use new libserialport opaque configuration structure.
2013-11-26 15:53:40 +01:00
3182932d36
Use accessor for new libserialport opaque port structure.
2013-11-26 15:53:40 +01:00
79b9a237bd
uni-t-dmm: Drop unnecessary DMM count.
2013-11-23 15:24:40 +01:00
5e1f7c890d
uni-t-dmm: Add support for the Tenma 72-7745.
...
This is a rebadged UNI-T UT60E.
2013-11-23 12:50:33 +01:00
a147c7b416
hantek-dso: config_list(): Only SR_CONF_BUFFERSIZE needs sdi.
2013-11-22 22:31:24 +01:00
7c07a1783e
ols: config_list(): Handle SR_CONF_PATTERN_MODE.
...
SR_CONF_PATTERN_MODE was not handled in config_list(), yielding
non-working OLS support in PulseView (due to an assert), and a missing
pattern list in sigrok-cli's --show output.
This fixes bug #184 .
2013-11-22 22:31:08 +01:00
f57924179d
gmc_mh_1x_2x: Completed driver for Metrahit 1x/2x
...
This driver supports devices with “RS232“ interface (Metrahit 16I,
18S, Siemens B1105 tested, 29S incomplete).
2013-11-22 02:42:04 +01:00
a970522b6d
serial: Allow 5 and 6 data bits.
2013-11-22 02:31:17 +01:00
7b4edcb654
gmc_mh_1x_2x: Inital driver skeleton.
2013-11-22 02:31:17 +01:00
13cd8197eb
Update for libserialport v0.1 API.
2013-11-22 02:14:16 +01:00
c4650aca12
Suppress compile warning
2013-11-20 22:06:01 +01:00
61bab807f4
DT4000ZC/TP4000ZC: Force DTR=1 on the serial port.
...
This fixes the driver e.g. on NetBSD.
2013-11-20 00:42:08 +01:00
4403c39fe4
ols: Always open serial port in nonblocking mode.
...
The scan() function was opening the port in non-blocking mode, the dev_open()
function however was not using the SERIAL_NONBLOCK flag. This led to hangs
in certain situations.
This fixes the OLS e.g. on NetBSD.
2013-11-19 23:22:46 +01:00
1a54044299
serial.c: Minor cosmetic fix.
2013-11-19 20:09:59 +01:00
a82635f252
Use new sp_port_config fields.
2013-11-19 14:26:18 +01:00
e385e2ed90
serial: Use new sp_set_config instead of sp_set_params.
2013-11-19 14:26:18 +01:00
066d42b1c8
serial: Fix leak in serial_open.
...
A new sp_port is created every time we call serial_open (sp_get_port_by_name
implicitly creates one for us), so free it every time we call serial_close.
2013-11-19 10:29:24 +01:00
1130e4229b
rigol-ds1xx2: Send a SR_DF_END packet before acquisition stop.
...
Without a SR_DF_END samples could be cached in the internal buffer of an output
module and never flushed, therefore they would be missing in the final output.
By sending a SR_DF_END packet we force the output to be flushed.
2013-11-15 17:00:07 +01:00
449cc16bb2
serial.c: Temporary quickfix until a libserialport fix is done.
2013-11-15 12:23:09 +01:00
26e0361cc6
uni-t-dmm: Drop unused packet_request callback.
2013-11-15 09:36:51 +01:00
c4f2dfd0f0
configure.ac: libserialport is optional.
...
Disable drivers that need serial port support if libserialport is not found.
Also, disable building various other serial port related code in that case.
2013-11-15 09:36:51 +01:00
6a76efebc1
serial.c: Fix a few return values.
2013-11-14 23:48:28 +01:00
a0dfaa6c4c
serial.c: Cosmetics, coding-style.
2013-11-14 23:48:28 +01:00
0d4405ce5e
Update for renamed libserialport header file.
2013-11-14 23:48:16 +01:00
c9bc57b6bc
Update to new libserialport API.
2013-11-14 23:48:16 +01:00
a9bce5a561
Use libserialport for serial port access.
