d8e3685c47
free USB config descriptor after use
2013-01-21 23:32:49 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
9a5693a5ac
unify sr_datafeed_meta_* into one struct containing sr_config
...
struct sr_config is the new name for sr_hwopt. Its companion meta
struct, sr_hwcap_option, was renamed sr_config_info.
2013-01-21 23:32:49 +01:00
86c02e6554
serial.c: Fix copy-paste error.
...
Thanks Bert Vermeulen for reporting.
2013-01-21 01:47:30 +01:00
9d8fde40c3
uni-t-dmm: Quickfix for UNI-T UT61D.
...
This is a temporary fix only, since a major rework of uni-t-dmm is being
done at the moment, soon to be merged.
2013-01-21 01:45:02 +01:00
5edc02c77c
Add missing "ULL" suffixes.
...
These numbers are larger than 32bit, mark them as ULL to avoid compile
failures on 32bit systems.
2013-01-20 20:39:18 +01:00
73365eaed0
uni-t-dmm: Expose hwopts.
2013-01-20 19:57:04 +01:00
388f9d3e25
uni-t-dmm: Fix scanning, properly use new sr_usb_find().
2013-01-20 19:55:33 +01:00
4ebd48b352
Remove non-error hw_info_get() messages.
...
Currently hw_info_get() can receive requests for entries (info_id) that
the specific driver doesn't support. That is (right now) a valid
use-case and not an error (might change later, though).
Thus, for now, don't output messages for such requests at all (certainly
not as sr_err() where they show up in e.g. sigrok-cli output per default).
2013-01-20 18:48:02 +01:00
a978eda2c9
udev: Add UNI-T UT-D04 multimeter cable entry.
2013-01-20 18:47:35 +01:00
7d39e2105f
configure.ac: Drop AC_PROG_CXX.
...
We don't need a C++ compiler for libsigrok, so don't check for one.
This would cause a build failure on all systems where there is a C compiler
but no C++ compiler installed.
2013-01-19 21:20:56 +01:00
294245ecf2
README: Document alsa (optional) library.
2013-01-19 19:13:52 +01:00
b97cbca6c9
serial.c: OpenBSD doesn't have B460800.
2013-01-19 15:55:22 +01:00
262dd3e47d
configure.ac: Drop gthread check, no longer used.
...
We no longer use gthread (its only user was the 'demo' driver), so drop
the 'configure' check for it.
The libsigrok.pc pkg-config file is still correct, since the 'configure'
result propagates there automatically.
2013-01-16 01:31:46 +01:00
3d6de074a4
alsa: Silence ALSA scanning process.
...
Errors while opening or configuring ALSA devices during scan for devices
should not be shown by default (i.e., no sr_err() usage). Non-working
or non-accessible devices (due to permissions or other reasons) will
simply not show up in frontends. Use sr_dbg() instead of sr_err().
2013-01-16 00:02:24 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
bd58d8f3ec
Makefile.am: Fix typo in 'ChangeLog' target.
2013-01-14 11:13:58 +01:00
8a22e8c0ff
cosmetics
2013-01-14 00:59:46 +01:00
dbf2482ec1
add --disable-all-drivers option
...
Can be overridden by driver --enable options to build only those drivers.
2013-01-14 00:52:55 +01:00
512bb890df
rigol-ds1xx2: More selective Rigol DS1xx2 scan
...
Patch submitted by Martin Ling.
2013-01-13 22:42:21 +01:00
5635705c83
cleanup of obsolete definition
2013-01-13 18:07:05 +01:00
18bc270461
sr_session_save(): don't use datastore
2013-01-08 14:14:44 +01:00
6936ee4206
remove datastore functionality
...
Keeping a copy of acquired data is up to the frontend, not libsigrok.
2013-01-08 14:14:44 +01:00
305de92e9d
use a dynamically expanding probe list
2013-01-08 14:14:44 +01:00
cbc80f8f8a
fx2lafw: Say if chip is old FX2 or FX2LP
...
Look at the extracted REVID, and print out if it is an FX2 (non-LP), or FX2LP.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-08 03:44:36 +01:00
a24e9d0484
link-mso19: Use more portable g_htons().