2013-11-14 23:48:16 +01:00
58f4336963
rigol-ds1xx2: Unbreak listing of _VDIV and _COUPLING
2013-11-08 01:03:19 +01:00
5f77dffc02
rigol-ds1xx2: Unbreak listing of SR_CONF_DEVICE_OPTIONS
2013-11-08 01:03:19 +01:00
be60a9e4a9
rigol-ds1xx2: Better error reporting when probe groups are required
2013-11-08 01:03:19 +01:00
78bcc55afa
rigol-ds1xx2: Minor coding style fixes
2013-11-08 01:03:19 +01:00
d3c74a6fb0
probe_groups: API changes required to implement probe groups.
2013-11-08 01:03:18 +01:00
ba358ffd83
rigol-ds1xx2: fix bitrot in device cleanup code
2013-11-08 01:03:18 +01:00
e43fdd8d4f
rigol-ds1xx2: Don't assume valid sdi
2013-11-08 01:03:18 +01:00
45311368de
rigol-ds1xx2: Skip obsolete fields
2013-11-08 01:03:18 +01:00
f48e0249b4
rigol-ds1xx2: implement probe group specific options.
2013-11-08 01:03:17 +01:00
3d3a601e80
rigol-ds1xx2: create probe groups.
2013-11-08 01:03:17 +01:00
8f996b8948
probe_groups: API changes required to implement probe groups.
2013-11-08 01:03:16 +01:00
b775d753e3
rigol-ds1xx2: detect Rigol DS1xx2 with upgraded bandwith
...
The bandwith in Rigol DS1xx2D/E scopes can be upgraded to 150 MHz in software.
So detect also scopes with the upgraded bandwith.
using libsigrok-0.2.1 + this change + commit da970d24ec
2013-11-03 14:20:47 +01:00
3a8cad9137
metex14: Handle a few missing cases for overflow.
2013-10-31 13:47:30 +01:00
88f544f27e
Add support for the Metex M-4650CR.
...
(the Voltcraft M-4650CR is a rebadged Metex M-4650CR)
2013-10-30 14:44:44 +01:00
2b83d7fee1
Add support for the Voltcraft M-4650CR.
2013-10-30 14:44:44 +01:00
e790bd5cda
norma-dmm: Minor cosmetics, coding-style, consistency fixes.
...
Also, add a missing "%" in an sr_err() and a missing parameter in
another sr_err().
2013-10-25 21:25:26 +02:00
f8e76e2e74
norma dmm: Implemented driver.
2013-10-25 21:25:26 +02:00
bfd48770fc
norma dmm: Initial driver skeleton.
2013-10-25 21:25:26 +02:00
50a9aba21b
serial: Removed flag OPOST (turn off all output processing).
2013-10-25 19:11:15 +02:00
a510d55571
serial: Added flags CLOCAL (ignore modem status lines) and CREAD (start receiver).
2013-10-25 19:11:15 +02:00
1b943b6d8b
serial: Added flag IXANY (any char will restart) to XON/XOFF handshaking.
2013-10-25 19:11:14 +02:00
0c30b35fce
saleae-logic16: claim device before using it
...
The kernel warns:
[ 7461.925685] usb 2-4: usbfs: process 11303 (sigrok-cli) did not claim interface 0 before use
2013-10-24 16:01:46 +01:00
5542bee61b
teleinfo: actual parser implementation
2013-10-24 15:41:11 +01:00
8e796cb438
teleinfo: Initial driver skeleton.
2013-10-24 15:41:11 +01:00
c02dc3e261
metex14: Add support for pF (picofarad).
...
This is used on some Metex DMMs.
2013-10-23 18:41:13 +02:00
ee6cb5a417
metex14: Use case-insensitive string compares.
...
This allows some other DMMs to be supported that use e.g. "kOhm" vs.
"KOhm", and so on.
2013-10-23 18:07:54 +02:00
1a807c13fc
metex14: Support DMMs with slightly different protocol.
...
This adds support for DMMs with 5 digits in the protocol (instead of 4)
and some more whitespace variants.
2013-10-23 18:06:15 +02:00
71f1302b4b
metex14: Support DMMs with whitespace differences.
...
Most Metex DMMs use e.g. " mV" as unit field, others use "mV ",
though. Support these (and other) whitespace variants by stripping all
spaces and only comparing non-space characters.
2013-10-23 17:31:14 +02:00
b21d7eebe2
serial: Changed order of flags PARENB and PARODD in deletion to same order as in setting (cosmetic).
2013-10-18 16:58:33 +02:00
df6b0f99af
ISO-TECH IDM103N: remove the useless -ser postfix
2013-10-13 14:54:54 +02:00
94e9021b3e
es519xx: correct initialization of es519xx_info structure
2013-10-13 14:54:54 +02:00
93d719cde6
es519xx: Fix incorrect packet size, and a typo.
2013-10-07 00:36:18 +02:00
72e1672fc9
es519xx: Cosmetics, coding style, minor fixes.
2013-10-07 00:36:18 +02:00
de737bfc11
add ISO-TECH IDM103N serial-dmm driver
2013-10-07 00:36:18 +02:00
c01bdebc57
add cyrustek es519xx generic protocol parser
2013-10-07 00:36:18 +02:00
2f9376117c
fx2lafw: Organize driver into api.c / protocol.[ch].
...
This now matches the naming conventions of the other drivers.
2013-10-06 22:28:45 +02:00
fbf07e0209
agilent-dmm: Fix SEGV during incomplete reply from meter.
...
If buf contains exactly the string "Agilent Technologies" (for example if
there are bugs in the timeout logic or serial driver causing the reply from
the meter to be abridged) then this code will SEGV. This is because tokens[1]
is NULL but only tokens[2] and tokens[3] (both of which are undefined) are
NULL checked.
Can be trivially corrected by NULL checking tokens[1] as well.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2013-10-04 13:30:49 +02:00
5715e84fe3
serial: Only sleep when no characters are received.
...
g_usleep(XX) sleeps for *at least* XX microseconds but may sleep for
longers (on older kernels the sleep will typically be 10000us). Thus
byte receive loops containing an unconditional sleep will perform
very poorly (for example it causes the scan in agilent-dmm to timeout
prematurely).
Even on modern kernels serial_readline() has a 2ms sleep per byte which
means it will read at a maximum rate of half a character per millisecond
(~4800baud).
This is fixed by only sleeping when read() returns no data.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2013-09-26 14:57:37 +02:00
45c0841b25
uni-t-ut32x: Shorten dev_list().
2013-09-25 14:26:35 +02:00
6ebe003985
ols: fixed demux mode disable noise filter
...
Demux flag wasn't getting set off if one non-demux sample was ran
beforehand.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-09-07 20:17:16 +02:00
6a53bde671
ols: Moved FLAG_FILTER to demux check
...
Demux mode was having filter mode set which it doesn't
support per FPGA demon core docs.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-09-06 11:42:25 +02:00
e52bb9be83
Voltcraft VC-830: Fix diode mode handling.
...
This DMM is not using the standard bits in the FS9922 protocol/structure
to indicate the "volt" and "diode mode" flags. Instead, it only sets the
user-defined bit "z1" to indicate both "diode mode" and "volt".
This fixes #142 .
2013-09-01 15:27:21 +02:00
a6ed50f405
es51922/fs9721/fs9922/metex14: Use diode MQFLAG.
...
This fixes #141 .
2013-09-01 15:27:07 +02:00
98494dc8a3
fs9922: Fix typo.
2013-09-01 13:41:13 +02:00
045e9a9918
serial.c: Drop unneeded <glob.h>.
...
This is no longer used, and also it is not available on Android and thus
breaks cross-compilation for Android.
Thanks Marcus Comstedt <marcus@mc.pp.se> for reporting.
2013-08-30 16:35:56 +02:00
b1de040700
ols: fixed channel limit check
...
For demux mode we half the channels. Previous check method broke
the OLS randomly and but it in a bad state.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-30 13:58:36 +02:00
da970d24ec
rigol-ds1xx2: newer Linux kernels have USBTMC in /sys/class/usbmisc
2013-08-30 13:57:45 +02:00
f51acd69d7
ols: combine demux samples
...
demux mode allows DDR sampling which disables group 2 & 3
and thus samples group 0 & 1 to sample on rising and falling of
the clock.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-28 10:21:59 +02:00
7b0a57fd1c
ols: add swap channels feature
...
Allow channel groups to be swapped. This is useful
for demux at 200mhz with the unbuffered channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-28 10:21:59 +02:00
de52409982
ols: Display noise filter flag
...
Show if noise filter is on. This is important to be
sure is off for demux mode.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-28 10:21:59 +02:00
00d04d3b0e
ols: Fix RLE count handling
...
The high bit of the sample, denoting this is a count, was not getting
properly cleared. This resulted in an inevitably negative count, and
corruption of the sample buffer before it was transferred to the
frontend.