...
Not all systems provide <arpa/inet.h> and/or htons(). Use portable and
always available g_htons() from glib instead.
2013-01-08 03:13:45 +01:00
753d722f34
link-mso19: Fix a bunch of compiler warnings.
2013-01-08 03:13:14 +01:00
00b44ccb8b
link-mso19: Fix white-space, cosmetics, coding-style.
...
Fix the bare minumum of whitespace/indentation/coding-style via
automatic 'indent' run, followed by some minor manual fixes.
Some more fixes and cleanups might follow later.
2013-01-08 03:13:08 +01:00
f48cef7897
link-mso19: Fix (C) lines.
...
Bring back the original (C) lines from before the split into api.c
and protocol.[ch].
Add "Copyright (C) 2013 Lior Elazary <lelazary@yahoo.com>" since there
were nontrivial changes to those files.
2013-01-08 02:30:40 +01:00
8472ae868e
configure.ac: Enable Link Instruments MSO-19.
...
This driver now compiles again and (partially) seems to work, so enable it.
2013-01-08 01:27:11 +01:00
eb913174ab
Added limit samples Eveything seems to work find up to 1024 samples
2013-01-08 01:00:14 +01:00
087a9161ff
Rewrote the trigger config. Added trigger position and trigger slope
2013-01-08 01:00:14 +01:00
5a24e89ca4
Eveything seems to work now except for triggers.
2013-01-08 01:00:14 +01:00
4db2aaffe7
More cleanup. Communication with mso19 is working, but its not triggering. Need to check why.
2013-01-08 01:00:13 +01:00
26ddb5baca
Added flow control to serial configuration to support xon/xoff for link-mso19
2013-01-08 01:00:13 +01:00
4b719338cc
Added missing mso functions
2013-01-08 01:00:13 +01:00
def5c35c4c
Removing the old link-mso19 files and changing makefile
2013-01-08 01:00:13 +01:00
df92e5cf6b
Rewrote the link-mso19.c into api and protocol. Still need to test and cleanup some more
2013-01-08 01:00:13 +01:00
26e6ef346d
Add gnuplot_rigol_ds1xx2.gpi gnuplot script.
...
This is a very simple gnuplot script for testing the Rigol DS1xx2 driver.
It currently has various issues and limitations (e.g. only one channel
is displayed, the scaling is not usable, and so on) to be fixed later.
2013-01-03 19:17:51 +01:00
29d957ceae
rigol-ds1xx2: Cosmetics, whitespace.
2013-01-03 19:04:11 +01:00
fb6e5ba8c7
rigol-ds1xx2: Autoprobe for usbtmc devices on Linux.
2013-01-03 18:41:29 +01:00
4e108ace13
rigol-ds1xx2: Fix setting trigger parameters.
2013-01-03 18:41:29 +01:00
542843f76f
rigol-ds1xx2: Assorted parameter setting fixes.
2013-01-03 18:41:29 +01:00
e0b7d23ce8
rigol-ds1xx2: First working version.
...
Currently hardcoded to use /dev/usbtmc1. Analog data readout works.
2013-01-03 18:41:29 +01:00
f4816ac6cc
rigol-ds1xx2: Initial driver skeleton.
2013-01-03 18:41:28 +01:00
aeabd30820
ols: Implement SR_DI_HWOPTS.
2013-01-03 02:15:27 +01:00
986fde755d
serial-dmm: Add UNI-T UT61E support (UT-D02 cable).
2013-01-03 01:13:57 +01:00
fe0c0b98c6
Add Cyrustek ES51922 DMM chip parser.
2013-01-03 01:13:06 +01:00
21d3d4ee87
alsa: Add some more samplerates.
...
Add some more samplerates that seem to be supported by some devices
(found via random grepping of alsa and kernel sources).
2013-01-01 00:37:18 +01:00
a1b9a9bf44
alsa: Add missing % for PRIu64.
2013-01-01 00:37:17 +01:00
Bert Vermeulen
Uwe Hermann
Alexandru Gagniuc
lelazary
Martin Ling