2013-08-27 00:33:20 +02:00
abb39e6b8c
ols: Properly initialize entire single-sample buffer before start
...
The single sample buffer, up to 4 bytes long, was not getting initialized
on (every) acquisition start, only after the first full sample was in.
This caused the first sample to potentially hold garbage.
2013-08-26 23:42:09 +02:00
eb1b610b12
ols: add external clock support
...
Add external clock support that allows you to use the tracing
targets bus clock line for sampling.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-26 10:28:45 +02:00
967760a893
ols: add test mode support
...
ols allows both external and internal test patterns at ~20khz
which are helpful for unit tests and demos.
pattern=internal -> route pattern internally to all 32 pins
(input otherwise disabled)
pattern=external -> generates pattern on unbuffered pins 16:31
(which can be looped back to the buffered pins 0:15)
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-26 09:52:24 +02:00
503133bb5f
ols: fixed parallel stage triggers
...
Stage count was always getting incremented one more than
actual stages, and this caused a extra stage with zero'ed data
probe lines to have the start bit field.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-26 09:48:41 +02:00
d0107565c1
saleae-logic16: Drop unneeded NUM_PROBES.
2013-08-21 11:41:21 +02:00
87b537ced0
saleae-logic16: Shorten dev_list() implementation.
2013-08-21 11:37:40 +02:00
96484e22b4
saleae-logic16: Whitespace fixes, cosmetics.
2013-08-21 11:33:37 +02:00
186dde8d72
saleae-logic16: Cleanup the prime_fpga function
...
The driver should now work on any Logic16.
2013-08-20 19:55:57 +02:00
fec7aa6a44
saleae-logic16: Update copyright blurbs.
...
Copied copyright lines from fx2lafw driver, since much of the code is
taken from there.
2013-08-20 19:55:57 +02:00
db11d7d2d0
saleae-logic16: Add voltage threshold conf.
2013-08-20 19:55:57 +02:00
b117363ad7
saleae-logic16: Declare confs.
2013-08-20 19:55:57 +02:00
7b5daad45c
saleae-logic16: Implemented acquisition.
2013-08-20 19:55:57 +02:00
15abcf0f58
saleae-logic16: Initialize the FPGA.
...
The map_eeprom_data function is currently unknown. The map entries
provided were observed via bus-snooping of the vendor software on my
device. Other devices may need additional values.
2013-08-20 19:55:57 +02:00
5eea4305ad
saleae-logic16: Reworked scan/open to handle FW upload.
...
The new code is based on code from the fx2lafw driver.
2013-08-20 19:55:57 +02:00
f6a21fa50c
saleae-logic16: Detect the hardware.
2013-08-20 19:55:57 +02:00
c463dcf06c
saleae-logic16: Initial driver skeleton.
2013-08-20 19:55:22 +02:00
56e76981bc
uni-t-dmm: Require conn parameter for scan
...
Since the uni-t-ut32x series handles devices with the same USB VID.PID,
which is linked to the WCH CH9325 USB/HID-UART interface chip, this
driver can no longer assume it can handle anything with this VID.PID.
2013-08-11 10:52:43 +02:00
d6ff054ae5
uni-t-ut32x: Full acquisition support
2013-08-11 10:46:36 +02:00
6513f97fbe
uni-t-ut32x: Flesh out driver
2013-08-11 10:46:36 +02:00
3877dde43a
uni-t-ut32x: Initial driver skeleton.
2013-08-11 10:46:36 +02:00
4a8bbed76d
center-3xx: Initial Center 309 / Voltcraft K204 support.
2013-08-08 19:59:49 +02:00
4433145f48
center-3xx: Initial driver skeleton.
2013-08-08 19:58:48 +02:00
ce95428cca
Consistent use of "IKALOGIC" spelling.
...
The company name is written all-caps pretty consistently on the
vendor website and docs, so use that spelling everywhere.
2013-08-07 16:21:57 +02:00
b07b42f319
Cosmetics, typos.
2013-08-07 16:21:57 +02:00
e11a1ebacc
alsa: Fix double-free issue.
...
This fixes bug #129 .
2013-08-07 16:21:56 +02:00
4d7ddff75b
uni-t-dmm: Fix UT61E bug related to the UNI-T UD-D04 cable.
...
This fixes bug #136 .
2013-08-06 23:36:16 +02:00
c51bbdec34
Drop nexus-osciprime skeleton for now.
...
This is mostly just a skeleton driver framework at the moment, we'll
bring it back when the driver is fully implemented.
2013-08-05 12:59:23 +02:00
c93ebace30
uni-t-dmm: Drop DMM table (comment).
...
This info is in the wiki already, no need to duplicate in the code.
2013-08-02 01:02:03 +02:00
faf720246a
ols: Workaround for mac os X stray events
2013-08-01 19:48:07 +02:00
ce4d26ddf9
Various cosmetics, whitespace, consistency fixes.
2013-07-31 13:09:48 +02:00
2b691be806
serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
...
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).
However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
e84e0096db
Fix build
2013-07-16 17:18:20 +02:00
b979d0c9cb
kecheng-kc-330b: Code cleanup
2013-07-16 17:17:54 +02:00
d406dccd6a
lascar-el-usb: Don't close device after acquisition
2013-07-16 16:08:38 +02:00
85ed4ab3ba
kecheng-kc-330b: Acquisition from stored logs
2013-07-16 16:08:38 +02:00
f336618c3d
kecheng-kc-330b: Check device status before acquisition
...
Can't really count on it either way though, the device is just
too flaky to conclude whether it's going to work or not, regardless
of the status returned.
2013-07-16 16:08:38 +02:00
df03552894
kecheng-kc-330b: Live SPL acquisition
2013-07-16 16:08:38 +02:00
bc7be4a9f4
kecheng-kc-330b: Implement all SR_CONF options
2013-07-16 16:08:38 +02:00
a8806f032c
kecheng-kc-330b: Flesh out driver, add scan functionality
2013-07-16 16:08:38 +02:00
ed759a0835
kecheng-kc-330b: Initial driver skeleton.
2013-07-16 16:08:38 +02:00
ab4bb6eb7c
ikalogic-scanaplus: Initial driver implementation.
2013-07-16 01:01:11 +02:00
fdf4a1f5a0
ikalogic-scanaplus: Initial driver skeleton.
2013-07-15 12:20:53 +02:00
a7a163a795
Support for UNI-T UT60A/E multimeters via RS232 or USB
2013-07-09 22:57:55 +02:00
fb8d593cfe
Use GET_REPORT request for device to host transfer.
2013-07-05 14:01:06 +02:00
c134574938
uni-t-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
6045b91aa4
serial-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
cea26f6e9f
cem-dt-885x: Support for retrieving stored samples
2013-06-20 14:35:34 +02:00
662172d4f4
cem-dt-885x: Support for SR_CONF_DATA_SOURCE
...
This device can do both live and memory-based acquisition.
2013-06-19 12:23:30 +02:00
4c22355f04
cem-dt-885x: Support for powering off the device
2013-06-17 16:17:39 +02:00
f157b2eebb
cem-dt-885x: Support for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
0cd9107dfb
cem-dt-885x: Fix datalog on/off setting in max/min hold mode
...
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
2013-06-17 16:17:39 +02:00
a90e480cdc
cem-dt-885x: Support for max/min hold modes
2013-06-17 16:17:39 +02:00
1487ce4fbc
cem-dt-885x: Support for changing time weighting
2013-06-17 16:17:39 +02:00
be73391982
cem-dt-885x: Support for changing frequency weighting
2013-06-17 16:17:39 +02:00
e1af0e85b9
cem-dt-885x: Support for turning data logging on/off
2013-06-17 16:17:38 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
14cf708fef
cem-dt-885x: Send last measurement at normal rate in hold mode
...
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
2013-06-12 18:34:42 +02:00
bc1143280f
cem-dt-885x: Hold off measurements in max/min hold mode
2013-06-12 18:34:42 +02:00
e37c4b3959
cem-dt-885x: Live SPL acquisition
2013-06-12 18:34:42 +02:00
7fb8279c9b
cem-dt-885x: Flesh out driver, add scan functionality
2013-06-12 18:34:42 +02:00
Uwe Hermann
Martin Ling
Bert Vermeulen
Aurelien Jacobs
Matthias Heidbrink
poljar (Damir Jelić)
Matthias Heidbrink
Russ Dill
poljar (Damir Jelić)
Dan Horák
Sean Young
Daniel Thompson
Matt Ranostay
Marcus Comstedt
Florian Knodt
Marc Schink
Florian Steinhardt